File GPP preference item fails path not found

Hi,
I have a GPP preference item, for a file, to copy it from a file share to C:\ on my servers.
The computer 'SetACL.exe' preference item in the 'Base Tools {0CC263CF-2996-40A5-8690-9C8E7A2314C5}' Group Policy Object did not apply because it failed with error code '0x80070003 The system cannot find the path specified.' This error was suppressed.
However, the file sits on a share at H:\BASETOOLS\, on both domain controllers and the member server in question. However, despite being able to browse to the file and domain computers and the computer account for the member server having permission to the
share, I get the error above.
Is it due to the fact that the drive mapping is done via another gpo and maybe the file is attempting to be accessed by this gpo before the mapping of the drive? Can I influence this order?
Thanks

> However, the file sits on a share at H:\BASETOOLS\, on both domain
> controllers and the member server in question. However, despite being
> able to browse to the file and domain computers and the computer account
> for the member server having permission to the share, I get the error above.
Computer or user configuration? If computer configuration, you MUST use
an UNC path...
> Is it due to the fact that the drive mapping is done via another gpo and
> maybe the file is attempting to be accessed by this gpo before the
> mapping of the drive? Can I influence this order?
Processing order of CSEs:
http://www.gruppenrichtlinien.de/artikel/client-side-extensions-cses/
Drive Maps is #15, Files is #18. Your issue is the above - use an UNC
path and you'll be fine.
You cannot influence this order. Ok, to be honest, you can - but this
will severely break other things...
Martin
Mal ein
GUTES Buch über GPOs lesen?
NO THEY ARE NOT EVIL, if you know what you are doing:
Good or bad GPOs?
And if IT bothers me - coke bottle design refreshment :))

Similar Messages

Discovery Box service is getting Failed - Path not found error

Hi,
when i am starting the discovery box SAP services from management console it is getting failed. The trace error is
Starting WebService thread
SapSSLInit failed => https support disabled
Webservice named pipe thread started, listening on port
.\pipe\sapcontrol_00
Webservice thread started, listening on port 50013
IWDFVM2160\erpadm is starting R/3 System at 2008/03/17 12:39:39
SAP-R/3-Startup Program
Starting at 2008/03/17 12:39:39
Startup Profile: "D:\usr\sap\ERP\SYS\profile\START_SCS00_iwdfvm2160"
Starting Programs
*(828) CreateProcess(D:\usr\ERP\SYS\exe\uc\NTI386\sapcpe.EXE) failed(3). ERROR_PATH_NOT_FOUND: The system cannot find the path specified. *
(5016) CreateProcess: D:\usr\sap\ERP\SCS00\exe\msg_server.EXE pf=D:\usr\ERP\SYS\profile\ERP_SCS00_iwdfvm2160
(5024) CreateProcess: D:\usr\sap\ERP\SCS00\exe\enserver.EXE pf=D:\usr\ERP\SYS\profile\ERP_SCS00_iwdfvm2160
Here it shows the path "D:\usr\ERP\SYS\exe\uc\NTI386\sapcpe.EXE" and it should be " D:\usr\SAP\ERP\SYS\exe\uc\NTI386\sapcpe.EXE"
Please advice - how to change this
Thanks in advance
Regards
-Siva

Hi,
Please ensure that the navigational attribute is checked at the attribute level and also at the Infocube level and also check that correct mapping of this navigational attribute is done at the Multiprovider level.
Thanks,
Venkat

Instalation fail : Path not Found

Linux DBA-Debian 2.4.27-2-386 #1 Mon May 16 16:47:51 JST 2005 i686 GNU/Linux
# dpkg --install oracle-xe-client_10.2.0.1-1.0_i386.deb
(Reading database ... 118210 files and directories currently installed.)
Preparing to replace oracle-xe-client 10.2.0.1-1.0 (using
oracle-xe-client_10.2.0.1-1.0_i386.deb) ...
Unpacking replacement oracle-xe-client ...
Setting up oracle-xe-client (10.2.0.1-1.0) ...
Executing Post-install steps..........
chmod: cannot access
`/usr/lib/oracle/xe/app/oracle/product/10.2.0/client/bin/sqlplus': No such file
or directory
cat:
/usr/lib/oracle/xe/app/oracle/product/10.2.0/client/scripts/oraclexe-client-merg
e.menu: No such file or directory
# ls -l /usr/lib/oracle/xe/app/oracle/product
total 4
drwxr-xr-x 2 oracle dba 4096 Sep 25 11:08 10.2.0
# ls -l /usr/lib/oracle/xe/app/oracle/product/10.2.0/
total 0

