File Contente Conversion w/o keyFieldValue
Hi folks,
Iu2019ve the following flat file for my sender file adapter:
HD00287u2026
12332341999933459
41324321453213242
TR
HD00288u2026
12332341999933459u2026
41324321453213242u2026
15332341999933459u2026
41325421453213242u2026
TR
Where HD is the header key field and TR the trailer key field; however for the body lines I donu2019t have any key field to match each body line.
Is it anyway to convert this flat file in XML with the File Content Conversion of file adapter? Iu2019ve been searching and I think the standard parameters donu2019t fulfill this requirement, I must have a key field, but maybe Iu2019m wrongu2026 maybe you know some workaround.
My second approach would be an ejb module to include u201CBDu201D key on each line without HD or TR. Afterwards, the standard module converts the flat file in a XML with the configuration of the file content conversion.
Let me know if it is possible to do it with file content conversion. No problem with ejb, but I donu2019t want to create an enhancement if the standard fulfill the requirement.
Thanks in advance,
Ricardo.
Hi
I think the blog 1825, can be used to try out something in ur scenario..
you have Header and Trailer.. so thats standard..
for rest of the lines, you can create a structure like hbatch in the blog
like below (define this 10 times)
--<htbatch0> (Zero to unbounded)
<key0>
<Value0>
--<htbatch1> (Zero to unbounded)
<key1>
<Value1>
for all 10 digits (say 0,1,2...9) specifying the first digit to be the Key (as like blog)
by doing this, the first digit is considered as Key and all similar lines are grouped
Not sure, how the FCC behaves, but I expect..
that all the data will be converted into the above structure, but sorted based on starting digit
all lines starting with 0 in first set of groups <hbatch0>
all lines starting with 1 in next set of groups and so on..
If this works, the next thing is that your sequence of your data would be re-arranged (sorted)
Regards
Vishnu
Similar Messages
-
File content conversion - keyFieldValue
Hello everybody,
Is there a way to generate more than one Detail.keyFieldValue in the File Content Conversion? , the reason for this question is that I have a file like this.
00 value value value value value
01 value value value value value
01 value value value value value
02 value value value value value
69 value value value value value
99 value value value value value
And the Structure should be like this.
Header
00 value value value value value
Detail
01 value value value value value
01 value value value value value
02 value value value value value
69 value value value value value
99 value value value value value
In my header the keyFieldValue is 00, but in the Detail could be 01 and 02 and 69 and 99 as just one Detail?
Regards,I have performed this type of mapping before... Below is the approach that i followed..
You have to do a 2 level mapping..
Construct the below XML msg to read the flat file into an intermediate XML structure...
<DT_XXX>
.<Recordset>
..<Rec_00> 1.1
..<Rec_01> (0..unbounded)
..<Rec_02> (0..unbounded)
..<Rec_69> (0..unbounded)
..<Rec_99>(0..unbounded)
</Recordset>
<DT_XXX>
Rec_00.keyfield = 00
Rec_01.keyfield = 01
Rec_02.keyfield = 02
Rec_69.keyfield = 69
Rec_99.keyfield = 99
Rec_00.endSeperator - 'nl'
Rec_00.fieldFixedLengths - provide
Rec_00.fieldNames - Field1,field2....
Rec_00.processFieldName - fromconfiguration
Then as Step2, perform a mapping to convert this into the required XML structure...
<DT_XXX>
<Header> </Header>
<Details>
<Rec_01>
<Rec_02>
<Rec_69>
<Rec_99>
</Details>
<DT_XXX> -
Problem with File Content Conversion
Hi All
I am facing a problem with file content conversion.
This is my sample file structure:
Header_Record (Occurance - 1)
Field1 in Header
Field2 in Header
Item(Occ-1 to n)
Field3 in Item
Field4 in Item
<<ItemType>> (Structure in Item) (Occ - 0 to n)
<<Field5>> in ItemType
<<Field6>> in ItemType
<<ItemTypeCategory>> (Structure in ItemType)(Occ - 0 to n)
<<<<Field7>>>> in ItemTypeCategory
<<<<Field8>>>> in ItemTypeCategory
Footer_Record (Occurance-1)
Field9
Field10
There is a key field 'Type' in all the above records with unique value in each record.
