File adapter created file permissions at OS

Hi,
We have a file adapter scenario and once we run the scenario at OS level the file is being created with following permissions.
-rw-r----- 1 xisadm sapsys 19789000 Oct 10 17:01 File10024322.txt
So it is not being processed further till we change the permisions to -rw-rr .
Is there any place in XI where we can change to write the file at OS with -rw-rr permisions.
Thanks
Sunil

Moorthy,
This is XI writing the file at OS and not XI not reading the file.
But in one of our DEV env the file is being created with -rw-rr permissions after changed some thing , which we are not sure now. Now we have the same issue in production. Bye the way OS is AIX.
We would like is there any place in XI we can change so that XI can write the file to have "others" to read the file.
thanks
Sunil
Message was edited by: Sunil Guditi

Similar Messages

File Adapter - Create File Name from Payload

Hello,
I have a scenario where I'm sending deductions to external vendors (wage types) following a payroll run, via XI. Part of the message payload includes a data element 'Vendor Name' (e.g. Zurich Insurance). When the XI File Adapter creates the file, I want to create the files as /usr/file/xi/<Vendor Name>.csv
How to I pick up the 'Vendor Name' from the message payload and pass this into the "File Name:" field of the "File Access Parameters in the File Adapter communication channel configured?

hi,
The dynamic filename generation concept is as follows.
In your filename field. just give a variable with % symbols. (eg: %file% ).
Now, under the option Variable Name Substitution, you can give how the value has to be created.
It can be your interface name, sender service name, etc or it can be some value dynamically from your payload.
For the former, your give
message:interface_name ,etc
and for the payload part you give,
Payload: "your element root which u wanna acecss"
Just check this link out,
http://help.sap.com/saphelp_nw04/helpdata/en/bc/bb79d6061007419a081e58cbeaaf28/content.htm
And read the contents under variable substitution and it will help you understand the concepts better.
If you have any clarifications, do get back,
Regards,
Bhavesh

Receiver File Adapter - Create File on another SAP System

I am working on a project that includes this requirement: PDF files to be copied from a third party company via SFTP to a directory on our ECC system.
We have worked out the sender side config, and the transfer of the files into PI works fine via SFTP.
However, the PDF files are ending up in a directory on the PI system and not on our ECC system as expected.
The receiver communication channel is set up as follows:
Party = blank
Communication Component = communication component of the ECC business system
Adapter type = File
('Receiver' is ticked)
Transport Protocol = File System (NFS) (etc)
Target directory = /tmp (using this temporarily for testing)
I would have thought using the ECC business system would mean the files would end up on that system, but instead they end up on the /tmp directory on the PI system.
We are not permitted to use FTP between our SAP systems, so I can't go with that option.
I've searched for help on this and only see conflicting and vague statements about whether the NFS protocol can or can't be used for transfer to another SAP system in the landscape.
Any suggestions and help on the above, and the best method of transferring the files to the end SAP system would be very appreciated.
Regards,
Christine

remember that NFS means that it is referring to a file system on PI server.
What you could do is mount a space on SAP PI onto SAP ECC so that ECC will be able to access the files on SAP PI.
Guess that should solve the problem.

File-Adapter create Files with length 0

Hello Guys,
the XI get messages from the Backend via RFC and when the File-Adapter writes the Message sometimes with length 0
Can you help me

Hi Anton,
As Sudhir mentioned, there could be a problem of correct data. The best solution is :
Inside your RFC code just validate the code for empty values. e.g
IF NOT ITAB_RFC[] IS INITIAL.
**ITAB_RFC internal table data.
ENDIF.
and after validating this, if still you are getting some file with "0" length, then check File Content Conv in your CC.
Regards,
Sarvesh

File Adapter creates file with old record.

