Unable to access media files on network via wirele...

Up until a month ago was able to access media files through wireless, Os is wins 7, HomeHub 2. the curious thing is no problem accessing internet wirelessly, Have reconfigured Homegroup network, changed WEP key, channel no,reset connected devises then for a couple of minutes I actually access my media files then nothing , and nothing since. unable to access Hub manager from desktop icon or internet browser now. One thing that might be pertinent is that my father has just had YouView installed around the time the problem started. Contacted the call centre for help they came back informing me that you cannot share files through a BT Hub ! last resort sent an email . Anyone out there can throw me a line I'd much appreciate it

Try a factory reset of the homehub by pressing a pin into the recess button on the rear for about 20 seconds. This will put your wireless passkey which is on the homehub label so you will need to either reconnect your devices to the default wireless passkey or change it back to what you had.

Similar Messages

Unable to access shared files over network after period of time.

First off, I don't think that this issue is related to our router, but I have been searching for a fix and can not find one. We have a WRT54GS. Now, on to our issue:
At my work, we have a small network with computers sharing files between the others. I have attached a network diagram to help explain this better.
Our Win7 machine is our main computer that shares an external hard drive with much information that the other computers need to access. What we have noticed is either after a sleep, or even a period of time of say, 2 hours, those files are no longer able to be accessed. The Win7 machine is still sharing them, but the WinXP machines are unable to access them anymore and my Mac can see the computer is unable to connect to the folders. I have gone and attempted to get some help over at Microsofts site but that was a fail. Here is the link to the forum post there. http://social.answers.microsoft.com/Forums/en-US/w7network/thread/f0a2e8d6-f75a-41d7-a280-c6f3adbffa...
A member there gave me this:
The Network connection is probably not resuming after sleep.
First try this, http://www.ezlan.net/Win7/power_save_win7.jpg
It is in the Network Connection Properties under the Network card configuration.
If it already checked this way, or does not work after checking, the Network card has to be taken out of the computer's Power Saving loop, and stay on all the time.
Otherwise, Updating the Card with the latest OEM drivers (downloaded from the computer's support site) might help too.
On a rare occasions, some cards might be "Quirky" in this regards and need to be replaced.
--I would like to add that this DOESN'T ONLY happen after sleep, it also happens after a time of being used.
I attempted those and no luck. This problem is still occurring and the only way we can fix it is by restarting the Win7 machine. But even if it is being used, we have no idea when those files are unable to be accessed.
*I will add that the Win7 machine is still able to access the other computers when this problem occurs if that helps.
**The Win7 machine is a Dell T3500 running Windows 7 64bit. I can provide specific hardware if needed. The drivers are all up to date as of yesterday.
***So upon looking in the Windows XP machine, both of the folders from the Win7 machine disappear once this problem occurs in the My Network Places folder. And one folder is on the internal drive, one is on external. The computers are in this situation now where I am unable to access them. The Win7 machine can read and write from the other computers, but the other computers can even see the Win7 Machine.
****All the connections are wired and are not using the wireless.
Thanks for any help that anyone may have for me!
Steve
Network Map > http://scubasblog.com/network.jpg
Dell Support Forum with same issue I posted >> http://en.community.dell.com/support-forums/network-internet-wireless/f/3324/p/19337620/19716797.asp...

It sounds like there is incompatibility issue with XP and Win7. To isolate this, do you have another Win7 machine? Try to add it to the network and check if the shared drives are accessible after sleep. If you don't have another computer, try virtual machine and create a Win7 system.
Update your LAN card driver from the manufacturer's site. Don't use the driver from windows update.
Lastly, does this happen to your XP machines? Like, one of the XP machine sharing a folder and falls asleep. When it wakes up, does Win7 machine can still access the shared folder?

Unable to access a windows 7 Workstation via RDP

Hi,
I have a windows 7 Pro SP1 workstation that I’m unable to access from any other machine via RDP...
This is a domain environment.
The machine in question is 100% up to date. (WSUS)
It's running an up-to-date anti-virus solution and has been scanned. (Panda cloud) (No firewall)
This is on a local network, no router involved.
Can ping the machine, can see network shares.
Checked that it's listening on the correct port.
Necessary services are running and are starting correctly.
Configured RDP correctly and tried different configurations (with and without NLA and adding/removing users)
This machine seems to be able to RDP into other machines, it just wont accept any sessions.
Assigning the necessary exclusions in firewall - no effect
Firewall is disabled by GPO and I have stopped the service - no effect.
Deleted the computer certificate - no effect.
uninstalled the RDP 8 update - no effect
Tried using both the IP and hostname - no difference
I'm completely out of ideas, no other machine I tested with is having this issue and all the domain machines are running same AV and same GPO's are applied.
Re-installation is not an option.
Below is the error - very unhelpful.
Kind Regards,
Stephen