Now, I defined Field content conversion as follows:
Recordset Structure: Header_Record,1,Item, * , ItemType, * ,ItemTypeCategory, * ,Footer_Record,1
Recordset Sequence: Ascending
KeyField Name: Type
Following are parameters defiled:
Header_Record.Keyfieldvalue: 00
Header_Record.fieldseperator: ,
Header_Record.fieldnames: Field1,Field2
Header_Record.endseperator: 'nl'
Item.keyfieldvalue: 05
item.fieldseperator: ,
item.fieldfieldnames: field3,field4
item.endseperator: 'nl'
ItemType.keyfieldvalue: 10
itemType.fieldseperator: ,
itemType.fieldfieldnames: field5,field6
itemType.endseperator: 'nl'
ItemTypecategory.keyfieldvalue: 15
itemTypecategory.fieldseperator: ,
itemTypecategory.fieldfieldnames: field7,field8
itemTypecategory.endseperator: 'nl'
Footer.keyfieldvalue: 20
Footer.fieldseperator: ,
Footer.fieldfieldnames: field5,field6
Footer.endseperator: 'nl'
Now, i pass the following file:
00,111
05,222
10,333
15,444
20,555
What i expect out of my FCC is this (Sample output to show the hierarchy of field values):
00,111
05,222
<<10,333>>
<<<<15,444>>>>
20,555
But, I am getting this output (Hierarchy is missing. All the structures are in the same order without hierarchy):
00,111
05,222
10,333
15,444
20,555
Field values are being identified according to field content conversion, but, the hierarchy of the fields is missing.
Can you please tell me how should i change my FCC config?
Sorry for this long question.
Many Thanks
Chandra
Edited by: Chandra Sekhar H on Jan 30, 2009 7:10 PM
Edited by: Chandra Sekhar H on Jan 30, 2009 7:16 PM
Edited by: Chandra Sekhar H on Jan 30, 2009 7:17 PMYou will always get a flat structure from FCC. If you want hierarchichal strucuture, you have to create a target and map. You will get only like -
Root
--Recordset
Group1
Fields
Grop2
Fields
Group3
Fields
VJ -
File Content Conversion Error in PI 7.1 (file to Proxy)
Hi
I am working on File to Proxy Scenario and I gave the File content conversion as below, File is picking up by the PI Server when I look at Communication Channel Monitoring, However when I open the Message ID in the CC monitoring it says as
404 Not Found
The requested resource does not exist.
and I do not see any message SXMB_MONI(Because the content is not converted), Can anyone give an idea how to debug this
Thanks
PR
Please find the details below which I gave in the content Conversion
Document Name : MT_TW_AK
Document NameSpace : http://aiwcd.com/Claims_Management(CM)_Rel2.0
RecordSet Name : FROISROIAcknowledgement
RecordSet Structure : Header,1,Record,*,Trailer,1
Recordset Sequence : Ascending
KeyField Name :TransactionSetID
Key Field Type : String (Case Sensitive)
IgnoreRecordsetName : true
Header.fieldNames :TransactionSetID,SenderID,ReceiverID,DateTransmissionsent,TimeTransmissionsent,OriginalTransmissionDate,OriginalTransmissionTime,TestProductionCode,InterchangeVersionID
Header.fieldFixedLengths: 3,25,25,8,6,8,6,1,5
Header.keyFieldValue : H
Record.fieldSeparator :
Record.fieldNames : TransactionSetID,RecordSequenceNumber,DateProcessed,TimeProcessed,InsurerFEIN,ClaimAdministratorPostalCode,ClaimAdministratorFein,AcknowledgementTransactionSetID,ApplicationAcknowledgmentCode,InsuredReportNumber,ClaimAdministratorClaimNumber,JuridictionClaimNumber,MaintenanceTypeCode,MaintenanceTypeCodeDate,RequestCode,FreeFormText,NumberofErrors,MaintenanceTypeCorrectionCode,MaintenanceTypeCorrectionCodeDate,JurisdictionBranchOfficeCode,ClaimAdministratorAlternatePostalCode,NumOfErrors
Record.fieldFixedLengths: 3,9,8,6,9,9,9,3,2,25,25,25,2,8,3,60,2,2,8,2,9,19
Record.keyFieldValue : A
Trailer.fieldNames:TransactionSetID,DetailRecordCount,TransactionCount
Trailer.fieldFixedLengths: 3,9,9
Trailer.keyFieldValue : T
ignoreRecordsetName: truePR,
Can you check the error in sender communication channel?