Ibfacts,
thanks for your reply. First let me ask this Q, I got this catalog file and repository from PRD people and I just placed them accordingly in my local macine. Configured NSconfig file and Insanceconfig.xml file. Are there any other configurations needed to work as expected? Please let me know
Thanks
newbie

Loading jperflib failed. jperflib (Not found in java.library.path)

Please:
We are working with SAP Netweaver EHP1 7.0, Red Hat Enterprise Linux 5, Oracle 10g,
SAP Application Server JAVA/Oracle, Central System
Java versión installed IBMJava2-amd64-142
java -version
java version "1.4.2"
Java(TM) 2 Runtime Environment, Standard Edition (build 2.3)
IBM J9 VM (build 2.3, J2RE 1.4.2 IBM J9 2.3 Linux amd64-64 j9vmxa64142ifx-20100916a (JIT enabled)
J9VM - 20100914_64612_LHdSMr
JIT - 20090210_1447ifx2_r8
GC   - 200902_24)
step 23 de 37: Configure UME:
Message error:
INFO 2010-11-19 20:04:41.532
Output of /opt/IBMJava2-amd64-142/bin/java -classpath /tmp/sapinst_instdir/NW701/AS-JAVA/ORA/
CENTRAL/install/sharedlib/launcher.jar -Xmx256m com.sap.engine.offline.OfflineToolStart com.s
ap.engine.configtool.batch.BatchConfig /usr/sap/BJD/SYS/global/security/lib/tools/iaik_jce.ja
r:/usr/sap/BJD/SYS/global/security/lib/tools/iaik_jsse.jar:/usr/sap/BJD/SYS/global/security/l
ib/tools/iaik_smime.jar:/usr/sap/BJD/SYS/global/security/lib/tools/iaik_ssl.jar:/usr/sap/BJD/
SYS/global/security/lib/tools/w3c_http.jar:/tmp/sapinst_instdir/NW701/AS-JAVA/ORA/CENTRAL/ins
tall/lib:/tmp/sapinst_instdir/NW701/AS-JAVA/ORA/CENTRAL/install/sharedlib:/oracle/client/10x_
64/instantclient/ojdbc14.jar /tmp/sapinst_instdir/NW701/AS-JAVA/ORA/CENTRAL/BatchConfig.xml i
s written to the logfile batchconfig.log.
WARNING 2010-11-19 20:04:43.908
Execution of the command "/opt/IBMJava2-amd64-142/bin/java -classpath /tmp/sapinst_instdir/NW
701/AS-JAVA/ORA/CENTRAL/install/sharedlib/launcher.jar -Xmx256m com.sap.engine.offline.Offlin
eToolStart com.sap.engine.configtool.batch.BatchConfig /usr/sap/BJD/SYS/global/security/lib/t
ools/iaik_jce.jar:/usr/sap/BJD/SYS/global/security/lib/tools/iaik_jsse.jar:/usr/sap/BJD/SYS/g
lobal/security/lib/tools/iaik_smime.jar:/usr/sap/BJD/SYS/global/security/lib/tools/iaik_ssl.j
ar:/usr/sap/BJD/SYS/global/security/lib/tools/w3c_http.jar:/tmp/sapinst_instdir/NW701/AS-JAVA
/ORA/CENTRAL/install/lib:/tmp/sapinst_instdir/NW701/AS-JAVA/ORA/CENTRAL/install/sharedlib:/or
acle/client/10x_64/instantclient/ojdbc14.jar /tmp/sapinst_instdir/NW701/AS-JAVA/ORA/CENTRAL/B
atchConfig.xml" finished with return code 183. Output:
PerfTimes : loadNativeLayer: loading jperflib failed. jperflib (Not found in java.library.pat
h).
hotspot_compiler is missing in cluster_data.
ChangeServicePropsTask has finished successfully. Service: ssl on dispatcher
ChangeManagerPropsTask has finished successfully. Manager: LockingManager on dispatcher
ChangeManagerPropsTask has finished successfully. Manager: ClusterManager on dispatcher
Error occurred while working with Configuration.
WARNING[E] 2010-11-19 20:04:43.909
CJS-30059 Java EE Engine configuration error. DIAGNOSIS: See output of log file batchconfig.
log: '
PerfTimes : loadNativeLayer: loading jperflib failed. jperflib (Not found in java.library.pat
h)
.hotspot_compiler is missing in cluster_data.
ChangeServicePropsTask has finished successfully. Service: ssl on dispatcher
ChangeManagerPropsTask has finished successfully. Manager: LockingManager on dispatcher
ChangeManagerPropsTask has finished successfully. Manager: ClusterManager on dispatcher
Error occurred while working with Configuration. '.
ERROR 2010-11-19 20:04:44.7
FCO-00011 The step runBatchconfig with step key |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_S
ystem|ind|ind|ind|ind|2|0|NW_CI_Instance|ind|ind|ind|ind|11|0|NW_CI_Instance_Configure_Java|i
nd|ind|ind|ind|5|0|runBatchconfig was executed with status ERROR
Thanks for your comments nad suggestion

