File sender to read restricted records using FCC

Hi Experts,
  My requirement is read data from a Flat file of Fixed length the data is as follows
D000001111B   ADDPT 20070713       
D000001111B   CTRB  20070713      
D000001111B   DCRA  20070713       
D000001111B   DENPT 20070713       
E000001166B   ADDFD 20070713     
E000001166B   DENFD 20070713       
E000001166B   LIFFD 20070713      
E000001166B   LTDFD 20070713       
E000001166B   MEDFD 20070713       
E000001177M   MPPI  20070713       
E000001122B   ADFD  20070713       
ie all "D" records come together and all "E" records come together
The requirement is to read only the first few records of type "D" && few records type "E" but, please note that there is "RECORD SET" in this, i just need to read few of "D" and few of "E" records
Example: only first 3 "D"s and first 3 "E"s
suggest me the apt way to do this.
Pavan

Pavan,
Checkout the property "RecordSets per messages"..but you can restrict to top"n" of message only...not to 2 different set of messages as you have mentioned above..
As satish said it is better if you read all lines into XI and in mapping you can just select top "n" messages of type"D" and "X"..whatever....you will get better control there..
Nilesh

Similar Messages

  • File to RFC with multiple records using BPM Scenario Error...!!!

    Hello Guru's,
      I have done the File to RFC with multiple records using BPM scenario as per the Materiel available in the sdn.sap. This involves BAPI (BAPI_MATERIEL_AVAILABILITY). I have done exactly the same what is their in the materiel. SXI_CACHE is also giving return value " 0 ". File is getting deleted from the source directory, but no file in target directory. SXMB_MONI is also showing no error (black Flag). BPM is also error free. Checked the interfaces also.
    Can any one tell me what mistake would i have done.
    Thanks in advance.

    Hi,
    There is one similar discussion I found,
    FTP TO RFC using BPM
    Thanks
    Swarup

  • File not able to pick while using FCC at sender channel

    Hi Experts ,
    we design one scenario that we need to process flat file to ECC. So we have used FCC at sender channel.
    while we testing ,  only its showing as successfull logs in channel , but we not able to pick the file.
    could you please check the below details and let me know it i missed any thing.
    PFB file which  need to pick.
    PFA scrren shot of FCC
    26.Jun 2014 #123
    Country|Currency|Amount|Code|Rate
    Australia|dollar|1|AUD|18.989
    Brazil|real|1|BRL|9.119
    Bulgaria|lev|1|BGN|14.037
    Canada|dollar|1|CAD|18.836
    China|renminbi|1|CNY|3.242
    Croatia|kuna|1|HRK|3.623
    Denmark|krone|1|DKK|3.682
    EMU|euro|1|EUR|27.455
    Hongkong|dollar|1|HKD|2.603
    Hungary|forint|100|HUF|8.916
    IMF|SDR|1|XDR|31.154
    India|rupee|100|INR|33.540
    Indonesia|rupiah|1000|IDR|1.668
    Israel|shekel|1|ILS|5.883
    Japan|yen|100|JPY|19.824
    Lithuania|litas|1|LTL|7.952
    Malaysia|ringgit|1|MYR|6.272
    Mexico|peso|1|MXN|1.550
    New Zealand|dollar|1|NZD|17.678
    Norway|krone|1|NOK|3.286
    Philippines|peso|100|PHP|46.019
    Poland|zloty|1|PLN|6.627
    Romania|new leu|1|RON|6.258
    Russia|rouble|100|RUB|59.842
    Singapore|dollar|1|SGD|16.137
    South Africa|rand|1|ZAR|1.894
    South Korea|won|100|KRW|1.986
    Sweden|krona|1|SEK|2.989
    Switzerland|franc|1|CHF|22.569
    Thailand|baht|100|THB|62.119
    Turkey|lira|1|TRY|9.469
    United Kingdom|pound|1|GBP|34.361
    USA|dollar|1|USD|20.179
    FCC details
    channel logs.
    regards
    raju

    Hi Peddaraju,
    Cross check correct source directory and file name is maintained in the sender file communication channel. If everything is fine try to restart the XPI File Adapter service in NWA.
    Troubleshoot as suggested in the below thread:
    File Adapter in PI not reading file from file system.
    Regards,
    Krupa

  • JDBC sender: after read insert records into another table

    Hi all,
    I send records from a SQL view (not a table) to RFC via proxy method.
    After reading a record from the view I would like to move this record to a database table called CHECKED. Can anyone provide me a solution for this or is this impossible. (there are 6 fields that have to be inserted in DB CHECKED after reading: admin, bukrs, dagbknr, bkstnr, datum, regel)
    Can I use an INSERT statement in my Update SQL Statement with variables or do I have to create an SP?
    Hope someone can help me out of here...
    Thanks in advance!
    Wouter.

    ur strucutre would of:
    <root>
    <Satement1>
    <TableName action=”INSERT”>
    <table>checked</table>
    <access>
    <admin>val</admin>
    <bukrs>val</bukrs>
    <dagbknr>val</dagbknr>
    <bkstnr>val</bkstnr>
    <datum>val</datum>
    <regel>val</regel>
    </access>
    </dbTableName>
    </StatementName1>
    </root>
    or u can use a SQL DML which wud pose a strucutre similar to
    <root>
      <stmt>
        <Customers action="SQL_DML">
          <access> INSERT CHECKED SET admin=’$admin$’, bukrs=’$bukrs$', dagbknr=’$dagbknr$’, bkstnr=’$bkstnr$', datum=’$datum$’, regel.=’$regel.$'
          </access>
        </Customers>
      </stmt>
    </root>
    for more inputs refer to <a href="/people/sap.user72/blog/2005/06/01/file-to-jdbc-adapter-using-sap-xi-30 link on jdbc</a>

  • Read infotype records using the classes

    Hi All,
    In my system i can see many classes with cl_hrpa*
    Here i want to read a infotype record using these classes. I want finally the data in PA0008 or a record in P0008 format.
    i tried using the various classes like
    cl_hrpa_masterdata_factory
    if_hrpa_infty_bl
    hrpad_infty_container_tab
    I tried using the sevaral calsses passing one class type to other. finally i get is the class cl_hrpa_infotype_0008_in.
    can any one suggest how i should be reading the data for any infotype.
    Pls do not suggest the function module HR_READ_INFOTYPE. I want to use these classes to read the data.
    Pls suggest
    Regards,
    Umesh Chaudhari.