Go to RWB ---> Component Monitoring ---> Adapter Engine ---> Communication cahnnel monitoring --> it displays new page. Then give your file sender communication cahnnel name. There you will definitely see some error.
The error what you are getting is a different to this one. Can you please check the error what I have given above path.
Regards,
---Satish -
File-Sender: Verification of file content during file content conversion
Hello,
I have a question regarding file verification when using the file-sender adapter.
I got a flat file (.csv) that I convert into XML with the file-sender adapter and file-content-conversion.
In the file there is a column RecTyp that is my KeyFieldValue. Possible values for RecTyp are B, D, U, T.
So far so good. All this works perfectly.
If (due to an error) there is another value in RecTyp than the 4 mentioned above (B;D;U;T) the file adapter ignores this row today. And here begins my issue:
I want to change this behavior. That means in detail, I want to check if there is another value in my KeyFieldValue RecTyp than specified. If this is the case an exception should be thrown. The whole message should not be delivered.
We had the idea to use the module-processor for this verification .
But may be there are other suggestions. Or may be some one can provide an appropriate module that is already written, etc .
Does anyone have an idea?
Kind regards,
TobiasHi,
It is better to pick the file in generic way i.e Row by Row and then go with the validation with the help of Adapter Modules or in the Mapping.
For more-
/people/sravya.talanki2/blog/2005/08/16/configuring-generic-sender-file-cc-adapter
Thanks,
Moorthy -
Error in configuring File Sender Adapter with File Content Conversion
Hi
i am designing a File to File scenario using file content conversion in which the input is comma separated file and output is a XML document.
mentioned below are the configuration information:
Recordset Name: Substr
Substr.fieldSeparator: ,
Substr.endSeparator: 'nl'
Substr.fieldNames: Name, Password
Substr.keyFieldValue: Name
and the error i can see in adapter framework is:
Sender Adapter v0830 for Party '', Service 'FileContentConversion':
Configured at 14:30:45 2005-04-07
Initialization error: Conversion initialization failed with java.lang.Exception: java.lang.Exception: java.lang.Exception: Error(s) in XML conversion parameters found:
Mandatory parameter 'Substr.fieldNames': no value found
plz help me ASAP.
thanks and regards,
Varun JoshiHi Varun...
Regarding ur error.....the name and password u send in csv is not getting recognised.. so u have to check the data type structure.
there must be a recordset name and subelement must be recordset structure..the data type must be
<datatypename>
<recordsetname>
<recordsetructurename>
<name>
<password>
please try in this format and ur name and password will get recognised -
File content conversion in Sender Adapater for multiple occurances
Hi ,
I am mapping from flat file to idoc .
My flat file is a tab demilited
Since the idoc would have structure
like header , lineitem , schedule
in my flat file conversion
i am giving recordset structure
as header,1,lineitem ,,schedule,
since lineitem would be repeated many times
Bt if i give * i need to give a keyfieldname
which would mean that keyfieldname has to appaer in header and schedule .
since in my case my Column values in header , lineitem and schedule are different
how can i do the file conversion in this case
i can doing something like this
header.keyFieldValue ""
schedule.keyFieldValue ""
header.keyFieldInStructure ignore
schedule.keyFieldInStructure ignore
i am not even sure if thats the correct way
Thanks
AmitHi Amit,
Take a look at these...