good afternoon:
the error loading jperflib failed. jperflib (Not found in java.library.path) is fixed,
Solution: LD_LIBRARY_PATH=/sapmnt/SID/exe
but other error appear
/usr/sap/BJD/JC01/j2ee/admin/adminCFG.properties doesn't exist and will be created by batchconfig.
/usr/sap/BJD/JC01/j2ee/admin/cfg/adminCFG.properties doesn't exist and will be created by batchconfig.
/usr/sap/BJD/JC01/j2ee/deploying/dplOptions.options doesn't exist and will be created by batchconfig.
/usr/sap/BJD/JC01/j2ee/configtool/config.properties doesn't exist and will be created by batchconfig.
/usr/sap/BJD/JC01/j2ee/deploying/rdb.properties doesn't exist and will be created by batchconfig.
.hotspot_compiler is missing in cluster_data.
ChangeServicePropsTask has finished successfully. Service: ssl on dispatcher
ChangeManagerPropsTask has finished successfully. Manager: LockingManager on dispatcher
ChangeManagerPropsTask has finished successfully. Manager: ClusterManager on dispatcher
Error occurred while working with Configuration.
com.sap.engine.frame.core.configuration.NameNotFoundException: A property with the name "java.parameters" cannot be found in the PropertySheet "cluster_data/server/cfg/element-info.ID139743".
        at com.sap.engine.core.configuration.impl.addons.PropertyEntryImpl.<init>(PropertyEntryImpl.java:85)
        at com.sap.engine.core.configuration.impl.addons.PropertyEntryImpl.readPropertyEntry(PropertyEntryImpl.java:54)
        at com.sap.engine.core.configuration.impl.addons.PropertySheetImpl.getPropertyEntry(PropertySheetImpl.java:127)
        at com.sap.engine.configtool.batch.task.ElementInfoTask.setElementInfoProperties(ElementInfoTask.java:243)
        at com.sap.engine.configtool.batch.task.ElementInfoTask.go(ElementInfoTask.java:184)
        at com.sap.engine.configtool.batch.BatchConfig.go(BatchConfig.java:60)
        at com.sap.engine.configtool.batch.BatchConfig.main(BatchConfig.java:98)
        at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
        at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:88)
        at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:61)
        at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:60)
        at java.lang.reflect.Method.invoke(Method.java:391)
        at com.sap.engine.offline.OfflineToolStart.main(OfflineToolStart.java:81)

A desktop is failing to join in Domain over a VSAT link. Error: Network path not found.

Dear Friends,
Facing an issue for adding a desktop in Domain over VSAT. When I say enter after typing the domain name which i want to join. I am asked for User name and Password. After User name and password is entered it waits for a long
time and then it gives an error as Network Path not Found. I am pretty surprised why is it happening like that.
In hosts file too I am mentioning the IP of the DC at my Data Center.
I have another site over VSAT which has worst latency and more RTO's than this one, but on that site I am able to add a desktop in Domain. I don't have domain controller at the remote site which is connected by VSAT.

