File.ico in file.xpm

i would like to convert an icon (file) with extension .ico in an .xpm file.
i use mcnvicon60 to do this, but i've a problem when i write this command:
mcnvicon60 -i toto.ico -p toto.xpm
The system answer that toto.ico is not an windoms_icon; i've tried the options (-d, -c)but it was the same conclusion.
How can i do to convert my file (.ico) ??

>> Need help on ICO in PI 7.4 do we need to create it mandatorily while developing scenarios in PI 7.4
Yes, or you can create Integration flow.
If sender is a SOAP adapter then only you can generate the wsdl.
reg,
avinash M

Similar Messages

Where can I find Icon files (*.ico) for using in forms

Q) Where can I find Icon files (*.ico) for using in forms?
Explaination: I am looking for icons for showing them in my application. Like I have an iconic button for 'Data Entry' option on Vertical Toolbar. Then one icon for Reports and Queries and so on. I need some icons which reflect the heading like for 'Data Entry', I would like a person working on a keyboard. For reports I would like to have a person reading a report or something like that.
Can I find such icons on internet or any specific site?
Pl. guide.
TIA
Tariq

There are thousands and thousands of places on the internet to find .ICO files. Just find one with image and size you want, and use it.
Note that if you are using web-deployed Forms, you will need to convert the .ICO file to .GIF or .JPG for runtime. The Forms Builder still uses .ICO files, though.
Regards,
Robin Zimmermann
Forms Product Management

Ico/gif files

How can i convert an .ico file to a .gif file. Also, is it true
that if i have my application server on unix, i have to have all
the label files as gif files and can not have them as .ico
files. Thanks for your help in advance. - DS
null

I can answer your first question: Use IrfanView. It's a
freeware product available at
http://stud1.tuwien.ac.at/~e9227474/
It can be very useful!
Dinesh Salwan (guest) wrote:
: How can i convert an .ico file to a .gif file. Also, is it true
: that if i have my application server on unix, i have to have
all
: the label files as gif files and can not have them as .ico
: files. Thanks for your help in advance. - DS
null

I am trying to import developed images from LightRoom 5 in o Photoshop 6. I am receiving this message and the images will not open.....'Could not open scratch file because the file is locked, you do not have necessary access permissions or another progra

I am trying to import developed images from LightRoom 5 Photoshop 6 for further editing. I am receiving this message and the images will not open.....'Could not open scratch file because the file is locked, or you do not have necessary access permissions or another program is using the file. Use the 'Properties' command in the Windows Explorer to unlock the file. How do I fix this? I would greatly appreciate it if you would respond with terms and procedures that a computer ignorant user, such as me, will understand. Thanks.

Have you tried restoring the Preferences yet?

Access denied error while writing a file to the file system - myfileupload.saveas() throws system.unauthorizedexception

hi,
as part of my requirement , i have to perform read and write operations of few files [ using the file upload control in my custom visual web part] and on submit button click.
but while writing these files - with the help of fileupload control - and when i use myfileupload.saveas(mylocation);
- i am saving these files into my D:\ drive of my server , where i am executing my code -, am getting access denied error.
it throws system.unauthorizedexception.
i have given full control on that folder where i was trying to store my attached files. and also after following asp.net forums,
i have added iusr group added and performed all those steps such that, the file is saved in my D:\ drive.
but unfortunately that didnt happen.
also
a) i am trying the code with runwithelevatedprivileges(delegate() ) code
b) shared the drive within the d :drive where i want o save the files.
c) given the full privieleges for the app pool identity- in my case , its
network service.
the other strange thing is that, the same code works perfectly in other machine, where the same sp, vs 2012 etc were installed .
would like to know, any other changes/ steps i need to make it on this server, where i am getting the error.
help is appreciated!

vishnuS1984 wrote:
Hi Friends,
I have gone through scores of examples and i am failing to understand the right thing to be done to copy a file from one directory to another. Here is my class...So let's see... C:\GetMe1 is a directory on your machine, right? And this is what you are doing with that directory:
public static void copyFiles(File src, File dest) throws IOException
// dest is a 'File' object but represents the C:\GetMe1 directory, right?
fout = new FileOutputStream (dest);If it's a directory, where in your code are you appending the source file name to the path, before trying to open an output stream on it? You're not.
BTW, this is awful:
catch (IOException e)
IOException wrapper = new IOException("copyFiles: Unable to copy file: " +
src.getAbsolutePath() + "to" + dest.getAbsolutePath()+".");
wrapper.initCause(e);
wrapper.setStackTrace(e.getStackTrace());
throw wrapper;
}1) You're hiding the original IOException and replacing it with your own? For what good purpose?
2) Even if you had a good reason to do that, this would be simpler and better:
throw new IOException("your custom message goes here", e);
rather than explicitly invokign initCause and setStackTrace. Yuck!

How to update link and import data of relocated incx file into inca file?