/people/shabarish.vijayakumar/blog/2005/08/17/nab-the-tab-file-adapter
/people/jeyakumar.muthu2/blog/2005/11/29/file-content-conversion-for-unequal-number-of-columns
/people/anish.abraham2/blog/2005/06/08/content-conversion-patternrandom-content-in-input-file
cheers,
Prashanth
P.S Please mark helpful answers -
Sender adapter: File content conversion suggestion
Hi all,
I require your suggestion on File content conversion with Sender File adapter. I am having a scenario where I would be getting multiple orders data i.e., header and item information in a single file. Suppose, we have given a chance to design the source structure. So, which would be the better way for having the source structure so that it would be easy for file content conversion and mapping. Is it like Method 1 or Method II?
Method I:
Orderno,FieldA,FieldB,FieldC
Orderno,OrderItem,Field1,Field2,Field3,Field4,Field5
Orderno,OrderItem,Field1,Field2,Field3,Field4,Field5
Orderno,OrderItem,Field1,Field2,Field3,Field4,Field5
Orderno,FieldA,FieldB,FieldC
Orderno,OrderItem,Field1,Field2,Field3,Field4,Field5
Orderno,OrderItem,Field1,Field2,Field3,Field4,Field5
Orderno,FieldA,FieldB,FieldC
Orderno,OrderItem,Field1,Field2,Field3,Field4,Field5
Method II:
Orderno,FieldA,FieldB,FieldC
Orderno,FieldA,FieldB,FieldC
Orderno,FieldA,FieldB,FieldC
Orderno,OrderItem,Field1,Field2,Field3,Field4,Field5
Orderno,OrderItem,Field1,Field2,Field3,Field4,Field5
Orderno,OrderItem,Field1,Field2,Field3,Field4,Field5
Orderno,OrderItem,Field1,Field2,Field3,Field4,Field5
Orderno,OrderItem,Field1,Field2,Field3,Field4,Field5
Orderno,OrderItem,Field1,Field2,Field3,Field4,Field5
If you suggest method I, can you let me know how the content conversion parameters look like?
Thanks in Advance,
Adithya K
Message was edited by:
Adithya KAdithya,
Looking at your input file I think a structure as below would be better.
<Order_Data>
<Orderno>
<Orderno/>
<FieldA/>
<FieldB/>
<FieldC/>
</Orderno>
<Items>
<Orderno/>
<OrderItem/>
<Field1/>
<Field2/>
<Field3/>
<Field4/>
<Field5/>
</Items>
</Order_Data>
Content Conversion Parameters for this would be:
RecordSet Structure OrderData,,Orderno,1,items,
OrderData.fieldNames Orderno,items
OrderData.fieldSeparator 'nl'
OrderData.endSeparator 'nl'
Orderno.fieldNames Orderno,FieldA,FieldB,FieldC
Orderno.fieldSeparator ,
Orderno.endSeparator 'nl'
items.fieldNames Orderno,OrderItem,Field1,Field2,Field3,Field4,Field5
items.fieldSeparator ,
Items.endSeparator 'nl'
ignoreRecordsetName true
Depending on which are your key fields you will have to put two more parameters:
Orderno.keyFieldValue
items.keyFieldValue
Hope this would be of some help.
Thanx,
Manju. -
File content conversion sender adapter
Hi Friends,
I am doing File to IDoc scenario.
I am using File Content Conversion for File Adapter.
My structure look like this
MT_File
HEADER1 1..1
--header1
-- header2
HEADER2 1..1
--header3
DETAILS 1..unbounded
--details1
--details2
--details3
TRAILER1 1..1
-- trailer1
TRAILER2 1..1
-- trailer2
----trailer3
In File Content conversion parameeters..
