Fields of the material BOM are overwritten by values from customising.

I have the an issue wherein I am trying to update a material BOM, and I pass a blank value to REL_COST (or SANKA ) in item. But somehow in the function module CSAP_MAT_BOM_MAINTAIN it gets defaulted to X while posting the BOM update.
When I use the function module CSAP_MAT_BOM_CREATE to create BOM it works fine. I see there is OSS note 1012556, but looks like it is valid for different function module CDESK_BOM_WIZARD, which is relevant to my scenario. However that function module is for dialog mode and not released yet.
I pass below values to T_STPO structure, rest all fields are initial. 
 
ITEM_CATEG L 
ITEM_NO 0020 
COMPONENT 4000018468 
COMP_QTY 300.000 
COMP_UNIT EA 
FIXED_QTY 
ITEM_TEXT1 TEST 
ITEM_TEXT2 TEST 
REL_COST 
MAT_GROUP 241416W1 
ID_ITM_CTG L 
ID_ITEM_NO 0020 
ID_COMP 4000018468

I have this same issue.
I found a workaround, passing "!" instead of space when I want to reset fields such as cost relevancy, text1 and text2. My issue is on CSAP_BOM_Maintain.
So for your solution, you just call the same function 2x with same values?

Similar Messages

Plant specific fields in the material master for product move

Hi, SAP gurus,
My scenario is we are moving a existing product in US plant to Brazil plant. What are the fields in the material master that are specific to a plant that will change. For ex MRP controller will change from plant to plant. Like that can anybody please provide me a list of fields that i need to be looking at?
Thank you
Anusha

Hi Anusha,
First of all, list down all your materials those you want to extend to new plant.
a) Secondly, pay attention to those fields you will find "filled" in those materials at plant level.
b) MARC comes handy for you to analyse which fields are at plant level.
Intersection of fields with values between a and b are the ones you need to work out.
Good luck,
Regards

BOM - Standard report to view the material - BOM relationship

Hi
Our client has a requirement to view the material - BOM relationship. The input will be the material and the report should display all the levels above the material. Say for example if the material is in level 5, it should display the BOM strucutre from level 0 to level 5. If the same material is in various levels, the structure should map from level 0 to the lowest level of the material.
Is there any standard report/function available for the above requirement.?

Hello Venkatachalam
As eariler related to BOM level wise you posted a quiery on SDN ....
I having Similar quiery as per yours...... I need your help.
Is it possible for you to make a telephonic conversation so i may provide you proper details .
With Regards
DhruvOM
Phone number :-+919765032999

Adding a Z field in the material master at the plant level

Hi,
I want to add a new text field in the material master.
The data maintained inthis field should be easliy retrievable using some STD SAP Report or using Abap query ( SQ01/SQ02)
Please advise how do i do it.
Regards,

Hi,
I want to add a new text field in the material master.
The data maintained inthis field should be easliy retrievable using some STD SAP Report or using Abap query ( SQ01/SQ02)
Please advise how do i do it.
Regards,

Tax classification field of the material master - Mandatory

At the "Sales: sales org. 1" view of the material, there exist the tax classification field of the material master. How can I make this field mandatory?

Hi
Go to T-code OMSR
Select Field name MARA - TAKLV and click on the arroow sysmbol on the right against that line.
For Field Ref MM01 - select the radio button "Reqrd Entry".
Hope this answers your question
Regards
Madhu

How I can stop the combo box with list of values from fireing validations

Hi I'm using Jdeveloper 11.1.2.3.0
Using Hr Schema employees table
I Display employees data in af:table
and I make List Of values on Department_id filed to easy change the employee department
and another one on Job_id filed
and Imake them UI Hints as ( combo box with list of values ) in the employeesVO
the problem is when I Select a value from department or jobs ( combo box with list of values )
fires the entire filed validations for mandatory atributes
Note : the af:table Property ( contedelivery) is set to (immediate )
How I can stop the combo box with list of values from fireing validations

check it out.,
http://andrejusb.blogspot.in/2012/09/what-to-do-when-adf-editable-table.html

