File Read Failure

hi
I am trying to read the file which is written from LabVIEW only. But it fails. I cant debug this.
my source data is fixed 2d array of cluster of 55 elements.
Herewith i attached VIs for reference. ( If i try to convert the data to variance, LabVIEW crashed and giving memory.cpp error)
Kindly help me to solve this.
regs
Karthik
Attachments:
FILE.zip ‏47 KB

devchander wrote:
Hi karthik, Put this array again into a cluster and it will work You cannot read an array since you get this error error 116 LabVIEW: Unflatten or byte stream read operation failed due to corrupt, unexpected, or truncated data. read the cluster and unbundle the array out look at modified VI's attached
Instead
of putting the data structure into a cluster you could also wire a
boolean TRUE to the write header (F) input of the Write File function.
This tells LabVIEW to also store the dimension sizes of the outermost
array to disk. Embeding it in a cluster makes the array simply not be
the outermost data type so LabVIEW has to and will store the dimension
sizes to disk at all times, but the write header (F) boolean is a
cleaner and more proper way to do things instead of packaging the data
into another structure, making the understanding of the datatype even
more complicated.
But to be honest, such a data structure is simply insane! It means that
the person who has designed it has not thought about the architecture
and design of the application at all before starting to wire together
his VI. With an application setup to use such data structures you are
bound to run into a brick wall full speed sooner or later.
Rolf Kalbermatter
Rolf Kalbermatter
CIT Engineering Netherlands
a division of Test & Measurement Solutions

Similar Messages

File Import Failure with Adobe Premiere Elements 11

I've just installed Adobe Premiere Elements 11 on my Windows computer. I have started a video project, saved it and when I tried to re-open it I got this File Import Failure message "This type of file is not supported or the required codec is not installed". What do I do? Thanks for your help!!

I've just installed Adobe Premiere Elements 11 on my Windows computer. I have started a video project, saved it and when I tried to re-open it I got this File Import Failure message "This type of file is not supported or the required codec is not installed". What do I do? Thanks for your help!!

Passing file read location as a parameter or dynamica to FTP write adapter.

Hi All,
We have a requirement to FTP files to a location. We are planning to use FTP adapter in SOA 11g.
But our requirement is to pass the file read location as a parameter as in case of failure we are planning to read file from the archive location.
But FTP location to which file is written or ftped will always remain constant. Only the read location from which this file is picked needs to be dynamic.
Any pointers on this will be of great help.
Thanks,
Sowmya

Hi,
In 11g we can pass filename and directory name at runtime through properties on receive activity.
If you double click on the Receive activity (connecting to file Adapter), then on Properties tab, you will find three properties jca.file.Directory, jca.file.Filename and jca.file.Size. Select the property which ever you want and assign variable/expression to it.
Value assigned to Variable can be passed runtime as an input to the process.

File import failure in premiere pro on specific files

I have installed the latest version of Premiere Pro CC 2014. I am trying to import several video files that i have recorded on a Canon 5D Mark III. The problem is that while some of the files gets successfully imported, many files cant import because of a error message, file import failure. Unsupported file format etc. I have tried to open this in many media players, and all work fine there. I have even imported these files on the same Premiere Pro-version on a different machine, and there they work perfectly. But on this machine some files just wont open. Does anybody have a clue or tips on how I can fix this? I guess its a problem within the software.

It just seems to pick certain files and reject them.
Which ones does it eject? eg do they have a different file extension from the video files.
Are they rgb?

Quicktime file import failure in CS5 After Effects and PPro

Running a Dell PC with a fresh install of Win 7 Pro, Intel Quad Core 2 with 4GB. Ram.When I try to import quicktime files into AE or PPro, I get a file import failure or corrupted file message. I am using quicktime version 7.6.6. I have tried uninstalling and removing all preferences, then reloading older versions of quicktime (7.2) rebboting the machine, and still no luck. Any tips would be appreciated. I have not been able to get any help from Adobe. I have a laptop setup the same way and it works great. I even tried loading the exact same versions of qt. and tried to use the Importerquiktime.prm file from that machine.

I appreciate the feedback. I checked the processes upon AE start and found that the Adobe QT server32 starts then closes in the processes before AE actually loads up. If it is supposed to remain open, it does not. I can not find where to change its permissions. I looked the site you sent a link to, but do not see that section.