Document Name :MT_File
Document Namespace :urn:test:FileFcctoIdoc
RecordSet name :
RecordsetStructure :HEADER1,1,HEADER2,1,DETAILS,*,TRAILER1,1,TRAILER2,1
RecordSet Structure: Ascending
RecordSet Per message : *
Key Field Name :header1,header3,details1,trailer1,trailer3
ignoreRecordsetName : true
HEADER1.fieldNames :header1,header2
HEADER1.keyFieldValue : H1
HEADER1.fieldFixedLengths :5,10
HEADER1.endSeparator :'nl'
HEADER2.fieldNames :header3
HEADER2.keyFieldValue : *D
HEADER2.fieldFixedLengths :5
HEADER2.endSeparator :'nl'
DETAILS.fieldNames :details1,details2,details3
DETAILS.keyFieldValue : 3
DETAILS.fieldFixedLengths :5,5,5
DETAILS.endSeparator :'nl'
TRAILER1.fieldNames :trailer1
TRAILER1.keyFieldValue : *S
TRAILER1.fieldFixedLengths :5
TRAILER1.endSeparator :'nl'
TRAILER2.fieldNames :trailer2,trailer3
TRAILER2.keyFieldValue :SE TRAILER2.fieldFixedLengths :5,5
TRAILER2.endSeparator :'nl'
File is :
H1hh1hhhhhhhhh2
*Ddd*
Xddd1dddd2dddd3
Xddd4dddd5dddd6
Xddd7dddd8dddd9
*Sss*
SEKss2
in RWB, Channel CC_FILE_Sender_FccDemo: Empty document found. Proceed without sending message
I think the problem is in FCC paramters..
Could please have a look and correct me
Regards
RamRam,
The problem which i can see is your key field values in your test file. Remember you should have the key field value in each new line at the same place.
For example you have given your text file as shown below...
File Given By You is :
>H1hh1hhhhhhhhh2
>*Ddd *
>Xddd1dddd2dddd3
>Xddd4dddd5dddd6
>Xddd7dddd8dddd9
>*Sss *
>SEKss2
Compair the above file with the below one..
>H1hh1hhhhhhhhh2
>*Ddd *
>Xddd1dddd2dddd3
>Xddd4dddd5dddd3
>Xddd7dddd8dddd3
> *Sss *
>SEKss2
If you notice, for details I have given key field value 3 in each line & at same place.
One more thing just use the KeyFieldName only one ( just follow the same blog which I have given, to understand how to use the KeyFieldName )
e.g.
Document Name :MT_File
Document Namespace :urn:test:FileFcctoIdoc
RecordSet name :
RecordsetStructure :HEADER1,1,HEADER2,1,DETAILS,*,TRAILER1,1,TRAILER2,1
RecordSet Structure: Ascending
RecordSet Per message : *
Key Field Name : KF
Regards,
Sarvesh -
Problems in File Content Conversion
Hello,
I am trying to convert a text file to an XML using File Content Conversion in XI 3.0.
The incoming text file gets picked up but no message is sent and hence no message is received in the monitor.I get the following log-
<b>Success</b> Channel FILE_SENDER_XML_1: Entire file content converted to XML format
<b>Warning</b> Channel FILE_SENDER_XML_1: Empty document found. Proceed without sending message
<b>Success</b> File "C:\xi_public\i033066\dme_in.txt" deleted after processing
Can somebody help me on this
Thanks
SandeepHello,
I am not sure of why the empty Payload is created.
I have the following TXT file -
<b>LINE 1</b> 01 22 Sandeep ASKDJKLASD HDFC Bank 12342 asdasd 123569
<b>LINE 2</b> 02 22 Sagar 23123 ICICI 4234 ASDASD 254636 12304 ASDAsdqwe
<b>LIME 3</b> 03 22 1 12304
Ignore 'Lines' above.They are not part of the file.
I have given the following parameters -
<b>Document Name -</b> SampleMessageType
<b>Document Namespace -</b> http://sandeep/xi/bpm_example
<b>Recordset Name -</b> Header,Item,Trailer
<b>Recordset Namespace -</b> http://sandeep/xi/bpm_example
<b>Record Structure -</b> Header,,Item,,Trailer,*
<b>Recordset Sequence -</b> Ascending
<b>Key Field Name -</b> Record Type
<b>Key Field Type -</b> String(Case Sensitive)
<b>Header.fieldFixedLengths</b> 3,4,15,20,15,15,20,10
<b>Header.fieldNames</b> RecordType,RecordLength,CompanyName,CompanyAddress,BankName,BankCode,BankAddress,AccountNumber
<b>Header.processFieldNames</b> fromConfiguration
<b>Header.keyFieldValue</b> 01
<b>Header.lastFieldsOptional</b> YES
<b>Item.fieldFixedLengths</b> 3,4,15,20,15,15,15,10,6,10
<b>Item.fieldNames</b> RecordType,RecordLength,BeneficiaryName,BeneficiaryAddress,BankName,BankCode,BankAddress,AccountNumber,Amount,NoteToPayee
<b>Item.processFieldNames</b> fromConfiguration
<b>Item.keyFieldValue</b> 02
<b>Item.lastFieldsOptional</b> YES
<b>Trailer.fieldFixedLengths</b> 3,4,6,6
<b>Trailer.fieldNames</b> RecordType,RecordLength,TotalRecords,TotalAmount
<b>Trailer.processFieldNames</b> fromConfiguration
<b>Trailer.keyFieldValue</b> 03
<b>Trailer.lastFieldsOptional</b> YES
If I don't give these parameters then channel will give me errors.I don't know what other parameter to give to create a file.
