File authentication problem in OWSM

Hi all,
I want to create file authentication in owsm for that i created .htpasswd file in that i have given username:password. But when i am running the following command in the command prompt it's giving the problem.
Oracle_home\owsm\bin>wsmadmin md5encode username password .htpasswderror message : Target .htpasswd does not exist in this project.
pls anybody can help on this.
thanks
kmr

Hi mani,
You are giving a wrong commands. The command should be:
Oracle_home\owsm\bin>wsmadmin md5encode .htpasswd username
then it will ask for the password, give the password, then it will finish encoding.
Bye...
Chandra.

Similar Messages

Problems with the Password File Authentication

Hi,
I try to implement the Password File Authentication in my PC (Window XP). I did :
a) orapwd file:=C:\oracle\ora92\dbs\orapw.pwd password=sys2003 entries=5
b) I set the REMOTE_LOGIN_PASSWORDFILE to EXCLUSIVE
c) I created a user "willer" (With SYSTEM login)
d) I tried to give the sysdba privilege to the user willer :
SQL> grant sysdba to willer;
grant sysdba to willer
ERROR at line 1:
ORA-01031: insufficient privileges
e) I tried to connect like a sysdba with the user SYS end password sys2003 but :
SQL> connect sys as sysdba;
Enter password: *******
ERROR:
ORA-12560: TNS:protocol adapter error
Warning: You are no longer connected to ORACLE.
SQL>
How can I do to login with the SYS login to give the sysdba privilege to my user willer ? And why I can't log into my database with the SYS login ?
Thank you for your response because I am very lost....
Eric Willer

Hi,
Thank you for your response...
I deleted all my databases in my PC and reconstructed just one (certific), after that I followed your instruction and now I can connect into the database with the sys as sysdba login. But I just have one stangeness : I created a user willer and gave to him the sysdba privilege, when i log into the database with this user I can log on like a sysdba with wich ever user I want, even if the user doesn't exist.
Exemple :
Personal Oracle9i Release 9.2.0.1.0 - Production
With the Partitioning, OLAP and Oracle Data Mining options
JServer Release 9.2.0.1.0 - Production
Welcome to SQL*Plus!
You are connected to CERTIFIC.ORACLE.DATABASE as WILLER
SQL> connect nicole as sysdba;
Enter password:
Connected.
SQL>
I don't need to improve a password and I have never created the user nicole.
I don't understand.... What's wrong ?
I try with another user, I just created a serge user with just the create session privilege. I can log on with this user like a sysdba :
Welcome to SQL*Plus!
You are connected to CERTIFIC.ORACLE.DATABASE as SERGE
SQL> connect serge as sysdba
Enter password:
Connected.
SQL>
Thank you for your response...
Eric Willer

Authentication problem - solved, but maybe a bug in Mac OS X?