Mxf File import failure

Dear All,
I have a problem to import files in CS4 from a Sony PDW-U1(MPEG2 HD 50CBR_1920_1080_422P@HL" formatFps="50i") on my new HP Quad Core 4600.
The error message: file import failure "Unsupported format or damaged file" but is not damaged.
The PC don't have a capture card and I don't need it, I just want to import the mxf and edit it on the timeline then encode in flv.
Someone have an idea?
Many thanks
Claudio

MainConcept sells a fairly expensive PP plugin that supposedly will read the Sony XDCAM HD 422 50 mbps MXF files. I downloaded the demo, but I could never get it to work right, because according the MainConcept, it won't install correctly if you have both CS3 and CS4 components installed. Maybe your luck will be better:
http://www.mainconcept.com/site/prosumer-products-4/xdcam-22351/information-22391.html

File conversion failures

Trying to combine pdf files to a single file and get file conversion failure. What's wrong?

All are pdf files saved or converted from word. I've been able to convert several other files. I have also systematically tried to leave out one file and combine the rest (total 6 files). Any way to determine which file is the problem.

Message: ORA-12570: TNS:packet reader failure

Hi,
when i execute the below program,getting "Message: ORA-12570: TNS:packet reader failure" error. java version is 1.3.1 and oracle
version is :9.1.
able to connect to database using sql plus with the same user-id and
password.
Any help in this regard is appreciated.
Thanks
Chat
import java.sql.*;
import java.io.*;
import java.util.Date;
class JdbcTest
public static void main (String args [])
    System.out.println ("Loading Oracle driver");
    try
      Class.forName ("oracle.jdbc.OracleDriver");
     System.out.println ("Connecting to the local database");
    Connection conn =
      DriverManager.getConnection("jdbc:oracle:oci8:@orcl,scott,tiger");
    System.out.println("debug 1 ....\n");
    Statement stmt = conn.createStatement ();
    System.out.println("debug 2 ....\n");
    // Query the employee names
    ResultSet rset = stmt.executeQuery ("select ename from emp");
    while (rset.next ())
      // Print the name out
      System.out.println (rset.getString (1));
} catch (ClassNotFoundException cnfe){
      System.out.println ("Could not load the driver");
      cnfe.printStackTrace ();
} catch (SQLException sqle) {
          System.out.println( "State : " + sqle.getSQLState() ) ;
           System.out.println( "Message: " + sqle.getMessage()   ) ;
           System.out.println( "Error : " + sqle.getErrorCode() ) ;
} catch (Exception e) {
      System.out.println ("Could not load the driver");
      e.printStackTrace ();
C:\mjava>java JdbcTest
Loading Oracle driver
Connecting to the local database
State : 66000
Message: ORA-12570: TNS:packet reader failure
Error : 12570
C:\mjava>

Hi Chat,
You are using the oci8 driver and you may or may not be aware that oci8 is a type 3 driver that requires that the Oracle client be installed on the computer that is running the Java program. It also requires that you setup Oracle networking correctly, usually by putting an entry into your Oracle tnsnames.ora file.
If there is no reason in particular that you are using the oci8 driver, then you should use the thin driver instead. The thin driver is a type 4 driver and does not require the Oracle client to be installed, and does not require configuration of Oracle networking. You do have to download the Oracle JDBC drivers from the Oracle website to the computer you are going to run your program on, and then place the oracle .jar files that contain the driver into the programs CLASSPATH. This can be done by setting an environment variable or by passing it to java.exe as a command line parameter. The url for the thin driver looks something like this, but you should check the Oracle doc for specifics or search this forum for more examples:
jdbc:oracle:thin:@myserver:1521:mydatabaseWhen using a type 3 driver you should verify that you have Oracle networking properly configured for the computer that will be running your Java program by either connecting to the database using SQL/Plus or 'ping' the database using Oracle's tnsping utility. Make sure you check for valid connectivity before trying to run your Java program.

File Import Failure; File has unsupported compression type!

I completed editing my movie about two weeks ago did all the colour correction audio etc last week, and aim to complete the sutitling tomorrow!
But now the problem is that my some of my files are now offline and can't be relinked because I get an error message which says "File Import Failure; File has unsupported compression type"
These files are .MTS which I believe are AVCHD.
So I don't know what has happenned here. Is it the recent update that has caused this or something else?