I had tried the same thing with the following and it worked
<b>Document Name -</b> SampleMessageType
<b>Document Namespace -</b> http://sandeep/xi/bpm_example
<b>Record Structure -</b> Substr,*
<b>Recordset Sequence -</b> Ascending
<b>Key Field Name -</b> Record Type
<b>Key Field Type -</b> String(Case Sensitive)
<b>Substr.fieldFixedLengths</b> 3,4,15,20,15,15,20,10,3,4,15,20,15,15,15,10,6,10,3,4,6,6
<b>Substr.fieldNames</b> RecordType,RecordLength,CompanyName,CompanyAddress,BankName,BankCode,BankAddress,AccountNumber,RecordType,RecordLength,BeneficiaryName,BeneficiaryAddress,BankName,BankCode,BankAddress,AccountNumber,Amount,NoteToPayee,RecordType,RecordLength,TotalRecords,TotalAmount
<b>Substr.processFieldNames</b> fromConfiguration
<b>Substr.keyFieldValue</b> 01
<b>Substr.lastFieldsOptional</b> YES
But the problem here is my mapping has the Header,Item and Trailer as the structure names but he XML created here will be like
<?xml version="1.0" encoding="utf-8" ?>
- <ns:SampleMessageType xmlns:ns="http://sandeep/xi/bpm_example">
- <Recordset>
- <Substr>
<RecordType>21</RecordType>
<RecordLength>22</RecordLength>
<CompanyName>Sandeep</CompanyName>
<CompanyAddress>ASKDJKLASD</CompanyAddress>
<BankName>HDFC Bank</BankName>
<BankCode>12342</BankCode>
<BankAddress>asdasd</BankAddress>
<AccountNumber>123569</AccountNumber>
</Substr>
- <Substr>
<RecordType>02</RecordType>
<RecordLength>22</RecordLength>
<CompanyName>Sagar</CompanyName>
<CompanyAddress>23123</CompanyAddress>
<BankName>ICICI</BankName>
<BankCode>4234</BankCode>
<BankAddress>ASDASD 25463</BankAddress>
<AccountNumber>6 12304</AccountNumber>
<RecordType>AS</RecordType>
<RecordLength>DAsd</RecordLength>
</Substr>
- <Substr>
<RecordType>03</RecordType>
<RecordLength>22 1</RecordLength>
</Substr>
</Recordset>
</ns:SampleMessageType>
In this case my mapping fails
Thanks,
Sandeep -
File content conversion in File-to-RFC without BPM
Hi,
I am using FCC for file to RFc scenario.
My input record is in the following format:
Header record
data rec1
data rec2
Trailer record..
The parameters are used in File content conversion:
Recordset Name : Header,item
Recordset Structure: Header,1,item,*
key field name : data1
and in additional parameters:
Header.fieldNames HI,GenDate,Ftype,Fname,Fdate
Header.keyFieldValue Fname
Header.fieldFixedLengths 1,8,1,50,8
Header.endSeparator nl
item.endSeparator nl
item.fieldNames DATA1,DATA2,DATA3,DATA4
item.keyFieldValue item
item.fieldFixedLengths 231,240,241,120
item.lastFieldsOptional YES
Can anyone check whether any parameters are left, b'cos the file is not being read with this settings. and in the C.C its just showing file processing successfully but not able to see the actual file.Hi,
I assume you have header, item and trailer structure in source file.
