File content convertion for multi mapping occurance 1:N

Hi ALL,
In my scenario i have used multimapping means 1:N,
In my scenario the sender is file adapter and receiver is JMS adapter.
My requirement is that i have to pick the file from respective directory path...
through file content convertion
For example below is the structure when the sender file adpater pickes the flat file..through File content convertion....
<?xml version="1.0" encoding="utf-8"?>
<ns:mt_BookingConfirmation xmlns:ns1="urn:agrp:ml">
     <Recordset>
         <BOOKING_REQCON_ROU>
           <RECORD_TYPE>ROU</RECORD_TYPE>
           <SENDER_ID>AS.MAN</SENDER_ID>
           <RECEIVER_ID>abcd.99018293</RECEIVER_ID>
        </BOOKING_REQCON_ROU>
     </Recordset>
</ns:mt_BookingConfirmation>
But the structure of the source which i have in the mpping is as below,you can see the diffrence and this diffrence we will get automatically when we change the occurances of the target structure.
<?xml version="1.0" encoding="UTF-8"?>
<ns0:Messages xmlns:ns0="http://sap.com/xi/XI/SplitAndMerge">
   <ns0:Message1>
      <ns1:mt_BookingConfirmation xmlns:ns1="urn:agrp:ml">
        <Recordset>
         <BOOKING_REQCON_ROU>
           <RECORD_TYPE>ROU</RECORD_TYPE>
           <SENDER_ID>AS.MAN</SENDER_ID>
           <RECEIVER_ID>abcd.99018293</RECEIVER_ID>
        </BOOKING_REQCON_ROU>
     </Recordset>
      </ns1:mt_BookingConfirmation>
   </ns0:Message1>
</ns0:Messages>
because of this diffrence in the structure... the picked file could not able to pass ttrough from the message mapping.Because of this error is throwned in the SXMB_MONI
Please if some one know how to do the file content convertion for this type of diffrent structure.
Please let me know ASAP.
Thanks in advance...
Best Regards,
Aravind.Pujari

Hi,
Check Below links.
File content conversion sites
/people/venkat.donela/blog/2005/03/02/introduction-to-simplefile-xi-filescenario-and-complete-walk-through-for-starterspart1
/people/venkat.donela/blog/2005/03/03/introduction-to-simple-file-xi-filescenario-and-complete-walk-through-for-starterspart2
/people/arpit.seth/blog/2005/06/02/file-receiver-with-content-conversion
/people/anish.abraham2/blog/2005/06/08/content-conversion-patternrandom-content-in-input-file
/people/shabarish.vijayakumar/blog/2005/08/17/nab-the-tab-file-adapter
/people/venkat.donela/blog/2005/03/02/introduction-to-simplefile-xi-filescenario-and-complete-walk-through-for-starterspart1
/people/venkat.donela/blog/2005/03/03/introduction-to-simple-file-xi-filescenario-and-complete-walk-through-for-starterspart2
/people/venkat.donela/blog/2005/06/08/how-to-send-a-flat-file-with-various-field-lengths-and-variable-substructures-to-xi-30
/people/anish.abraham2/blog/2005/06/08/content-conversion-patternrandom-content-in-input-file
/people/shabarish.vijayakumar/blog/2005/08/17/nab-the-tab-file-adapter
/people/jeyakumar.muthu2/blog/2005/11/29/file-content-conversion-for-unequal-number-of-columns
/people/shabarish.vijayakumar/blog/2006/02/27/content-conversion-the-key-field-problem
/people/michal.krawczyk2/blog/2004/12/15/how-to-send-a-flat-file-with-fixed-lengths-to-xi-30-using-a-central-file-adapter
/people/arpit.seth/blog/2005/06/02/file-receiver-with-content-conversion
http://help.sap.com/saphelp_nw04/helpdata/en/d2/bab440c97f3716e10000000a155106/content.htm
Regards,
Phani
Reward Points if Helpful

