File Manager Shows PC as 'Offline' - Unable to Access Files
Hello,
Link is installed (latest version and has been reinstalled) on 2 PC's.
Both show up on the file manager, but one is Offline. This only started recently.
Have restarted everything, checkd the firewall and antivirus and but exlcusions for all BB/RIM applications.
Please assist.
Thanks,
Solved!
Go to Solution.
Hello,
I have connected via Blue Tooth and it works. I send files to the PC via BT all the time. No issues.
The two generics came back on the phone immediatly, the never appeared on the PC.
From BB Link Settings: From File Manager:
On PC BT :
Thanks
Similar Messages
-
Unable to access BPM composer UI despite installing BPM Suite 11g
Hi,
I've installed BPM suite (& SOA suite too) but even after starting Admin server and managed server (soa_server1), I'm unable to access BPM composer (I'm
using URL similar to http://host/bpm/composer) though I can access WLS console, EM, BPM worklist application etc correctly. Just wanted to check, what else needs to be done to use BPM composer? Kindly let me know.
Thanks,
HarshThanks Rommel. It worked!
PS: I've seen Composer UI working fine in other BPM installations without specifying port in URL, so I was also trying on similar lines. -
I'm unable to access content on my iPod Classic while it is connected to iTunes.
The iPod itself shows up and is set to manual management, but I am unable to view or play any of the content on it (music, movies, podcasts etc.).
I can click the tabs Music, Movies etc. but I can't see anywhere to access the files themselves, no music or movies are listed, I only have the option to 'Sync' with the iTunes, which I don't want to do as there is no content on the iTunes!!!
I just downloaded the iTunes program.
Very confused, pleaseee help ...Here is what worked for me:
My usb hub, being usb2, was too fast. I moved the wire to a usb port directory on my pc. That is a usb1 port which is slow enough to run your snyc. -
N97 freezing up - unable to access file manager/co...
I don't know if anyone can help me ... My n97 was working fine uptil yesterday! however, this morning it kept getting stuck e.g. not able to see the photos, accessing apps, or file manager. Now even the four contacts I have on my home screen aren't showing ... or rather one isn't the other three are horribly blurred images!
I've tried giving a hard reset which it did but it's still not working. I'm trying to uninstall some apps I don't need but it freezes up every single time. When I try to access file manager it gets stuck showing "opening". I can't access my messages because it freezes.
I've got a feeling its something to do with the phone memory. I've recently updated to the new firmware version 11 ... however I've found out it's gotten slower!
Please can someone help me ... I'm going crazy I simply can't use my fone!
Solved!
Go to Solution.Can anyone help????
I purchased a Nokia N97 approx 6 weeks ago, I am now up to handset number 4 and am about to take it back AGAIN!!!
I am continuously having problems with the phone freezing, black/blue screens, "unable to use/access functions" coming up on screen, when switching off phone it goes through all the applications I have had opened before it turns off, just to name a few.
These are just a few issues that I have been having and continue to have with the handsets. I love using the N97 and am quite happy to keep using it, but am starting to think it is not a reliable phone at all and unfortunately I signed up to a 2 year contract.
I have gone online on numerous occasions and checked for software updates and nothing comes up on my phone, so I assume that the phone has the latest software. If anyone has any solutions to my problems can you please let me know as I am not gettig any help from Nokia or my service provider.
Thank you -
When opening an XPS file, IE hangs. Task manager shows XPSViewer.exe taking 50% of CPU.
I've seen this twice now on older XP machines (sadly, some of my users DO have to run XP) so I figured I should document it, if only because the fix is so non-intuitive.
By default, XPS documents open in IE with a helper called XPSViewer.exe. You can also open them in a separate standalone viewer by installing the Microsoft XPS Essentials thing
http://www.microsoft.com/en-us/download/details.aspx?id=11816
But that doesn't work in IE, and my users needed it to.
Sometimes, users report that when they open an XPS file, the browser hangs. Checking task manager shows that XPSViewer.exe is taking up 50% of CPU cycles. Ending the process allows IE to respond, but the document is not displayed.
The first hint at a solution was from:
http://discussions.citrix.com/topic/273861-cannot-open-xps-files/
"This issue occurs because the non-administrator user account cannot access the %WINDIR%\System32 folder. By default, WPF writes the output file to the %WINDIR%\System32 folder. The %WINDIR%\System32 folder requires administrator permissions.
When the non-administrator account tries to access this folder, the WPF caching code is triggered. This code causes the screen to flicker.
In 32-bit versions of the Windows Server 2003 operating system, the output file is D3d9caps.dat. In 64-bit versions of the Windows Server 2003 operating system, the output file is D3d9caps64.dat. "
It got me thinking that maybe i could modify the rights to the file instead of applying the hotfix...
