File Name and Target Directory name issue in FTP CC

Hi All ,
I am using following code to assing file name and directory name in UDF. I don;t want these parameters to be part of my target structure. Since i have created these files names in UDF, what are the values do i need to mention in FTP CC's "File access Parameter" which are mandatory fiels in CC ?
DynamicConfiguration conf = (DynamicConfiguration) container.getTransformationParameters().get(StreamTransformationConstants.DYNAMIC_CONFIGURATION);
DynamicConfigurationKey key = DynamicConfigurationKey.create(u201Chttp://sap.com/xi/XI/System/Fileu201D,u201CFileNameu201D);
String myFileName =biz +".dat";
conf.put(key, myFileName);
//Similar code for direcotry
Thanks for your support.
MK

Hi,
in ID in receiver file comm channel, just tick the option of Adapter Specific messge attributes and in it tick FileName and DirectoryName.............
the filename and directory you give in comm channel will be treated as dummy and the values will be taken from your UDF.......
Regards,
Rajeev Gupta

Similar Messages

How to find out the Target Component name and Target view name

Hi All Expert,
                  I want to know ,how to find out the target component and target view in WEB UI,when i click on a field which shows as a hyper link in WEB UI .At GUI level ,i know the how it will work.Any way to find out the component name and view name which is show the details of that field at GUI level .IF you go to transaction CRMD_ORDER then open the service contract id .then goto the item level value .there is 1 service data tab is available at item level.there is two button is available.first one is available time and second one is response time .if i click on any button then one popup is open which is shows the details of that button.I dont know how to find out the component name and view name from GUI level.
Thanks in Advance....
Vishwas Sahu

Hi Vishwa,
             The control would be something like this for navigation in Get_p_xxx method u mention as link and u mention a event name which gets triggered on the click of this hyperlink. So your GET_P_XXX method would have the following code:
CASE iv_property.
    WHEN if_bsp_wd_model_setter_getter=>fp_fieldtype.
      rv_value = cl_bsp_dlc_view_descriptor=>field_type_event_link.
    WHEN if_bsp_wd_model_setter_getter=>fp_onclick.
      rv_value = 'EXAMPLE'.
Now you have to create a method as EH_ONEXAMPLE at your IMPL class and within which you would give an outbound plug method. Within the outbound plug the target data would be filled in the collection and window outbound plug would be triggered.
This is a huge topic and i have just mentioned you basic things.
Regards,
Bharathy.

User account name and home directory name do not match

A month ago I bought the latest iMac and used Migration assistant to migrate all of my data on over.
Everything went well... Except that my new iMac would not let me use my old user name. I had to create somethign else.
So my user (admin) account name is not the same as my Home directory name. (I only have 1 user account and 1 user Home directory... they both are named differently).
This has not caused problems, but I want to iron this out. I tried using System Preferences/Users and groups to change my user account name to match the name of my home directory name (which has my old user name)... but when I did that it said "Name not available".
Long time Mac user but I'm not comfortable doing anything deeper without some input & advice.
Thanks in advance!

I enable the Root user as outlined in the Apple Way instructions...logged out and loged in as the rooot user... but I really don't want to change the name of my user directory... That's the name I want to keep as a User.
Even logged in as a Root User...
I tried to change my current User Name to match by directory name, but it said Name is Not Available
I also tried to create a new User name that matches my directory name...same results Name is Not Available
Is there a sudo entry that will change the User to match my Directory name (which I want to keep and use)?
Thank in advance!

How to change the "short name (account name?)" and home directory name?

Hi,
I recently purchased a new iMac and migrated account info from my MacBook Pro. I happened to use random account name during migration without knowing it will not be easy to change the short name (account name?) and home directory name. As a result, I am now having extremely confusing short name and home directory name on my new iMac.
I did online search to find out how to change the two names, but I could only found somethig like "enabiling root user and....." I have no idea what it was talking about and I don't want to take risk altering such advance set up manually.
Please advice how I can change the short name and home directory name safely without much PC knowledge.
Thank you very much in advance.

There are a few ways of doing this. The easiest method is logging into the first account and copying everything to an external drive (or flash drive or whatever), which changes the permissions so that others can see the files.
Then, login with the new account and copy the files over. Once they are copied, the correct permissions will be applied again (so other people on your computer can't access them).
If you can't do this method for one reason or other, you can do some terminal commands to change the ownership of the files. Login to the new account. If it is an admin account, open terminal and type the following command:
sudo chown -R -v yourusername:admin /Users/originalaccountnamehere
That should change the ownership of the files from your old account to the new one. At that point, you can simply drag the files into place.