Similar Messages

Receiver File content conversion for multi level hireachy

Receiver channel file content conversion..
this is SAP proxy to FIle Scenario, which will get invoice details from SAP along with multiple invoice texts for each invoice.
I would like to have below mentioned payload at Target side,
<MT_Invoice>
<File Header>    1...1
<f1> customer invoices </f1>
<f2> 12/02/2010 </f2>
</File Header>
<Invocie header>
<f1> Invoice number1 </f1>
<f2> customer number1 </f2>
</Invoice header>
<Invoice text>
<f1> Inovice no1-text1 </f1>
</Invoice text>
<Invoice text>
<f1> Inovice no1-text2 </f1>
</Invoice text>
<Invocie header>
<f1> Invoice number2 </f1>
<f2> customer number2 </f2>
</Invoice header>
<Invoice text>
<f1> Inovice no2-text1 </f1>
</Invoice text>
<Invoice text>
<f1> Inovice no2-text2 </f1>
</Invoice text>
<Invocie header>
<f1> Invoice number3 </f1>
<f2> customer number3 </f2>
</Invoice header>
<Invoice text>
<f1> Inovice no3-text1 </f1>
</Invoice text>
<Footer> 1..1
<f1> have a great day </f1>
</footer>
</MT_Invoice>
for the above payload file should come as mentioned below
customer invoices 12/02/2010
invocie number1 customer no 1
invoice no1-text1
invoice no1-text2
invocie number2 customer no 2
invoice no2-text1
invoice no2-text2
invoice no2-text3
invocie number3 customer no 3
invoice no3-text1
have a great day
For to get the above payloadI have create a message type like
MT_invoice
header   1...1
   f1         1
   f2         1
invoice details   0... unbound
   f1           1
   f2           1
invoice text     0.... unbound
   f1
footer       1...1
   f1          1
Please correct me if my message type declaration was wrong...
Please suggest how do i need to approach for message mapping and as well as FCC in File adapter...
Edited by: Vidyadhar Kurmala on Dec 2, 2010 10:28 AM

It is not possible to create alternating nodes in graphical mapping tool.
I recommend using the MessageTransformBean for FCC, as this supports a 2-level hierarchy.
Then you add a node record like this:
<MT_Invoice>
<Record>
<File Header> 1...1
<f1> customer invoices </f1>
<f2> 12/02/2010 </f2>
</File Header>
</Record>
<Record>
<Invocie header>
<f1> Invoice number1 </f1>
<f2> customer number1 </f2>
</Invoice header>
<Invoice text>
<f1> Inovice no1-text1 </f1>
</Invoice text>
<Invoice text>
<f1> Inovice no1-text2 </f1>
</Invoice text>
</Record>
<Record>
<Invocie header>
<f1> Invoice number2 </f1>
<f2> customer number2 </f2>
</Invoice header>
<Invoice text>
<f1> Inovice no2-text1 </f1>
</Invoice text>
<Invoice text>
<f1> Inovice no2-text2 </f1>
</Invoice text>
<Invocie header>
<f1> Invoice number3 </f1>
<f2> customer number3 </f2>
</Invoice header>
<Invoice text>
<f1> Inovice no3-text1 </f1>
</Invoice text>
</Record>
<Record>
<Footer> 1..1
<f1> have a great day </f1>
</footer>
</Record>
</MT_Invoice>

File Content Conversion for Multi Hierarchical Structure for Sender Adapter

Hi Gurus,
My text file is coming as
Header,filed1,field2(Occurrence=1)
Content,field3,field4(Occurrence =1-Unbounded)
Detail,field4,field5(Occurrence = 1-unbounded)
Trailer,fieldN(Occurrence=1)
My requirement is to write a file content conversion, so that, in the resultant XML Structure the Detail will come under Content.
I have defined the Record Set Structure as
Header,1,Content,*,Detail,*,Trailer,1
But after FCC, the Detailed record is coming in the same level as the Content Record. But the business requires that, the Detailed Record should come under Content Record, so that they can correlate.
Could any one advise?
Regards,
SS
Edited by: Subhendu Sahu on Jun 17, 2011 4:43 PM

Hi,
Please use the below parameters -
○       NameA.keyFieldValue
Specify the value of the key field for the structure.
This entry is mandatory if the key field name is set. Otherwise, the entry is ignored.
NameA.keyFieldInStructure
■       If the key field of the substructure is to be added to the XML document, enter add. This is the default.
■       If the key field is to be ignored, enter ignore.
http://help.sap.com/saphelp_nwpi711/helpdata/en/44/6713ec3f914ddee10000000a1553f7/frameset.htm
cheers,
Sunil

Hierarchy on file content conversion for receiver?

