Fifth Third Bancorp to Consolidate Up to 100 Branches

Fifth Third Bancorp FITB -0.43 % said it plans to consolidate or sell about 100 of its branches and about 30 other properties, a move that comes as mobile and electronic banking grow in popularity. http://www.wsj.com/articles/fifth-third-bancorp-to-consolidate-up-to-100-branches-1434973517    

It is a mortgage account, it was sold to 5th third about five years ago, and it has been hell dealing with them.I would try to move it, but thanks to them I am stuck until I can get 2 years without lates showing up! They are the worst I ever had to deal with, they treat me like I am the problem, I have to run around, get my bank staements showing the cashed check and fax it to them, they never fix the lates even after they fix the account payment data! So as much as it sucks, I now make that trip so I can have the reciept in my hand from the teller, and I make sure they have the account right while I am there.  

Similar Messages

  • Cannot load cancelled check images on Fifth Third Bank site

    ''Duplicate post, continue here - [/questions/755742]''
    Running Windows XP Profess. Serv. Pack 3 with Mozilla 3.6.10. Log into Fifth Third Bank site. Choose to display checking account information. Click on a check #. "An Error Has Occurred. If the problem persists, please contact a Customer Service Professional at 1-800-XXX-XXXX." Use IE Explorer, can display cancelled check images....no problem. According to Fifth Third Bank site, acceptable browsers include Mozilla 2.X and newer.

    Fifth-Third did a major upgrade this past weekend, if you are seeing any differences in their services now in comparison to last week contact them.
    I can't comment about your particular issue, because I haven't used that feature to view canceled check images in the last few years.
    The change that I noticed was that the Username / Password on the Login page now has '''''autocomplete=off''''' which is a good change, IMO. Also, I had to change my online password (some were lost during the transition they told me). I was able to get Firefox to save the new password (using the popular bookmarklet), but it won't autofill properly not matter what I try - at least the User ID does.

  • Payrol - HRMS - Third Party Payments

    Hi to all
    My client has a third party payment that paid out to employees twice and I
    dont understand why. Can someone assist.
    I have checked element link input values for costed / not costed checks on "amount" and "Input value" - only Input value is costed. Cool
    I have checked the payment method for the third party org - its set to 100%
    There is a "Once_Per_Period" skip rule on the element - so it shouldn't pay twice
    Could this be something wrong with the Fast Formula? I am new to Fast Formula,
    what condition statement should I be looking at for something that would cause an element to pay twice?
    Thank you so much in advance
    Aida

    Erik,
    Boy, this is unusual. I would recommend opening a service request with Oracle support and see what they say. There is a credit card/procurement card process in EBS 11, but it is more of a workflow type of thing. Would not be tied in to purchase orders. That is the hard part. And to get a credit card invoice where some stuff is for matching to POs and some is for non-PO stuff. You might be better off making a PO a requirement for everything. Otherwise you might have a mess on your hands. Or you could revise your process to use the Oracle workflow process and require the appropriate approvals for paying the credit card bill items. That basically takes care of what purchase orders are doing for you, in requiring some kind of approval process. Something to think about.
    John Dickey

  • Flash E-Card Design Contest!

    This is EkkoBlue Media Studios, a design studio working with
    Universities and Design Colleges to bring you a Flash E-Card Design
    contest.
    The goal of this contest is to design animated Flash E-Cards.
    Treat these E-Cards as you would real greetings cards (Except
    Flashed and Pizzazzed!). These cards may be designed for special
    occasions, holidays, or just for fun. This is a great chance for
    animators, coders, musicians, etc, to collaborate and create some
    interesting artwork.
    We have a class based ranking system. First class award
    winners are given 2000$ each. Second class award winners are given
    1000$ each. Third class award winners are given 100$ each.
    Please visit us at:
    http://www.ekkoblue.com.
    Our website is VERY detailed and contains a lot of
    information about the contest we are running.
    The contest is open to participants from around the world.
    The contest is open for registration. Official submissions
    are accepted starting on August 5, 2008. Please feel free to e-mail
    us at [email protected] for information, reply to this forum post,
    or use the Contact Us form on our website with ANY questions or
    concerns you may have.
    Thank you.