After doing that the user could open the .xps file successfully!. But after closing the xps (internet explorer uses xpsviewer.exe to display the file) the file d3d9caps.dat disappeared from the system32 folder...
The next time the .xps file was opened by the user, the d3d9caps.dat file was not created in system32 folder as one might expect, but instead in the more appropriate path "...Documents and Settings\username\Local Settings\Application Data" folder.
So in fact, all i had to do to fix this problem was deleting/renaming the d3d9caps.dat file in the system32 folder.
So all you have to do is delete (or for safety, rename) that d3d9caps.dat file and try again! Works a treat!In the %WINDIR%\System32 folder, find d3d9caps.dat or d3d9caps64.dat
and rename it to anything. Bamn. Fixed. That easy. -
Task manager showed events Critical and Warning Multiple 2/19/2014 - It added itself to API and changed some files to Read Only, Shows No Net path/ locked and changed. most all permissions on my administrator read write, Few say read,
write, execute, the program it made for TRUSTEDINSTALLER allows full access include write. Some are ready for archive.? On what I think are shells or shadow copy since has 0 files o folders o data and share says No Network Path--- I used
API to gain control of about 3 folders. all said 0 - 0 - 0- no path Opened property on each and two of the three had between 10 - 27 different files....
The thought of having to go through every folder on the computer like that ? WOW cant imagine. HELP
Windows was preinstalled by best buy. I see dates on folders that are OS files for system process date to 7/2013 I bought this in November 2013.. Other computer had to be replaced by best buy, could not get hardware part? From
Lenovo.
Could they have installed my other windows 8 from Lenovo and just deleted Lenovo information and left the tangled mess.
Had issues since Dec 15 off and on, but was ale to fix ---- THIS ONE ____ I GIVE UP one folder says $WINDOWS? another common folders and program files x32 twice and x84 once and x64 once old
windows, windows. it goes on in multiple similar. Unless I go through each and every file, I don't know if real or empty????? PLEASE HELPThis isn't a ConfigMgr issue. Please post your thread to another forum (Windows 8).
-
Unable to Access Internet Despite Adapter Showing "Connected".
Hi, I have a Lenovo "G"-Series notebook, Type 4446-38U which has suddenly stopped allowing me to access my internet connections. The PC is only about a month old. It is running XP Professional.
I have three connection options: 1) dial-up (using an onboard HDAudio Soft Data Fax Modem with Smart CP); 2) ethernet or Local Area Connection (using an onboard Broadcom Netlink Fast Ethernet); and 3) wireless (using an onboard Intel WiFi Link 5100 AGN) -- none of these components are showing that they have conflicts/problems in the System Properties/Device Manager.
At my home, which is located in a rural area where I can only get dial-up, I tried checking my e-mail last week (with Mozilla Thunderbird), but received an error notice stating that the e-mail server could not be found; it was the same issue, when I tried to get Norton virus updates (Internet Security 2009), XP updates on the Microsoft website (using Microsoft Updates with Internet Explorer), and simply accessing the web (using Mozilla Firefox) -- i.e., "Server Not Found." The odd thing is that I can not only hear the connection being made by the modem, but can also see that the device is 'Connected', when I check the connection in Control Panel/Network Connections. The following day at my office, I checked the other connection options (ethernet & WiFi), and found that I had the same problem -- i.e., they were shown as "Connected" in Control Panel/Network Connections, but I was unable to access anything on the web (e.g., e-mail, Google, virus/Microsoft updates, etc.). It's as if there is something blocking the internet connection to these programmes/utilities.
When I ran the Microsoft Networking Troubleshooter ('Diagnose Network Configuration & Run Automated Networking Tests), all the Network Adapters were shown as having passed. Ditto, when I ran the "Test a TCP/IP Configuration Using the Ping Command" -- pinging 127.0.0.1, the results showed 4 packets sent and 4 received.
I spent several hours on the phone with Lenovo Tech Support to no avail, and their instruction that I uninstall Norton Internet Security made no difference either. When they instructed me to open a Command Prompt and ping 192.168.1.1, the results showed that there were 4 packets sent and 4 received. When I was instructed to ping the IP Address for the wireless adapter, the results showed 4 packets send and 4 received. When I was instructed to ping www.google.com, the results showed that the ping request could not find the host www.google.com. Lenovo Tech Support stated that there was nothing further they could do, and that I needed to use a utility to set everything back to factory specs (i.e., have a utility programme erase everything on the hard drive and reinstall XP ... and even then I was told that there was no guarantee that would fix things, meaning that the PC would then have to be sent into their repair depot). Before I do this, I was hoping that someone here might know as to what's going on with my connection problems and how it could be fixed, without having to erase everything.
I would appreciate any insight or advice anyone might have. Thanks so much!
