File-IDOC, idoc interface error

Hi,
Scenario: File-IDOC (Multiple records in source file to be mapped to multiple CREMAS IDOCs) without BPM.
Modified the occurance(maxOccurs = 'unbounded') in XSD structure of IDOC(CREMAS) and saved it as external definition.
I have used this external definition in message mapping and interface mapping.
In configuration, i have used the same message interface (corresponding to external definition) as inbound interface.
Now, I get the following error.
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIAdapter</SAP:Category>
<SAP:Code area="IDOC_ADAPTER">ATTRIBUTE_WRONG_INTF</SAP:Code>
<SAP:P1>MI_Cremas04_multi_external</SAP:P1>
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Unable to interpret IDoc interface MI_Cremas04_multi_external</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
Please help.

Hi,
>>I have used this external definition in message mapping and interface mapping.
In interface mapping you need to use Imported IDOC not External definition
This solves your problem.
let me know if you have any issues still.
Cheers,
Jag

Similar Messages

File-PI-SOAP Interface error

Dear All,
We are trying a interface in which we wanted to do Post Goods Issue in SAP from a file. We have exposed our Z-RFC which will do PGI as webservice and has imported its WSDL in PI.
Then, we have created a File-PI-SOAP interface. Now, when we are testing the interface we are getting success message in SXMB_MONI but in RWB, message for picking the file is success and when I am opening the message details its showing
" 500 Internal Server Error" ""Application error occurred during the request procession."
Details: "The WebApplicationException log ID is [001A64D0A1FC005F0000004600002E4800CEA8DA2043BF9A]."
Same error is showing for the receiver message but at payload I am able to see the correct values.
Kindly let us know, if any configurations are to be required to remove thsi error.
Regards,
NJ

Hi,
>500 Internal Server Error
does mean the server does not understand the request. I your case: You want to make use of a service which assumedly no exist. May be you have to release or activate it or to do something in SOAMANAGER. Please check your service first with SOAP UI.
Regards,
Udo

File-to-Idoc error (using business sender service)

Hello,
My scenario is Flat file to IDoc. I am using a business service as my sender system. I did put in a logical system name in the business service and I have added the logical system in SALE.
The error I am getting is <SAP:Code area="IDOC_ADAPTER">ATTRIBUTE_IDOC_METADATA</SAP:Code>
<SAP:P1>MSGGUID 526719BA7E874E3906EEF45B43806D5C: Tag CULL_GR_RECORD found instead of tag IDOC BEGIN=</SAP:P1>
This is confusing to me because the CULL_GR_RECORD is the name of my data record of the file that is converted into an idoc within XI.
Can someone please help me with this? I would really appreciate it. I need to solve this tonight.
Thank you.

Hi,
>> I am using a business service as my sender system.
This is fine as ur sender is file.
I suggest deleting the matadata in IDX2 and then rerun the entire interface.
Make sure ur IDoc is imported properly to the IR. If yes, test ur mapping locally once.
Regards,
Divija.

File to Idoc -- Unable to interpret IDoc interface mi_Orders05_In_Asyn..??

Hi All,
Im trying the File to Idoc scenario.. and im getting the following error in SXMB_MONI,
Anyidea what might have gone wrong??
<SAP:Category>XIAdapter</SAP:Category>
<SAP:Code area="IDOC_ADAPTER">ATTRIBUTE_WRONG_INTF</SAP:Code>
<SAP:P1>mi_Orders05_In_Asyn</SAP:P1>
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
+<SAP:Stack>Unable to interpret IDoc interface mi_Orders05_In_Asyn</SAP:Stack>+
<SAP:Retry>M</SAP:Retry>
Waiting for your answers.
Thank You.
Seema.

Hi Seema,
I think you are using mi_Orders05_In_Asyn as the IDOC interface.
Use the imported idoc as the interface. i.e you dont need to create Inbound Message interface for IDOC. You can use the imported idoc structure as interface.
Let us know if that doesnt solve your problem.
Regards,
Sumit

File to idoc mapping error

Hi,
I am mapping a flat file to idoc in xi. If I execute the test data it works fine. But in actual run, it gave me the following mapping error:
com.sap.aii.utilxi.misc.api.BaseRuntimeException thrown during application mapping com/sap/xi/tf/_MM_MT_APPayment_to_FIDCCP02_: Runt
imeException in Message-Mapping transformatio~
Exception of class CX_XMS_SYSERR_MAPPING
Is it due to some mapping error or some basis config issue?
Thanks,
Jassi

Hi Jassi,
This may be a mapping issue, try this:
a)in interface mapping see if grids are formed at source and target after executing the test option,
b)also take the xml of the idoc from sxmb_moni , copy it and paste it at the source of the mapping ( use the src tab now) and execute the mapping, is your file structute formed?
Check the following link:
/people/michal.krawczyk2/blog/2005/09/16/xi-how-to-test-your-mapping-in-real-life-scenarios
Amaresh

