File(FTP) Adapter doesn't pick any file from FTP server
Hi All,
This is a strange problem. I am trying to pick all the file from a FTP server using File Name: . . But the file adapter doesn't pick any file from the directory. When I change it to a specific file name eg. ABC.txt then it picks up the file ABC.txt only.
My requirement is to pick up all files in the directory and I just do not seem to understand what is wrong. I have used this wildcard option several times earlier and it always worked fine. But in this case, this does not work.
I changed the FTP server to point to an internal FTP server and it works fine.
I have checked all my parameters and everything looks okay. Like I mentioned earlier, if you specify exact file name, it picks up the file.
Any guess as to what is going on here?
Transport Protocol: FTP
Message Protocol: File
source directory: /test or test ( <b>either one works</b>)
file name: * or . or *.txt <b>nothing works</b>
server: ftp server name
port: 21
data connection: passive
user: ******
pass: ******
connect mode: permanently
transfer mode: text
QOS: exactly once
poll: 10 secs
processing mode: archive ( <b>changed to test and delete as well, but made no difference</b>.)
archive dir: dir path
file type: text
adapter specific attributes:
checked: set adapter specific attributes
and file name.
status: active.
Similar Messages
-
XI Adapter Engine Not picking the data from FTP Server ?t
Hi All
We have upgraded oracle in our landscape
from 10.0.2.0.2 to 10.2.0.4.0
we have Redwood System , which runs the interfaces
Redwood initiates Our Satellite XI system to pick the data from the ftp server
but after the upgrade , it is not able to pick the data from the ftp server .
when checked in the Satellite XI Adapter engine getting following error
"XI Engine Error occurred while connecting to the ftp server java.net.socketException:Connection Reset"
but we are able to ftp from Satellite XI Adapter engine to ftp system manually but why Satellite XI Adapter engine is not the
picking the file (ie data) from the ftp server.
Immediate Response is highly appreciated
Regards
Edited by: sidharthmellam on Nov 23, 2009 11:54 AMHi Sidharth,
Please give me the FTP connection parameters mentioned in the channel.
Did you try stopping and starting the channel ?
If not please stop and start the channel.
Also catch the default trace and paste it.
Cheers...,
Raghu. -
Have installed, uninstalled and reinstalled Thunderbird, no change. Am going by the how-to article that says "In order to import messages from Outlook to Thunderbird, Outlook must be the default mail client."
After all this, I will have to move the files from a Windows 7 machine to a new Windows 8 machine which will not have any Office programs on it.https://support.mozilla.org/en-US/questions/1031812
-
Thunderbird doesn't pick up mail from Cox server
I just reinstalled Thunderbird after my computer (Windows 7) was wiped. I backed it up first, and I can see my email and address book. I can send mail, but I can't receive it, although I can see mail in my webmail at Cox. Thanks in advance. (It's possible that someone posted an answer to a previous, more vague, query, but I'm unable to access some older messages.)
Your provider should be able to provide you with the correct settings so you can see if you need to change anything.
If you want someone here to look at your settings you would have to post them. No one can guess what you have now.
From the Help menu select Troubleshooting Info, '''clear the box to Include Account Names.'''
Press Copy to Clipboard and come back and paste that info into a reply window. -
B2B adapter is not polling any data from EDI X12 810 ECS file
Hi All,
I am new to Oracle B2B. I am using
Jdev 11.1.1.6
Oracle Editor : 7.0.5.4016
Document Protocol : EDI_X12
Document type : 810 (Invoice )
Version: 4010
Weblogic server :11.1.1.6.0
Requirement is : i had an EDI file and i need to translate the EDI map using the B2B adapter, transport to SOA Suite and insert into a custom DB.