    It doesn't matter how long you've been a member of these
    forums. If you've been a member for any length of time, you should
    know about the forum guidelines and any advertisement or effort to
    have people become involved in something is considered spam.

  • Ipod 5 will not boot up from no batteries even though it has been charging for 30 minutes.

    I bought an iPod Touch 5th generation in December 2013. It is completely out of batteries and when I plug it in it says it's charging but never boots up. Now when I plug it in the iPod doesn't even show the dead batterie sign. I have tried multiple adapters that are certified by Apple but the two USB to Thunderbolt cables I've tried are not certified by Apple. Could it be the uncertified cables are is it a bad batterie? I don't want to buy an overpriced apple cable to find out it's the iPods fault. I have cleaned out the port in my iPod and all the connection that could be faulty, unfortunately I do not have another IOS device that supports Thunderbolt so I can't tell if it's the cables fault. I will probably ask to borrow someones fifth generation device although I am almost 100% certain that it is not the cables fault.

    What do you mean by:
    - "multiple adapters that are certified by Apple"? Do yo mean wall charger?
    - "USB to Thunderbolt cables"? A Lightning cable plugs into the iPod
    Yes, a bad USB to Lightning cable can result in no charging. Also, some non-Apple cables do not work.
    Not Charge
    - See:    
    iPod touch: Hardware troubleshooting
    iPhone and iPod touch: Charging the battery
    If you can’t charge your iPhone, iPad, or iPod touch
    - Try another cable. The cable for 5G iPod (lightning connector) seems to be more prone to failure than the older cable.
    - If a 5G iPod               
    Iphone 5 lightning port charging problem - SOLUTION!
    - Try another charging source I think you already did did this
    - Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
    - Make an appointment at the Genius Bar of an Apple store.
      Apple Retail Store - Genius Bar
    If necessary:
    Try:                                               
    - iOS: Not responding or does not turn on           
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try another cable                     
    - Try on another computer                                                       
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
      Apple Retail Store - Genius Bar

  • How to add a column in report painter

    Hello
    i have a profit centre report where i have the profit centre group name in the header and i want to move it to column.
    could you please let me know how to do this?
    Thanks

    HI  Pradeep,
    Goto the transaction code (Change Report) GR32.
    Give you library name and report name
    And click on the column (application tool bar or F7) button then place the curser on the screen where you want column (please note you have to keep curser on the header section u2013Red column text) right click and insert element. Then you select formula as selection element  and enter. You will get the enter formula box. Then you can type your formula and continue. This will add new column to the report.
    How to enter formula: you can see the formula components in that id and description.
    Id is columns that are present and description indicates explanation of that column.
    Enter formula according your requirement.
    Examples:
    Enter formula screen:
    ID :    des
    X001  amount
    X002  pt000
    X003  test
    1. Enter formula as: ( X001 u2013 X002)
    The above formula is for fist column u2013 second column.
    2. ( ( X001 u2013 X002) / X003) * 100
    First column u2013 second column and devide by third column after that multiple with 100.
    Hope this will help you
    Regards
    Manohar

  • How to add new column in Report ME2L

    Dear Sir,
    We are using ME2L for various purposes . In the ME2L report we need to add 2 new columns i.e Item Delivery Date and WBS Element .
    Although in the standard ME2L report , after the basic list generation , there have been provided 2 icons for getting the report displayed  with either WBS Element or with Delivery Date .  It means we can not get both the column Delivery Date and WBS Element  available simultaneously in the standard ME2L report .
    We request you to kindly guide us as how can we add these column in the ME2L report pl .  We are on ECC-6.0 and not having enhancement package 4.0 .
    Kindly help us pl .
    Regards
    Sonia Agarwal