XI unable to post IDOC to ECC the interface is FILE-to-IDOC scenario

Hi All,
The XI interface is a FILE-2-IDOC scenario and some times IDOC's in the receiver system are not posted. I did see successfully message for that particular messages but the IDOC's were not created in the ECC. If the messages is reprocessed then IDOC's are posted successfully to the ECC system. The message has checkered flag in the SXMB_MONI tcode.
This issue is occurring intermittently so could some point me in the right direction how to trouble shoot the issue.
Thanks,
Sarvesh

Hi,
Interesting problem...since its intermittant..
You cannot use any of the traditional RWB or message monitoring or cc chanel monitoring here as the error is in the ecc system, so from an XI standpoint it has left XI succssfully..that explains all the chequered flags..indicating success.
we19, we12, we14(process all idocs) test out the whole process with a load..use transaction we46..this can tell you why it is failing....in r/3
from the ecc system to check inbound queue monitoring.
from there you can select the IDocs or queues which you want to monitor, using the specified selection parameters available.
Look at the status record for the idoc that should give you more information, processing status of the idoc...that should tell you the status code assigned to it..
There is one other option here....if you can figure out what sequence they need to be posted in...that might be the reason for the failure..you can specify the sequence to post the idocs in, use qRfc ..
Hope that helps
Regards
Ravi Raman

File to IDOC - Error Inbound -56

Hi,
I am doing file to Idoc. (CREMAS01).. My scenario in
RWB is successful. But in R/3 it is shwoing IDOC
error :"EDI: Partner profile inbound not available".
I created Partner Profile in R/3(logical name of BS-
sender file). Still is shwoing Error.
Regards,
Mukharji
Message was edited by: Mukharji T

Hi Mukharji,
I hereunder give you the step by step procedure for File to IDOC scenario. Cross check whether you have done all these:-
SLD
1) Create a Product/Software Component
2) Technical System pointing to R/3 system
3) Business System for the above technical system
In the Repository
1) Import the Software component created in the sld
2) Create a namespace,
3) import the idoc and then create sender data type/message type etc and mapping
4) Mapping Rules is depends on the requirement
In the Directory
1) Create a Scenario /import the business system
2) Create Receiver/Interface determination
3) Create communication channels for sender and receiver
4) Sender Agreeement and Receiver Agreement.
Then the file adapter configuration is depend on the input file format.
Also you need to have Logical destionation created in the XI , and the IDX1 entry
In R/3 Port, Partner profiles etc should be created
Have a look into this document~
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/877c0d53-0801-0010-3bb0-e38d5ecd352c
While doing an File -> XI -> IDoc scenario, The Points to noted are:
1. You dont need a DT, MT or a message interface for the IDOC as it itself acts as the Message Interface.
2. You import the IDOC and use the same in your mapping.
3. In this configuration note that you will need a sender agreement for the file.
4. In this configuration note that you will also need a receiver agreement for the IDOC.
For any File -> XI -> IDoc scenario ref:
/people/anish.abraham2/blog/2005/12/22/file-to-multiple-idocs-xslt-mapping
Hope this helps you.
Regards.
Praveen

Message has error status at outbound side File To Idoc Scenario

hi ,
In my File to Idoc scenario , when i go to sxmb_moni , i found that its showing red flag at Outbound Status Tab and showing message "Message has error status at outbound side".
When i go to IDX5 and and select my idoc and click on Transaction Id it shows "Password logon no longer possible - too many faile" .
Please suggest what may be the problem ?
Regards,
Rohit

1. First check the RFC destination name used in receiver Idoc adapter communication channel.
2. As i said earlier, in sm59 transaction in XI gui, u can check same rfc destination under type 3. There check the logon credentials and the username.
3. Now goto the R3 system GUI and check in su01 that same user is locked or not. If locked unlock it.
4. And if u change the password of that user, then do the similar change in XI -> sm59 -> rfc destination logon credential
Regards,
Prateek

Error in File to IDOC Scenario

Hi,
I have File to IDOC scenario.
I am getting error in sender file channel.
"Conversion initialization failed: java.lang.Exception: java.lang.Exception: java.lang.Exception: Error(s) in XML conversion parameters found: Mandatory parameter 'xml.keyfieldName': no value found "
Although I have used this parameter in content conversion 'xml.keyfieldName' (for each sub structure and defined a key field).
Despite of this error in sender channel I am receiving the message in XI.
But in XI also it throws error :
"Unable to convert the sender service PG_TOM_CEEMEA_RU_SFA to an ALE logical system"
Any help on this ?
Thanks,
Vikas

Hello Vikas,
I am getting error in sender file channel.
"Conversion initialization failed: java.lang.Exception: java.lang.Exception: java.lang.Exception: Error(s) in XML conversion parameters found: Mandatory parameter 'xml.keyfieldName': no value found "
Although I have used this parameter in content conversion 'xml.keyfieldName' (for each sub structure and defined a key field).
Check your flat file structure whether the key field you have chosen is appropriate and also recheck the FCC details whether you have assigned the value for the key field i.e. keyFieldValue.
"Unable to convert the sender service PG_TOM_CEEMEA_RU_SFA to an ALE logical system"
regarding the above error refer this
https://wiki.sdn.sap.com/wiki/display/XI/Unable%20to%20convert%20Sender%20system%20to%20ALE%20logical%20system
Regards,
Prasanna

Error in file to idoc scenerio

hi
in file to idoc scenario
i got error in sxmb_moni
in status it is showing recording,
in Q.status it is showing stop symbol.
waiting for suggestions.