Source Data Type will be as follows.
RecordSet
--> Header
--> KeyField(Value OH)
--> H1
--> H2
--> Item
--> KeyField (Value OL)
--> I1
--> I2
-->Trailer
--> KeyField (Value OT)
--> T1
--> T2
Where Item Strucutre can come multiple times.
Please use following settings.
Recordset name: RecordSet
RecordSet Structure: Header,1,Item,*,Trailer,1
Key Field Name: KeyField
Header.fieldNames: KeyField,H1,H2
Header.fieldFixedLengths: 2,3,4
Header.processFieldNames: fromConfiguration
Header.keyFieldValue: OH
Header.LastFieldsOptional: YES
Item.fieldNames: KeyField,I1,I2
Item.fieldFixedLengths: 2,5,6
Item.processFieldNames: fromConfiguration
Item.keyFieldValue: OL
Item.LastFieldsOptional: YES
Trailer.fieldNames: KeyField,T1,T2
Trailer.fieldFixedLengths: 2,8,9
Trailer.processFieldNames: fromConfiguration
Trailer.keyFieldValue: OT
Trailer.LastFieldsOptional: YES
Regards,
Gouri -
File content conversion scenario-empty file
Hi all,
I am doing file content conversion for my sender flat file. And I want to generate XML file in my receiver location.When I check with test tab in my message map in IR , no structure gets generated in RESULT.Overalls cenario is working fine and message is processed successfully but empty file is getting generated in target directory.When I check the payload in message content in RWB communication channel monitoring,it's picking data correctly from the file.I am not getting what might have gone wrong with my message mapping in IR. It's not showing any syntax error.Even it's not generating target message structure in Results window of test Messsage mapping.Could you suggest what mistake might be there in message mapping.Hi all,
I am getting this message in message monitor(SXMB_MONI).
com.sap.aii.utilxi.misc.api.BaseRuntimeException
thrown during application mapping
com/sap/xi/tf/_MM_Flat_content_conv_:
RuntimeException in Message-Mapping transformatio~
I am able to see the output structure in test window of message mapping in IR and communication channel monitoring is also showing successful message.
fcc parameters used are:
Header.fieldNames KEY,EMPID,NAME,COMPANY,PHONE
Header.fieldFixedLengths 1,4,20,15,12
Header.processConfiguration FromConfiguratiion
Header.keyFieldValue H
Detail.fieldNames KEY,COMPANY,LOCATION
Detail.fieldFixedLengths 1,15,10
Detail.processConfiguration FromConfiguratiion
Detail.keyFieldValue D
Please suggest the mistake in mapping
Edited by: Jaya on Mar 3, 2010 12:45 PM
Edited by: Jaya on Mar 3, 2010 12:47 PM -
File Content Conversion - Key Field Value
Hi Experts,
I am using File to Idoc scenario for my mapping. In the receiver Communication channel, I am using File Content Conversion. My scenario is as follows :
I have a recordset with Header and Line items with Key Field Indicator as 'H' and 'L'. In some cases, the value for this Key Field is coming in as something other than 'H' and 'L'. I need to throw an exception when this Key Field is not 'H' or 'L'.
In the 'Content Conversion' tab, my attributes are as:
Header_Structure.keyFieldValue = 'H' and Line_Structure.keyFieldValue = 'L'. Is there any more attributes that I need to add ?
Please advise. Thanks a lot.
Regards,
Freddy.>>multiple key field values in FCC configuration i.e Line_Structure.keyFieldValue = H or L
AFAIK it is not possible but lets wait for other experts to comment on this...
>>Can keyFieldInStructure (add, ignore) parameter help me in this case ?
No. this parameter is only used when you want to include key filed in ur XML structure(add) or not (ignore)...
Chk this:
http://help.sap.com/saphelp_nw70ehp1/helpdata/en/2c/181077dd7d6b4ea6a8029b20bf7e55/content.htm -
File Content Conversion doesn't pull file
Hi all,
I have a Comm Channel using File Content Conversion - it does not pick up the file (no message in msg monitor). If I copy the Comm Channel, turn off File Content Conversion, and change the Sender Agreement to use the copied Comm Channel, the file is picked up and a message appears in the message monitor.