Please do not hardcode the domain IP address in your HOSTS file. That will just create issues.
Please make sure that your client computer points only to internal DNS servers for DNS resolutions.
You can use NSlookup to make sure that DNS resolution for your DCs A and SRV records are working properly:
http://social.technet.microsoft.com/wiki/contents/articles/29184.nslookup-for-beginners.aspx
https://support.microsoft.com/en-us/kb/241515?wa=wsignin1.0
Also, make sure that you have no connectivity failures between your remote site and the one having your DCs using
ping: http://social.technet.microsoft.com/wiki/contents/articles/30110.ping-for-beginners.aspx
This posting is provided AS IS with no warranties or guarantees , and confers no rights.
Ahmed MALEK
My Website Link
My Linkedin Profile
My MVP Profile

Style library files give Path Not Found in Process Monitor (sysinternals)

Hello,
i have a question, i am using Process Monitor to diagnose SharePoint performance issues.
I am getting a lot of the following types of messages
11:27:54.3064738 w3wp.exe
3160 CreateFile
C:\INETPUB\WWWROOT\WSS\VIRTUALDIRECTORIES\{site}443\SITES\{SC}\STYLE LIBRARY\BRANDING\JS\BOOTSTRAP.MIN.JS
PATH NOT FOUND Desired Access: Generic Read, Dis, Options: Sequential Access, No Buffering, Attributes: RE, ShareMode: Read, Write, Delete, AllocationSize: n/a, Impersonating: NT AUTHORITY\IUSR
This only occurs with files stored in SharePoint (Style library/document libraries), i have seen this behavior on multiple servers so it appears to be working by design, does anyone have an explanation as to why this happens? is there also anyway to stop
this happening?
my concern is that this happens on every page load accumulating to a lot of wasted disk reads.
Thanks for your time!
Ben

Hi,
11:27:54.3064738 w3wp.exe
3160 CreateFile
C:\INETPUB\WWWROOT\WSS\VIRTUALDIRECTORIES\{site}443\SITES\{SC}\STYLE LIBRARY\BRANDING\JS\BOOTSTRAP.MIN.JS
PATH NOT FOUND Desired Access: Generic Read, Dis, Options: Sequential Access, No Buffering, Attributes: RE, ShareMode: Read, Write, Delete, AllocationSize: n/a, Impersonating: NT AUTHORITY\IUSR
This bootstrap is usually for the CSS/ SharePoint styling. It may have some code to access this path. While I checked on my environment, it seems I am not seeing this actual path, and from my registry editor as well.
Please have a check if it should have the same path at your environment. If not, I do believe some of the code are directing to the path, and since the path is not available, then the issue may appear.
Thanks,
Wendy
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Wendy Li
TechNet Community Support

The TestStand Engine cannot be initialized. Path not found.

Hi, up until now i installed and removed TestStand 3.5 3 times in a row, just to always get this message (see subject) when i try to start the Sequence Editor. I even uninstalled all NI-Software i had on this laptop to reinstall the whole package... Nothing worked. Now i wonder, is there anything i am doing wrong ? What can i do to get TestStand running ?
Well, on that message when i hit OK, another message
The sequence editor cannot start up. Unable to create the TestStand Engine.
Hitting OK on that message again just terminates the sequence editor leaving me with a blank screen.
Any ideas whats wrong ?
best regards and thanks in advance,
Ingo
Solved!
Go to Solution.

Ingo -
Sorry for your frustration. Your idea to uninstall and reinstall should typically work. The second message is just a result of the first error, so we need to figure out what path is not found, and it is unclear why this is occurring. I tried to force my copy of TestStand 3.5 to fail in a similiar way by messing around with the installation and I could not find a way to cause the "Path not found" error. I got many other more detailed errors, but I have been unable to duplicate your message.
Some questions:
1) What operating system are you using?
2) Are you installing to the default location under Program Files? Are you using a network path in any way?
3) Do you have write authority to the the installation locations on you system?
4) Are you logged in as an administrator when installing, restarting, and launching the sequence editor.
5) Have you manually messed with any of the registry settings under HKEY_LOCAL_MACHINE\SOFTWARE\National Instruments\TestStand\3.5, where something is incorrect?
6) Have you added any User components under the TestStand directory that might somehow load and cause an issue?
If you currently have an installation on the system, you could quickly try to clear out the Cfg directory under TestStand, so that it generates new copies of these files.
Message Edited by Scott Richardson on 11-20-2008 12:38 PM
Scott Richardson
National Instruments