Y'all,
I'm stuck in this problem and I haven't find a solution to solved it... so, all your clues and reply's are really appreciate...
The basic problem is a File content conversion for a receiver C.C. that is not working and it's raising some errors in the RWB, I have gone thru some blogs but I still having a lot of doubts...
I want to produce a flat TXT file that will have a line for every node or subnode, it doesn't matter if it's not represented as hierarchical structure like this one... but the records must be produced or written in the same order...
Man_Del_Header as main node with Man_Header, Delete_Detail and Trailer as subnodes...
<?xml version="1.0" encoding="UTF-8"?>
<ns1:MT_DISTRIBUTOR_DELETE xmlns:ns1="http://xxx.com/xi/POSout">
   <Man_Del_Header>
      <MD_Header>|HM|1|</MD_Header>
      <MD_StoreNumber>051</MD_StoreNumber>
      <MD_filler1>|2|0000|3|</MD_filler1>
      <MD_EffDate>09/17/07</MD_EffDate>
      <MD_filler2>|4|005|5|dsdvnd|7|</MD_filler2>
      <MD_BatchNumber>500</MD_BatchNumber>
      <MD_fiiller3>|8|</MD_fiiller3>
      <MD_BatchDescr>DELETE PREV CST BTCH</MD_BatchDescr>
      <MD_filler4>|10|D|</MD_filler4>
      <MD_linef>1</MD_linef>
      <Man_Header>
         <Man_Header>|HM|1|</Man_Header>
         <Man_StoreNumber>051</Man_StoreNumber>
         <Man_filler1>|2|0000|3|</Man_filler1>
         <Man_EffDate>09/17/07</Man_EffDate>
         <Man_filler2>|4|005|5|dsdvnd|7|</Man_filler2>
         <Man_BatchNumber>500</Man_BatchNumber>
         <Man_filler3>|8|</Man_filler3>
         <Man_BatchDescription>Delete Distributor</Man_BatchDescription>
         <Man_filler4>|</Man_filler4>
         <Man_linef>Constant</Man_linef>
      </Man_Header>
      <Delete_Detail>
         <Delete_Detail>|D|901|170|</Delete_Detail>
         <Delete_DistribNumber>0000005010</Delete_DistribNumber>
         <filler9>|</filler9>
         <delete_linef>1</delete_linef>
      </Delete_Detail>
      <Delete_Detail>
         <Delete_Detail>|D|901|170|</Delete_Detail>
         <Delete_DistribNumber>0000005011</Delete_DistribNumber>
         <filler9>|</filler9>
         <delete_linef>1</delete_linef>
      </Delete_Detail>
      <Trailer>
         <Trailer>|T|1|</Trailer>
         <TotalRecCnt>00005</TotalRecCnt>
         <filler1>|2|</filler1>
         <NoOfHeaders>00002</NoOfHeaders>
         <filler2>|3|</filler2>
         <NoOfAdds>00000</NoOfAdds>
         <filler3>|4|</filler3>
         <NoOfChanges>00000</NoOfChanges>
         <filler4>|5|</filler4>
         <NoOfDeletes>00002</NoOfDeletes>
         <filler5>|13|</filler5>
         <NoOfSubstitution>00000</NoOfSubstitution>
         <filler6>|</filler6>
         <linef>1</linef>
      </Trailer>
   </Man_Del_Header>
   <Man_Del_Header>
      <MD_Header>|HM|1|</MD_Header>
      <MD_StoreNumber>061</MD_StoreNumber>
      <MD_filler1>|2|0000|3|</MD_filler1>
      <MD_EffDate>09/17/07</MD_EffDate>
      <MD_filler2>|4|005|5|dsdvnd|7|</MD_filler2>
      <MD_BatchNumber>500</MD_BatchNumber>
      <MD_fiiller3>|8|</MD_fiiller3>
      <MD_BatchDescr>DELETE PREV CST BTCH</MD_BatchDescr>
      <MD_filler4>|10|D|</MD_filler4>
      <MD_linef>1</MD_linef>
      <Man_Header>
         <Man_Header>|HM|1|</Man_Header>
         <Man_StoreNumber>061</Man_StoreNumber>
         <Man_filler1>|2|0000|3|</Man_filler1>
         <Man_EffDate>09/17/07</Man_EffDate>
         <Man_filler2>|4|005|5|dsdvnd|7|</Man_filler2>
         <Man_BatchNumber>500</Man_BatchNumber>
         <Man_filler3>|8|</Man_filler3>
         <Man_BatchDescription>Delete Distributor</Man_BatchDescription>
         <Man_filler4>|</Man_filler4>
         <Man_linef>Constant</Man_linef>
      </Man_Header>
      <Delete_Detail>
         <Delete_Detail>|D|901|170|</Delete_Detail>
         <Delete_DistribNumber>0000005012</Delete_DistribNumber>
         <filler9>|</filler9>
         <delete_linef>1</delete_linef>
      </Delete_Detail>
      <Delete_Detail>
         <Delete_Detail>|D|901|170|</Delete_Detail>
         <Delete_DistribNumber>0000005013</Delete_DistribNumber>
         <filler9>|</filler9>
         <delete_linef>1</delete_linef>
      </Delete_Detail>
      <Delete_Detail>
         <Delete_Detail>|D|901|170|</Delete_Detail>
         <Delete_DistribNumber>0000005014</Delete_DistribNumber>
         <filler9>|</filler9>
         <delete_linef>1</delete_linef>
      </Delete_Detail>
      <Trailer>
         <Trailer>|T|1|</Trailer>
         <TotalRecCnt>00006</TotalRecCnt>
         <filler1>|2|</filler1>
         <NoOfHeaders>00002</NoOfHeaders>
         <filler2>|3|</filler2>
         <NoOfAdds>00000</NoOfAdds>
         <filler3>|4|</filler3>
         <NoOfChanges>00000</NoOfChanges>
         <filler4>|5|</filler4>
         <NoOfDeletes>00003</NoOfDeletes>
         <filler5>|13|</filler5>
         <NoOfSubstitution>00000</NoOfSubstitution>
         <filler6>|</filler6>
         <linef>1</linef>
      </Trailer>
   </Man_Del_Header>
</ns1:MT_DISTRIBUTOR_DELETE>
|HM|1|051|2|0000|3|09/17/07|4|005|5|dsdvnd|7|500|8|DELETE PREV CST BTCH|10|D|1
|HM|1|051|2|0000|3|09/17/07|4|005|5|dsdvnd|7|500|8|Delete Distributor|Constant
|D|901|170|0000005010|1
|D|901|170|0000005011|1
|T|1|00005|2|00002|3|00000|4|00000|5|00002|13|00000|1
|HM|1|061|2|0000|3|09/17/07|4|005|5|dsdvnd|7|500|8|DELETE PREV CST BTCH|10|D|1
|HM|1|061|2|0000|3|09/17/07|4|005|5|dsdvnd|7|500|8|Delete Distributor|Constant
|D|901|170|0000005012|1
|D|901|170|0000005013|1
|D|901|170|0000005014|1
|T|1|00006|2|00002|3|00000|4|00000|5|00003|13|00000|1
So as you can see, i wanna produce a flat file that will have line or record for each node, it doesn't matter that it has a hierarchy or a deeper level, it should be a simple flat file...
The thing is that i have been trying to setup the receiver comm. channel and it's raising some errors like Could not process due to error:
<i>java.lang.Exception: Exception in XML Parser (format problem?):'java.lang.Exception: Message processing failed in XML parser: 'java.lang.Exception: Consistency error: more fields found in XML structure than specified in conversion parameters! (Value 'XXXX')', probably configuration error in file adapter (XML parser error)'</i>
I have checked this blog:
/people/karthiknarayan.kesavan2/blog/2007/08/22/file-content-conversion-for-multi-hierarchical-structure
Unfortunately i don't know if there's another way to achieve this...