Hi,
I've a rather small installation with only a handful of users configured on a Mac mini (Mac OS X Server, 10.6.8). All of them use the mail, calendar and addressbook server on the Mac, nothing more. They use it with Mac, iPhone and iPad. Everything worked fine for months but suddenly all of them were faced authentication problems: it was not possible to login on the imap server, the calendar server, the addressbook server. It was possible to login using the admin account on the server directly. Moreover, all users disappeared from the workgroup manager, however they still were available on the servers LDAP server and findable using ldapsearch.
First, I used to completely restart the server to solve the problem, but it reappeared after only few hours again.
Second, after understanding more about the authentication process, I found the "killall DirectoryService" was sufficient to solve the problem, but it still reappeared after few hours.
Then I found the, once the problem occured, there was nearly no more communication to the local LDAP server on port 389 on localhost. When everything was working fine, the was a lot of such communication, including queries for usernames, when a login attempt was made. I started a "tcpdump -n -i lo0 port 389" and waited for the problem again. After the problem occured, I found in the pcap files that there were a few final query attempts, actually attempts the open a port 389 TCP connection to the slapd running on localhost, which were answered with a TCP RST. Then, no more attempts were made until l restarted the DirectoryService. Using the logfile of the slapd I found that this happened exactly at the time the slapd was stopped and restarted. And - surprisingly for me - stopping and restarting the slapd happened exactly once an hour.
I then found that it happened exactly at the time the time machine backup process was started and indeed it was possible to trigger the event of restarting the slapd by manually starting a time machine backup.
(Indeed, I switched my backup strategy from SuperDuper to time machine the other day and maybe that was the time the problem occured for the first time. I know that time machine is not considered as the best backup strategy for a server but I wanted to try on my own.)
Google helped my to find a hint that time machine will actually stop and restart slapd - which is a generally a good idea, since otherwise a backup from some open database files would be made, which could work but may fail. So, I thing, someone of the developers thought about that problem too and has considered time machine for backups of a server.
However, a not running slapd can not answer queries from a DirectoryService and a stopping or starting process might indeed end up with TCP SYNs answered with TCP RST.
My solution was to disable time machine again and from that time the problem does not occur again.
I'm wondering why the DirectoryService process isn't starting to query the slapd again after a failed connection. Isn't this a bug? After this experience I consider time machine as not only the not preferred backup solution for a server but as completely incompatible with Mac OS X server - although, as I said, it seems that someone thought about backing up the LDAP database using time machine.
(On a Lion server this problem does not occur, the slapd will not be stopped and restarted when time machine is running. Moreover, I saw a com.apple.slapd.start notification in the slapd.log ... maybe this tells DirectoryService to try again.)
Cheers,
Wolfgang

Another problem I found with the MacOS X key bindings: the 6 key doesn't work!
In the config that ships with SQL Developer, I found this:
<Item class="oracle.javatools.util.Pair">
<first class="java.lang.String">DOCUMENT_6_CMD_ID</first>
<second class="oracle.ide.keyboard.KeyStrokes">
<data>
<Item class="javax.swing.KeyStroke">6</Item>
</data>
</second>
</Item>
which should be:
<Item class="oracle.javatools.util.Pair">
<first class="java.lang.String">DOCUMENT_6_CMD_ID</first>
<second class="oracle.ide.keyboard.KeyStrokes">
<data>
<Item class="javax.swing.KeyStroke">meta 6</Item>
</data>
</second>
</Item>

Connecting to remote database (idle) with Password File Authentication

Hi all,
I was wondering if it's possible to connect to a remote database that is shut down (idle instance) as sys user with sysdba privileges? In the book Oracle - All in One on page 210 in the section - Operating System and Password File Authentication it says:
Connection with operating system or password file authentication is always possible, no matter what state the instance and database are in, and is necessary to issue STARTUP or SHUTDOWN commands.
Above indicates that it's possible but I'm unable to do so.
I managed to connect to remote database that was in nomount mode (see below for details).
When I first tried to connect to a remote database (idle instance) using password file authentication it was giving following error:
sqlplus sys@ORCL as sysdbaSQL*Plus: Release 11.2.0.3.0 Production on Fri Dec 21 13:59:28 2012
Copyright (c) 1982, 2011, Oracle. All rights reserved.
Enter password:
ERROR:
ORA-12514: TNS:listener does not currently know of service requested in connect
descriptor
Enter user-name:
After starting the database to nomount mode I was getting following error:
sqlplus sys@ORCL as sysdbaSQL*Plus: Release 11.2.0.3.0 Production on Fri Dec 21 13:48:36 2012
Copyright (c) 1982, 2011, Oracle. All rights reserved.
Enter password:
ERROR:
ORA-12528: TNS:listener: all appropriate instances are blocking new connections
Enter user-name:
So I added the clause (UR=A) to my listener.ora file and after that it work and I was able to connect:
sqlplus sys@ORCL as sysdbaSQL*Plus: Release 11.2.0.3.0 Production on Fri Dec 21 14:04:49 2012
Copyright (c) 1982, 2011, Oracle. All rights reserved.
Enter password:
Connected to:
Oracle Database 11g Enterprise Edition Release 11.2.0.2.0 - Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
SQL>
I have all necessairly entries in tnsnames.ora on my local host.
Also I have no problems when connecting as sys user with sysdba when the DB is open but can't get it work on an idle instance.
I know that I can use operating system authentication but want to know if there is a mistake in the book or I'm doing something wrong.
Regards,
Dawid
Edited by: 978239 on 2012-12-21 06:24