Query regarding fields in the material master

Hi Gurus,
We have a requirement where client wants to know the relevance of u201CBasic data textu201D and u201Cinspection textu201D tabs in material master (these appear when we click on additional data tab in material master) and also if we maintain text in these fields for a material where it will be reflected? for e.g where/in what transactions can we see these text appearing.
Please let me know the relevance of these two fields and where these can be reflected. It would be nice if you can also tell me the tables and fields for these two.
Regards,
Krishna Mohan

Hello
This text are maintained in tables STXH and STXL.
For fetch this texts use FM READ_TEXT with parameters:
ID = 'GRUN' - for Basic data text
ID = 'PRUE' - for inspection text
and for both texts
LANGUAGE = sy-langu
NAME = material number (with leading zeros)
OBJECT = 'MATERIAL'

Updating the Price Determination Field in the Material Master (MBEW-MLAST)

I'm doing a material conversion into an existing SAP system and the program to load the materials didn't load a value in the price determination field (MBEW-MLAST). Normally this field is required but because the conversion BAPI doesn't do as much validation as MM01 it was possible to create the record without a value. The field is not open to input when I use MM02, and even though it appears to work, when I do MM17 mass change the field is also not updated. Finally I tried transaction CKMM - Change Material Price Determination for Material Ledger but it required an entry in the Old Price Determination field and it won't let me enter blank.
We've since corrected the program but my problem is that I've converted about 5000 materials without a value in the field meaning the FI guys can't release cost estimates which is causing a bunch of problems for the testing that we want to do in this system. We've taken about 3 weeks to do this conversion so going back and doing it again is a terrible option. Does anybody know a way to get a value into this field other than what I've mentioned above (MM02, MM17, CKMM)?
Suggestions please.

have a look into OSS Note 1491364 - BAdI CKML_SET_VPRSV: Price determination cannot be changed

Some Date Time fields on the IW32 screen are not editable

In Netweaver, we are using IW32 - Change PM Orders. But the date and time fields for ACTUAL START and ACTUAL END are dimmed, and users cannot type values in them. Please tell me how I can configure our system to allow for editing in these fields.

Hi,
the date picker is a widget from the current OS and there seems to be no way to enter the upper levels of that widget to select another year; when it is executed within Acrobat/Reader.
Under Windows 7 you generally can use Ctrl + Up to select the upper levels of the date picker (months, years, decades), but not so within a PDF.
But you still can enter the date with the keyboard, so this is not such big barrier.

Quantity field of the material

Hi ,
From which table i can get the quantity of the material .
In MARA i have seen INHBR and INHAL .
Regards,
Ratheesh BS

Hi,
If it is the stock quantity you want it is in table MARD in the following fields
LABST
UMLME
INSME
EINME
SPEME
RETME
Darren

FCP X freezes and must force quit? I have a FCP installed on a Mac Mini (4 gig memory) and Lion OS. The import files are large ACVHD files from a Canon G10 camera. FCPX freezes and requires a force quit. Is anyone else having these problems?

I am using FCP X on both a MacMini (10.7 with 4 Gig memory) and an iMac (10.6 with 4 gig memory). The files are ACVHD files imported from a Canon G10 camcorder. FCP is constantly freezing and requiring a forced quit. Could it be that FCP X was not tested thoroughly for use on a Mac Mini?

I think it's safe to say that FCPX wasn't tested throroughly for use on anything.
with that out of the way, there are many variables as to what might cause your problems, but I don't think it's the mac mini as long as it meets the specified minimum requirements (especially the graphics card).
You might try creating a camera archive first and then importing from that.
The other issue might be the file format itself; you might need to use Clipwrap first. Maybe someone who has the same camera can chime in.

