File name based routing

Hello All,
Here I have a scenario where based on the source file name PI should route it to corresponding Business system.
There is no IR part as it is a pass through Interface. Instead of creating multiple channels can I check the condition(file name based condition) at Receiver determination level in ID part?
Thanks,
Regards,
Moorthy

Hello,
There is no IR part as it is a pass through Interface. Instead of creating multiple channels can I check the condition(file name based condition) at Receiver determination level in ID part?
Yes, you can use context objects and then select fileName, I'm not sure if you'll be able to use the extended xpath conditions. Probably that approach is limited to the approximately equals, equals, not equals condition.
Corrections are welcome
Hope this helps,
Mark

Similar Messages

File name based routing in Receiver determination

Hi experts,
I have a requirement to do receiver determination based on file names which are dynamic.To put it clearely, i will be having two files in my source File location and i need to route it based on the file name to two target systems.
The file name are like Month(changes everymonth)_TargetSys1 and month_targetSys2.
I dont need any conversions ,so i am not using any IR objects.
To pick files i kept *.txt in sender channel, and in receiver determination condition i was trying to use context object called 'Filename'.But it doesnt work asthe file name changes every month.
Is there any option to take substring from the input file name (say targetSys2 from month_targetSys2.) and put it as a condition for receiver determination.
There is not DT or structure of the incoming file , as there are no modification to be done with the content.
Regards,
Anika

you need to have the structure in case you want to route it via the xpath.
Else another option is to code the enhanced receiver determination and using a java mapping with dynamic configuration read the filename and then dynamically create the receiver determination.
http://help.sap.com/saphelp_nw04/helpdata/en/43/a5f2066340332de10000000a11466f/content.htm

How can I auto export a PDF File using the "Smallest File Size" preset and set the Exported File Name based on information from an Imported PDF?

Greetings all,
I am trying to create a script to automate a PDF export process for my company for inDesign. I’m fairly new to inDesign itself and have no previous experience with javascript, although I did take C++ in high school and have found it helpful in putting this code together.
We have an inDesign template file and then use the Multi-page PDF importer script to import PDF files. We then have to export two version of each file that we import, then delete the imported file and all of the pages to reset the template. This has to be done for nearly 1000 pdf files each month and is quite tedious. I’m working on automating the process as much as possible. I’ve managed to piece together code that will cleanup the file much quicker and am now trying to automate the PDF exports themselves.
The files are sent to us as “TRUGLY#####_Client” and need to be exported as “POP#####_Client_Date-Range_North/South.pdf”
For example, TRUGLY12345_Client needs to be exported as POP12345_Client_Mar01-Mar31_North and POP12345_Client_Mar01-Mar31_South.
There are two templates built into the template file for the north and south file that are toggled easily via layer visibility switches. I need to get a code that can ideally read the #s from the imported Trugly file as well as the Client and input those into variables to use when exporting. The date range is found in the same place in the top right of each pdf file. I am not sure if this can be read somehow or if it will have to be input manually. I can put North or South into the file name based on which template layer is visible.
I am not sure how to go about doing this. I did find the following code for exporting to PDF with preset but it requires me to select a preset and then type the full file name. How can I set it to automatically use the “Smallest File Size” preset without prompting me to choose and then automatically input some or preferably all of the file name automatically? (If the entire filename is possible then I don’t even want a prompt to appear so it will be fully automated!)
PDF Export Code (Originally from here: Simple PDF Export with Preset selection | IndiSnip [InDesign® Snippets]):
var myPresets = app.pdfExportPresets.everyItem().name;
myPresets.unshift("- Select Preset -");
var myWin = new Window('dialog', 'PDF Export Presets');
myWin.orientation = 'row';
with(myWin){
    myWin.sText = add('statictext', undefined, 'Select PDF Export preset:');
    myWin.myPDFExport = add('dropdownlist',undefined,undefined,{items:myPresets});
    myWin.myPDFExport.selection = 0;
    myWin.btnOK = add('button', undefined, 'OK');
myWin.center();
var myWindow = myWin.show();
if(myWindow == true && myWin.myPDFExport.selection.index != 0){
    var myPreset = app.pdfExportPresets.item(String(myWin.myPDFExport.selection));
    myFile = File(File.saveDialog("Save file with preset: " + myPreset.name,"PDF files: *.pdf"));
    if(myFile != null){
        app.activeDocument.exportFile(ExportFormat.PDF_TYPE, myFile, false, myPreset);
    }else{
        alert("No File selected");
}else{
    alert("No PDF Preset selected");
So far my code does the following:
1) Runs the Multi-Page PDF Import Script
2) Runs PDF Export Script Above
3) Toggles the Template
4) Runs #2 Again
5) Deletes the imported PDF and all pages and toggles template again.
It’s close and much better than the original process which was almost 100% manual but I’d like to remove the Preset prompt from the PDF script and have it automatically select the “Smallest File Size” preset. and then if there’s a way to have it auto-fill in the file name so no user input is required at all other than selecting each file to import. (If there’s a way to setup a batch action for the multi-import script that would be even better!)
Thanks in advance and if there’s anything else I can provide that would help please let me know! Even a nudge in the right direction will be a big help!