Jerry,
it easy if you go with multi mapping concept and without BPM if you are above >XI3.0 SP14.and use Append mode in the receiver file adapter.
just create the target structure like root under that Man_Del_Header,Man_Header,Detail,Trailer at the same level but got be careful with occurences.
<b>Source:</b>
I think from your structure you have
Man_Del_Header (1-unb)
Man_Header   (1-1)
detail   (0-unb ) may be (1-unb)
trailer (1-1)
create <b>target DT</b> like:
ROOT
..Man_Del_Header (1-1)
..Man_Header   (1-1)
..detail   (0-unb ) may be (1-unb)
..trailer (1-1)
all are at same level under ROOT.
create MT,MI,MM,IM.
in MM just map correspoding fields and if you have any unbounded onces map the nodes too. and map Man_Del_Header in the source to MT_XYZ (important)
and in the MM go to MESSAGES tab and change the occurences of the target Message to 0-unbounded same way in the interface mapping 0-unbounded.
here it create anothe extra node in the mapping something like Message1,this is ok.
and in ID just create all other objects like as usual except creating Interface determination ,in that select the extended radio button.
in reciever File CC use FCC ,would be very simple in the recordsetstrcture give
your four nodes Man_Del_Header,Man_Header,Detail,Trailer.
and use either fixed or field seperator.use append mode in recv File CC otherwise it will generate files as many occurences your source "Man_Del_Header" has ,cos we are mapping it to the MT--xyz .
thats it you are ready to go...
if any error post back here again.
you can make use of this thread
/people/jin.shin/blog/2006/02/07/multi-mapping-without-bpm--yes-it146s-possible (here there are two target DT ,but you just create one DT,remaining are similar)
good luck.
Babu