Changing 'Path Not Found ()' error

Hi,
Can anyone point me to where I can change the 'path not found ()' message a user gets when trying to access Dashboards and they have no access to any dashboards ?
I've scanned all the files in the OracleBI\web\msgdb\l_en and I cant find anything ??
can anybody point me in the right direction ?
thanks

As I said before this may happen if the Web Catalog directory had a user account already created with the same name. As you are migrating from a non-SSO setup to an SSO setup it seems that the Presentation Services thinks the SSO accounts are different than the non-SSO accounts and it tries to create a new account. As the directory already exist the creation fails and the user is then not able to read the previous user directory. I am not sure how you going to get around that. You might have to migrate the user folders manually. Perhaps you should raise an SR with Oracle.

"Audio Record Path Not Found" error and new details

I've been having problems opening up older GarageBand files I've created and trying to add new content. When I try to record on an existing track, or in a new track, I get the error: "Audio Record Path not Found! Please enter it in the following dialog." (and there's no following dialog). I've tried to save the file as an archive, which has worked in the past, but doesn't work any longer. I'm using a MacBook Pro Core 2 Duo 15"
As a test, I installed iLife 06 on my older (PowerPC-based) Mac Mini. On that computer, I'm able to open the files, and record onto an existing track. None of my recording equipment is attached to this machine, however. If I save an archive and move it to my macBook Pro, I'm still not able to add recordings to it.
I tried reintalling GarageBand on my MBP, but I still get the same error. I've also deleted the preference files from Library > Preferences. (the two com.apple.garageband... files), and still no luck. It doesn't sound like the audio files themsleves are corrupted since I can open them on the Mini, so it's likely GarageBand. What else can I delete to make it a pristine installation?
I don't want to use my Mac Mini for recording, as it's too slow for my editing needs, but if I can't open the files on my MacBook Pro, I'll have to re-record them.
Anyone have any ideas I can try?

Excellent suggestion! I actually left the files on the external USB drive on which I store them, and accessed them from my MacBook Pro (instead of moving the files to the MacBook Pro), and sure enough, I'm able to edit and add to the files!
I still don't know why I can't access them locally on the MBP, but this workaround is certainly acceptible for my needs!
Thanks out to everyone who helped on this thread!
Brian Ibbott
Coverville.com
The Cover Song Podcast

'Item dependency "CURRENT_YEAR" not found in the EUL' error after 4i to 10g

Hi All,
I have successfully completed a Discoverer 4i to 10g (10.1.2.48.18) upgrade. There is only one EUL (EUL_US) and it has been upgraded to version 5.1.1. All the Workbooks are saved to the File System. However, during testing some of the Workbooks error when I try to open them in 10g - they still open successfully in 4i.
<Dialog Box> Item dependency "CURRENT_YEAR" not found in the EUL
<Dialog Box> Attempt to open Workbook failed
CURRENT_YEAR is a function of custom Package RESEARCH.UDEF which is valid both at a database level and at a Discoverer Admin 10g Register PL/SQL Functions level.
I tried deleting the Function "CURRENT_YEAR" from the 10g Admin Edition Tools -> Register PL/SQL Functions and then importing it again. I received the same Dependency error.
Now the really bizarre thing.....
The Workbook (2MG.DIS) has 2 Worksheets that both have Calculations that reference function CURRENT_YEAR. If I open the Workbook in Discoverer 4i, delete one Worksheet and save as 2MGb.DIS, then reopen the original and save the other Worksheet only as 2MGc.DIS. Both the individual Worksheets open in Discoverer 10g but the combined Workbook still gives the Dependency error. Weird huh?
Any ideas help appreciated as I'm pulling my hair out here (and I need what I've got leftl!).
Kind Regards,
Gary.

Hi all,
The answer was really quite simple but it was what I hadn't included in my post that would have made it impossible for you to help.
I hadn't mentioned that I was initially upgrading from 3i and it all seemed successful. I however was trying to open the Workbooks that had been created in Discoverer 3i directly in Discoverer 10g. That would explain the "bizarre" feature as I detailed in the post. As soon as I save the Workbook in 4i then I can open without issues in Discoverer 10g.
Thanks for viewing my post and for your response Gianluca.
Kind Regards,
Gary.