Subject : how to update link and import data of relocated incx file into inca file.? The incx file was originally part of the inca file and it has been relocated. ------------------- Hello All, I am working on InDesignCS2 and InCopyCS2. From indesign I am creating an assignment file as well as incopy files.(.inca and .incx file created through exporing). Now indesign hardcodes the path of the incx files in inca file.So if I put the incx files in different folder then after opening the inca file in InCopy , I am getting the alert stating that " The document doesn't consists of any incopy story" and all the linked story will flag a red question mark icon. So I tried to recreate and update the links. Below is my code for that //code start***************************** //creating kDataLinkHelperBoss InterfacePtr<IDataLinkHelper> dataLinkHelper(static_cast<IDataLinkHelper*> (CreateObject2<IDataLinkHelper>(kDataLinkHelperBoss))); /** The newFileToBeLinkedPath is the path of the incx file which is relocated. And it was previously part of the inca file. eg. earlier it was c:\\test.incx now it is d:\\test.incx */ IDFile newIDFileToBeLinked(newFileToBeLinkedPath); //create the datelink IDataLink * dlk = dataLinkHelper->CreateDataLink(newIDFileToBeLinked); NameInfo name; PMString type; uint32 fileType; dlk->GetNameInfo(&name,&type,&fileType); //relink the story InterfacePtr<ICommand> relinkCmd(CmdUtils::CreateCommand(kRestoreLinkCmdBoss)); InterfacePtr<IRestoreLinkCmdData> relinkCmdData(relinkCmd, IID_IRESTORELINKCMDDATA); relinkCmdData->Set(database, dataLinkUID, &name, &type, fileType, IDataLink::kLinkNormal); ErrorCode err = CmdUtils::ProcessCommand(relinkCmd); //Update the link now InterfacePtr<IUpdateLink> updateLink(dataLinkHelper, UseDefaultIID()); UID newLinkUID; err = updateLink->DoUpdateLink(dl, &newLinkUID, kFullUI); //code end********************* I am able to create the proper link.But the data which is there in the incx file is not getting imported in the linked story.But if I modify the newlinked story from the inca file,the incx file will be getting update.(all its previous content will be deleted.) I tried using Utils<IInCopyWorkflow>()->ImportStory() ,But its import the incx file in xml format. What is the solution of this then? Kindly help me as I am terribly stuck since last few days. Thanks and Regards, Yopangjo

>
I can say that anybody with
no experience could easily do an export/import in
MSSQLServer 2000.
Anybody with no experience should not mess up my Oracle Databases !

Retaining original filename in FILE- SOAP- SOAP- FILE

We have faced a scenario where I have to retain original filename in File-> SOAP-> SOAP ->File. The issue is that we don't have any ESR objects and neither do we intend to create any. So its purely configuration to transfer file from one folder to another.
Any suggestion would be highly appreciated.
Thanks,
Swati

Hello Swati,
Even after trying the above steps suggested by Praveen, if you don't get the results use Dynamic Configurations module in the Receiver channel along with the above settings.
1) Make sure the above settings are done (given by Praveen)
2) Assign a new variable as the file name parameter under receiver channel configurations.
3) Assign the "message:interface_name" value to the variable under Variable Substitution
4)Under Module Tab do the following:
Let me know if you still face any further issue.
Regards,
Simran

Unable to see the logical path and file created in FILE tcode from AL11 and unable to upload the file to this path from front end

Hi Experts,
I have created the logical path and filename in FILE tcode.I am trying to upload the pdf file to application server by using this path.But
I am getting message like "Unable to open the file".Even I cannot find the this path in AL11 tcode.Kindly anyone advise how to upload pdf file using
custom path and file created from FILE tcode.
Thanks & Regards,
Anusha.

Hi Anusha,
Please give as below.
I forget to say you cannot open the PDF in AL11 and for that you need some configuration, i think it can be done using content server,not sure completely please wait for some more suggestions.
Regards,
Pavan

Archiving TXT files in Sender File Adapter--Unformatted Way

Hello,
I am Archiving TXT files thru Sender file adapter, files are getting archived to specified directory.No issues in that.,
When i open the archived files, those are not in the correct format way that i placed before file pickup.
Header & lines got messed up side by side.
Regards

Hi,
If the file that it being archived is not transformed, it should exactly be the same as the original file.
Please make sure that you are not transforming the archive file by any means(unix script, mapping logics etc).
As suggested above, it is advisable to open the file in the editors like textpad, ultraedit etc. The difference in the alignment could be because of the notepad editor.
Try to open the original and archived files in any of those(textpad,ultraedit etc) editors and check.
Please let us know if you are still able to find the difference in the alignment.
Regards,
Subbu

Additional Files in Sender File Adapter

Hi
I have to collect 2 files (IN.txt, IS.txt) and attach 2 files as an attachment to mail.
So I opted Additional Files in Sender File Adapter
Source Directory = D:\usr\sap\pitest\LoadTest\Output\Invoice
File Name = IN.TXT
Additional Files
File List <IS.TXT>
<IS.TXT>.namePart ".TXT"=".TXT"
<IS.TXT>.optional NO
<IS.TXT>.type TXT
But I am able to Pick only one file (IN.TXT) from the Source Directory.
IS.TXT file is not at all picking.
Please give me your suggestion.