Problem in File content Convertion ?

Hi experts,
i have a probelm in file content convertion......iam geting flat file with tab delimiter so how to convert it?
Name.filedSeperator under this how to pass the vaule....please send docs on file content convertion.
Note:helpfull answer will be rewarded.
regards,
phani

Hi;
Have a look
help link for Receiver file adapter (FCC) - http://help.sap.com/saphelp_nw04/helpdata/en/d2/bab440c97f3716e10000000a155106/content.htm
These are a collection of blogs on content conversion (both receiver and sender)
/people/venkat.donela/blog/2005/03/02/introduction-to-simplefile-xi-filescenario-and-complete-walk-through-for-starterspart1
/people/venkat.donela/blog/2005/03/03/introduction-to-simple-file-xi-filescenario-and-complete-walk-through-for-starterspart2
/people/venkat.donela/blog/2005/06/08/how-to-send-a-flat-file-with-various-field-lengths-and-variable-substructures-to-xi-30
/people/anish.abraham2/blog/2005/06/08/content-conversion-patternrandom-content-in-input-file
/people/shabarish.vijayakumar/blog/2005/08/17/nab-the-tab-file-adapter
/people/jeyakumar.muthu2/blog/2005/11/29/file-content-conversion-for-unequal-number-of-columns
/people/shabarish.vijayakumar/blog/2006/02/27/content-conversion-the-key-field-problem
/people/michal.krawczyk2/blog/2004/12/15/how-to-send-a-flat-file-with-fixed-lengths-to-xi-30-using-a-central-file-adapter
/people/arpit.seth/blog/2005/06/02/file-receiver-with-content-conversion
Mudit

How do I import Map Info Tab files into Spatial for a map of europe?