Hi Hinte,
Here are the results:
Here is the netstat result - can't see 3389 anywhere:
Active Connections
Proto Local Address          Foreign Address        State           PID
TCP    0.0.0.0:135            0.0.0.0:0              LISTENING       1060
RpcSs
[svchost.exe]
TCP    0.0.0.0:445            0.0.0.0:0              LISTENING       4
Can not obtain ownership information
TCP    0.0.0.0:623            0.0.0.0:0              LISTENING       4124
[LMS.exe]
TCP    0.0.0.0:16992          0.0.0.0:0              LISTENING       4124
[LMS.exe]
TCP    0.0.0.0:18226          0.0.0.0:0              LISTENING       2476
[WAHost.exe]
TCP    0.0.0.0:49152          0.0.0.0:0              LISTENING       532
[wininit.exe]
TCP    0.0.0.0:49153          0.0.0.0:0              LISTENING       1140
eventlog
[svchost.exe]
TCP    0.0.0.0:49154          0.0.0.0:0              LISTENING       1292
Schedule
[svchost.exe]
TCP    0.0.0.0:49185          0.0.0.0:0              LISTENING       624
[lsass.exe]
TCP    0.0.0.0:49187          0.0.0.0:0              LISTENING       600
[services.exe]
TCP    0.0.0.0:49192          0.0.0.0:0              LISTENING       3268
PolicyAgent
[svchost.exe]
TCP    127.0.0.1:5939         0.0.0.0:0              LISTENING       2360
[TeamViewer_Service.exe]
TCP    127.0.0.1:5939         127.0.0.1:49206        ESTABLISHED     2360
[TeamViewer_Service.exe]
TCP    127.0.0.1:5939         127.0.0.1:49234        ESTABLISHED     2360
[TeamViewer_Service.exe]
TCP    127.0.0.1:49204        127.0.0.1:49205        ESTABLISHED     3856
[TeamViewer_Desktop.exe]
TCP    127.0.0.1:49205        127.0.0.1:49204        ESTABLISHED     3856
[TeamViewer_Desktop.exe]
TCP    127.0.0.1:49206        127.0.0.1:5939         ESTABLISHED     3856
[TeamViewer_Desktop.exe]
TCP    127.0.0.1:49232        127.0.0.1:49233        ESTABLISHED     2660
[TeamViewer.exe]
TCP    127.0.0.1:49233        127.0.0.1:49232        ESTABLISHED     2660
[TeamViewer.exe]
TCP    127.0.0.1:49234        127.0.0.1:5939         ESTABLISHED     2660
[TeamViewer.exe]
TCP    127.0.0.1:49241        0.0.0.0:0              LISTENING       4552
[UNS.exe]
TCP    192.168.100.22:139     0.0.0.0:0              LISTENING       4
Can not obtain ownership information
TCP    192.168.100.22:49201   92.51.156.72:443       ESTABLISHED     2360
[TeamViewer_Service.exe]
TCP    192.168.100.22:49203   197.85.190.46:443      ESTABLISHED     2360
[TeamViewer_Service.exe]
TCP    192.168.100.22:49211   192.168.100.5:445      ESTABLISHED     4
Can not obtain ownership information
TCP    192.168.100.22:49231   192.168.100.5:49159    ESTABLISHED     1732
[spoolsv.exe]
TCP    [::]:135               [::]:0                 LISTENING
1060
RpcSs
[svchost.exe]
TCP    [::]:445               [::]:0                 LISTENING
4
Can not obtain ownership information
TCP    [::]:623               [::]:0                 LISTENING
4124
[LMS.exe]
TCP    [::]:16992             [::]:0                 LISTENING
4124
[LMS.exe]
TCP    [::]:49152             [::]:0                 LISTENING
532
[wininit.exe]
TCP    [::]:49153             [::]:0                 LISTENING
1140
eventlog
[svchost.exe]
TCP    [::]:49154             [::]:0                 LISTENING
1292
Schedule
[svchost.exe]
TCP    [::]:49185             [::]:0                 LISTENING
624
[lsass.exe]
TCP    [::]:49187             [::]:0                 LISTENING
600
[services.exe]
TCP    [::]:49192             [::]:0                 LISTENING
3268
PolicyAgent
[svchost.exe]
TCP    [::1]:49179            [::]:0                 LISTENING       2008
[jhi_service.exe]
TCP    [::1]:49237            [::1]:49239            ESTABLISHED     4124
[LMS.exe]
TCP    [::1]:49239            [::1]:49237            ESTABLISHED     4124
[LMS.exe]
UDP    0.0.0.0:123            *:*
1256
W32Time
[svchost.exe]
UDP    0.0.0.0:500            *:*
1292
IKEEXT
[svchost.exe]
UDP    0.0.0.0:4500           *:*
1292
IKEEXT
[svchost.exe]
UDP    0.0.0.0:5355           *:*
1540
Dnscache
[svchost.exe]
UDP    0.0.0.0:21226          *:*
2476
[WAHost.exe]
UDP    127.0.0.1:50083        *:*
1400
gpsvc
[svchost.exe]
UDP    127.0.0.1:55096        *:*
624
[lsass.exe]
UDP    127.0.0.1:60632        *:*
1540
NlaSvc
[svchost.exe]
UDP    127.0.0.1:64416        *:*
4416
[IntelSmallBusinessAdvantage.exe]
UDP    192.168.100.22:137     *:*
4
Can not obtain ownership information
UDP    192.168.100.22:138     *:*
4
Can not obtain ownership information
UDP    [::]:123               *:*
1256
W32Time
[svchost.exe]
UDP    [::]:500               *:*
1292
IKEEXT
[svchost.exe]
UDP    [::]:4500              *:*
1292
IKEEXT
[svchost.exe]
UDP    [::]:5355              *:*
1540
Dnscache
[svchost.exe]
UDP    [fe80::3447:c85a:1d2d:4ff9%11]:546 *:*
1140
Dhcp
[svchost.exe]

Unable to access jar file error !

hello,
i have built my netbeans project and obtained the hequalifies.jar file . unfortunately when i'm trying to run this jar file from the prompt command I'mgetting the error: unable to access jar file
here is the command i'm typing:
C:\Users\User\Documents\NetBeansProjects\hEqUALIFIES\dist>java -jar " C:\Users\U
ser\Documents\NetBeansProjects\hEqUALIFIES\dist hequalifies.jar "
anyone has any clue?
10x!