    HI  Pradeep,
    Goto the transaction code (Change Report) GR32.
    Give you library name and report name
    And click on the column (application tool bar or F7) button then place the curser on the screen where you want column (please note you have to keep curser on the header section u2013Red column text) right click and insert element. Then you select formula as selection element  and enter. You will get the enter formula box. Then you can type your formula and continue. This will add new column to the report.
    How to enter formula: you can see the formula components in that id and description.
    Id is columns that are present and description indicates explanation of that column.
    Enter formula according your requirement.
    Examples:
    Enter formula screen:
    ID :    des
    X001  amount
    X002  pt000
    X003  test
    1. Enter formula as: ( X001 u2013 X002)
    The above formula is for fist column u2013 second column.
    2. ( ( X001 u2013 X002) / X003) * 100
    First column u2013 second column and devide by third column after that multiple with 100.
    Hope this will help you
    Regards
    Manohar

  • New column to report painter

    Hello ABAP Gurus,
    There is a report created with Report Writer (S_ALR_87013000) and I should add some extra columns to the end of it. The problem is that the new columns are not contained by the basic keyfigures of Report Painter; they should be red from masterdata: different fields from table AUFK.
    How can I add these columns? Is it possible to define own keyfigures? Or is any other way to enhance this report?
    Thanks,
    Krisztian

    HI  Pradeep,
    Goto the transaction code (Change Report) GR32.
    Give you library name and report name
    And click on the column (application tool bar or F7) button then place the curser on the screen where you want column (please note you have to keep curser on the header section u2013Red column text) right click and insert element. Then you select formula as selection element  and enter. You will get the enter formula box. Then you can type your formula and continue. This will add new column to the report.
    How to enter formula: you can see the formula components in that id and description.
    Id is columns that are present and description indicates explanation of that column.
    Enter formula according your requirement.
    Examples:
    Enter formula screen:
    ID :    des
    X001  amount
    X002  pt000
    X003  test
    1. Enter formula as: ( X001 u2013 X002)
    The above formula is for fist column u2013 second column.
    2. ( ( X001 u2013 X002) / X003) * 100
    First column u2013 second column and devide by third column after that multiple with 100.
    Hope this will help you
    Regards
    Manohar

  • How to add new column in report painter

    Hi Experts,
    I want to add new column in report painter which as to calculate the previous column . value in the new column should be the precentage of previous column existing on left side...

    HI  Pradeep,
    Goto the transaction code (Change Report) GR32.
    Give you library name and report name
    And click on the column (application tool bar or F7) button then place the curser on the screen where you want column (please note you have to keep curser on the header section u2013Red column text) right click and insert element. Then you select formula as selection element  and enter. You will get the enter formula box. Then you can type your formula and continue. This will add new column to the report.
    How to enter formula: you can see the formula components in that id and description.
    Id is columns that are present and description indicates explanation of that column.
    Enter formula according your requirement.
    Examples:
    Enter formula screen:
    ID :    des
    X001  amount
    X002  pt000
    X003  test
    1. Enter formula as: ( X001 u2013 X002)
    The above formula is for fist column u2013 second column.
    2. ( ( X001 u2013 X002) / X003) * 100
    First column u2013 second column and devide by third column after that multiple with 100.
    Hope this will help you
    Regards
    Manohar

  • Integration Builder Memory Consumption

    Hello,
    we are experiencing very high memory consumption of the Java IR designer (not the directory). Especially for loading normal graphical idoc to EDI mappings, but also for normal idoc to idoc mappings. examples (RAM on client side):
    - open normal idoc to idoc mapping: + 40 MB
    - idoc to edi orders d93a: + 70 MB
    - a second idoc to edi orders d93a: + 70 MB
    - Execute those mappings: no additional consumption
    - third edi to edi orders d93a: + 100 MB
    (alle mappings in same namespace)
    After three more mappings RAM on client side goes on 580 MB and then Java heap error. Sometimes also OutOfMemory, then you have to terminate the application.
    Obviously the mapping editor is not quite will optimized for RAM usage. It seems to not cache the in/out message structures. Or it loads for every mapping very much dedicated functionality.
    So we cannot really call that fun. Working is very slow.
    Do you have similar experiences ? Are there workarounds ? I know the JNLP mem setting parameters, but the problem is the high load of each mapping, not only the overall maximum memory.
    And we are using only graphical mappings, no XSLT !
    We are on XI 3.0 SP 21
    CSY