978239 wrote:
Hi all,
I was wondering if it's possible to connect to a remote database that is shut down (idle instance) as sys user with sysdba privileges? In the book Oracle - All in One on page 210 in the section - Operating System and Password File Authentication it says:
Connection with operating system or password file authentication is always possible, no matter what state the instance and database are in, and is necessary to issue STARTUP or SHUTDOWN commands.
Above indicates that it's possible but I'm unable to do so.
I managed to connect to remote database that was in nomount mode (see below for details).
When I first tried to connect to a remote database (idle instance) using password file authentication it was giving following error:
sqlplus sys@ORCL as sysdbaSQL*Plus: Release 11.2.0.3.0 Production on Fri Dec 21 13:59:28 2012
Copyright (c) 1982, 2011, Oracle. All rights reserved.
Enter password:
ERROR:
ORA-12514: TNS:listener does not currently know of service requested in connect
descriptorSince the database is down, the only way the listener is going to know of it is if you create a static registration by adding an entry for the db in the SID_LIST section of listener.ora
>
Enter user-name:
After starting the database to nomount mode I was getting following error:
sqlplus sys@ORCL as sysdbaSQL*Plus: Release 11.2.0.3.0 Production on Fri Dec 21 13:48:36 2012
Copyright (c) 1982, 2011, Oracle. All rights reserved.
Enter password:
ERROR:
ORA-12528: TNS:listener: all appropriate instances are blocking new connections
Enter user-name:
So I added the clause (UR=A) to my listener.ora file and after that it work and I was able to connect:
sqlplus sys@ORCL as sysdbaSQL*Plus: Release 11.2.0.3.0 Production on Fri Dec 21 14:04:49 2012
Copyright (c) 1982, 2011, Oracle. All rights reserved.
Enter password:
Connected to:
Oracle Database 11g Enterprise Edition Release 11.2.0.2.0 - Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
SQL>
I have all necessairly entries in tnsnames.ora on my local host.
Also I have no problems when connecting as sys user with sysdba when the DB is open but can't get it work on an idle instance.
I know that I can use operating system authentication but want to know if there is a mistake in the book or I'm doing something wrong.
Regards,
Dawid
Edited by: 978239 on 2012-12-21 06:24

Screensharing authentication problem and weird solution

OK, I've been having the Screensharing authentication problem that crops up regularly on this forum. Accidentally I found a very weird solution. I want to know what's going on and to let others know of the solution.
Let's say my laptop account is called 'london' and I want to connect it to my tower account called 'paris' on the LAN. I browsed the network for the tower, click 'connect as' and in the dialog box I put in "Name: paris" and "Password: xxx". I click 'connect' and I am connected as the registered user 'paris' and I can browse all of the disks. File sharing is thus working normally.
Now I click the 'share screen...' button and I get another dialog box into which I once more type "Name: paris" and "Password: xxx". This yields an authentication failure message, which many users will be familiar with.
By accident instead of typing the name and password for the account on the distant machine, I typed into the dialog box the name and password of the local machine: ie. "Name: london" and "Password: yyy". Much to my amazement the screensharing works. What is going on?

No, the username on london is london and on the machine paris it is paris. However, the passwords are different.
Just to be clear, I first connect to the remote machine's file sharing using the remote machine's username and password (ie. in the normal fashion). I then connect screensharing but give the local machine's username and password in the dialog box.
Before I made this discovery I had created a couple of fresh accounts on the remote machine. One was glitched, while the other functioned properly (ie. screensharing required the remote machine's username and password). The bizarre fix worked for my original account. I have not tested it on the new accounts for fear of screwing things up again.