Issue is : B2B adapter is not polling any data from EDI X12 810 ECS file
for this i created sample EDI X12 810 ecs file, i converted the same to .xsd and .dat file. I created partner, and while configuring channel i used '*Generic File 1.0*' protocol and i given folder path( i also checked, by just giving folder Name) in the folder name property of 'Transport Protocol Parameters' , i also placed sample xml file into this folder. And I created sample process in Jdev to poll data from this folder.
build and deployment is fine for this process, but no instances is created for this process. and the Process is not Polling any data from the folder which i mentioned in the Transport Protocol Parameters.
is this the way am doing is wrong for my current requirement or am i did any wrong step (as stated above ) ? Please help me. How can i receive data from this EDI file to my bpel process so that i can continue with the rest of the Process. Thank you in advance
Edited by: 979032 on Feb 12, 2013 11:02 PM
Edited by: 979032 on Feb 13, 2013 12:14 AMHi Anuj ,
I placed .dat file now. The file Picked by B2B adapter. But i was getting the Error. The error i found in Business Message as
"Error Code B2B-50547
Error Description Machine Info: (soabpm-vm) Description: Agreement not found for trading partners: FromTP null, ToTP MyCompany with document type 810-3070-INBOUND.
Error Level ERROR_LEVEL_COLLABORATION
Error Severity ERROR
Error Text Agreement not found for trading partners: FromTP null, ToTP MyCompany with document type 810-3070-INBOUND. "
But i created agreement for the partner and my document type name is "NewDocumentType" and in the wire message a am getting as shown below
Id 7F00000113CFC36785C0000017D7E2B0
Message Id 7F00000113CFC36785C0000017D7E2B0
Business Message 7F00000113CFC367A450000017D7E2B7
Packed Message Packed Message
Payload Payload
Protocol Message Id EDIX12810.dat@7F00000113CFC36799B0000017D7E2B4
Refer To Protocol Message Id
Protocol Collaboration Id
Protocol Transport Binding filename=EDIX12810.dat filesize=2289 ChannelName=MyCompany_ListeningChannel file_ext=dat fullpath=/home/oracle/Desktop/B2BFiles/EDIX12810.dat timestamp=2013-02-21T01:58:21.000-08:00 MSG_RECEIVED_TIME=Thu Feb 21 02:04:53 PST 2013
Message Digest Message Digest
Digest Algorithm
Transport Protocol File
Transport Protocol Version 1.0
Url file://localhost//home/oracle/Desktop/B2BFiles/
security
Transport Headers filename=EDIX12810.dat filesize=2289 ChannelName=MyCompany_ListeningChannel file_ext=dat fullpath=/home/oracle/Desktop/B2BFiles/EDIX12810.dat timestamp=2013-02-21T01:58:21.000-08:00 MSG_RECEIVED_TIME=Thu Feb 21 02:04:53 PST 2013
certificates certificates
State ERROR
Reattempt Count
Error Code
Error Description
Error Text
exchangeRetryInterval
exchangeRemainingRetry
Message Size 2289
I also has one more doubt, now i created ecs,xsd and .dat by selecting sample EDI file in Document editor. suppose i want create the same ecs ,.xsd and .dat for my gentran file which is of EDI x12 810 standard but i have it in PDF format , then how can i access that to in Document editor ( in the import option, i found Gentran DDF and Gentran Unix IG and i was getting the following error while importing my PDF file
ErrorCode : 0xC00CE508
File Position : 10
Line Number : 2
LineByte Position :2
Reason: An invalid character was found in text content error) so that i can create .dat file and i can place the same in my folder in order to pick the file.
Please help us . Thank you .
Regards,
Kotresh
Edited by: 979032 on Feb 21, 2013 2:17 AM -
ESB- FTP adapter unable to poll a file
I have a FTP adapter it has to poll files, with diff naming convention.(like "asd", 'wer',"jkl","AVC"). But the adapter was unable to poll a file which name start with AVC
reamining files are polled successfully.At ftp location ftp adapter will poll file and place all records into DB through ESB,for ESB we can set adapters as inbound.Plz give me any suggessions to solve this problem(10.1.3.4).Thq.I checked the error logs and it informed it was not able to create the stage directory where as i am only creating the stage directory and providing the path to it.so i could not really understand the exact error.
Does a stage directory get created automatically anywhere else? -
Sener file adapter has read/pick the files first in first out method.
HI
In my Interface I am Using Sender as File adapter. As per my requirement Sender file adapter has to read the file from file directory. This directory having 1000u2019s of files with some files are same name (time stamp is different) and some files are different name here file adapter has to pick the file with mentioned name in File sender adapter like ZMPSMSGSTATUSMST-.xml .