How to set the link to the result which are executed my query from database

Hi,
i have successfully displayed the results which are available in the database by jdbc, query.
Then, How to give the link like href to each & every result...
note: The number of records may be change. depending upon the records availablity in the database. but every result have the link.
Thanks in advance.
Regards
Kumar

hai kumar..
i post an example code ..
<%
ResultSet rs1=stmt.executeQuery("select fromu,subject,message,mdate,status,mesid from message where to='" + lname +"'" );
while(rs1.next())
l=rs1.getLong(6);
out.println("<tr align='center'> <td> <a href='deletemessage.jsp?mesid="+ l + "'>Delete </a></td><td>" + rs1.getString(1) +"</td><td> <a href='viewmessage.jsp?mesid="+ l +"'>"+ rs1.getString(2) +"</a></td><td>"+ rs1.getString(4) +"</td><td>"+ rs1.getString(5) +"</td></tr>");
%>

How to get the data by excluding the columns which are having null values

I have a table with 10 columns , 3 columns are having all null values . I want to retrive the data by excluding these 3 columns. That means output table should contain only 7 columns .
Can u give a query on this?
Thanks,
Mahesh

select <list of column with not null values>
from table_nameThat is you need to specify the column name.

Replication of Material Sales status (with user values) from ECC to CRM

Hi all,
I 'm trying to find out how to replicate the sales statuses of the material master data in ECC (in view "sales", field DChain spec. status, MKVE-VMSTA) to the Material SAles statuses in CRM.
The sales statuses in ECC have been maintained (via menu SPRO/logistics general/master data/basic settings/settings for key fields/DAta relevant to sales and distribution)) : new specific values have been added to the standard ones.
Then, this customizing has been replicated to CRM via the DNL_CUST_PROD3 repliction object ( table TVMS).
I have also created a user status profile with values in CRM with the same values, and assigned with the configurator the status profile to the screen, so the values are selectable in the sales status in CRM (in header).
But, now, how can i replicate the sales statuses of the ECC materials to either :
-the product status (header) in CRM, or
-the sales status (distribution chain specific) in the assignment block of the Distribution-chain specific data ?
Is a specific development needed?
there are some existing notes (623026, 428989, 495764), but not clear about what is possible in terms of replication of statuses
thanks a lot

It seems that there is no mapping between ECC and CRM sales area.
If u want to download customer from ECC for that u have to mention the customer sales area in to the filter and then u have to start down load from ECC.

Material Variant of a Config Material to take Charac. Values from Sales Ord

Hello Guys,
Is there any way to have a Material Variant for a Configurable Material to take the Characteristic values from a Sales Order instead of Material Master ?
I understand by default Material Variant has fixed characteristic values and is taken from material master......
however here is the situation am in.......
I have a completely MTO scenario where we will making the product from scratch only after we know the characteristic values.......however our Costing Guys want to do standard cost estimate for the Configurable Material somehow......they were able to do Cost Rollup by making the Configurable Material itself as the Material variant of itself (assigning the same Configurable Material # in MRP3 view)............however this broke my design of taking characteristics from the Sales Order...because the Configurable Material is now behaving as Material Variant and taking the default characteristic values from the Material Master....
Note: Our Costing guys donot want to cost settlement at Sales Order level.
Regards,
BRN.

I had exactly the same problem. (configuration "blocked" in SO because the use of material variants for PC purposes...)
SAP help says : To allow you to change the configuration of material variants in the sales order, the Configuration allowed or required indicator must be set in Customizing for Sales and Distribution. The requirements class is determined using the strategy group and requirements type defined in the material master.
The req. class parameter, mentioned not very clearly by the SAP help, that allows changing the characteristic values of a material variant during the SO configuration is V_T459K-KONFI and value must be either * or +
Hint: A quick check can be done In the SO entry: go to the procurement tab and replace your requirement type by KEL, you'll see that configuration is "open"
Hope this helps
Iñaki
Edited by: InakiGonzalez on May 11, 2009 8:08 PM
Edited by: InakiGonzalez on May 11, 2009 8:15 PM

Fields of the material BOM are overwritten by values from customising.

Similar Messages

Maybe you are looking for