This have happend to me twice now.
If I remember correctly it have to do with Cloud membership in my case. Both times I have been away on work and when I get home I have a email stating that payment have failed. After I set it right I start up Premiere and I get this failure.
First time the solution was uninstall Everything Adobe and run clean script. Reinstalling did the trick.
That solution is not working in the long run.
Here Adobe needs to do something soon!

File upload failure

Hi,
My system is unable to upload the file to SRS server stating the below error:-
SRS Proxy[19653]: [ID 728115 daemon.error] File upload failure: exceeded maximum retry count
Pls. give me the solution for this

I believe this is a cross post, please only post in one location. Do you
          observe any errors to std.out or std.err vs. the log file? Sometimes when
          there are memory errors there is no more resources to log messages and the
          error (by the VM) will go to std out/err. Also you might turn on -verbosegc
          to see what is going on with memory during the test. Are you trying to
          bring the entire upload into memory prior to writing it to disk, or are you
          writing as you go?
          Cheers
          mbg
          "Paul Botta" <[email protected]> wrote in message
          news:3ecacd0e$[email protected]..
          > I have a JSP/Servlet that provides users with a file upload mechanism. It
          works fine for small files, but when I post a large file (500 mg) the
          uploads is incomplete. I've confirmed that my servlet that handles the
          uploaded file isn't even being called, so it would seem that it fails
          during as the wl server is creating the temp file. There is no exception
          that I can see in the log files. Any suggestions?

Random ORA-12570: TNS:packet reader failure errors

We are seeing random ORA-12570: TNS:packet reader failure errors. Trace files regularly show the following entries:
2012-09-06 14:45:01.974959 : nttrd:entry
2012-09-06 14:45:23.327987 : ntt2err:entry
2012-09-06 14:45:23.328093 : ntt2err:soc 844 error - operation=5, ntresnt[0]=530, ntresnt[1]=53, ntresnt[2]=0
2012-09-06 14:45:23.328112 : ntt2err:exit
2012-09-06 14:45:23.328127 : nttrd:exit
2012-09-06 14:45:23.328177 : nserror:nsres: id=0, op=68, ns=12570, ns2=12560; nt[0]=530, nt[1]=53, nt[2]=0; ora[0]=0, ora[1]=0, ora[2]=0
Oracle Client is Server 2008 R2 on VMWare.

Hi;
Please also review:
ORA-12570 ON CONNECTION ATTEMPT IN SERVER MANAGER WITH NO NETWORK CONNECTION [ID 91210.1]
But As mention here rise SR please
PS:Please dont forget to change thread status to answered if it possible when u belive your thread has been answered, it pretend to lose time of other forums user while they are searching open question which is not answered,thanks for understanding
Regard
Helios

Still having problems: "File Import Failure"

Hi All,
I am still having problems transferring clips to Time Line or Project window of CS4 or PPro1.5. I could copy all clips from the Sony Clip Browser(SXS Memory Card Reader) to HardDrive(not C:\drive). But when I drag clips from Hard Drive to Project Window, it says "File Import Failure" and file format (.MP4)not supported. The file shows like this:
J:\test1\20100306210847\BPAV\CLPR\Test01\Test01.MP4
I really would appreciate if anyone could help me from the basics..I was trying this for the last 2weeks..I have uninstalled AdobeCS4 and installed PPro1.5. Still no difference.
My machine is a Dell 2.8GHz, 2GB DDR2RAM, plenty of internal and external HDD spaces.
Hope some one out there might help me with step by step procedure to get it going...
I don't know what to do now..
Thx...Pushpa

Hi Harm
The BPAV folder is in HDD connected externally via USB2. I will transfer it to D:\ drive which is internal and it's SATA drive. will give it a try. Thx for ur input for my dumb queries..I am so frustrated now..
Ur help much appreciated.
Pushpa

ORA-08176: consistent read failure; rollback data not available

Hi,
We implemented UNDO management on our servers and started getting these errors for few of our programs.:
ORA-08176: consistent read failure; rollback data not available
These errors were not coming when we were using the old rollback segments and we have not changed any code on our server.
1. What is possibly causing these errors?
2. Why did they not surface with rollback segments but started appearing when we implemented AUM and Temporary TS (instead of fixed TS used as temporary TS).
Our environment:
RDBMS Version: 9.2.0.5
Operating System and Version: Windows 2000 AS SP5
Thanks
Satish