But source file name is like <TABLENAME>-<TIME_STAMP>.XML (ZMPSWRKFLOWHIST-20090527-150522-628) in file directory.
The file adapter in XI will poll to this directory and picks the file in first- in first-out by sorting according to timestamp.
To do this configuration what I have to do in sender file adapter please give me your valuable inputs.HI Abhi,
Thank you for your spot replay.
I tested now but i am geting below error.
Putting message into send queue failed, due to: com.sap.aii.af.ra.ms.api.DuplicateMessageException: Message ID f4ca4f86-9c5d-4bdd-1fb1-a6bd7cda99a8(OUTBOUND) already exists in database: com.sap.sql.DuplicateKeyException: [NWMss][SQLServer JDBC Driver][SQLServer]Violation of PRIMARY KEY constraint 'PK__XI_AF_MSG__491A1D0B'. Cannot insert duplicate key in object 'dbo.XI_AF_MSG'..
Could not archive file 'E:\file\in\ZMPSMSGSTATUSMST-20090527-150522-628.xml' after processing
but i am able to see this file in Archive foleder. once file is archivied sucessfully the same file is delted from source directory?
I given processing parametes queue name is TEST.
Thanks
srinivas
Edited by: srinivasreddy p on May 28, 2009 8:43 AM
Edited by: srinivasreddy p on May 28, 2009 8:52 AM -
FTP Adapter Configuration For End Of File
Hi Team,
i'm doing DB polling and writing that contents to on file using FTP Adapter, DB poller will poll each line @ a time and writes to remote Server
in my FTP adapter usage, after writing the whole contents which i pass from my bpel,
i need to use some hardcoded values at the end of the file
Eg.
test1|test2|test3|test4
test1|test2|test3|test4
test1|test2|test3|test4
test1|test2|test3|test4
@@Thanks@@
Like shown above after writing some contents
i need to add @@Thanks@@ then one ENTER
Thanks in advanceOk, now I'm understanding you are using "Append existing file" option checked... The approach won't work with appending on...
If you know when it is the end of the file you can do something like this...
At the first line file will be like this...
line1|line1
Second line...
line1|line1
line2|line2
When you receive the third line and you know that's the last line you write firstly this...
line1|line1
line2|line2
line3|line3
And then you write the @@Thanks@@ at the end using a different translation schema... Possibly a different FTP Adapter writing on the same file...
line1|line1
line2|line2
line3|line3
@@Thanks@@
However, if you don't know when you are receiving the last line and/or you need the @@Thanks@@ always there it won't work with append option... You'll possibly need a sync read FTP adapter to read the file and rewrite it again at every iteration...
Cheers,
Vlad -
I'm a photographer with tons on images on dvd and my dvd drive now doesn't recognize any files on any of my dvd's. Help!!!
After 3 trips to the Apple store this week, the issue is still unresolved. The photo dvd's open just fine on Snow Leopard, but are not recognized at all on Lion. I'm guessing since the DVD's were originally burned on a PC, they will no longer work. After finding out that PowerPC is no longer recognized by Lion and I can no longer use Nikon NX2 (Photo editing software), I will be re-installing Snow Leopard. According to the Apple store in Lancaster, Pa. there is no refund available for my Lion purchase. I have a ton of photo DVD's, most of which will not open since I've only recently switched to an IMAC system. It has made me think about returning to the PC world. I'm VERY unhappy with these developments and I really need to re-think my computer situation. I don't do much else besides photography. My purchases and time spent with my IMAC has aparently been a great waste.
-
I just bought Quicktime MPEG - 2 to play MPG video files and still doesn't work. any suggestion?
Please note:
If your Mac has OS X Lion, MPEG-2 functionality is built in and the QuickTime MPEG-2 Playback Component is unnecessary.
QuickTime MPEG-2 Playback Component for Mac OS X - Apple Store (U.S.) -
FILE SENDER ADAPTER - TO GET A DINAMIC FILE NAME IN THE DIRECTORY
Hi,
Please help me.
I have to read by a file sender adapter a specific file in the directory that its name is Dyyyymmdd, where yyyymmdd is variable according with the current day:
D - fixed letter
yymmdd - year,month and day of the current day.
I cant´t use D* in the File Name Scheme because I must read only the one file generated in the day.