Help with add file name problem with Photoshop CS4

Frustrating problem: Help with add file name problem with Photoshop CS4. What happens is this. When I am in PS CS4 or CS3 and run the following script it runs fine. When I am in Bridge and go to tools/photoshop/batch and run the same script it runs until it wants interaction with preference.rulerunits. How do I get it to quit doing this so I can run in batch mode? Any help is appreciated. HLower
Script follows:
// this script is another variation of the script addTimeStamp.js that is installed with PS7
//Check if a document is open
if ( documents.length > 0 )
var originalRulerUnits = preferences.rulerUnits;
preferences.rulerUnits = Units.INCHES;
try
var docRef = activeDocument;
// Create a text layer at the front
var myLayerRef = docRef.artLayers.add();
myLayerRef.kind = LayerKind.TEXT;
myLayerRef.name = "Filename";
var myTextRef = myLayerRef.textItem;
//Set your parameters below this line
//If you wish to show the file extension, change the n to y in the line below, if not use n.
var ShowExtension = "n";
// Insert any text to appear before the filename, such as your name and copyright info between the quotes.
//If you do not want extra text, delete between the quotes (but leave the quotes in).
var TextBefore = "Lower© ";
// Insert any text to appear after the filename between the quotes.
//If you do not want extra text, delete between the quotes (but leave the quotes in).
var TextAfter = " ";
// Set font size in Points
myTextRef.size = 10;
//Set font - use GetFontName.jsx to get exact name
myTextRef.font = "Arial";
//Set text colour in RGB values
var newColor = new SolidColor();
newColor.rgb.red = 0;
newColor.rgb.green = 0;
newColor.rgb.blue = 0;
myTextRef.color = newColor;
// Set the position of the text - percentages from left first, then from top.
myTextRef.position = new Array( 10, 99);
// Set the Blend Mode of the Text Layer. The name must be in CAPITALS - ie change NORMAL to DIFFERENCE.
myLayerRef.blendMode = BlendMode.NORMAL;
// select opacity in percentage
myLayerRef.opacity = 100;
// The following code strips the extension and writes tha text layer. fname = file name only
di=(docRef.name).indexOf(".");
fname = (docRef.name).substr(0, di);
//use extension if set
if ( ShowExtension == "y" )
fname = docRef.name
myTextRef.contents = TextBefore + " " + fname + " " + TextAfter;
catch( e )
// An error occurred. Restore ruler units, then propagate the error back
// to the user
preferences.rulerUnits = originalRulerUnits;
throw e;
// Everything went Ok. Restore ruler units
preferences.rulerUnits = originalRulerUnits;
else
alert( "You must have a document open to add the filename!" );

you might want to try the scripting forum howard:
http://www.adobeforums.com/webx?13@@.ef7f2cb

SQLNET authentication problem!

Hi,
We have a setup in which the database server is running on a 'XXX' domain and all the clients are running in domain 'YYY'.
On the client, if following is the setup, then the clients face ORA-03113 after around 45 to 90 minutes of idle time.
SQLNET.ORA
NAMES.DEFAULT_DOMAIN=YYY
TNSNames.ORA
DBName.YYY = (..........
Note: This is not happening with all the clients in 'YYY' domain.
Now, we thought this was a domain authentication problem and removed the DEFAULT_DOMAIN setup from the client. Still the client faces ORA-03113.
As a part of trial, we moved one of the machines which was facing the problem to the domain of the database server and the error is gone.
But, due to obvious reasons, it is not possible to move all the clients to the domain of database server.
Is there any way to get around this problem?
Why is it that only some of the clients are facing this problem?
Why is it that the error occurs only after idle time and not during work?
Do we need to set NAMES.DEFAULT_DOMAIN=XXX at client? (I apologize for this question but I am really confused with the matters now)
Addition info: The database server is Oracle 10.1.0.2.0 and clients are ranging from Oracle 8.1.6 to Oracle 10.1.0. And the errors occur on clients with any version of Oracle.
Please help us out in this regard.
Thanks in advance,
Satish