How do I import Map Info Tab files into Spatial for a map of europe via FME and have oracle spatial draw the map without problems?
So far I've got to the stage where I can import the data, spatially index it (in oracle 9i) and get my SVG (scaleable vector graphics) application to view the map.
The problem is that countries that have more than one polygon (more than one row in the database) do not draw properly.
When I view the Map Info tab file in the FME viewer I can see that the data is fine, but I can also see that some of the polygons used to draw a country are donugts and some aren't.
This seems to cause a problem when I import the data into oracle spatial as I don't know if a row in the table needs to be inserted as an independent SDO_GEOMETRY or if it should form part of a larger SDO_GEOMETRY (as in 2 or more rows make up the polygon shape for a country).
I have a feeling that I'm not using FME correctly, because at the moment I have to import the tab file into Oracle then re-insert the data into a spatially formatted table (one with a spatial index) - I get the impression that FME should do that for me but as I'm new to this I don't really know.
Any Help welcome :|
Tim

Tim,
MapInfo has a free utility called EasyLoader that allows you to upload a table directly to Oracle. EasyLoader creates the geometries and spatial index. You can download it free from http://www.mapinfo.com/products/download.cfm?ProductID=1044
Andy Greis
CompuTech Inc.

File Content Conversion for Unequal Number of Columns

Hi,
Iam following this thread FCC for Unequal Number of Columns.
/people/jeyakumar.muthu2/blog/2005/11/29/file-content-conversion-for-unequal-number-of-columns
when iam doing ,iam getting an error
Conversion initialization failed: java.lang.Exception: java.lang.Exception: java.lang.Exception: Error(s) in XML conversion parameters found: Parameter 'TOTALSET.fieldFixedLengths' or 'TOTALSET.fieldSeparator' is missing Consistency check: no. of arguments in 'TOTALSET.fieldFixedLength' does not match 'TOTALSET.fieldNames' (0 <> 1)
My conversion parameters are
Recordset Structure                      : TOTALSET,*
TOTALSET.fieldNames                 : ITEMSET
ignoreRecordsetName                   : true
TOTALSET.fieldSeparator              : 'nl'
My file structure is as below
01,021000021,G4886704,080919,0742,001,,,2
02,G4886704,021000021,1,080918,0742,,2
03,000000135073477,,010,105303839,,,015,489113155,,,045,489039455,,,072,73700
Please help in resoving the error.
Thanks in Advance
Srinivas

Hi Srivinas,
your file structure is as below
01,021000021,G4886704,080919,0742,001,,,2
02,G4886704,021000021,1,080918,0742,,2
03,000000135073477,,010,105303839,,,015,489113155,,,045,489039455,,,072,73700
So it's easy, you have to use KEYFIELD option, coz you have something like that :
Line 1 : keyfield = 01 following by a limited number of columns (e.g 30 fields for Structure1)
Line 2 : keyfield = 02 following by a limited number of columns (e.g 14 fields for Structure2)
Line 3 : keyfield = 03 following by a limited number of columns (e.g 23 fields for Structure3)
Thanks to the Keyfield, you define a field which is present in each line that you can used to distinguished the different structures of lines. In your case, it seems that the keyfield is the first column (01, 02, 03).
Try to use that:
Recorset = TOTALSET         (and don't use option "ignoreRecordsetName : true")
Recordset structure =Structure1,1,Structure2,(star),Structure3,(start)       (the difficulty will be to find the good use of "*" and "1", but after some tests you will find the good one).
Note: replace (start) by the character " * "
Key field value = keyfield
Key field type = String (case sensitive)
Structure1.fieldNames = keyfield,field2, field3 etc.. of Structure1
Structure2.fieldNames = keyfield,field2, field3 etc.. of Structure2
Structure3.fieldNames = keyfield,field2, field3 etc.. of Structure3
and then you will have a XML like that:
TOTALSET
Structure1 and all its fieldN
Structure2 and all its fieldN
Structure2 and all its fieldN
Structure3 and all its fieldN
Structure3 and all its fieldN
TOTALSET
Structure1 and all its fieldN    because I used Structure1,1
Structure3 and all its fieldN
Regards.
Mickael
Edited by: Mickael Huchet on Apr 20, 2009 5:18 PM
Edited by: Mickael Huchet on Apr 20, 2009 5:19 PM

Can we handle content convertion for TabDelimiter flat file in JMS

Hi,
Is it possible to handle content conversion for TabDelimiter flat file in JMS (Not in FILE adapter).
If possible .. can you please explain.
Regards,
Siva.