~ JackI did do a complete uninstall of Norton (i.e., didn't save any of the settings), but that didn't resolve the connection problem. I also turned off Microsoft's firewall as well, once Norton was uninstalled (it had been turned off, when Norton was installed, and once Norton was uninstalled, MS firewall defaulted back to an on/active status).
I also forgot to mention in my initial description of the problem and actions taken thus far to try and correct it, that I additionally tried the "ping" procedure described in paragraph five above in Windows Safe Mode with Networking, but was still unable to connect to the internet. -
I have suddenly become unable to access photo library (iPhoto vers 9.5) on my external hard drive. Also time machine isnt backing up to same external hard drive (LaCie). The drive does show up on the desk top, but when i open iPhoto the library isnt listed, so I cant option click.
First, one should not try to run an iPhoto library from the same volume/drive that is being used by Time Machine for backups. TM will continue to fill up the drive thus squeezing out iPhoto from being able to be opened and used. Also that doesn't allow you to let TM backup your library as it does with other files on your boot drive.
If you partition the EHD into two separate partitions you can run the library from it but that won't let TM backup the library which is important.
Are you able to see the library on the EHD via the Finder? If so copy it back to your boot drive and open it there. You may have to do some fixing on it.
Solution is to either run the library from the boot drive or get a second EHD to run the library from and let TM back it up along with your boot drive.
OT -
My Mac OS Lion 10.7 FileVaulted HD does not boot, prohibitory sign, stop sign appears some minutes after boot starts. Disk Utility repair shows four error messages:
Unable to bootstrap transaction group 2517: inconsistent crosscheck
No valid commit checkpoint found
The volume xxxxxxxxxxxxxx(here it shows physical volume number) was found corrupt and can not be repaired.
Problems were encountered during repair of the partition map
Error: Storage system verify or repair failed.
(the same with 2518, 2519 and 2520 transaction group)
I suppose it is serious bug in Mac OS Lion managing FileVault and wonder what the help could be?Most likely culprit is your Lacie drives which are notorious for flaky power supplies which cause just the sort of erratic behaviour that you describe. Have had similar issues myself. Lacie has been good about replacing my power converter-- twice. If you have seven of them, good luck finding the bad one or more. Like I said, the behaviour is erratic. Sometimes it'll work sometimes not. I can't comment on Samsung drives because I've never used them and have never heard anything about them. Same with Softraid. Why not just use Disk Utility. Sounds like you're ready for an external hardware raid. This will be much faster, much more reliable, and may even be cheaper than seven firewire drives. Check out G Tech, and Maxx Digital for starters.
Best of luck
Terry -
I am using the firefox version 17 and when i drag and drop an image on my website. It gives me the following error.
Unable to access local files due to browser security settings. To overcome this, follow these steps: (1) Enter "about:config" in the URL field; (2) Right click and select New->Boolean; (3) Enter "signed.applets.codebase_principal_support" (without the quotes) as a new preference name; (4) Click OK and try loading the file again. Or go to the homepage for a link to the tutorial on how to do it.
I have completed the above steps and it is still showing the same error message. Any help would be highly appreciated.
Thanks.Thanks kumars ,
I have a specific drag and drop area on our website. This works fine for all earlier releases of Firefox after these security settings
"(1) Enter "about:config" in the URL field; (2) Right click and select New->Boolean; (3) Enter "signed.applets.codebase_principal_support" (without the quotes) as a new preference name; (4) Click OK and try loading the file again."
Bust these settings not work for me in Firefox 17.
Yes the drag and drop functionality is java script based and i am not using any script blocker addons. -
Installer was unable to access a critical file/directory. Please try installing again.(Error code: 43) Contact Customer Support
Any ideas?Hi Serpent,
Try the following Steps:
open activity monitor and close all Adobe related applications
navigate to: /Library/Application support/Adobe
In that directory you will see a folder named OOBE - Rename that folder to OOBEold
Navigate to: MAC HD /Application/Utilities directory
In there you will see a folder called "Adobe Application Manager" - delete it
Download the Adobe Cleaner Tool from here: http://helpx.adobe.com/creative-suite/kb/cs5-cleaner-tool-installation-problems/_jcr_conte nt/main-pars/accordion_container_1/accordion-par/accordion-item-1/accordion-item-par/proc e dure/proc_par/step_3/step_par/download/file.res/AdobeCreativeCloudCleanerTool.zip
Open the Cleaner Tool and choose to clean "Creative Cloud" only.
Download and install Creative Cloud again - https://ccmdls.adobe.com/AdobeProducts/KCCC/1/osx10/CreativeCloudInstaller.dmg
Regards,
Rave -
Unable to access Oracle VM Manager from browser
Hi,
I am unable to access the Oracle VM Manager from my browser at any of the url's e.g. /em; /OVS; /apex
I can connect to my server via putty, so I know the IP address that I am using is correct.