Configuration file /dbentities/common/bc4j.xcfg is not found in classpath

Hello,
I used database data control and drag & dropped onto the page.If I clean and build & then run its fetching the data but if run project without build then I get the following exception.
Configuration file /dbentities/common/bc4j.xcfg is not found in the classpath.
Error
java.lang.NullPointerException
<MDSBackingStore> <obtainMetadataObject> Exception while getting mutable object
oracle.mds.core.MetadataNotFoundException: MDS-00013: no metadata found for metadata object "/DbEntities/common/bc4j.xcfg"
I used depreceted method for getting BindingContainer as follows
*public BindingContainer getBindings() {*
FacesContext fc = FacesContext.getCurrentInstance();
Application app = fc.getApplication();
*ValueBinding vb = app.createValueBinding("#{bindings}");*
*return (BindingContainer)vb.getValue(fc);*
Edited by: 925410 on Jul 2, 2012 10:36 PM

Hi,
Open your application module ->configuration then click on the link of bc4j.xcfx
when it is open check the path of your bc4j file which will be show on the title bar when u open the bc4j.xcfx file.
match that path and your error path sourly it will not be match .Now open your project from program file ond copy the bc4j.xcfx and past it here(..../dbentities/common/bc4j.xcfg (at same path where it showed in error )) now again reopen your project then do clean and build all after that your problem will b solved.But carefully the path will have to same as show in your log.

Item SI_SHOWDESCONLY was not found in the collection

To give a bit of an overview of the software I'm talking about, we have web applications that integrate crystal reporting (either BOE XI R2 or BOE XI R3.1 depending on the site). The relevant function that these sites perform is to allow the user to schedule a report which invokes the functionality through crystal to create a report scheduled to run at a specified time(s). These entries exist in the History tab of a particular report when viewed in the Central Management Console. This web application references a reporting library (DLL) that contains all the references (11.5.3300.0) to the various CrystalDecisions DLLs used to perform these functions
We have a 2nd piece of software that runs a windows service on an application server which references the same reporting library as the web service. This service essentially cross references entries in our own database with the entries in the crystal database to see if they have processed, or reports back errors, it will "reschedule" a report if it has been deleted.
The issue we are having is that the windows service fails with "Item SI_SHOWDESCONLY was not found in the collection" when calling the following lines of code:
Dim ceScheduleDoc As CrystalDecisions.Enterprise.Desktop.Report
                Dim ceSchedulingInfo As SchedulingInfo
                Dim ceDestinationObjects As InfoObjects
                Dim ceDestinationObject As InfoObject
                Dim ceDestination As Destination
              ceSchedulingInfo.BeginDate = dtTempDate
                    ceScheduleDoc.SchedulingInfo.RightNow = False
                    ceScheduleDoc.SchedulingInfo.Type = CeScheduleType.ceScheduleTypeOnce
                    ceDestinationObjects = ceInfoStore.Query("Select * from CI_SYSTEMOBJECTS Where SI_NAME = 'CrystalEnterprise.DiskUnmanaged'")
                    ceDestinationObject = ceDestinationObjects.Item(1)
                    Dim ceDisk As New DestinationPlugin(ceDestinationObject.PluginInterface)
(if you need to see more of the code that happens in this method, let me know, but it's that sequence that blows up (this forum limits the amount of lines in a post, which is why i'm trying to limit what I display)
I have a theory that the issue is that perhaps the service is trying to invoke a different version of the crystalDecisions.Enterprise.InfoStore reference, despite the fact that the project reference explicitly tells it to use 11.5.3300.0, our GAC does also include 12.0.1100.0 and 12.0.2000.0 and on some servers 10.5.3700.0.
Is there perhaps a binding redirect occuring somewhere that I can find?? I've checked app.config and machine.config