Changed shortname and home directory name and don't know how to set it back

so i changed my short name and home directory name because i bought the macbook used and i was trying to rename it to my name.
Like all the others now the desktops back to default without any of my files/music, i know its still here its in the old account folder how do i just reverse this so i can have my desktop and everything back.
heres what it is like:
my users folder there is a home icon called "Josh" which is my name, then there is a folder icon called "nick" which is the old name and it contains all my files etc. then a shared folder icon.
what do i do?
p.s. i tried the method of adding "_new" onto the home icon called Josh and it said i couldn't change it because its part of Mac OS X or something...

if you bought a used computer the first thing you should do is reformat the hard drive and reinstall the OS. anything else is less than prudent. it will also let you name your computer and your user as you like.

Source and target directory file name should be same

Hi,
How can i generate the same file name in target directory without date and Timestamp.
for eg., Source File name : yeswanth.txt
and target File name also : yeswanth.txt
Note : here source side the file yeswanth.txt is constant and whenever it moves to target directory...should be overwrite.
Reward points for useful answers.
Thanks & Regards,
yeswanth.

Hi Mugdhal,
am getting this error when i sent the same file again.
Message processing failed. Cause: com.sap.aii.af.ra.ms.api.RecoverableException:
Yeswanth.txt: Cannot create a file when that file already exists. : com.sap.aii.adapter.file.ftp.FTPEx: 550
Yeswanth.txt: Cannot create a file when that file already exists.
But, here it should be overwrite the existing file.
Regards,
Yeswanth.

SharePoint 2010, Visual Studio 2010, Packaging a solution - The specified path, file name, or both are too long. The fully qualified file name must be less than 260 characters, and the directory name must be less than 248 characters.

Hi,
I have a solution that used to contain one SharePoint 2010 project. The project is named along the following lines:
<Company>.<Product>.SharePoint - let's call it Project1 for future reference. It contains a number of features which have been named according
to their purpose, some are reasonably long and the paths fairly deep. As far as I am concerned we are using sensible namespaces and these reflect our company policy of "doing things properly".
I first encountered the following error message when packaging the aforementioned SharePoint project into a wsp:
"The specified path, file name, or both are too long. The fully qualified file name must be less than 260 characters, and the directory name must be less than 248 characters."
I went through a great deal of pain in trying to rename the project, shorten feature names and namespaces etc... until I got it working. I then went about gradually
renaming everything until eventually I had what I started with, and it all worked. So I was none the wiser...not ideal, but I needed to get on and had tight delivery timelines.
Recently we wanted to add another SharePoint project so that we could move some of our core functinality out into a separate SharePoint solution - e.g. custom workflow
error logging. So we created another project in Visual Studio called:
<Company>.<Product>.SharePoint.<Subsystem> - let's call it Project2 for future reference
And this is when the error has come back and bitten me! The scenario is now as follows:
1. project1 packages and deploys successfully with long feature names and deep paths.
2. project2 does not package and has no features in it at all. The project2 name is 13 characters longer than project1
I am convinced this is a bug with Visual Studio and/or the Package MSBuild target. Why? Let me explain my findings so far:
1. By doing the following I can get project2 to package
In Visual Studio 2010 show all files of project2, delete the obj, bin, pkg, pkgobj folders.
Clean the solution
Shut down Visual Studio 2010
Open Visual Studio 2010
Rebuild the solution
Package the project2
et voila the package is generated!
This demonstrates that the package error message is in fact inaccurate and that it can create the package, it just needs a little help, since Visual Studio seems to
no longer be hanging onto something.
Clearly this is fine for a small time project, but try doing this in an environment where we use Continuous Integration, Unit Testing and automatic deployment of SharePoint
solutions on a Build Server using automated builds.
2. I have created another project3 which has a ludicrously long name, this packages fine and also has no features contained within it.
3. I have looked at the length of the path under the pkg folder for project1 and it is large in comparison to the one that is generated for project2, that is when it
does successfully package using the method outlined in 1. above. This is strange since project1 packages and project2 does not.
4. If I attempt to add project2 to my command line build using MSBuild then it fails to package and when I then open up Visual Studio and attempt to package project2
from the Visual Studio UI then it fails with the path too long error message, until I go through the steps outlined in 1. above to get it to package.
5. DebugView shows nothing useful during the build and packaging of the project.
6. The error seems to occur in
CreateSharePointProjectService target called at line 365 of
Microsoft.VisualStudio.SharePoint.targetsCurrently I am at a loss to work out why this is happening? My next task is to delete
project2 completely and recreate it and introduce it into my Visual Studio solution.
Microsoft, can you confirm whether this is a known issue and whether others have encountered this issue? Is it resolved in a hotfix?
Anybody else, can you confirm whether you have come up with a solution to this issue? When I mean a solution I mean one that does not mean that I have to rename my namespaces,
project etc... and is actually workable in a meaningful Visual Studio solution.