I have gone thorugh the Action suggested for this oracle error.
If problematic machine is shifted to the domain XXX, error is gone,Do you shift physically to some other network?? if yes then there might be a problem with your network. The machines which are disconnected, might be on the same network channel or switch which is creating some problem in your network. this is only luck that your failure occur when there is no activity from that client which is disconnected.
Shift the places of problem facing client and non-problem facing client with each other and then check. It will clear the mind about the netrowk problem
Regards

Webservice authentication problem

Web Service Authentication problem
Posted: Jun 17, 2005 3:32 PM Reply E-mail this post
Hi
I have created a portal service and exposed this service as a webservice. I am consuming this webservice in webdynpro. Portal service contains 2 simple methods putdata() and getdatat().
When i access the webservice i am getting the following error.
"javax.xml.rpc.soap.SOAPFaultException: The User Authentification is not correct to access to the Portal Service com.sap.portal.prt.soap.GlobalData or the service was not found"
My Enterprise portal server is configured for SSO to back end R/3 system. I have checked for portal service availability and it is fine.
My Webdynpro and Portal are running on different machines. EP is running on AIX with SP11.
Any help please.
Regards
NagaKishore V

Hi Shahab,
Can you reproduce the issue if you create 2 applications. One that exposes a secured web service and the other one the one, consumes the web service? This would help to isolate the issue and move forward in case is a bug.
Thanks,
Juan Camilo

SOMEONE PLEASE HELP WITH MISSING FILES XP PROBLEM

i recently purchased an ipod touch, and all i want to do is get some music on it, and update the firmware, but i cant use itunes, cuz im getting 'there are some files missing' problem.
I swear to god, if i dont get this fixed by the end of the week, im gonna post the latest video on youtube... on how to smash up apple products.
Ive been trying NOT to buy apple products since the first dawn of time, but i do actually like the ipod touch. But, low and behold... the very reason why i never buy apple products has been confirmed!
can someone PLEASE tell me if there is a solid fix for this? i have literally tried EVERYTHING before you ask. im at my wits end.
Using XP home, all updates installed... latest itunes,

It will probably help if you'll post the exact error message and when it's occurring. Otherwise we'll just be guessing, not that someone here might not have a good guess. I'm going to guess that this thread might help:
http://discussions.apple.com/thread.jspa?messageID=11161893&#11161893
Regards.

File sharing problems and horror story (nearly)

I use Leopard on a MacBook Pro, a MacBook and a iMac G4 800 MHz (unsupported model).
I have on the iMac and the MacBook Pro many users (the same ont he two machines) and I always use Fast User Switching.
I have had very few problems with Leopard until now; I like it even if there are some glitches or some new features which are not my cup of tea (hierarchical menus missing from the dock, stacks useless when there are many items, FireWall impossibilities (?) to open specific ports, Back to my Mac working on a Lan but not from outside until now, problems with a few apps (Parallels networking erratic), ...
Now about File Sharing.
Let say my main account is user1 (Administrator), and I have another user2 also administrator, plus user3, user4 standard users.
On the iMac I activate File Sharing.
On the MacBookPro, as user1, if I connect to the iMac Server (using afp://IPaddress_of_theiMac/) I do NOT get the dialog
"Enter your user name and password to access file server YYY
Connect to server as Guest or as Registered User"
but I directly get the dialog
"Select the volumes you want to mount on YYY"
From this, if I select user1 it mounts with full read/write permissions which is normal. It appears that I am connected with my Apple account user1&mac.com (same as mentionned in the Account panel of System Preferences).
On the other hand, if I try to connect to the user2 account, I only get limited access although in the File Sharing Preferences, user1/iMac is mentionned with full Read/Write preferences for the Home Folder of user2.
What is very surprising is that if I log on the MacBook Pro as user2, or user 3 or user4, then connect to the iMac, I first get the dialog to enter a user name and a password. This gives me access with the correct full permissions on user1/iMac or user2/iMac using the corresponding user name/password pair; this is the usual behaviour which is missing when trying to connect from user1/MacBook Pro.
Now for the Horror Story!
Trying to understand what was going on with the permissions of the user2/iMac account, I logged in to the iMac as user1, went to the Users folder and from there had a look on the informations about user2 home folder. In the lower part of the pannel, Sharing & Permissions says "You have no access" (which is normal) and this is followed by a table where users and permissions are listed. It seems user1 has Read and Write access in contradiction with the preceding phrase...
Anyway, I tried to modify these authorizations for user2 by clicking on the lock of the Information pannel and entering name and password of the administrator. Didn't go farther than that. By mistake, I hit Command-Delete and user2 was GONE from the list AND NOT ONLY from the list in the Information window! Using Fast User Switching and going to user2, nothing left on the Desktop and NO Home anymore.
In the System Preferences/Accounts panel, user2 was still mentionned.
In the Users folder, no user2 folder anymore.
Using once again Fast User Switching, I logged as user2 and got by magic an all new Home. Nothing left in Documents, Library or other user1 folders. Standard settings for icons, dock, etc.
My first move has been to use a very recent backup to restore everything (Thank you Mike Bombich from Copy Cloner!).
Once everything was back to normal, I had a look at the Trash from user1 and guess what, the Home folder of user2 was there, complete.
So now I am left with two questions
why is it I do not have the same dialogs when connecting from all the accounts although as far as I can see, configurations are the same?
why is it possible, from an Information pannel to delete the account of another user?
Thank you all for comments!