ok i'm gonna make it easier on you.
i gess i found what is the problem but have no idea how to solve it.
when i obtained the .jar file i also obtained a README.txt file in which it is written the following phrase:
** If a library on the projects classpath also has a Class-Path element*
specified in the manifest,the content of the Class-Path element has to be on the projects runtime path.
I'M SORRY BUT I DID NOT UNDERSTAND WHAT IS MEANT BY: what is "the projects runtime path"?
the content of my manifest is:
Manifest-Version: 1.0
Ant-Version: Apache Ant 1.7.1
Created-By: 10.0-b23 (Sun Microsystems Inc.)
Main-Class: hequalifies.ui.HeQualifies
Class-Path: lib/PlugIn
X-COMMENT: Main-Class will be added automatically by build
I'm having problem with lib/plugin.

Error message at start-up Unable to access Jar file

I am a consumer, not a business...and not an IT professional. I am running Vista and have not installed any new software recently.
At every start-up, I get a pop-up titled Java Virtual Machine Launcher. The message says "Unable to access jar file". C:\users\user\.jnana.jnana.tsa.
Any idea how to fix this?
Thanks in advance.
Edited by: 794979 on Sep 15, 2010 5:31 AM

ok i'm gonna make it easier on you.
i gess i found what is the problem but have no idea how to solve it.
when i obtained the .jar file i also obtained a README.txt file in which it is written the following phrase:
** If a library on the projects classpath also has a Class-Path element*
specified in the manifest,the content of the Class-Path element has to be on the projects runtime path.
I'M SORRY BUT I DID NOT UNDERSTAND WHAT IS MEANT BY: what is "the projects runtime path"?
the content of my manifest is:
Manifest-Version: 1.0
Ant-Version: Apache Ant 1.7.1
Created-By: 10.0-b23 (Sun Microsystems Inc.)
Main-Class: hequalifies.ui.HeQualifies
Class-Path: lib/PlugIn
X-COMMENT: Main-Class will be added automatically by build
I'm having problem with lib/plugin.

Using the personal hotspot feature on the iPhone 5, I am able to connect to the internet. We also use Juniper NCP client to access our system remote. A VPN connection is created, but I am unable to access servers on our network. This works on iPhone 4.

Using the personal hotspot feature on the iPhone 5, I am able to connect to the internet. We also use Juniper NCP client to access our local system from a remote location. A VPN connection is created, but I am unable to access servers in our network. This same functionality works using my colleagues iPhone 4.
Both phones are running iOS 6.1.3. I tried to reset network settings, but still unable to ping servers in our network. This is a feature that our sales team relies heavily on when out of the office. Hoping someone has some suggestions on what is different between the 2 phones.

Hi,
Generally, this issue should be related with something called split tunneling, since you’re using a F5 vpn client, you need to look for something related to split tunneling in the F5 VPN client's documentations.
Here is an example, share it with you as a reference.
http://support.f5.com/kb/en-us/products/big-ip_apm/manuals/product/apm_config_10_2_0/apm_config_networkaccess.html
In addition, you can refer to the link below for more solution about this problem.
You Cannot Connect to the Internet After You Connect to a VPN Server
http://support.microsoft.com/kb/317025
NOTE
This
response contains a reference to a third party World Wide Web site. Microsoft is providing this information as a convenience to you.
Microsoft
does not control these sites and has not tested any software or information found on these sites.
Yolanda Zhu
TechNet Community Support

When i drag and drop an image on my site. it gives the following error. "Unable to access local files due to browser security settings. To overcome this, follo"

I am using the firefox version 17 and when i drag and drop an image on my website. It gives me the following error.
Unable to access local files due to browser security settings. To overcome this, follow these steps: (1) Enter "about:config" in the URL field; (2) Right click and select New->Boolean; (3) Enter "signed.applets.codebase_principal_support" (without the quotes) as a new preference name; (4) Click OK and try loading the file again. Or go to the homepage for a link to the tutorial on how to do it.
I have completed the above steps and it is still showing the same error message. Any help would be highly appreciated.
Thanks.

Thanks kumars ,
I have a specific drag and drop area on our website. This works fine for all earlier releases of Firefox after these security settings
"(1) Enter "about:config" in the URL field; (2) Right click and select New->Boolean; (3) Enter "signed.applets.codebase_principal_support" (without the quotes) as a new preference name; (4) Click OK and try loading the file again."
Bust these settings not work for me in Firefox 17.
Yes the drag and drop functionality is java script based and i am not using any script blocker addons.

Lightroom download wont download saying error code 42 unable to access critical file/ directory

I am trying to download the lightroom trial and get to the installation and run procedure when this error 42 appears saying unable to access critical file/ directory please try installing again.... so i have and still no joy please help

SAngye.IJ are you currently logged in under a restricted account? If not and you are logged in under an administrator account then it is likely the file permissions under your current User account have become compromised.
I would recommend reviewing your installation logs to determine the location where the file permissions have become compromised. You can find details on how to locate and interpret the installation log files at Troubleshoot install issues with log files | CC - http://helpx.adobe.com/creative-cloud/kb/troubleshoot-install-logs-cc.html.
You can also find details on how to adjust your file permissions at Error "Exit 6" or "Exit 7" | Install log | Read, write, system file errors | CS5, CS5.5 - http://helpx.adobe.com/creative-suite/kb/error-exit-6-exit-7.html.