If you hold down the option key, it will typically show the location. Or you can often hit option-return on the file and it will reveal the file in the Finder, instead of opening it.
Final option is to open it, and just option-click the filename in the toolbar of Preview and it should show you the location.
It's probably an attachment to an email you've received. If you have Mail set to cache emails and their attachments it'll be stashed in a subdirectory of ~/Library/Mail. Which is fine.

Name based routing capab

Hi there, I"m new to the forums and I'm looking for routers capable of name based routing. Does Cisco provide any routers that have that capability? Essentially what I'm looking for is a router with a built-in functionality similar to virtual hosting by Apache.
Any suggestions are appreciated

Bennet,
Nothing in the Small Business Product Line , I'm sure they have something under the Enterprise group line.
You can post under the Enterprise support forum or call a Cisco representative @ 1-800-553-6387
Thanks,
Jasbryan

File Based logging: Control file name based on calling service

In the file logging, I need to change the "Prefix" and "Suffix" that I can type in, from page "FILE Transport Configuration" while creating
business service with transfort: File. I need to be able to supply these values for the file name from proxy service activity.
I am creating as logging proxy service which will be called from all the other proxy services. I am planning to use logging to File System based on
BS for achieving this. I need to be able to create a new file with name that corresponds to the calling service. How can I achieve this?
Also this service should be able to turn logging on or off based on the calling service. I should be able to turn off the logging completely or
turn off the logging only for few services.
What is the best way to achieve this?

HI
That means your file name would be decided at run time . so u can use adapter specific mesage attributes in ur communication channel
please refer tto the same here
/people/william.li/blog/2006/04/18/dynamic-configuration-of-some-communication-channel-parameters-using-message-mapping
Dynamic File Name Part 1
/people/jayakrishnan.nair/blog/2005/06/20/dynamic-file-name-using-xi-30-sp12-part--i
Dynamic File Name Part 2
/people/jayakrishnan.nair/blog/2005/06/28/dynamic-file-namexslt-mapping-with-java-enhancement-using-xi-30-sp12-part-ii

File Name based on Field Entry

Based on Adobe Acrobat SDK document "Javascript for Acrobat API Reference": Pg 146 I have been able to get the trusted function to work and save a file to a particular path with a non-dynamic name. However I have yet to figure out why the document will not save the field entry I specify as the file name.
http://www.adobe.com/content/dam/Adobe/en/devnet/acrobat/pdfs/js_api_reference.pdf
Pg 146 Example 1
The Javascript trusted function saved in the Acrobat apps folder:
mySaveAs = app.trustPropagatorFunction(function(doc,path)
app.beginPriv();
var myDoc = event.target;
myDoc.saveAs(path);
app.endPriv();
myTrustedSpecialTaskFunc = app.trustedFunction(function(doc,path)
// Privileged and/or non-privileged code above
app.beginPriv();
mySaveAs(doc,path);
app.endPriv();
// Privileged and/or non-privileged code below
Javascript code I have on my button click:
xfa.resolveNode("RA");
myTrustedSpecialTaskFunc(this, "/c/temp/" + RA + ".pdf");
this returns a saved file with the name of: [object XFAObject].pdf in the folder specified above.
The Javascript code in the Adobe example is:
myTrustedSpecialTaskFunc(this, "/c/temp/mySavedDoc.pdf");
this returns a pdf file in the specified folder with a file name of "mySavedDoc.pdf"
I am using MS XP with Adobe LiveCycle Designer ES2 and Adobe Acrobat X Pro

myTrustedSpecialTaskFunc(this, "/c/temp/" + RA.rawValue + ".pdf");
Kyle

Dynamic flat file name based on selected date range

Hi,
I have created mapping which load data into file, i have to create file with the range specified for the data to be pulled.
e.g if i have to load data from 01-sep-12 to 15-sep-12 the file name should be ext_rio_15-sep_to_15_sep. how can i achive through owb

https://blogs.oracle.com/warehousebuilder/entry/dynamically_generating_target
Cheers
David