Hi, Siva:
Yes, this is possible.
The way that JMS adapter to handle content cnversion is similar to the way file adapter does.
Different from file adapter, you do not have to specify "Content Conversion" as transport protocol, you need to use transformation bean (localejbs/AF_Modules/MessageTransformBean) in Module tab.
Check page 23 of the following link:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/a05b2347-01e7-2910-ceac-c45577e574e0
Liang

File Content Conversion for ignoring the entire line

Hi,
   I'm getting a CSV file from that i want to skip some records based on some validation.. for example:
I'm getting the following data :
EmpNo                   EmpName                   EmpDept
E101                       ABC                               ABAP
E102                       XYZ                                BW
E103                       GFC                               XI
E104                       BVM                               ABAP
E105                       ASD                               BW
E106                       YFC                                XI
SO, here where ever i'm getting EmpDept = XI .. i want to skip those all the records( that entire line i want to skip).. .. this can be possible through Message Mapping.. but i wnat to do this in the File Content Conversion.. how can we do this..
any helpful answers   will appriciated..
Thanks
babu

Hi,
FCC is used to generate the XML structure so that XI can understood properly. You can not do any kind of validations or Skip the records based on Element value condition in FCC.
There are scenarios where you want to skip the lines that time you can use the below option in FCC but this is again not based on condition.
Under Document Offset, specify the number of lines that are to be ignored at the beginning of the document.
This enables you to skip comment lines or column names during processing. If you do not make an entry, the default value is zero lines.
The best way to do is use the UDF:
Write an UDF on target root node.
take input in one context:
input a= Emp Dept:
for(i=o,i<a.length;i++)
if(a{i}.equals("X"))
   result.addValue(SUPPRESS); this will supress the target root node if condition is equal to X
else
result.addValue("Constant"); this will generate the target root node.
Thnx
Chirag

Content Conversion for multi level heirarchy

Gurus,
I have the following scenario
FileXIFile
Input File structure is as follows
FH|............ (occurs 1)
FE|............. (occurs *)
FED|........... (child of FE and can occur * under FE)
FT|.............. (occurs 1)
The file contents are pipe delimited.
Example file
FH|.....
FE|........
FED|........
FED|.........
FE|.......
FED|........
FT|............
As stated above, FED recordtype can occur multiple times under FE
My inbound message structure is
.....Header (1)
........ErrorRecord (0,unbounded)
.............ErrorDataRec (0,unbounded)
.....Trailer (1)
Recordset Structure - Header,1,ErrorRecord,,ErrorDataRec,,Trailer,1
Recordset Sequence - Variable
KeyFieldName - RecordType
Content Parameters
   I have defined field separator as pipe for each recordset
   I have defined keyFieldValue for each recordset
   I have defined fieldNames for each recordset
Here is my problem
The file loads ok. However, ErrorDataRec loads at the same level as ErrorRecord rather than loading under it.
I have played with fieldNames to define ErrorDataRec as a field under ErrorRecord and not definining as one, doesnot seem to make a difference.
I need someway to tell the parser that ErrorDataRec needs to be loaded as a substructure of ErrorRecord.
Anyone has any ideas?
Regards
Haseeb

VJ,
You are absolutely right it is not possible to get multiple hierarchy using file content conversion.
Splitbyvalue function would not work in my scenario as I need to group FED records based on first few characters in the first column of FED records. I wrote a UDF to insert context change based on the column value.
Thanks again for your help.
Regards
Haseeb

File Content Convertion

HI Experts,
My scenario was Idoc to File.
*Issue: I had mapped Source idoc with A,B,C,D fields.
I want only A,B,C at final structure.*
I cannot ignore D field in message mapping as i am using that field for file name Substitution in receiver communivcation channel target file name.
In my receiver CC i have given,
XX01.fieldNames: A,B,C
But still i am getting A,B,C,D in target structure.
thanks in advance

Hi,
You have to set the file name in header message field instead of entering in payload message field. Doing that
you avoid creating D node in message mapping.
Then, it is the same using variable sustituion in File Receiver adapter.
To recovery this value, follow this link. (Advanced Tab Page
Variable Substitution (Target Directory/File Name Scheme))
http://help.sap.com/saphelp_nw04s/helpdata/en/bc/bb79d6061007419a081e58cbeaaf28/content.htm
Carlos