For the file sharing problems, answer is found in
http://docs.info.apple.com/article.html?artnum=306723

File path problem

I have looked an read through almost all the file path problem post possible and I am still having issues maybe one of you guys can help me, here are my files
I am doing this as an example so that I can apply it to all of my file problems....
Harold Timmis
[email protected]
Orlando,Fl
*Kudos always welcome
Attachments:
pathexample.zip ‏122 KB

First of all, to troubleshoot the problem it would help to put some filepath indicators at each point so that you can see what is going on. Also, in your exe having an error dialog "Simple Error Handler.vi" to let you know what LabVIEW didn't like in the exe.
Now, when you run a top level ("Main.vi") and use the "Current VI's Path " in the development mode it returns <Filepath>\"Current path"\Main.vi. So stripping once will get you to <Filepath>\"Current path" . Now if you make it into an exe the "Current VI's Path" returns <Filepath>\"Current path"\"Name.exe"\Main.vi so you are "nested" one deeper.
I use the following construct to determine whether the vi is being used as in the development environment or as an exe, the parse the path accordingly, although in this instance it is used to supply different directory names to a little more complex file system.
Putnam
Certified LabVIEW Developer
Senior Test Engineer
Currently using LV 6.1-LabVIEW 2012, RT8.5
LabVIEW Champion

Error when opening itunes : iTunes has stopped working ''A problem caused the program to stop working correctly''. When I repaired damaged files the problem still exists and also after uninstalling and redownloading and installing itunes. I have windows 8

Error when opening iTunes : iTunes has stopped working '' A problem caused the program to stop working correctly''.
When I repaired damaged files the problem still exists and also after uninstalling, redownloading and reinstalling iTunes.
My pc is working with windos 8.
Is there a solution?

Hey there Rodney274,
It sounds like you are getting an error from iTunes when you launch it. I would try the troubleshooting in this article named:
iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues
http://support.apple.com/kb/ts1717
Start with troubleshooting for 3rd party plug ins section, then the rest of the article if needed:
Start iTunes in Safe Mode
Open iTunes in Safe Mode to isolate any interference from plug-ins or scripts not manufactured by Apple.
Hold down Shift–Control while opening iTunes. You should see a dialog that says "iTunes is running in safe mode" before iTunes finishes starting up.
Click Continue.
See if the issue you're experiencing persists in Safe Mode.
If you have the same issue while iTunes is in Safe Mode, proceed to the "Create a new user account" section. If you don't experience the same issue, follow these steps to remove third-party plug-ins.
Thank you for using Apple Support Communities.
Take care,
Sterling