Automatically create file name based on information in image

Hi,
I have a requirement to scan 100 documents into a single tiff file. I need a software that can split the images (inside the big tiff file) into individual tiff files afterward. I need to extract a number appearing in each of these tiff image to become the filename of each individual tiff file after splitted. Finally, I have a process to upload and attach these files to the corresponding table rows in Oracle.
Does anyone know any software that can accomplish this?
Thanks.
Andy

Use the file dialog box function to get the file name/path.
To save the file , use appropriate write function ( as per file type that is being saved..text file,datalog , binary ..)

Create a file name based on message

hi
   suppose the message consists of
<header>
    ibm
i want to have a file name created as ibm in recie ver side in file 2 file scenario.
i.e whatever name i get under header i want to create the same as fle name.
please suggest me.
regards
raghu.

If youe message structure look like this:
<MT_VENDORMASTER>
<RECORD>
<Header>ibm</Header>
</RECORD>
</MT_VENDORMASTER>
Then you can use variable substition in the Receiver Communication channel as following
variable name:
filename
Reference: payload:MT_VENDORMASTER,1,RECORD,1,Header,1
and use the follwoing parameter in the file name: %filename%.txt
Regards.
Jeet.

Reading file names in the unix box

Hello,
I did the following to read the files from the local directory.
String s1 = "c:\samplefiles"
File dir = new File(s1);
if(dir.isDirectory())
String listoffiles [] = dir.list();
for(int i = 0; i <listoffiles.length ; i++)
System.out.println(listoffiles);
else
System.out.println("Its not a directory");
How can i read and print the file names in the unix box?
Thank You.
Kumar

Thank You for the reply.
In my custom page, i am trying to include a search page which includes date parameters based on which the pdf files in the unix box should be displayed in the page as a list. (The pdf file names start with the date).
Once the user clicks the file names displayed in the page, i need to open the pdf. This part i can handle but to search the file names based on the parameter names and display in the page as the list is a bit confusing.
Thank You.

Selection of Folder/File name using the same Fun.Module

Please let me know if there is a function module which can fetch folder name/File name from the directory path when f4 option of selection screen field is selected. Currently I am able to get the file name using FM F4_DXFILENAME_4_DYNP but the requirment is like I have to select either folder name or the file name depending on user selection.
Note: Please let me know if there is a single Function module which can get folder name or the file name based on the user selection.i.e, if the user want to select a folder he can select or he can select files in the folder for processing

Hi sridhar
try this:
PARAMETER : TXT_FILE(100).
AT SELECTION-SCREEN ON VALUE-REQUEST FOR TXT_FILE.
PERFORM GETFILE.
start-of-selection.
PERFORM GETDATA.
FORM GETDATA.
DATA : FILENAME TYPE STRING.
FILENAME = TXT_FILE.
CALL FUNCTION 'GUI_UPLOAD'
    EXPORTING
      FILENAME                      = FILENAME
     FILETYPE                       = 'ASC'
     HAS_FIELD_SEPARATOR           = 'X'
    HEADER_LENGTH                 = 0
    READ_BY_LINE                  = 'X'
    DAT_MODE                      = ' '
    CODEPAGE                      = ' '
    IGNORE_CERR                   = ABAP_TRUE
    REPLACEMENT                   = '#'
    CHECK_BOM                     = ' '
IMPORTING
    FILELENGTH                    =
    HEADER                        =
    TABLES
      DATA_TAB                      = IT_UPLOAD
EXCEPTIONS
    FILE_OPEN_ERROR               = 1
    FILE_READ_ERROR               = 2
    NO_BATCH                      = 3
    GUI_REFUSE_FILETRANSFER       = 4
    INVALID_TYPE                  = 5
    NO_AUTHORITY                  = 6
    UNKNOWN_ERROR                 = 7
    BAD_DATA_FORMAT               = 8
    HEADER_NOT_ALLOWED            = 9
    SEPARATOR_NOT_ALLOWED         = 10
    HEADER_TOO_LONG               = 11
    UNKNOWN_DP_ERROR              = 12
    ACCESS_DENIED                 = 13
    DP_OUT_OF_MEMORY              = 14
    DISK_FULL                     = 15
    DP_TIMEOUT                    = 16
    OTHERS                        = 17
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM.
FORM GETFILE.
CALL FUNCTION 'WS_FILENAME_GET'
   EXPORTING
    DEF_FILENAME           = ' '
     DEF_PATH               = '.'
    MASK                   = ' '
    MODE                   = ' '
    TITLE                  = ' '
   IMPORTING
     FILENAME               = TXT_FILE
    RC                     =
EXCEPTIONS
    INV_WINSYS             = 1
    NO_BATCH               = 2
    SELECTION_CANCEL       = 3
    SELECTION_ERROR        = 4
    OTHERS                 = 5
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM.
<b>This is a part of my BDC program its working for me u try n reply if it works for u.</b>
regards
vijay