NOt much in the alert.log. I looked at the trace file, it also does not have much information:
ORA-12012: error on auto execute of job 7988306
ORA-20006: ORA-20001: Following error occured in Lot <4407B450Z2 Operation 7131> Good Bad rollup.ORA-08176: consistent read failure; rollback data not available
ORA-06512: at "ARIES.A_SP$WRAPPER_ROLLUPS", line 106
ORA-06512: at line 1
*** SESSION ID:(75.13148) 2004-11-23 09:16:14.281
*** 2004-11-23 09:16:14.281
ORA-12012: error on auto execute of job 7988556
ORA-20006: ORA-20006: Following error occured in Lot <3351A497V1 Operation 7295> For No FL Rollup, Updating T_GOOD.ORA-08176: consistent read failure; rollback data not available
ORA-06512: at "ARIES.A_SP$WRAPPER_ROLLUPS", line 106
ORA-06512: at line 1
*** SESSION ID:(75.16033) 2004-11-23 09:28:10.703
*** 2004-11-23 09:28:10.703
The version we have is :
Oracle9i Enterprise Edition Release 9.2.0.5.0 - Production
PL/SQL Release 9.2.0.5.0 - Production
CORE 9.2.0.6.0 Production
TNS for 32-bit Windows: Version 9.2.0.5.0 - Production
NLSRTL Version 9.2.0.5.0 - Production
Thanks
Satish

File Import Failure message

I've just started the switch from FCP to Premiere on my Macbook Pro and am stuck early on with two issues.
File Import Failure message.
Importing some clips shot with a Canon 5D Mark II [ 24 fps (23.9+)] and PP seems to import them but also gives me a "File Import Failure" and "File format not supported" messages. I've tried to input a folder from the flashdisk itself and from a copy on a disk drive. The error message shows up and then all the files also show up in clips in PP.
But something is wrong because when I play the files back in the Source window they play speeded up even though PP shows the correct file length.
I've tried making a sequence set to 24 fps (23.9+) and same thing happens. The sequence and the files both have the same frame rate. When I drag a clip into the sequence e it's still speeded up.
Sure would like to get started . . . this is probably a simple thing.
I'm using the 30-day trial of CC PPro 7.
Can anyone help?
Many thanks,
Robert
It's an MBP with 2.6 ghz i7, 8 g ram, OS 10.8

How exactly are you importing the clips? Through Media Browser? File>Import...? Drag and drop from Finder? And perhaps more to the point, exactly which files or folders are you selecting for import. With folder-based content, your best bet is to use Media Browser, which knows how to make sense of the multiple files that comprise each clip. If, instead, you simply drag a whole folder into the Project panel, Premiere will import the media files but throw the File Import Failure message for other files like XML. (If you stretch the dialog horizontally, you'll be able to see the full filename and extension of the ones that PPRO is balking at. Yes, I know, the mouse pointer doesn't give you the expected feedback that it will work to stretch the dialog, but trust me.)
As to the clips playing faster than real-time, what frame rate is reported in both the Project panel and the Metadata panel. In the latter panel, please check both the Clip section at the top and the File section under Dynamic Media (typing "frame" in the search field will show you both).
Also, what do you see in the Frame Section of the Interpret Footage dialog (Clip>Modify>Interpret Footage.)
What's the stated duration, and how long does the clip actually take to play from start to finish?

(Urgent) TNS-12570 TNS:packet reader failure

Hi
I have oracle 9.0.2 and developer 6i installed on the same machine for development purpose. Every thing was running fine but today when I tried to connect the form builder to database it raised following error:
TNS-12570 TNS:packet reader failure
Cause: An error occurred during a data receive. This message is not normally visible to the user.
Action: For further details, turn on tracing and re-execute the operation. If the error persists, contact Oracle Support Services.
when I tried to connect from remote machine on LAN it raised following error:
TNS-12537 TNS:connection closed
Cause: "End of file" condition has been reached; partner has disconnected. This is an informational message.
Action: No action required.
Do you have any solution to this problem
Regards
Faisal

Recently found the same problem in my system. I got this problem after installing McAfee Internet Security suite which installs personal firewall.
I un-installed oracle and re installed it result is same.I am using oracle 8i (8.1.5)
Funny part is if I give SID in sql plus then only i get this error otherwise if I put scott/tiger in sqlplus without SID it connects to database.
This does not solves my purpose coz one of my application connects to database in which dburl contains SID.
Thanks in advance
satyen

File Read Failure

Similar Messages

Maybe you are looking for