I reply just want to close this issue.
if file Name = Item.TXT and additional file name is ItemText.csv then configuration as following.
File List <Item.TXT>
<IS.TXT>.namePart ".TXT"="Text.csv"
<IS.TXT>.optional NO
<IS.TXT>.type TXT
for namePart parameter, we should give the str which need to be replaced. for your example, we could give as <IS.TXT>.namePart "IS.TXT"="IN.TXT"
replace all the file name.

File Error:Unknown File.

I am getting a "File Error:Unknown file" when i try and save my project. So i am not able to save any changes i make to my project. any thoughts?

Try FILE>Save Project As.
does that work?
Shane

"File error: unknown file" upon movie import

Got a DVD. Extracted the footage with Mac the ripper. Created an mp4 file with Handbrake. It plays fine in Quicktime at 720 by 480 and 23.98 FPS. I've tried importing it into FCP and I get the error, "File error: unknown file". FCP sequence presents are 24 FPS...I've also tried switching it to 23.98 FPS. I've re-encoded the movie in Quicktime to a .mov file with "DV/DVCPRO - NTSC" compression and it still will not import. Any suggestions?

Tried making an AVI in Handbrake. Handbrake just froze everytime and it would never finish.
I should also note that FFMpeg did not like the footage either and would not convert it to a file of any kind.
So I put the DVD into a consumer DVD player and used my Panasonic DVX100B camera to record the footage in VCR mode. The tape turned out fine.
BUT...
I am trying to capture the footage from another low end Canon camera. Usually there is no problem. However, with this particular footage from this cursed DVD, I get a "general error" when I try to capture the footage in FCP.
No matter what file format or media is used, this footage will not import into FCP. It must be watermarked to not like FCP.
Any further suggestions???

File Error: Unknown File when trying to render a Motion Lower third

I'm getting this: "File Error: Unknown File" when trying to render a Lower third made in the Motion tab. I'm using FCP 6.0.6 and haven't had any issues with this before. It seems to work fine if there is just text, but as soon as I apply any effect, like a drop shadow, I get that error message.
Thanks,
Joe

What's the exact format of the video you're working with and the exact specification the sequence you're editing in?

File Error - Unknown file when trying to import from HDD camera

I recently purchased a Panasonic SDR-H80 and am trying to get my widescreen footage into FCP. I converted the .MOD files to .m4v files in Handbrake, and they play and look fine in the Finder. However, when I try to move them into FCP, I get a dialog that says "File Error - Unknown file." I'm not sure what I'm doing wrong here. Can anybody help?

I converted the .MOD files to .m4v files in Handbrake .... I'm not sure what I'm doing wrong here
What you're doing wrong is using Handbrake and trying to use .m4v files in FCP. Neither is the correct process in preparing for editing.
Try using MPEG Streamclip and a format that actually works natively in FCP. .m4v is a final delivery format- not for editing. A search on this forum would have revealed that to you in a matter of seconds: http://discussions.apple.com/search.jspa?objID=c206&search=Go&q=handbrake
-DH

File Error: Unknown File, Cannot Save

I hope this is only a matter of healthy file management, but I'm quite confused and hope someone can clear this up into something of a simple science. On the otherhand, could this be a LIMITATION of FCP?
-Have been editing a sequence from a larger film on a second computer. That sequence has been worked on over several days and saved (of course). However, upon saving last night, was an error message: "File error: Unknown File" and the project could not be saved.
-This is quite possibly due to the fact that both the media and project files have been copied over the network to the first computer where the master project is being assembled.
-HOWEVER, no media files claimed to be offline, everything was editable AND the FILE WOULD NOT SAVE through multiple attempts
-ALSO, the other open project WOULD NOT SAVE either (its files where never moved or otherwise tampered with. It was a small and entirely local operation).
-SAVING was finally accomplished ONLY by saving the project file to the LOCAL HD rather than the EXTERNAL DRIVE where the MEDIA and PROJECT FILES originated and had been previously saved to.
-All other attempts to save to the EXTERNAL were met with the message "FILE ERROR: UNKNOWN FILE" This compromised saving process resulted in the loss of all work, edits, etc. on the LESSER and EXCLUSIVELY local project.
-AFTER saving to the LOCAL HD, the project COULD BE once again saved to the EXTERNAL HD. This flow seemed very strange to me.
-Has anyone else encountered this problem, and what can I correct in my processes to avoid this.
--*Also, the First computer encountered the same problems at the same time, after both EDITING & SAVING had taken place since the last FILE COPYING. Again, work was lost.
Thanks for any help you can offer.
G5 Dual 2 GHz PowerPC Mac OS X (10.4.5) 1.5 GB ram

Do people search this forum at all?!?
Check your project for CMYK files.
Search this forum for General Error.
This was discussed about 90 minutes ago.

File.ico in file.xpm

Similar Messages

Maybe you are looking for