Hi
Yes, I thought I had fixed this my moving my solution from the usual documents to
c:\v2010\projectsOverflow\DetailedProjectTimeline
This builds ok, but when I come to package I get the lovely error:
Error 2 The specified path, file name, or both are too long. The fully qualified file name must be less than 260 characters, and the directory name must be less than 248 characters. C:\VS2010\ProjectsOverflow\DetailedProjectTimeline\VisualDetailedProjectTimelineWebPart\Features\Feature1\Feature1.feature VisualDetailedProjectTimeline
Now, the error seems to be related to
Can anyone suggest what might be causing this. Probably some path in an XML file somewhere. Here is my prime suspect!
<metaData>
<type name="VisualDetailedProjectTimelineWebPart.VisualProjectTimelineWebPart.VisualProjectTimeline, $SharePoint.Project.AssemblyFullName$" />
<importErrorMessage>$Resources:core,ImportErrorMessage;</importErrorMessage>
</metaData>
<data>
<properties>
<property name="Title" type="string">VisualProjectTimelineWebPart</property>
<property name="Description" type="string">My Visual WebPart</property>
</properties>
</data>
</webPart>
</webParts>
.... Unless I can solve this I will have to remove the project and recreate but with simple paths. Tho I will be none the wiser if I come across this again.
Daniel

Unable to convert the file name in Target directory

Dear Experts,
Currently iam facing a problem with some files.my interface is a File to file .As per the interface the sender will pick the flatfiles from source directory which the file name was BNP_NE201.txt once my file reached to target directory the name of the file willrenamed as VENDOR_Payment.NE201 automatically for this they have done some OS level script in receiver communication channel of the first interface which we have added "un operating system command after message processing" in processing parameters tab.again one more sender comm channel wil pick the file from first target directory which is having naming convesion of "VENDOR_Payment.NE201 " and post it to target. all the two interfaces are file to file (NFS) . for a parctuclar day files has been posted to 1 st target directory and the receiver communication channel is not yet convert the file names bcz of that the second communication channel can't able to pick the files from target directory. for some times that is working fine and some times it is unable to convert.
from our side i check every thing .could you please suggest me the way to approch
Reagrs,
Kiran tanuku

>> for a parctuclar day files has been posted to 1 st target directory and the receiver communication channel is not yet convert the file names bcz of that the second communication channel can't able to pick the files from target directory. for some times that is working fine and some times it is unable to convert.
You need to wait until the file is converted. After when it is converted then the second interface sender communication channel will pick the files.
What do u mean by unable to convert?
Is it unable to do the content conversion? if so then check the data as you said that it sometimes it works fine.
> The best approach is to change the name of the file in the receiver communciation channel instead of using a script.
Thanks,

Get-ChildItem : The specified path, file name, or both are too long. The fully qualified file name must be less than 260 characters, and the directory name must be less than 248 characters.

Hi, Im trying to get the whole path in my server, so i tried that with this following code
Get-ChildItem $sourceFolder -Recurse | ?{$_.PsIsContainer} |Get-Acl
But then, it showed me somtehing like this :
Get-ChildItem : The specified path, file name, or both are too long. The fully qualified file name must be less than 260 characters, and the directory name must be less than 248 characters.
I tried to find the solver everywhere and mostly they propose to change the path name, which is impossible, since I am working with my company server, and those folder have already there before i start to work here, then the other ask me to use robocopy,
but all of the trick just dont work
is there any way to solve this problem? thanks

There is no simple solution to this. And it is not a limitation of powershell itself, but of the underlying NTFS file system.
If the problem is that a folder with a name longer than 248 exists anywhere within your directory structure, you are hooped.
If the problem is that some fully qualified path names exceed 260 characters, then, in those cases, the solution already given is to create a psdrive partway up the path from the drive letter or server/share root of the path. Unfortunately, the output produced
will be relative to that psdrive and not to what is specified as the $sourcefolder.
unless you already know where those problematic paths are, you might consider trying to trap those errors and have your script figure out where it needs to create psdrives. You might then be able to calculate the equivalent path for each file or folder and
output that. the programming effort would be simpler to just created a psdrive for each folder encountered, however I expect that would be very inefficient.
Al Dunbar -- remember to 'mark or propose as answer' or 'vote as helpful' as appropriate.