Hi,
I am working on Oracle Soa suite and trying to find out the the ways to Write file with the help of File Adaptor. But I find a problem with the file Adaptor that whenever I try to write updated rows to the file, it provides the earlier values in the rows and the new values are not written to the file.
Regards
Udit

Hi Anton,
As Sudhir mentioned, there could be a problem of correct data. The best solution is :
Inside your RFC code just validate the code for empty values. e.g
IF NOT ITAB_RFC[] IS INITIAL.
**ITAB_RFC internal table data.
ENDIF.
and after validating this, if still you are getting some file with "0" length, then check File Content Conv in your CC.
Regards,
Sarvesh

XI3.0 - file adapter create directory

Hi,
Is there anyway in 3.0 to prevent a receiver file adapter from creating a directory if it does not already exist. There was a parameter in the J2SE adapter but I do not know if or how this has been implemented in 3.0.
Regards
Ian

Ian,
SPS 17 introduces a new configuration setting for the receiver file adapter: "Create Target Directory" which does exactly what you want.
See http://help.sap.com/saphelp_nw04/helpdata/en/57/a21f407b402402e10000000a1550b0/frameset.htm
Regards,
Koen

File Adapter-Creating a temporary file

Hi,
I got an requirement to place only completed file(With 100% data) in the target directory. So i need to gather the data in a temporary file first before final file is put on the target directory. I know we have an option in the File adapter (Put File). What i need is, where the temporary file is created? do we need to delete these temporary file? and How to test this requirement?
Thanks in advance.
Regards
Sreeni

HI Sreeni
If you use Temporary file under put file XI wil create a temporary file at the target location only.
But when your requirement is to create file why you are looking for temperory file. Just use Create and it will create a final file.
write mode : directly
Use empty file handling as Ignore
Thanks
Gaurav

File Adapter: Dynamic file name

Hello,
I would like to use a filename like this:
Name.<DOCNUM>.Direction.<Timestamp>
For DOCNUM I use variable substitution. Works fine.
For <Timestamp> I need a different format as the timestamp function
in file adapter create. So I try to set up my timestamp in mapping like
dynamic file name:
DynamicConfigurationKey key1 = DynamicConfigurationKey.create("http://sap.com/xi/XI/System/File", "Timestamp");
conf.put(key1, a);
Input a is date function which creates my desired timestamp format. In file adapter I try this:
Name.%DOCNUM%.Direction.%Timestamp%
or
Name.%DOCNUM%.Direction.Timestamp
or
Timestamp
all doesn't work for Timestamp.
So is there a possibility to configure a dynamic filename like this???
Is there a possibility to access dynamic configuration variables in dynamic filename except
the known for filename and directory??
thanks
chris
Edited by: Christian Riekenberg on Mar 10, 2009 4:02 PM
Edited by: Christian Riekenberg on Mar 10, 2009 4:05 PM

your file name needs to be
Name.<DOCNUM>.Direction.<Timestamp>
dont use variable substitution. use only dynamic configuration and set the file name
introduce a logic that will create the string
Name.<DOCNUM>.Direction.<Timestamp>
eg. String filename = "Name" + var_docnum + "Direction" + var_timestamp;
then use the dynamic conf code to set the file name and use adapter specific properties in you adapter to retrieve it.
Ref:
/people/michal.krawczyk2/blog/2005/11/10/xi-the-same-filename-from-a-sender-to-a-receiver-file-adapter--sp14
http://help.sap.com/saphelp_nw04/helpdata/en/43/03612cdecc6e76e10000000a422035/frameset.htm

Error in Receiver File adapter using File content Conversion

Hi,
I am getting the following error in the receiver file adapter.
Conversion initialization failed: java.lang.Exception: java.lang.Exception: Error(s) in XML conversion parameters found: Parameter 'statement.fieldFixedLengths' or 'statement.fieldSeparator' is missing
I am using the below parameters for FCC:
Recordset Structure - statement
statement.endSeparator - 'nl'
statement.fieldSeparator - '0X09'
statement.fieldNames -xblnr,wrbtr,newbs,kostl,newko,prctr,xref1,rke_wwfud,rke_wwst3,blart,bukrs,bldate,budat,gjahr,monat,ctype,waers,bktxt,posnr,wbs_element,mwxkz,businessplace,businessplace,c_waers,c_wrbtr,g_ctype,g_waers,g_wrbtr,h_ctype,h_waers,h_wrbtr,trade_id,lob,sgtxt,zuonr,reason_rev,ldgrp,tcode,lifnr
ignoreRecordsetName - true
Please let me know where i am going wrong.
Thanks,
Aparna