I will run modules utility
but I should mention that the exact same code is run everyday by the web application to schedule reports, and calls those very same lines without issue, it's just when called from the service (on a different server) that it blows up, which is why I'm led to believe that it's an issue with the version of the DLL that it's trying to call
i know in the web.config for the web app, you can explicitly specify that the DLL use certain versions of dlls with tags as follows:
<system.web>
<compilation defaultLanguage="c#" debug="true"><assemblies><add assembly="CrystalDecisions.CrystalReports.Engine, Version=11.5.3300.0, Culture=neutral, PublicKeyToken=692fbea5521e1304"/><add assembly="CrystalDecisions.ReportSource, Version=11.5.3300.0, Culture=neutral, PublicKeyToken=692fbea5521e1304"/><add assembly="CrystalDecisions.Shared, Version=11.5.3300.0, Culture=neutral, PublicKeyToken=692fbea5521e1304"/><add assembly="CrystalDecisions.Web, Version=11.5.3300.0, Culture=neutral, PublicKeyToken=692fbea5521e1304"/><add assembly="CrystalDecisions.ReportAppServer.ClientDoc, Version=11.5.3300.0, Culture=neutral, PublicKeyToken=692fbea5521e1304"/><add assembly="CrystalDecisions.Enterprise.Framework, Version=11.5.3300.0, Culture=neutral, PublicKeyToken=692fbea5521e1304"/><add assembly="CrystalDecisions.Enterprise.InfoStore, Version=11.5.3300.0, Culture=neutral, PublicKeyToken=692fbea5521e1304"/><add assembly="CrystalDecisions.Enterprise.Web, Version=11.5.3300.0, Culture=neutral, PublicKeyToken=692fbea5521e1304"/></assemblies></compilation>
</system.web>
whereas the app.config for my service doesn't quite have that ability...unless it does and I don't know about it??

ERROR: NetExpress 5.0 path Not found - OUAF SDK 4.1 install

I was finally able to install the SDK with all your help but now I am looking at another problem.
In the installation document, after adding Eclipse it says:
Start Eclipse by opening the Oracle Utilities Software Development Kit Client Scripts directory
(Start ? All Programs ? Oracle Utilities Software Development Kit 4.0.0.x ? Oracle Utilities
Software Development Kit Client Scripts) and then double-clicking startEclipse.bat; x is the
build number.
This launches Eclipse with the Welcome tab shown.
When I run the .bat file I get the following error:
ERROR: NetExpress 5.0 path Not found ... at C:\OUAFSDK\SDK\4.0.0.5\Scripts\bin\getBinDirectory.pl line 52.
Nowhere in the install doc does it mention anything about NetExpress.
Any ideas?
Thank you.

Actually I was happy to soon.
After installing Net Express, I don't get that message anymore but nothing at all is happening. Eclipse should be starting according the the install guide. I am starting to wonder how accurate that guide is since quiet a few things are missing already. This is really frustrating.

Bonjour.msi path not found

Bonjour.msi path not found
I am trying to update my itunes to version 10.5.1 but unable to as I keep getting the following error:
The feature that you are trying to use is on a network resource that is unavailable.
Click ok to try again or enter an alternative path to a folder containing the installation package 'Bounjour.msi' in the box below.
This is all new to me and I do not understand what I can do to fix this. I have tried to unistall itunes altogether from my computer but I cannot do this either as the same error message keeps coming up there too.
If anyone can help me I would be most grateful.
Thanks

Unfortunately, this sort of trouble has gotten more complicated to deal with ever since Microsoft pulled the Windows Installer CleanUp utility from their Download Center. First we have to find a copy of the utility.
Let's try Googling. (Best not to use Bing, I think.) Look for a working download site for at least version 3.0 of the Windows Installer CleanUp utility. (The results from mydigitallife and Major Geeks are worth checking.)
After downloading the utility installer file (msicuu2.exe), scan the file for malware, just in case. (I use the free version of Malwarebytes AntiMalware to do single-file scans for that.)
If the file is clean, to install the utility, doubleclick the msicuu2.exe file you've downloaded.
Now run the utility ("Start > All Programs > Windows Install Clean Up"). In the list of programs that appears in CleanUp, select any Bonjour entries and click "Remove".
Quit out of CleanUp. Restart the PC, and try another iTunes install. Does it go through properly this time?

AE: Path not Found error

Hi All
When we create one workflow with one role requested the approval process works, but it does not work when we have one request for 2 roles from 2 different systems. Take note that on their own these roles create a workflow and the approval process works but when they are put together the "Path not found error" appears.
Can anyone please advise on what the problem might be?
Any input would be appreciated!

Rodger,
please have a look at the error log to see exactly what fails.
I suppose that your initiator is limited to role + system, and you do not have defined a path for the second system, so AE does not know how to handle that part of the request.
If you can detail what your initiator looks like, and what the error log says, we may be able to give you more detailed help.
Frank.

File GPP preference item fails path not found

Similar Messages

Maybe you are looking for