Down load from I Pod to new computer old computer crashed unable to access old files?

My old computer crashed I purchased a new computer my I Pad was in my auto Is it possible to download my playlist and songs from the I pad to the new computer. I downed I Tunes and recovered songs from the store. I am unable to access any files from the old computer.

My old computer crashed I purchased a new computer my I Pad was in my auto Is it possible to download my playlist and songs from the I pad to the new computer. I downed I Tunes and recovered songs from the store. I am unable to access any files from the old computer.

Samsun Gusto 3 Unable to access My Verizon- Error, Network Problem, Network Unavailable

I have a new Samsung Gusto 3.
When I click on Settings- My Verizon, I get an error - Unable to access My Verizon- Error, Network Problem, Network Unavailable. My wife has a similar phone and hers works just fine.
I have had the phone now for about two weeks and the problem is still there.
John

I do not know what ‘data blocks’ are. This phone is brand new – now only two weeks old. I brought it to replace an older phone. That older phone had no problem accessing ‘My Verizon’ – so when I did a simple ‘replace’ of my old phone with the new one – everything should continue to work as before. BUT it does not access My Verizon.
That is all I know. When I bought the new phone, I just followed the prompts to transfer my account to the new one.
My plan is Basic pay as you go.
John

Not able to access Internet or Internal network via SSL AnyConnect

After connecting succesfully with Cisco AnyConnect version 3.0.05152 I am unable to access internal resources. Below is the configuration of the ASA.
Any input on the below would be appreciated
=~=~=~=~=~=~=~=~=~=~=~= PuTTY log 2014.02.04 16:15:58 =~=~=~=~=~=~=~=~=~=~=~=
sh run
: Saved
ASA Version 9.1(4)
hostname ASA
domain-name hb.local
enable password pEuUQweb2zEldXkE encrypted
xlate per-session deny tcp any4 any4
xlate per-session deny tcp any4 any6
xlate per-session deny tcp any6 any4
xlate per-session deny tcp any6 any6
xlate per-session deny udp any4 any4 eq domain
xlate per-session deny udp any4 any6 eq domain
xlate per-session deny udp any6 any4 eq domain
xlate per-session deny udp any6 any6 eq domain
passwd pEuUQweb2zEldXkE encrypted
names
ip local pool Remote_VPN_DHCP_Pool 172.16.253.100-172.16.253.150 mask 255.255.255.0
interface Ethernet0/0
description *** Internet ***
nameif publicWAN
security-level 0
ip address X.X.X.X X.X.X.X.
interface Ethernet0/1
description *** Guest Wireless Network ***
nameif guest
security-level 50
ip address 10.0.254.1 255.255.255.0
interface Ethernet0/2
description *** Uplink to Branches ***
nameif Branches
security-level 100
ip address 192.168.254.1 255.255.255.0
interface Ethernet0/3
description *** Uplink to JHA ***
nameif JHA
security-level 0
ip address 10.0.8.1 255.255.255.0
interface Management0/0
description *** Managemnet Interface - NOT USED ***
management-only
shutdown
nameif management
security-level 100
ip address 192.168.1.1 255.255.255.0
boot system disk0:/asa914-k8.bin
ftp mode passive
clock timezone CST -6
clock summer-time CDT recurring
dns domain-lookup publicWAN
dns domain-lookup guest
dns domain-lookup Branches
dns domain-lookup JHA
dns server-group DefaultDNS
name-server 172.16.1.2
domain-name hb.local
same-security-traffic permit intra-interface
object network obj_any
subnet 0.0.0.0 0.0.0.0
object network obj-10.0.0.0
subnet 10.0.0.0 255.255.255.0
object network obj_guest
subnet 10.0.254.0 255.255.255.0
object network obj-172.16.1.0
subnet 172.16.1.0 255.255.255.0
object network obj-172.16.1.5
host 172.16.1.5
object network obj-172.16.1.5-01
host 172.16.1.5
access-list Branches extended permit icmp any4 any4
access-list Branches extended permit ip any4 any4
access-list JHA extended permit ip any4 any4
access-list JHA extended permit icmp any4 any4
access-list guest extended deny ip any4 10.0.1.0 255.255.255.0
access-list guest extended deny ip any4 10.0.2.0 255.255.255.0
access-list guest extended deny ip any4 10.0.3.0 255.255.255.0
access-list guest extended deny ip any4 10.0.4.0 255.255.255.0
access-list guest extended deny ip any4 10.0.5.0 255.255.255.0
access-list guest extended deny ip any4 10.0.6.0 255.255.255.0
access-list guest extended deny ip any4 10.0.7.0 255.255.255.0
access-list guest extended deny ip any4 10.0.8.0 255.255.255.0
access-list guest extended deny ip any4 10.0.9.0 255.255.255.0
access-list guest extended deny ip any4 10.0.10.0 255.255.255.0
access-list guest extended deny ip any4 172.16.0.0 255.255.0.0
access-list guest extended permit ip any4 any4
access-list guest extended permit icmp any4 any4
access-list traffic_send_ips_module extended permit ip any4 any4
access-list outside extended permit tcp any4 host 172.16.1.5 eq https
access-list outside extended permit tcp X.X.X.X 255.255.255.0 host 172.16.1.5 eq smtp
access-list outside extended permit tcp X.X.X.X. 255.255.255.0 host 172.16.1.5 eq smtp
access-list outside extended deny ip any4 any4 log interval 30
pager lines 50
logging enable
logging timestamp
logging monitor warnings
logging buffered informational
logging trap warnings
logging asdm informational
logging queue 2048
logging device-id hostname
logging host Branches 172.16.1.80
flow-export destination Branches 172.16.1.80 2055
flow-export template timeout-rate 15
mtu publicWAN 1500
mtu guest 1500
mtu Branches 1500
mtu JHA 1500
mtu management 1500
no failover
icmp unreachable rate-limit 1 burst-size 1
icmp deny any publicWAN
asdm history enable
arp timeout 14400
no arp permit-nonconnected
object network obj_any