    Hii
    Apart from raising tablespace..
    Note 425207 - SAP memory management, current parameter ranges
    you have configure operation modes to change work processes dynamically using rz03,rz04.
    Please see the below link
    http://help.sap.com/saphelp_nw04s/helpdata/en/c4/3a7f53505211d189550000e829fbbd/frameset.htm
    You can Contact your Basis administrator for necessary action

  • How to add external call from Report Painter

    Hi experts,
    I'm working on a report painter, and I need to do an external call, from the generated code.
    add something like this    PERFORM Z_CALCULO_IMPORTE_COMPENSADO(ZCASS_FFMRBCS)
                                                                                    USING CUR-TAB
    Is there any way to do it without an SSCR key?
    Thanks in advance

    HI  Pradeep,
    Goto the transaction code (Change Report) GR32.
    Give you library name and report name
    And click on the column (application tool bar or F7) button then place the curser on the screen where you want column (please note you have to keep curser on the header section u2013Red column text) right click and insert element. Then you select formula as selection element  and enter. You will get the enter formula box. Then you can type your formula and continue. This will add new column to the report.
    How to enter formula: you can see the formula components in that id and description.
    Id is columns that are present and description indicates explanation of that column.
    Enter formula according your requirement.
    Examples:
    Enter formula screen:
    ID :    des
    X001  amount
    X002  pt000
    X003  test
    1. Enter formula as: ( X001 u2013 X002)
    The above formula is for fist column u2013 second column.
    2. ( ( X001 u2013 X002) / X003) * 100
    First column u2013 second column and devide by third column after that multiple with 100.
    Hope this will help you
    Regards
    Manohar

  • Trying to understand this behavoir global ATP, Prod All.

    Hi Gurus,
    I'm using ECC 6.0 and SCM 5.0. I have done all the settings necessary to run a gATP from SCM. The gATP method is Check Against Product Allocations.
    I have a product allocation procedure with THREE STEPS, for the first TWO STEPS I have an allocation of 1000 TM during weeks 24, 25, 26.
    In the third step I have allocations of 100 TM, 100TM, 300 TM during weeks 24,25,26.
    When I execute the ATP check for an order with 500 TM requirement I have the following schedule lines as response from APO:
    Week 24 - 100 TM
    Week 25 - 100 TM
    Week 26 - 300 TM
    But if I check the /SAPAPO/AC42 for the first two steps of the product allocation procedure I see 500 TM in week 24.
    For the third step I see 100, 100, 300.
    Is this a correct behavoir?, I think I should see the same quantities in the three product allocation groups.
    I appreciate you kind help
    Points wil lbe rewarded to helpful answers
    -Italo

    Hi Hugo,
    You are getting correct behaviour from the system.
    The final confirmed quantity is the minimum quantity confirmed of the individual product allocations steps. hence when you performed ATP check for order it gave you result of 100, 100 and 300 for week 24, 25 and 26.
    You can check same behaviour in APO by using transaction /SAPAPO/AC02.
    In transaction /SAPAPO/AC42, it just shows the product allocation for each step. And hence shows 500 as allocation in first two steps and same as order ATP check for third step.
    Regards,
    ~Vaibhav

  • Problem with 3rd party bluetooth keyboard

    I just purchased a third party bluetooth keyboard (RockSoul BT-100).  Unfortunately, when paired with my MacBook (2009 aluminum unibody running Mountain Lion), neither the Escape nor the FN key works.  Any suggestions?  Do I need a special driver?