Hi Aparna,
I feel the problem in your content conversion parameters is with
statement.fieldNames and ignoreRecordsetName
When you are confirguring receiver file adapter for file content conversion the above one is not required. Please refer below link for details on configuring content conversion in file adapter
[http://help.sap.com/saphelp_nw04/helpdata/en/bc/bb79d6061007419a081e58cbeaaf28/frameset.htm]
Hope this helps !!
Regards,
Amit

File Adapter or File Transport which one will give more performance

Hi all,
File Adapter or File Transport which one will give more performance ? in OSB?
Which one to select any one did performance analysis?
Thanks
Phani

Why don't you just go read some benchmarks?
http://www.barefeats.com/mbpp18.html

Sender File Adapter with file conversion

Hi guys,
Im using a Sender File adapter with file conversion. The message to be processed has a structure with fixed lengths and in your content are some values that needs to be ignored.
An example:
value1 value2 value3
I want to ignore value 2 but I cant find a parameter for that! Do I need to define dummy fields on my data type and ignore those fields during mapping? Or there is a specific parameter for that?
Thanks in advance,
Ricardo.

hi,
there always is another way:)
you can import the whole line to one field
and cut it inside the adapter module
(then you can define start and stop of the substring that you need to use)
but of course it's not standard even though it's quite easy to achieve in java
Regards,
michal
<a href="/people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions">XI / PI FAQ - Frequently Asked Questions</a>

Receiver file adapter creates empty files, Empty-Message Handling SP19

Hello,
We have just upgraded the system to SP19.
One of the new features is that it should be possible to determine how XI messages with an empty main payload are to be handled in the receiver file adapter.
If the parameter Empty-Message Handling is set to 'Ignore' no file should be created if the main payload is empty. In our case an empty file (size 0 kb) is still created even though the main payload is empty and the flag is set to 'Ignore'.
Has anybody experienced the same problem?
// Best regards Hans

This should work:
Use your own adapter module that parses incoming message and checks if it has any record sets in the document. If it does not have any record sets, then set the message to empty and then give this modified message to File receiver.
For example, see the example code below:
Module imports..
Audit log import..
DOM imports/SAX imports..
public ModuleData process(ModuleContext moduleContext, ModuleData inputModuleData) throws ModuleException {
          try {
               // get the XI message from the environment
               Message msg = (Message) inputModuleData.getPrincipalData();
               AuditMessageKey amk = new AuditMessageKey(msg.getMessageId(),AuditDirection.INBOUND);
               Audit.addAuditLogEntry(amk, AuditLogStatus.SUCCESS,"RemoveRootTag: Module called");
               XMLPayload payLoad = msg.getDocument();
               Document doc = parseXmlFile(payLoad.getInputStream());
               if(doc != null){
                    if(!doc.getDocumentElement().hasChildNodes()){
                         Audit.addAuditLogEntry(amk, AuditLogStatus.SUCCESS, "Document is empty!!");
                         payLoad.setContent("".getBytes());
                         msg.setDocument(payLoad);
               // provide the XI message for returning
               inputModuleData.setPrincipalData(msg);
               } catch (Exception e) {
               // raise exception, when an error occurred
               ModuleException me = new ModuleException(e);
               throw me;
               // return XI message
          return inputModuleData;
     private Document parseXmlFile(InputStream xmlpayload) {
          try {
               DocumentBuilderFactory factory = DocumentBuilderFactory.newInstance();
               factory.setValidating(false);
               //        Create the builder and parse the file
               Document doc = factory.newDocumentBuilder().parse(xmlpayload);
               return doc;
          } catch (SAXException e) {
          } catch (ParserConfigurationException e) {
          } catch(IOException e){
          return null;