nat (any,publicWAN) dynamic interface
object network obj-10.0.0.0
nat (Branches,JHA) static 10.0.0.0
object network obj_guest
nat (guest,publicWAN) dynamic interface
object network obj-172.16.1.0
nat (Branches,JHA) static 172.16.1.0
object network obj-172.16.1.5
nat (Branches,publicWAN) static interface service tcp smtp smtp
object network obj-172.16.1.5-01
nat (Branches,publicWAN) static interface service tcp https https
access-group outside in interface publicWAN
access-group guest in interface guest
access-group Branches in interface Branches
access-group JHA in interface JHA
route publicWAN 0.0.0.0 0.0.0.0 X.X.X.X. 1
route Branches 10.0.0.0 255.255.0.0 192.168.254.2 1
route Branches 10.0.5.0 255.255.255.0 192.168.254.2 1
route Branches 10.28.11.0 255.255.255.0 192.168.254.2 1
route Branches 10.55.4.0 255.255.255.0 192.168.254.2 1
route Branches 10.55.6.0 255.255.255.0 192.168.254.2 1
route Branches 10.57.4.0 255.255.255.0 192.168.254.2 1
route Branches 10.57.6.0 255.255.255.0 192.168.254.2 1
route Branches 10.71.4.0 255.255.255.0 192.168.254.2 1
route Branches 10.71.6.0 255.255.255.0 192.168.254.2 1
route JHA 10.150.0.0 255.255.0.0 10.0.8.254 1
route JHA 10.251.4.0 255.255.255.0 10.0.8.254 1
route Branches 172.16.0.0 255.255.0.0 192.168.254.2 1
route Branches 172.28.0.0 255.255.0.0 192.168.254.2 1
route Branches 172.28.250.0 255.255.255.0 192.168.254.2 1
route Branches 192.9.200.0 255.255.255.0 192.168.254.2 1
route Branches 192.9.201.0 255.255.255.0 192.168.254.2 1
route Branches 192.9.220.0 255.255.255.0 192.168.254.2 1
route Branches 200.0.0.0 255.255.0.0 192.168.254.2 1
route Branches 200.0.11.0 255.255.255.0 192.168.254.2 1
timeout xlate 3:00:00
timeout pat-xlate 0:00:30
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
timeout floating-conn 0:00:00
dynamic-access-policy-record DfltAccessPolicy
webvpn
always-on-vpn profile-setting
aaa-server HB_LDAP_Group protocol ldap
aaa-server HB_LDAP_Group (Branches) host 172.16.1.2
server-port 636
ldap-base-dn CN=VPN LDAP,OU=HB Users,DC=hb,DC=local
ldap-scope subtree
ldap-naming-attribute sAMAccountName
ldap-login-password *****
ldap-login-dn VPN LDAP
ldap-over-ssl enable
user-identity default-domain LOCAL
aaa authentication ssh console LOCAL
http server enable
http 192.168.1.0 255.255.255.0 management
http 10.0.0.0 255.255.0.0 Branches
http 172.16.0.0 255.255.0.0 Branches
snmp-server host Branches 172.16.1.80 community *****
snmp-server location Seagoville
no snmp-server contact
snmp-server community *****
snmp-server enable traps snmp authentication linkup linkdown coldstart
snmp-server enable traps syslog
snmp-server enable traps ipsec start stop
snmp-server enable traps entity config-change fru-insert fru-remove
snmp-server enable traps remote-access session-threshold-exceeded
sysopt connection timewait
crypto ipsec security-association pmtu-aging infinite
crypto ca trustpool policy
telnet timeout 5
ssh scopy enable
ssh 0.0.0.0 0.0.0.0 publicWAN
ssh 10.0.0.0 255.255.0.0 Branches
ssh 172.16.0.0 255.255.0.0 Branches
ssh 192.168.1.0 255.255.255.0 management
ssh timeout 5
ssh version 2
ssh key-exchange group dh-group1-sha1
console timeout 0
dhcpd domain hb.local
dhcpd address 10.0.254.100-10.0.254.200 guest
dhcpd dns 12.127.17.72 12.127.17.73 interface guest
dhcpd enable guest
threat-detection rate acl-drop rate-interval 600 average-rate 5 burst-rate 10
threat-detection rate acl-drop rate-interval 3600 average-rate 320 burst-rate 640
threat-detection basic-threat
threat-detection statistics port
threat-detection statistics protocol
threat-detection statistics access-list
no threat-detection statistics tcp-intercept
ntp server 129.6.15.28 source publicWAN
webvpn
port 4443
enable publicWAN
enable Branches
anyconnect image disk0:/anyconnect-win-3.1.05152-k9.pkg 1
anyconnect image disk0:/anyconnect-macosx-i386-3.1.05152-k9.pkg 2
anyconnect enable
tunnel-group-list enable
group-policy DfltGrpPolicy attributes
group-policy GroupPolicy1 internal
group-policy GroupPolicy1 attributes
wins-server none
dns-server value 172.16.1.2
vpn-tunnel-protocol ikev2 ssl-client
default-domain value hb.local
split-tunnel-all-dns enable
username HBAdmin password azFWMwV/tQh/YjoW encrypted
tunnel-group Remote_VPN_Users type remote-access
tunnel-group Remote_VPN_Users general-attributes
address-pool Remote_VPN_DHCP_Pool
authentication-server-group HB_LDAP_Group LOCAL
default-group-policy GroupPolicy1
dhcp-server 172.16.1.2
tunnel-group Remote_VPN_Users webvpn-attributes
group-alias RemoteVPNUsers enable
class-map inspection_default
match default-inspection-traffic
class-map ips_module_class_map
match access-list traffic_send_ips_module
policy-map type inspect dns preset_dns_map
parameters
message-length maximum 512
policy-map global_policy
class inspection_default
inspect dns preset_dns_map
inspect ftp
inspect rsh
inspect rtsp
inspect esmtp
inspect sqlnet
inspect skinny
inspect sunrpc
inspect xdmcp
inspect sip
inspect netbios
inspect tftp
inspect http
inspect icmp
inspect ip-options
class ips_module_class_map
ips inline fail-open
service-policy global_policy global
prompt hostname context
no call-home reporting anonymous
call-home
profile CiscoTAC-1
no active
destination address http https://tools.cisco.com/its/service/oddce/services/DDCEService
destination address email [email protected]
destination transport-method http
subscribe-to-alert-group diagnostic
subscribe-to-alert-group environment
subscribe-to-alert-group inventory periodic monthly
subscribe-to-alert-group configuration periodic monthly
subscribe-to-alert-group telemetry periodic daily
Cryptochecksum:1c38a95ce10dab97ac6ad2e99823f5a2
: end
ASA# exit
Logoff