Any ideas? Does File Content Conversion expect certain file names/types/etc...?
Also, side question - when I change the sender agreement (or anything else in the CD), SXI_CACHE shows "Unable to refresh cache contents" with various errors, one of them being "LCR_GET_OWN_BUSINESS_SYSTEM - NO_BUSINESS_SYSTEM"; another said something about IF_HTTP_.. HTTP Communication error or something.
I'll do more searching on this on and post a new topic if necessary...
Thanks,
BrianI'll try setting those logging settings (don't have access).
In the meantime, here is my content conversion:
Content Conversion info - converting a 3 line type flat file to XML
Example of file layout:
H060412
IC11030416 Example yada yada EA 110137
IC11030417 Example yada yada EA 131206
T000002
>First letter is key field RecType (H=header, I=detail, T=trailer)
Doc name: Material <--msg type
Doc ns: urn:......
Doc offset: <blank>
RS name: Material <--data type
RS ns: <blank>
RS struc: Hdr,1,Dtl,*,Trl,1
RS seq: ascending
RS/msg: 1
Key field: RecType
Key type: String case-sensitive
Hdr.fieldFixedLengths 1,6
Hdr.endSeparator 'nl'
Hdr.fieldNames RecType,GteamsDate
Hdr.keyFieldValue H
Dtl.fieldFixedLengths 1,1,18,20,4,6
Dtl.endSeparator 'nl'
Dtl.fieldNames RecType,ActivityInd,CatalogNum,Description,UOM,ProductClass
Dtl.keyFieldValue I
Trl.fieldFixedLengths 1,6
Trl.endSeparator 'nl'
Trl.fieldNames RecType,RecCount
Trl.keyFieldValue T
Brian -
File Content Conversion ignore fields
HI ,
I need to ignore some rows in the middle of the data in File content conversion for exaple
H1,Field1,Field2,Field3
A,GB07,MICHEL,1000
H2,Field3,Field4,Field5
B,GB08,andrew,2000
The above is the sample text file from the source , I need to parse in the below
RECORDset1
<Field1>A</Field1>
<Field2>MICHEL</Field2>
<Field3>100</Field4>
RecrodSet2
<Field4>A</Field4>
<Field5>andrew</Field5>
<Field6>200</Field6>
I need to omit or ignore the H1 and H2 rows from the File Content conversion.,
Please guide me how to achive this using File Content conversionHi Krishna,
In case if H1 and H2 is your record type or line type then to ignore line for this type... just do not handle "keyFieldValue" in the content conversion for H1 and H2 record type.
Thanks,
Binod
Maybe you are looking for
-
Save as Plug-in dialog box doesn't allow me to select anything but "Finder"
I'm trying to make a folder action that takes any images and imports them to iPhoto. Automator isn't letting me save my script as as anything but a Finder plug-in. Is this normal?
-
Elements 12 Organizer unable to preview .mts video files
I am using Adobe Photoshop Elements 12 and Premiere Elements 12 on Windows 8.1. I have the newest version of Apple QuickTime (7.7.6) installed. I import .mts video files from my Panasonic Lumix DMC-GF1 for organizing along my still photos. I am absol
-
Ipod screen wont turn off when recharging
I have an 80Gig Ipod Video. Right now I am charging it via USB on my computer and the screen does not turn off. Is there something wrong with the Ipod? Can someone help me? Ive read the other threads about holding down the Menu and select button and
-
Question : Different planning strategies in SAP PP
Hi PP gurus , Help me in understanding purpose with suitable example different planning strategies say Strategy 10 , 11 , 20 , 30 , 26 , 40 and 50 . Find below an example for which how the above said strategies will act wrt . Ex : You have Unrestr
-
Dynamic Page Title from Spry Dataset
Is it possible to create the title tag content dynamically from the dataset? I tried placing the title tag after the creation of the dataset and put this in, but it doesn't seem to work: <title>Open Orders for {dsCustomer::custname}</title> Simon