    Hello:
    I suggest you contact the manufacturer of the third-party device.
    Barry

  • Sony Ericsson W960i - Can't Sync

    I just purchased the W960i, and I can't find any support or viable plugins so I can sync my Address Book, and iCal. What can I do? I would have purchased the iPhone, but it will not be available in my host country for at least another year. I really need to be able sync for my work. HELP!!!

    K800 syncing is still working fine - there are no issues with any iSync updates. Your K800 syncing problems are almost certainly solvable and due to iSync's History needing resetting or some corruption in either your Contacts or Calendars.
    The K800 and W960 are completely different phones with a different OS.
    So far, no one yet, neither Apple, Sony Ericsson or a third-party has created a fully 100% working for everyone iSync Plugin for any of the new Symbian Sony Ericsson phones, such as the W960, P990, M600, P1i etc.
    Sony Ericssons own iSync Plugins for these phones do not work reliably for many, or at all for others.
    The W960 Plugin you've found is just a 'hacked' Sony Ericsson P1/P990 one, which is why it suffers from the same issues as the other Symbian-based phones.
    Because syncing of these phones is so flaky, unreliable and inconsistent across Macs and different users, that's also why you haven't seen any professional iSync Plugins from any of the usual providers. They're not going to release something that doesn't work 100% at all times and for all users.

  • Recording with audio playback slowed down 65% what speed do I need to speed the video back up to to get it into real time?

    Ive recorded a test video with audio/music playback slowed down 65% what speed do I need to speed the video back up to to get it into "real" time?
    If I'd slowed the audio playback down 50% I would make the video 100% faster.
    If I'd slowed the audio playback down 100% I would make the video 200% faster.
    So its obviously somewhere inbetween speeding up by 100-200%
    Sorry but its melting my brain today and I cant remember the calculation.
    thanks

    hey all
    Thanks for the advise on this. I will explain a little more what am have/am intending to do.
    I have used Audacity to slow the song down (Effect>Change Tempo)
    Audacity will allow me slow the original song down by up to 99% (Or anything in-between up to 3 decimal places)
    Unfortunately I am working to a time restraint of 12 minutes per clip (as my DSLR will only allow up to a 12 minute clip).
    The song at normal speed is 4 minutes long.
    Originally I slowed the audio down by 50% (Making the audio 8 minutes long), lip synced to it using a rasta blaster and recorded the video using my DSLR at 720p 50fps.
    I then imported the video and audio I had been lip syncing to into FCPX.
    I sped up the video by x2 (equivalent to speeding it up 200%)
    Retime>Fast 2X
    Layered the PROPER normal speed audio back over the top and all was fine.
    Test video complete.
    (You can ignore the 65% slowed down audio I mentioned earlier if you like, that was just an example of a slower than 50% audio test)
    Firstly what I really want to do is to be able to slow the AUDIO down as much as possible (But still within the restraints of only being able to adjust FCPX retiming within a whole 1 percentage in the final video edit), but have the AUDIO of the song as near to/under 12 minutes as possible.
    I will then re-record the video again to this new slowed down audio.
    Secondly I will speed up the video from 12 minutes to 4 minutes.
    Thirdly I will layer the correct 100% Normal AUDIO on top.
    The FINISHED video should then look like everyone is wizzing around at high speed but the guitar playing/lyrics look like they are being played/sung at the normal speed.
    Whatever happens (due to the constraints of FCPX) I need the calculations to work so that FCPX is retimed exactly to a whole 1% for the final video to sync up correctly.
    So what I need to know in a nut shell is:-
    What calculation do I use to work out the percentage to slow a 4 minute song down to a 12 minute song?
    What calculation do I use to work out the percentage of how much I need to then speed the 12 minute video up to turn it back into a 4 minute video?
    My mind is melting

Maybe you are looking for