File Info problems in Photoshop CC & CS5.1 on OS X 10.8

I have recently upgraded my Macs, running OS X Mountain Lion, from Photoshop CS5.1 to Photoshop CC for two reasons:
1. Because it most the most cost efficeint way to obtain the latest Camera Raw plugins that are no longer supported in CS5.1
2. Because I began experiencing issues on two Macs where initially only in Bridge, was I no longer able to input any File Info dialogue.
I make extensive use of File Info templates, which are then applied to batches of files in Bridge before individual files, or groups of files requiring the identical metadata are modified.
After a time, once the overall batch of File Info templates had been applied to files I discovered that I was unable to edit them further. Even after Repairing Permissions in Disk Utility it usually took a reboot to fix the problem, although the problem was always solved.
However there came a point a few weeks ago when I was unable write any further metadata to File Info, in Bridge or Photoshop, no matter what I did. Again this issue happened on two Macs so I'm guessing that it is not a machine issue.
As I needed the latest Camera RAW plugins as well I decided to upgrade to Photoshop CC, which I have to say I have been very pleased with - until now. The dreaded File Info problem has now occurred again, although currently only in Photoshop, not Bridge. When I try to add or modify any information in File Info in Photoshop CC the dialogue box just closes!
Clearly it is not just a Photoshop CC issue although I never had the problem prior to CS5.1 and I leapfrogged CS6 and I find it hard to believe that it is a machine issue. Could it be a conflict with the OS or with Extensis Suitcase Fusion 4?
Has anyone else encountered this problem?

Curt, Thanks for your rapid response.
To answer your questions. I thought that, initially, the problem might be a permissions problem but it occurs on both boot drives and also when the same files are copied to Firewire external drives - on both Macs, but different external drives in each case. I followed your link but there was nothing there that I didn't already know or hadn't already tried, thanks.
One computer is a 24" iMac and the other is a 15" MacBook Pro. I've also tried to replicate the problem on four PowerMac G5s running OS X 10.5.8 with Photoshop/Bridge CS4, with the same drives plugged in, but have experienced no problems at all. It's quite bizarre.
Also, looking deeper into the conundrum, I find that I can't input any numbers, only letters! Using the keyboard all numbers, whether on the main or auxiliary keypads, cause the File Info dialogue box to either jump to a new tab or close. Using Shift on the numbered keys works perfectly however!
It just goes on getting better...

File transfer problem

I have a 2009 intel iMAC running 10.6.8. Several months ago it developed a file transfer problem. When transferring files to an external server via ethernet cable, most of the time it will only let me transfer one file at a time whether is a small word document or a large video file that is several gigabytes. Even with transferring just one file, the elapsed time bar will not indicate the file has completely transferred. It stays open and appears as if it is still trying to transfer even though the file size transferred is equal to the size of the file. Plus the only way I can close the the transfer bar is to relaunch finder. Then when I go to the folder it was transferring it to, the entire file will be there.
Suggestions?

Have you tried restarting the external drive and the computer?

10.8 Server file sharing problem

We have a new Mac mini with 10.8 and OS X Server app. The mini has direct attached storage and will be used mainly for File Sharing. There is a repeatable problem/bug with case sensitive folder names and file sharing. For example a folder named "Editorial" is inacessible via "Connect to Server" from a client on the LAN. The same folder with the same permissions, same everthing, except it is named "editorial" works perfectly. Change the uppercase E to a lowercase e and it works. The drive is formatted with normal HFS+. It is Not HFS+ case-sensitive. I have Xserves running 10.4, 10.5, and 10.6 for file sharing and none have this problem.
Has anyone else experieced this? Is there a fix? Other than making everything lowercase.

Simon Slavin United Kingdom
If you have a problem please start a thread of your own. Don't get us confused between solving two different problems.
Simon,
The subject of this thread is dealing with:
"Server 10.8 file sharing problem"
Specifically for direct attached storage file sharing permissions issue.
Client computers having issues with folder permissions
These are exactly my issues as well. I was hoping to try a solution here or maybe proffer a solution if found elsewhere. I did not realize each problem should be opened as a separate discussion....
Sulking back into the shadow...

File authentication problem in OWSM

Similar Messages

Maybe you are looking for