Looks like you are missing the nonat statement. Try adding the following and test (adjust the source subnet to match your needs)
object network VPN_range
range 172.16.253.100 172.16.253
nat (Branches,publicWAN) source static obj-10.0.0.0 obj-10.0.0.0 destination static VPN_range VPN_range
Please remember to rate and select a correct answer

VPN connects but unable to access resources on remote network

HI,
I'm able to ping the ASA interface once the VPN is connected but unable to access any of the resources located on the remote network such as shares and computers. The cisco vpn client shows data being sent and recieved when I ping the interface on the ASA but it doesn't recieve any data when I attempt to ping or access other resources on the network.
ASA Version 8.2(5)
hostname HOST_NAME
domain-name default.domain.invalid
names
interface Ethernet0/0
switchport access vlan 2
interface Ethernet0/1
interface Ethernet0/2
interface Ethernet0/3
speed 10
duplex half
interface Ethernet0/4
speed 100
duplex full
interface Ethernet0/5
interface Ethernet0/6
interface Ethernet0/7
interface Vlan1
nameif inside
security-level 100
ip address 10.10.8.1 255.255.255.0
interface Vlan2
nameif outside
security-level 0
ip address 12.x.x.x x.x.x.x
boot system disk0:/asa825-k8.bin
ftp mode passive
dns domain-lookup inside
dns domain-lookup outside
dns server-group DefaultDNS
name-server 10.10.8.2
domain-name default.domain.invalid
same-security-traffic permit intra-interface
object-group service Vipre tcp
port-object range 18082 18082
port-object range 18086 18086
object-group network town
network-object 192.168.0.0 255.255.0.0
access-list outside_20_cryptomap extended permit ip 10.10.8.0 255.255.255.0 192.168.0.0 255.255.252.0
access-list new extended permit ip host 192.168.0.1 any
access-list new extended permit ip any host 192.168.0.1
access-list outside_20_cryptomap_1 extended permit ip 10.10.8.0 255.255.255.0 192.168.0.0 255.255.252.0
access-list townoffice_splitTunnelAcl standard permit 10.10.8.0 255.255.255.0
access-list townremote_splitTunnelAcl standard permit 10.10.8.0 255.255.255.0
access-list outside_access_in extended permit tcp any interface outside object-group Vipre
access-list outside_access_in extended permit tcp any object-group Vipre interface inside object-group Vipre
access-list outside_access_in extended permit tcp any eq 3389 10.10.8.0 255.255.255.0 eq 3389
access-list test extended permit ip host 192.168.0.6 host 10.10.8.155
access-list test extended permit ip host 10.10.8.155 host 192.168.0.6
access-list test extended permit ip host 10.10.8.2 host 192.168.3.116
access-list test extended permit ip host 192.168.3.116 host 10.10.8.2
access-list test extended permit ip host 10.10.8.155 host 192.168.3.116
access-list bypass extended permit ip host 10.10.8.155 host 192.168.3.116
access-list bypass extended permit tcp 192.168.0.0 255.255.0.0 10.10.8.0 255.255.255.0
access-list bypass extended permit tcp 10.10.8.0 255.255.255.0 192.168.0.0 255.255.0.0
pager lines 24
logging enable
logging buffered debugging
logging asdm informational
mtu inside 1500
mtu outside 1500
ip local pool vpn 10.10.8.125-10.10.8.149 mask 255.255.255.0
icmp unreachable rate-limit 1 burst-size 1
asdm image disk0:/asdm-522.bin
no asdm history enable
arp timeout 14400
global (inside) 1 interface
global (outside) 1 interface
nat (inside) 1 192.168.0.0 255.255.0.0
nat (inside) 1 0.0.0.0 0.0.0.0
static (inside,outside) tcp interface 18082 10.10.8.2 18082 netmask 255.255.255.255
static (inside,outside) tcp interface 18086 10.10.8.2 18086 netmask 255.255.255.255
static (inside,outside) tcp interface 3389 10.10.8.2 3389 netmask 255.255.255.255
static (inside,inside) 192.168.0.0 192.168.0.0 netmask 255.255.0.0
static (inside,inside) 10.10.8.0 10.10.8.0 netmask 255.255.255.0
access-group outside_access_in in interface outside
route outside 0.0.0.0 0.0.0.0 12.70.119.65 1
route inside 192.168.0.0 255.255.0.0 10.10.8.250 1
timeout xlate 3:00:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
timeout floating-conn 0:00:00
dynamic-access-policy-record DfltAccessPolicy
aaa authentication ssh console LOCAL
aaa authentication telnet console LOCAL
http server enable
http outside
http outside
http inside
http outside
http inside
http outside
no snmp-server location
no snmp-server contact
snmp-server enable traps snmp authentication linkup linkdown coldstart
sysopt noproxyarp inside
crypto ipsec transform-set ESP-3DES-MD5 esp-3des esp-md5-hmac
crypto ipsec transform-set ESP-3DES-SHA esp-3des esp-sha-hmac
crypto ipsec security-association lifetime seconds 28800
crypto ipsec security-association lifetime kilobytes 4608000
crypto dynamic-map outside_dyn_map 20 set pfs
crypto dynamic-map outside_dyn_map 20 set transform-set ESP-3DES-SHA
crypto dynamic-map outside_dyn_map 40 set pfs
crypto dynamic-map outside_dyn_map 40 set transform-set ESP-3DES-SHA
crypto dynamic-map outside_dyn_map 60 set pfs