Text Content Conversion - File Adapter - Creates empty file

I am running XI 7.0.
Mapping from abap proxy to file - text content conversion.
The process works, generates and sends file from mySAP, maps through XI, logs onto ftp site and creates file, but doesn't write any data into the file!
I am really confused as to what is happening!
This is taken from the communication channel!
Audit Log for Message: 5ccc2e46-c0f2-5349-e100-00000ddf240f
Time Stamp Status Description
2007-04-28 10:37:21 Success Message successfully received by messaging system. Profile: XI URL: http://host.fqdn:55000/MessagingSystem/receive/AFW/XI Credential (User): XIISUSER
2007-04-28 10:37:21 Success Using connection File_http://sap.com/xi/XI/System. Trying to put the message into the receive queue.
2007-04-28 10:37:21 Success Message successfully put into the queue.
2007-04-28 10:37:21 Success The message was successfully retrieved from the receive queue.
2007-04-28 10:37:21 Success The message status set to DLNG.
2007-04-28 10:37:21 Success Delivering to channel: EPIW_FTP_Receiver_EmployeeRecords
2007-04-28 10:37:21 Success File adapter receiver: processing started; QoS required: ExactlyOnce
2007-04-28 10:37:21 Success File adapter receiver channel EPIW_FTP_Receiver_EmployeeRecords: start processing: party " ", service "XE_DEV_3RD_EPIW_001"
2007-04-28 10:37:21 Success Connect to FTP server "ftp.ftp.ftp.ftp", directory "/ECS/Target"
2007-04-28 10:37:21 Success Write to FTP server "ftp.ftp.ftp.ftp", directory "/ECS/Target", file "epiw_output.dat"
2007-04-28 10:37:21 Success Transfer: "BIN" mode, size 125 bytes, character encoding -
2007-04-28 10:37:21 Success Start converting XML document content to plain text
2007-04-28 10:37:21 Success File processing complete
2007-04-28 10:37:21 Success The message was successfully delivered to the application using connection File_http://sap.com/xi/XI/System.
2007-04-28 10:37:21 Success The message status set to DLVD.
I can see the data before and after... Any ideas?

hi,
this is starange:)
did you refresh FTP (F5) ?
maybe you're checking wrong ftp server? with the same folders ?
ups - I thought I doens't create any file...
as suggested check your mapping as per my blog:
/people/michal.krawczyk2/blog/2005/09/16/xi-how-to-test-your-mapping-in-real-life-scenarios
just use TCODe for abap mapping tests - SXI_MAPPING_TEST
Regards,
michal
<a href="/people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions">XI / PI FAQ - Frequently Asked Questions</a>

File Adapter Linux File Permissions

Hi,
When we use the File Adapter from BPEL process to write a create a file, it creates with permission 403.
We need to create the file with permission 775.
Which is the best way to do that?
Thank You.
JP

Hi. I don't think you can do this on an adapter-base. As far as I know there are no properties you can set in file adapter wsdl. I see three possibilities (but I've never used them myself).
First possibility is to set default permission for user who runs adapter (usually this is oracle under which Oracle Software is installed). This can be done by using command umask. Below is some more information on this topic.
The most common umask setting is 022. The /etc/profile script is where the umask command is usually set for all users.
Second possibility is to create file with 0 byte by writing custom java and then invoke adapter with append option. For a complete list op properties on file adapter see Chapter Oracle JCA Adapter Properties in Oracle Fusion Middleware User Guide for Technology Adapters.
Third possibility is by writing your own file adapter. By that you have full cntrol on behavior but it will be time-consuming.
Hope it helps.
Regards, Jos.

Receiver file adapter creates an innecesarry extra line

Hi,
I have an issue with an extra line that add the receiver file adapter with the content conversion.
The file XML that the file adapter has to convert, is the next;
<root>
<cofig>
<FileName>NameOfTheFile.txt</FileName>
</cofig>
<lines>
<line>
<data>BBBBBBBBBBBBBBBBBBBBBB</data>
<data>Aaaaaaaaaaaaaaaaaaaaaa</data>
</lines>
</root>
Because FileName is not necessary, I remove it with:
cofig.fieldFixedLengths 0
cofig.fixedLengthTooShortHandling CUT
but it leaves an empty line that i don't want. that is, the text in the file start in the second line.
Any help?
Thank you in advance.

Can you do a small change in your mesg. structure ?
change it to....
<root>
<lines>
<line>
<data>BBBBBBBBBBBBBBBBBBBBBB</data>
<data>Aaaaaaaaaaaaaaaaaaaaaa</data>
</lines>
<cofig>
<FileName>NameOfTheFile.txt</FileName>
</cofig>
</root>
and then use
cofig.fieldFixedLengths 0
cofig.fixedLengthTooShortHandling CUT
followed by
endSeparator 0
Ref: Suppressing Field In Receiver File Adapter for more details.

File adapter created file permissions at OS

Similar Messages

Maybe you are looking for