Dynamic file name in case of .txt output files

Hi all,
I have a query related to dynamic file name scenario.
In case of IDOC-XI-FILE sceanrio,
<b>Is it possible to generate .txt file name based on Plant number like</b>
<b>%<Plantname>%_%<BusinessDay>_filename.txt</b>
<b>Note:I have implemneted this for .xml output files but I am not able to implement it for .txt output files .</b>
PLEASE HELP ME .
Regards
Prabhat

Hi Prabhat,
I think, the normal Dynamic File Name generation should work fine in your case also. Even if you perform Content Conversion, you can use Variable Name Substiution to create your Destination file name as, the name of the file is determined first and only then is the content converison perfromed.
for info on content conversion, I would suggest that you go through this thread and check my reply,
Re: Dynamic File Name for Receiver File Adapter
Regards,
Bhavesh

Dynamic Configuration File Names

Hi,
I have a RFC->XI->File scenario.
I have to put the target files names based on the calculation of values in 2 fields in the input.
I tried using Dynamic Configuration in my message mapping for this.
This is the code:
DynamicConfiguration conf = (DynamicConfiguration) container.getTransformationParameters().get(StreamTransformationConstants.DYNAMIC_CONFIGURATION);
DynamicConfigurationKey key = DynamicConfigurationKey.create(u201Chttp://sap.com/xi/XI/System/Fileu201D,u201CFileNameu201D);
String MyFileName = a + "_" + b +".xml";
conf.put(key, myFileName);
I checked ASMA in both the sender RFC adapter as well as the receiver file adapter.
But it never works.
I saw the dynamic configuration tab in SXMB_MONI but i can see only the RFC destination parameter.
Cant see the file filename parameter.
What is the problem here?

No need enable ASMA on RFC sender adapter.
See if the file channel is activated after selecting ASMA with FileName.
The UDF might not be use in the mapping. Check this.
Edited by: Praveen Gujjeti on Feb 23, 2010 1:05 AM

Dynamic file Name generation

Hi Experts,
i have the requirement
I need to extract some records from Database (Scenario is Database to file) and we need to put it into file.
then i need to change the file name based on certain conditions and send it to relevent file server which are globally located across the world.
My Doubts are :-
1- After extracting the records from Database From where i can get file name?? Can i get the file name from SXMB_MONI. If yes then How??
2- Now I got the file name then i need to change this file name into different file names (Dynamically) based on some conditions to send it to different file servers. Can i do it in my mapping Or i need to write a module for it.??
Thanks in Advance
Regards Prajwal

Hi Naluvala,
Based upon your condition you can directly set the file name using this UDF:
DynamicConfiguration conf = (DynamicConfiguration) container
    .getTransformationParameters()
    .get(StreamTransformationConstants.DYNAMIC_CONFIGURATION);
DynamicConfigurationKey key = DynamicConfigurationKey.create(
    u201Chttp://sap.com/xi/XI/System/Fileu201D,
    u201CFileNameu201D);
String valueOld = conf.get(key);
if (valueOld != null) {
    String valueNew = valueOld.replaceAll(u201Cinputu201D,u201Doutputu201D);
    conf.put(key, valueNew);
Instead of using get function to populate the valueOld, you can use your own logic.
Regards,
Sanjeev.

Save As with suggested file name and folder

I would like the user to be able to press a save button on the pdf and the "Save As dialogue box" pops up pre-populated with a file name and location choosen. The user can then choose to name the file something otherwise or select a new location. I would just like to save them the steps of copying the field data and finding the correct folder (deeply buried on server) however to place the finished document in.
This doesn't seem to require a trusted function, but how do I suggest the file name based on a field name in the document. And how do I suggest the folder the document should be saved into?
Thanks in adavance.

Hi,
you need a folder level script to use the browseForDoc method.
http://www.adobe.com/content/dam/Adobe/en/devnet/acrobat/pdfs/js_api_reference.pdf#page=10 4

File name based routing

Similar Messages

Maybe you are looking for