How can I configure my file sender adapter to read this especific file in the directory?
Thanks in advance.
Mider.Hi Krishna,
I must access only one file by time ( of the current day ), but in the directory I have a lot of them of different dates. I mean, in the of the read ( in the adapter configuration ) , I need to configure the name of the file Dyyyymmdd before of the reading in the directory, in other words, I need to construct the name of file (withe the current date) before the communication channel access the file to read it.
I think that OS command just can be applicated in file receivers, but if possible, at your purpose, how can I access the name of this especific file via OS command for senders?
Thanks,
Mider.
Message was edited by: Midervilson Andrade
Message was edited by: Midervilson Andrade -
JMS sender adapter is not picking up message from MQ
Hi Experts,
I have configured the JMS sender adapter for getting message from Websphere MQ. In RWB the adapter and the communicaiton channel all looking good. The trace file tells me the connection to the queue has been established.
But the problem is this JMS sender adapter is not picking up message from the Queue defined on the MQ site.
Any Idea what could be wrong?
Thanks!
Jason
JasonHi,
1) Can you activate the JMS adapter again ( edit save and activate it )
2) Check whether the right Queue is addressed.
Regards
Agasthuri Doss -
IPhoto 9.6 doesn´t display any pictures from library, upgraded
iPhoto 9.6 doesn´t display any pictures from library. I have upgraded from an old iPhoto. I upgraded the Library also.
Everything is inside the Library I can see but when I run iPhoto I get only a yellow note on the screen and no pictures?Everything is inside the Library I can see
Do you mean by looking into the library using the Finder?
but when I run iPhoto I get only a yellow note on the screen and no pictures?
Then iPhoto has probably opened a new, empty library, because it could not find or access your iPhoto library. What happens, whiny double-click the Library to open it directly?
Where is your iPhoto library stored? Is it in the Pictures folder or on an external drive? -
My photoshop cc doesn't have any presets. from where can i download them?
my photoshop cc doesn't have any presets. from where can i download them?
The default Photoshop installation does include a LOT of presets in the application directory (in a folder named "Presets").
If that folder is missing, you may need to restore it from backup, or reinstall Photoshop. -
Sender file adapter is not picking the file from windows server
Hi Experts,
We have a sender file adapter running on Unix server. Now we have changed the source directory path from Unix to Windows in file access parameters. It is not picking the files from windows directory and not showing any error.
In this scenario, input file for sender adapter is *.xml and no content conversion.
Could any one please let me know is there anything needs to changed in file adapter.
Thanks in advance,
Sridhar. MSridhar,
What do you have in the directory path?
If it is a shared drive in unix then the directory in windows should also be a shared drive from XI system. Else if it is FTP check the address.
Regards,
---Satish
Maybe you are looking for
-
Shared Workspace Tags - Feature Request
A fellow Acrobat.com user brought up a great feature request, shared tags. Currently when you tag a document within a shared workspace, only you can see those tags. Others with access to the shared workspace do not have the ability to see the tags
-
Subcontracting scrap, component consumption and service cost booked to vendor
Hi, Our client is issuing 100 pieces of component "A" to subcontracting vendor to manufacture finished product "B". In MIGO, we are receiving finished product B and consumption is booked for 100 pieces of component A . Invoice is paid to the subcontr
-
Help with JFormattedTextField/MaskFormatter
Hi, I am trying to use a MaskFormatter on a JFormattedTextField. However, when I turn OverwriteMode off, I can not enter any input into my text field. Below is my simple code: public class temp { public temp() { super(); // TODO Auto-generated constr
-
Random Login/Startup Error
the following pops up right after reboot/start up SIMBL Error "SystemUIServer 1.5.4 (v248.1) has not been tested with the plugin WiFind WiFind 1.4.2 (v1.4.2). As a precaution, it has not been loaded." I have no idea what this is, and I never installe
-
How many people think Verizon is GOOD at "customer service" - or is that an oxymoron?
Back when Comcast's customer service was reported to be HORRIBLE (okay, it sounds like many think it still is), one frustrated but motivated customer created this website: www.comcastmustdie.com. (For real! YOU CAN STILL GO THERE - CHECK IT OUT! Th