In the /var/ovm-manager/oc4j.log file I get the following message:
ERROR J2EE HTTP-00004 Internal error raised tyring to instantiate web-application: webapp defined in web site OC4J 10g (10.1.3) Default Web Site. Application: datatags does not exist. Error creating Web application: webapp
The oc4j service is running and the ovs-agent service is running but I cannot connect.
I am new to Oracle VM and Linux for that matter so it is entirely possible that something is not configured correctly somewhere
I'll appreciate it if anyone can assist
ThanksTry this command from the console or SSH to the server:
service iptables stop
If you can then access the URLs you will need to modify iptables to allow port 8888
I think this is the command:
iptables -I INPUT -p tcp --dport 8888 -j ACCEPT
then:
service iptables start
Then try to connect again. -
Unable to access media files on network via wirele...
Up until a month ago was able to access media files through wireless, Os is wins 7, HomeHub 2. the curious thing is no problem accessing internet wirelessly, Have reconfigured Homegroup network, changed WEP key, channel no,reset connected devises then for a couple of minutes I actually access my media files then nothing , and nothing since. unable to access Hub manager from desktop icon or internet browser now. One thing that might be pertinent is that my father has just had YouView installed around the time the problem started. Contacted the call centre for help they came back informing me that you cannot share files through a BT Hub ! last resort sent an email . Anyone out there can throw me a line I'd much appreciate it
Try a factory reset of the homehub by pressing a pin into the recess button on the rear for about 20 seconds. This will put your wireless passkey which is on the homehub label so you will need to either reconnect your devices to the default wireless passkey or change it back to what you had.
-
OAS Enterprise Manager shows false Hostname after reinstall the server
Hy,
we have an OAS 10.1.2.0.2 with and 10g (10.2.0.1.0) Database.
Ater a systemcrash we had to reinstall the DB (the dbf-Files are from an backup) and OAS.
we decieded to rename the server.
But now we have the following problem: the Enterprise Manager show the old Hostname.
I see the thread for OAS Re: Oracle Reports Stop Working after Join the Server to the Domain !!!
which points to the script "cmd /c chgiphost.bat -mid"
Is there a similar "Script" for the DB?
(I searched whithin the dbf-files and found lots of old hostnames...)
Thanks in advanceFor database is a different procedure, chgiphost is for OAS only, if you want to check this for database, you could, either go to DB forum and ask same question, or look in the admin guide for the DB you are using. There is going to be the way to make this changes.
Regards. -
Reader x or xi does not load; task manager shows 750 kb memory used
I am using windows 7 home premium 64 bits, and adobe reader x or xi sometimes does not load. However, the task manager shows that AcroRd32.exe is loaded, but only using aroung 750 kb of memory.
I must restart windows, or at least close sesion and sometimes reader loads properly. Sometimes the computer must be restarted twide to adobe function.
Does anybody has an idea why this is happening?I'm experiencing the exact same issue.
I am on Windows 7 Professional x64 SP1. I have updated Adobe Reader to latest version, and do not have other older versions of Reader installed. I have tried opening reader by itself using Run As Administrator, as well as Run as Another User, and also in XP SP3 compatibility mode. I have tried to force PDF files to be opened in a browser window by right clicking them, selecting Open With and then selecting Internet Explorer. Nothing works. I have had this issue before, and SOMETIMES it will help if I uninstall Adobe Reader and reinstall, but even after re-imaging my entire PC, this issue comes back.
As with original poster, all I get when trying to open PDF files is AcroRd32.exe showing in Task Manager and using between 700k and 1785K of memory. No matter how long I wait, nothing else happens.
This is getting very frustrating.
Seeing as I cannot load Adobe Reader at all, is there a way to disable protected mode without loading Adobe Reader (like with registry setting)?
Maybe you are looking for
-
How can I keep two macs in sync?
I'm not referring to just syncing the files as I know there are services like dropbox available or file sharing. I would like to keep the mac at my office and the one at home automatically in sync. For example, if I make a change to a document at the
-
How do i delete an unwanted picture folder from my iphone 4?
how do i delete an unwanted picture folder from my iphone 4?
-
how can i draw an image in a component and how can i draw an image instead of a graphic please help, i'm turning around
-
i need help my iphone 5c has been on charge for 5 hours and still has not turned on past the charging symbol, what can i do? (baring in mind i got this phone 2 days ago brand new.)
-
Is it possible to attache an external GPU enclosure to iMac?
Hi, Lately I saw couple of video clips on youtube for people who attach external GPU enclosure to MacBook Air and Pro to power these devices with more GPU performance by using thunderbolt cable. I want to buy an external GPU enclosure and attach it t