File to file scenario..............file lost if target directory incorrect?

hi forum experts,
i have a file to file scceanrio....without BPM....
there is only one mapping ...in the receiver determination......
the problem is........
when in the receiver communication channel....in the <target directory>....i give something absurd.....e.g. '-', the file cant be put to the desired directory...
and the file is lost.............moreover nowhere in the rwb i can see what the error is.......in rwb it shows file delivered successfully........
now how can i retrive the lost messgae.....how can i resend the message from rwb or MDT............
is it possible from MDT to resend the message payload again????
pls help

Dhar,
Is this is development or production? Also why you have given the target direcotry as '-' ? Is this your requirement?
Anyway you can post the same message once again from RWB. Since it is file to file scenario you can post from RWB.
Go to sxmb_moni and open your message. From the source payload right click and select view source. Then copy this payload and go to RWD ---> Adapter Engine ---> Test Message ---> Here you give your Source business system, Target business sytem and all the parameters. Also you paste the payload here. Also give your user name and password and select Quality of service BE. Then send the message. You will see a new message in sxmb_moni.
Also would recommend to give a name for target directory.
Check this weblog for some help on this:
/people/michal.krawczyk2/blog/2005/08/25/xi-sending-a-message-without-the-use-of-an-adapter-not-possible
/people/michal.krawczyk2/blog/2005/09/16/xi-how-to-test-your-mapping-in-real-life-scenarios
---Satish

What is the key column name and value column name in JDBC Adapter parameter

Hi
Can any one please tell me what is the Key Column Name and Key Column Value in JDBC adatper parameters. If i dont mention those parameters i am getting the following error
<b> Value missing for mandatory configuration attribute tableEOColumnNameId</b>
Please help me
Best Regards
Ravi Shankar B

Hi
I am doing DataBase Lookup in XI
First i have created a Table in Database( CheckUser) which has two fields UserName and PhoneNumber and then i have created
I have created one Communication Channel For Reciever Adapter .
I have given the parameters like this
JDBC Driver : com.microsoft.jdbc.sqlserver.SQLServerDriver
Connection : jdbc:microsoft:sqlserver://10.7.1.43:1433;DatabaseName=Ravi;
UserName.... sa
password.... sa
persistence : Database
Database Table Name : CheckUser
Key column name and Value column name i left blank and activated
and then
I have created
Data Types : Source ...... UserName
                  Destination.... PhoneNumber
Message Types
Message Interfaces
In Message Mapping
              I have created one User Defined function DBProcessing_SpecialAPI().This method will get the data from the database....
In this function i have written the following code
   //write your code here
String query = " ";
Channel channel = null;
DataBaseAccessor accessor = null;
DataBaseResult resultSet = null;
query = "select Password from CheckUser where UserName = ' " +UserName[0]+ " ' ";
try {
     channel = LookupService.getChannel("Ravi","CC_JDBC");
     accessor = LookupService.getDataBaseAccessor(channel);
     resultSet = accessor.execute(query);
     for(Iterator rows = resultSet.getRows();rows.hasNext();){
          Map rowMap = (Map)rows.next();
          result.addValue((String)rowMap.get("Password"));
catch(Exception e){
     result.addValue(e.getMessage());
finally{
     try{
          if(accessor != null)
               accessor.close();
     }catch(Exception e){
          result.addValue(e.getMessage());
And the i have mapped like this
UserName -
> DBProcessing_SpecialAPI----
>PhoneNumber
when i am testing this mapping i am getting the following error
<?xml version="1.0" encoding="UTF-8"?>
<ns0:Dest_JDBC_MT xmlns:ns0="http://filetofilescenario.com/ilg"><phoneNumber>Plain exception:Problem when calling an adapter by using communication channel CC_JDBC (Party: , Service: Ravi, Object ID: c360bc139a403293afbc49d5c46e4478) Check whether the communication channel exists in the Integration Directory; also check the cache notifications for the instance Integration Server (central Adapter-Engine) Channel object with Id Channel:c360bc139a403293afbc49d5c46e4478 not available in CPA Cache.
com.sap.aii.mapping.lookup.LookupException: Problem when calling an adapter by using communication channel CC_JDBC (Party: , Service: Ravi, Object ID: c360bc139a403293afbc49d5c46e4478) Check whether the communication channel exists in the Integration Directory; also check the cache notifications for the instance Integration Server (central Adapter-Engine) Channel object with Id Channel:c360bc139a403293afbc49d5c46e4478 not available in CPA Cache.
     at com.sap.aii.ibrun.server.lookup.AdapterProxyLocal.<init>(AdapterProxyLocal.java:61)
     at com.sap.aii.ibrun.server.lookup.SystemAccessorInternal.getProxy(SystemAccessorInternal.java:98)
     at com.sap.aii.ibrun.server.lookup.SystemAccessorInternal.<init>(SystemAccessorInternal.java:38)
     at com.sap.aii.ibrun.server.lookup.SystemAccessorHmiServer.getConnection(SystemAccessorHmiServer.java:270)
     at com.sap.aii.ibrun.server.lookup.SystemAccessorHmiServer.process(SystemAccessorHmiServer.java:70)
     at com.sap.aii.utilxi.hmis.server.HmisServiceImpl.invokeMethod(HmisServiceImpl.java:169)
     at com.sap.aii.utilxi.hmis.server.HmisServer.process(HmisServer.java:178)
     at com.sap.aii.utilxi.hmis.web.HmisServletImpl.processRequestByHmiServer(HmisServletImpl.java:296)
     at com.sap.aii.utilxi.hmis.web.HmisServletImpl.processRequestByHmiServer(HmisServletImpl.java:211)
     at com.sap.aii.utilxi.hmis.web.workers.HmisInternalClient.doWork(HmisInternalClient.java:70)
     at com.sap.aii.utilxi.hmis.web.HmisServletImpl.doWork(HmisServletImpl.java:496)
     at com.sap.aii.utilxi.hmis.web.HmisServletImpl.doPost(HmisServletImpl.java:634)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:390)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:264)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:347)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:325)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:887)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:241)
     at com.sap.engine.services.httpserver.server.Client.handle(Client.java:92)
     at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:148)
     at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
     at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
     at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
     at java.security.AccessController.doPrivileged(Native Method)
     at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
     at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
</phoneNumber></ns0:Dest_JDBC_MT>
In RWB i have checked the status of JDBC driver its showing the following error
<b>Value missing for mandatory configuration attribute tableEOColumnNameId</b>
Best Regards
Ravi Shankar B
Message was edited by:
        RaviShankar B