crypto dynamic-map outside_dyn_map 60 set transform-set ESP-3DES-SHA
crypto dynamic-map outside_dyn_map 80 set pfs
crypto dynamic-map outside_dyn_map 80 set transform-set ESP-3DES-SHA
crypto dynamic-map outside_dyn_map 100 set pfs
crypto dynamic-map outside_dyn_map 100 set transform-set ESP-3DES-SHA
crypto map outside_map 20 match address outside_20_cryptomap_1
crypto map outside_map 20 set pfs
crypto map outside_map 20 set peer 69.87.150.118
crypto map outside_map 20 set transform-set ESP-3DES-SHA ESP-3DES-MD5
crypto map outside_map 65535 ipsec-isakmp dynamic outside_dyn_map
crypto map outside_map interface outside
crypto isakmp enable outside
crypto isakmp policy 10
authentication pre-share
encryption 3des
hash md5
group 2
lifetime 86400
crypto isakmp policy 30
authentication pre-share
encryption 3des
hash sha
group 2
lifetime 86400
crypto isakmp nat-traversal 30
telnet 10.10.8.0 255.255.255.0 inside
telnet timeout 5
ssh 63.161.207.0 255.255.255.0 outside
ssh timeout 5
console timeout 0
dhcpd dns 10.8.8.2
dhcpd address 10.10.8.150-10.10.8.200 inside
dhcpd dns 10.10.8.2 interface inside
threat-detection basic-threat
threat-detection statistics access-list
no threat-detection statistics tcp-intercept
webvpn
group-policy aaa internal
group-policy aaa attributes
dns-server value 10.10.8.2 4.2.2.2
vpn-tunnel-protocol IPSec
default-domain value domainname
group-policy bbb internal
group-policy bbb attributes
wins-server value 10.10.8.2
dns-server value 10.10.8.2
vpn-tunnel-protocol IPSec l2tp-ipsec
split-tunnel-policy tunnelall
split-tunnel-network-list value townoffice_splitTunnelAcl
default-domain value domainname.local
group-policy townremote internal
group-policy townremote attributes
wins-server value 10.10.8.2
dns-server value 10.10.8.2 4.2.2.2
vpn-tunnel-protocol IPSec
split-tunnel-policy tunnelspecified
split-tunnel-network-list value townremote_splitTunnelAcl
default-domain value domainanme
group-policy remote internal
group-policy remote attributes
wins-server value 10.10.8.2
dns-server value 10.10.8.2
vpn-tunnel-protocol IPSec
split-tunnel-policy tunnelspecified
split-tunnel-network-list value townremote_splitTunnelAcl
default-domain value dksecurity.local
address-pools value vpn
username xxxx password . encrypted privilege 15
username xxxx attributes
vpn-group-policy dksecurityremote
username xxx password encrypted privilege 15
username xxx attributes
vpn-group-policy dksecurityremote
username xxxx password . encrypted privilege 15
username xxx password encrypted privilege 15
username xxx attributes
vpn-group-policy dksecurityremote
username xxx password encrypted privilege 15
username xxxx attributes
vpn-group-policy dksecurityremote
username xxx password encrypted privilege 15
username xxx attributes
vpn-group-policy dksecurityremote
username xxx password encrypted privilege 15
username xxx attributes
vpn-group-policy dksecurityremote
username xxx password encrypted privilege 15
username xxx password encrypted privilege 15
username xxxx attributes
vpn-group-policy remote
username xxx password encrypted privilege 15
username xxx attributes
vpn-group-policy remote
username xxx password encrypted privilege 15
username xxx attributes
vpn-group-policy remote
username xxxx password encrypted privilege 15
username xxx password encrypted privilege 15
username xxx attributes
vpn-group-policy remote
tunnel-group 69.87.150.118 type ipsec-l2l
tunnel-group 69.87.150.118 ipsec-attributes
pre-shared-key *****
tunnel-group remote type remote-access
tunnel-group remote general-attributes
address-pool vpn
default-group-policy townremote
tunnel-group townremote ipsec-attributes
pre-shared-key *****
isakmp keepalive disable
tunnel-group townremote type remote-access
tunnel-group townremote general-attributes
address-pool vpn
default-group-policy townremote
tunnel-group lansingremote ipsec-attributes
pre-shared-key *****
class-map tcp-bypass
match access-list bypass
class-map test
match access-list new
class-map inspection_default
match default-inspection-traffic
policy-map type inspect dns preset_dns_map
parameters
message-length maximum 512
no dns-guard
no protocol-enforcement
no nat-rewrite
policy-map global_policy
class test
class inspection_default
policy-map tcp
class tcp-bypass
set connection random-sequence-number disable
set connection advanced-options tcp-state-bypass
service-policy global_policy global
service-policy tcp interface inside
prompt hostname context
call-home reporting anonymous prompt 2
call-home
profile CiscoTAC-1
no active
destination address http https://tools.cisco.com/its/service/oddce/services/DDCEService
destination address email [email protected]
destination transport-method http
subscribe-to-alert-group diagnostic
subscribe-to-alert-group environment
subscribe-to-alert-group inventory periodic monthly
subscribe-to-alert-group configuration periodic monthly
subscribe-to-alert-group telemetry periodic daily
Cryptochecksum:c724d6744097760d94a7dcc79c39568a
: end