Hi Sandeep,
Have a look at queue problms here
/people/prashanth.azharuddin/blog/2006/11/24/some-errors-in-an-xi-production-environment
Some additional help
Q.Status is "Queue stopped"
queue status is stopped
Regards,
Prateek

Error in File 2 Idoc

Getting following error while doing Simple File to Idoc scnerio
Leaf node with min occurence>0 and with out mapping.
please Help

Hello,
You try to send an idoc that require a filled node without filling it.
For example, the node B must to be fill :
<A>toto</A>
If you don't fill it you have an error.
Regards,
Chris

Error in File-PI-Idoc scenario

Dear All,
While working on File-PI-Idoc scenario, I am getting the error as
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="INTERNAL">UNAUTHORIZED</SAP:Code>
<SAP:P1>401</SAP:P1>
<SAP:P2>Unauthorized</SAP:P2>
<SAP:P3>(See attachment HTMLError for details)</SAP:P3>
<SAP:P4 />
<SAP:AdditionalText />
<SAP:Stack />
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
I have checked various other posts on the same error but still I am not able to resolve this.
Please help me in resolving this error.
reg,
nj

Nishu,
Please check whether you have assigned the following roles to the particular user you are using for data communication.
Roles:
SAP_XI_IS_SERV_USER,
SAP_XI_APPL_SERV_USER
Regards,
Sugata

File to idoc adapter :IDOC IS POSTED IN XI but showing error EDI partner

Hi ,
my interface is working fine but issue is that in Recver R3 system idoc is in errors status 56 (EDI partner profile not available.
I already define business system which is used to send data from XI.
My Business system name is testBsys1 for sender XI service.
In R3 i have created logical system testBsys1
and in we20 already created partner profile testBsys1
and also maintain in bound parameter.
please suggest me where is i am doing mistake.

Hi Mohit,
How is the control record of the posted Idoc made in PI? Check the Control Record of The IDoc that is posted in R3, it is not having correct information.
IF you are not making the control records in PI mapping, then in the receiver IDoc, keep apply control records from payload as checked.
Regards
Suraj

File to idoc error

i am testing File to idoc scenario..
everything went smooth in XI...51 status error at ECC.
when i went into details..it says..Fill in all required entry fields
i tried checking those ..but its fine
what should be the error

Hey
When you execute the function module in foreground,you will see errors(if any) in red color along with the field which is giving this error(with explanation).fix that error and try to post IDOC's again.
to me it looks like the configuration is not in place to receive your IDOC,you might be passing some value which is not valid for proper configuration.
Like in my case i was giving wrong ship to party,this ship to party was not configured in R/3 hence IDOC was not posted correctly.
Thanx
Aamir

Regarding error in XI File to IDoc scenario

Hi,
when i was doing file 2 idoc scenario i got this error "Unable to convert sender service to an ALE logical system". please resolve my issue as early as possible.

Uday,
Please go through these threads:
Unable to convert the sender service to an ALE logical system
How to convert Sender Party/Service to a Logical System?
Unable to convert the sender service to an ALE logical system
BR,
Alok
Edited by: Alok Sharma on Jan 31, 2008 12:39 PM

Idocs with errors added status-56 in file to idoc scenario- how to rectify

hi ,
in file to idoc scenario when i m sending the file from ftp server to IS Retail, file is successfully getting processed but the idoc is showing error ,when we see using WE05 tcode or BD87 , pl sugggest how to rectify it to make the status 53

Hi,
Have you configured the partner profile details? check these steps..
1. In the receiver system you must configure the partner profile for your sender system in WE20.
2. Add the IDoc message type to inbound parameters of the partner profile and configure the appropriate process code.
2. Fill the Logical system name for your senderservice-->Adapter Specific identifiers in ID.
<a href="/people/venugopalarao.immadisetty/blog/2007/01/24/troubleshooting-file-to-idoc-scenario-in-xi File-to-IDOC Scenario</a> By Venugopalarao
<a href="/people/ravikumar.allampallam/blog/2005/02/23/configuration-steps-required-for-posting-idocsxi Steps for Posting IDOC's</a> By Ravikumar Allampalam
Regards
San

File-IDOC, idoc interface error

Similar Messages

Maybe you are looking for