How to find output type givenSapscript form name and print program name

Hi Experts,
Can anyone tell me how to find the output type of a sapscript form if the print program name and sapscript form name is
known.

Hi,
There are two ways:
1. Use table TNAPR .. Here is table give PGNAM as your print program name and FONAM as form name.. Now the field KSCHL will be the output type assigned to your script.
2. You can also check the NACE t-code.. In that select a application(Corresponds to your area) -> click on Output types tab -> Here you get list of output type.. You need click on Processing Routine folder to get all other info..

Can I use firefox in webview? what is the package name and the activity name?

Can I use firefox in webview? what is the package name and the activity name?
I saw : intent.setClassName("com.tencent.mtt", "com.tencent.mtt.MainActivity");
but what is the name for firefox?

rahulmcadit wrote:
The phone is from UK and the carrier on which phone has been locked is "ORANGE". I want to use the same phone in India. I want to unlock the phone. Can you please suggest me what is the procedure to unlock the phone. How can I pay the amount to ORANGE carrier and can use my iphone in India.
Contact ORANGE to unlock it.
See this -> http://support.apple.com/kb/HT5014

My brother gave me his old ipod how do I remove his name and put my name on it so itunes will reconignes me

My brother gave me his classic ipod, how do I remove his name and put my name so my itunes will recognize my computer?

Hello Darryll,
Welcome to the Apple Support Communities. If you want to change the name of the iPod, the following article assist with getting that setup for you.
iTunes 11: Frequently used features
http://support.apple.com/kb/HT5649
Then you can change the name and sync the ipod with your library
iTunes and iOS: Change the name of your iPhone, iPad, or iPod
http://support.apple.com/kb/ht3965
Connect your device and open iTunes.
In the source list (the left-hand column of iTunes), double-click the name of your device.
Type the new name for your device and press Return on the keyboard.
Sync the device (press Sync in the bottom right corner of the screen).
Regards,
-Norm G.

How can I find the specific channel name and modify channel name in automatically in VBS?

How can I find the specific channel name and modify channel name in automatically in VBS? (DIAdem 9.1)
I would like to change channel name = "speed01" ... "speed10" to channel name = "velocity01"..."velocity10.
martino

Hello Martino,
this script will help:
Option Explicit
Dim i
Dim n
For i=1 To 10
If i < 10 then
n = CNo("speed0" & i)
Else
n = CNo("speed" & i)
End If
If n > 0 Then
If i < 10 then
ChnName(n) = "velocitiy0" & i
Else
ChnName(n) = "velocitiy" & i
End If
End If
Next
Matthias
Matthias Alleweldt
Project Engineer / Projektingenieur
Twigeater?

File Name and Target Directory name issue in FTP CC

Similar Messages

Maybe you are looking for