Exception Handling for Multi Mapping in bpm

Hello,
does anybody know a way of catching an error occured in a multi-mapping used in an integration process.
It seems to me, that when i am using a multi-mapping in an integration process and an error occurs, the message cannot get back to the integration process. In smq2 I can see, that there is the following error:
CX_MERGE_SPLIT
Regards
Günther

The transformation-step is in an block with an exception branch and it is well configured.
When I use a 1 to 1 mapping and an error in the mapping occurs, all is correct. The integration process jumps in to the exception branch and finishes correct. But when use a multi mapping (1 to n; n to 1; n to m) and an error in the mapping occurs, then there is always an error in the bpe inbound queue.
There must be some problem with the split-and-merge program. I think that the split-and-merge program handles the merging of n messages into 1. You can see this when you test a mapping in the integration builder designer. In a multi-mapping there you can see a xml-structure that envelopes the application messages, f. ex.:
<ns0:Messages xmlns:ns0="http://sap.com/xi/XI/SplitAndMerge">
   <ns0:Message1>
      <myMessage1>data</myMessage1>
   </ns0:Message1>
   <ns0:Message2>
      <myMessage2>data2</myMessage2>
   </ns0:Message2>
</ns0:Messages>

File content conversion for Pipe delimited file

Hi
i have a scenario ( file-xi-proxy) in whch file is coming in a pipe delimited.
my data type is like
DT_ XXXXX
AwardInfo
Header contains some fileds
DetailRecord contains some fileds
trailer contains some fields
what are content conversion parameters i have to use
venkat

Sedamkar,
Expecting you have one header, multiple details and one trailer then give recordset structure in sender file communication channel as:
Header,1,DetailRecord ,*,trailer,1
In content conversion you should give parameters:
Header.fieldSeparator : |
Header.endSeparator : 'nl'
DetailRecord.fieldSeparator : |
DetailRecord.endSeparator : 'nl'
trailer.fieldSeparator : |
trailer.endSeparator : 'nl'
You may need to change the parameters also according to your strcuture and the file layout. See this SAP help for file content conversion:
http://help.sap.com/saphelp_nw04/helpdata/en/e3/94007075cae04f930cc4c034e411e1/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/2c/181077dd7d6b4ea6a8029b20bf7e55/content.htm
Regards,
---Satish

Reg:File content conversion for Sender File Adaptor

Hi all,
            i would like to know , how the file content conversion is written for the below mentioned XML code. The flat file will have only the table name and the fieldname
<?xml version="1.0" encoding="UTF-8"?>
<ns0:Mt_File xmlns:ns0="http:/file_to_idoc">
   <query_table>ztable1</query_table>
   <row_count/>
   <Fields>
      <item>
         <fieldname>zempno</fieldname>
      </item>
   </Fields>
</ns0:Mt_File>
regards
priya

First you create the conversion rules, then you create the XML structure accordingly, not the other way.
online help will help you

FILE CONTENT CONVERTION HELP...?

Hi folks,
   can anyone help mre giving file content conversion parameters for the below example.
case 1 : ID, NAME, AGE
              201, ABCDE,25
for the above case we use row.fieldNames, row.fieldSeperator, row.endSeperator.
but if the case is like below.
case 2 : ID,"NAME1,NAME2",AGE
              202,"ABC,DEF",26
what content parameters should be use for the above case. Here field seperator is expected between the quote's.
thanks in advance.
Srinivas reddy

Hi,
If you want to use NAME1 & NAME2 as single field then use xml.enclosureSign=" and xml.enclosureSignEsc=" " in your FCC.
u can also refer http://help.sap.com/saphelp_nw04/helpdata/EN/2c/181077dd7d6b4ea6a8029b20bf7e55/content.htm
& How to solve extra commas in CSV files in FCC..!!
Reg,
NJ
Edited by: nishu jain on Apr 7, 2010 10:49 AM
Edited by: nishu jain on Apr 7, 2010 10:49 AM

File content convertion for multi mapping occurance 1:N

Similar Messages

Maybe you are looking for