You need to change the VPN pool ip subnet to something other than the same ip range used on the inside interface.
Sent from Cisco Technical Support iPad App

Unable to access server files shares with Active Directory Users

Quick breakdown of my issue.
I have setup a Yosemite file server running the latest version of Yosemite and Server.
File sharing in Server.app is enabled and shares have been created
The server is bound to my company's Active Directory and you can directly login to the computer via AD credentials.
The big issue is this, unless the user has directly walked up to my server and logged into it at least once, they cannot authenticate to the file shares via their AD credentials.
For example: Administrator (me) I can login and access all file shares without issue.
Jane Smith (SMITH) who has actually walked up to my server and logged in via her AD credentials, can also access all file shares. (That she has access to)
John Doe (JDOE) who has not logged into the server in anyway, cannot authenticate to the server file shares at all (even though I have granted him permission) He just gets an "Access Denied" message.
I have gone into Directory Utility and changed the search order to give AD priority and this still doesn't resolve the problem.
We have unbound the server from AD and added in back again and still not able to resolve.
If you open Server.app and go to add someone from AD to a file share, it finds the AD user quickly and everything looks right. but still unable to authenticate to the server if they haven't directly logged into it before?
All of the documentation and google articles I have found say my server is setup correctly, any help would be greatly appreciate it!
Thanks in advance!

I figured this out. In Mountain Lion Server, it doesn't matter if you give the user rights to a shared file or folder, if the user doesn't have access the File Sharing service, they can't get it. I had to find the specific users in the Server app under the AD in the Users tab, and give them rights to the File Sharing service. I think you can do this for a whole AD group as well, but I haven't tried.

Unable to access website using home network but able to access using school network.

Hi, I'm currently on a MacBook Pro running OS X Mountain Lion and Safari v6.0.4.
As per the title, I'm unable to access particular websites, namely abduzeedo.com and fromupnorth.com, using my home network but when I try to access using my school network, I can access it freely.
The error message I get is: "Safari can't open the page [website] because the server where this page is located isn't responding"
I've tried clearing my cache, resetting my IP, deleting the library file (or whatever it was that some people suggested in forums) but it still doesn't work ):
Any suggestions?

Please read this whole message before doing anything.
This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
Step 1
The purpose of this step is to determine whether the problem is localized to your user account.
Enable guest logins* and log in as Guest. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
While logged in as Guest, you won’t have access to any of your personal files or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
Test while logged in as Guest. Same problem?
After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
*Note: If you’ve activated “Find My Mac” or FileVault, then you can’t enable the Guest account. The “Guest User” login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.
Step 2
The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login, or by a peripheral device.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including Wi-Fi on certain iMacs. The next normal boot may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of steps 1 and 2.

Unable to see the file share content via UNC path

I have run a cmd command to modify the NTFS permissions on a few home directories.
That command has helped me to remove all from the ACL of shared folders; and add domain admins into it.
I am an admin on that Windows server. Now, whenever I try to access any home directory via UNC path; it doesn't displays the files and folders in it. But, if I go to the server and try to open the particular home directory from there...first it gives me
a prompt that I currently do not have access on folder and then gives me an option to click on continue and then I can access the files and folders within the directory.
I am also able to see the files and folders in the directory via UNC path after doing the above steps.
Can somebody help me understand what I did wrong here and how can this be resolved now?

Sorry, am added into local administratir group. But, NTFS permissions shows that I have only "read" and "change" permissions (I have checked this from effective permissions).
The ACL of folder shows only "Domain Admins" have full access and I am not a part of AD group "Domain Admins". I think this is the root cause of the issue.
I am running below mentioned command to give myself full access on the file shares without making any changes to the current ACL of all shared folders. However, it is not working and not even throwing any error message.
for /f %i in (u:\users.txt) do cacls \\hdfile01\users$\%i /C /G "AMadm":F
users.txt contains 'cn'. Another thing to notice here is that if I just keep one ID in .txt file and then run my command; it is working. But its not running for all users in loop.
Can somebody please help.

Unable to access media files on network via wirele...

Similar Messages

Maybe you are looking for