    Hi,
    Did you get any replies to this or have you found an answer on your own?
    Regards,
    LC

  • Sending mail of infotype record using dynamic actions

    Hi
    How can we send mail of info type record using dynamic actions if possible give me one example
    Mail to me: [email protected]
    Thanks & Regards
    santhosh reddy

    Hi..
    Already Standard Entries exists for the same.. pls check T588Z

  • Sender file adapter Need to Get Only one record Using FCC

    Hi All,
                  I am using File to ABAP Proxy interface, where i need to Trigger my proxy so in my sender file adapter , i need to configure as such it is should take only one record, from whole file i am using Key field parametrs in FCC but it is taking all the records which is not having the key fields also
    please help me
    Thanking you
    Sridhar

    2A64310       1 6V83970       03751650016001154000                    1 6V9961XT-3   13236157001160
    2A64310       1 6V83970                        000                    1 6V9962XT-3   23236162
    2A64730       1 6V83970       03751650016000106000                    1 6V9962XT-3   13236162000112
    2A64730       1 6V83970                        000                    1 6V9961XT-3   23236157
    2A64741 6V99481 6V83971 4S541403751650016000152360                    1 6V9964XT-3   13236168000166
    2A64741 6V99471 6V83971 4S5414                 000                    1 6V9963XT-3   23236167
    2A64772 6V99492 6V83982 3S860605001650017000244000                    2 6V9965XT-3   13289090000248
    2A65690       1 6V97460       07501226872000110000                    11242153L&MP   1
    2A65690       1 6V97460                        000                    11242121L&MP   2
    EOF
    this is sample file , i need to have any one line , cause i need to just trigger a proxy , i am not to going tp take entire file cause in real time i will getting 100 MB file which will be a performance issue

  • Line gap between record to record using FCC

    Hi Experts,
    i am working on xml to fcc scenario.In target text file i want line gap between each record.
    eg:
    1001,ABCD,23
    1002,CDF,45
    1003,FSF,34
    what are the parameters do i need to provide in reciever fcc adapter?
    please help me in this issue.
    Regards,
    Radhika.

    Hi Radhika,
    I guess you can achieve this with "NameA.absoluteRowWidth=<noOfColumns>" along with "xml.endSeparator".
    If the separators do not contain any line breaks, the text document is generated as a single line of text. To restrict the width of the text, use this parameter. <noOfColumns> represents the maximum number of columns in this case. This parameter also functions together with the specification of a line break for xml.endSeparator.
    This value requires NameA.addHeaderLine=0 to be specified.
    Give a try..
    Regards,

  • Not receiving email when sending large number of records using a FM?

    Hi..
    I am using the function module " SO_DOCUMENT_SEND_API1 " to send email....
    When a single record is there.. or around 5-6 records are there... email is coming successfully...
    But when there are more records..say around 100, the email is not coming... I checked SOST transaction and the status there is in red..and the error message is " Internal error: SO_OBJECT_MIME_GET Exception: 2 ".........
    What could be the reason behind this problem....... ??
    I have another problem... my output has over 60 fields, but in the email which i am receiving has only around 10 fields... how to solve this problem...??
    Plz help...

    Well... right now i am tryin to get only the first 2 fields.. but even in this case... i am not getting the email if around 15 records are there......
    I am using the code which is given below which i found in SDN only......In this code.. data is getting selected from EKPO... i tried changing the number of rows getting selected.. and in this case, the attachement is coming as desired... but when i use the same code for my prog.. i am not getting the mail.. even if there are only 10 records or so...
    *& Report  ZT062108   ALV Header                                    *
    REPORT  zt062108.
    TABLES: ekko.
    PARAMETERS: p_email   TYPE somlreci1-receiver
                                      DEFAULT '<give email here>'.
    TYPES: BEGIN OF t_ekpo,
      ebeln TYPE ekpo-ebeln,
      ebelp TYPE ekpo-ebelp,
      aedat TYPE ekpo-aedat,
      matnr TYPE ekpo-matnr,
    END OF t_ekpo.
    DATA: it_ekpo TYPE STANDARD TABLE OF t_ekpo INITIAL SIZE 0,
          wa_ekpo TYPE t_ekpo.
    TYPES: BEGIN OF t_charekpo,
      ebeln(10) TYPE c,
      ebelp(5)  TYPE c,
      aedat(8)  TYPE c,
      matnr(18) TYPE c,
    END OF t_charekpo.
    DATA: wa_charekpo TYPE t_charekpo.
    DATA:   it_message TYPE STANDARD TABLE OF solisti1 INITIAL SIZE 0
                    WITH HEADER LINE.
    DATA:   it_attach TYPE STANDARD TABLE OF solisti1 INITIAL SIZE 0
                    WITH HEADER LINE.
    DATA:   t_packing_list LIKE sopcklsti1 OCCURS 0 WITH HEADER LINE,
            t_contents LIKE solisti1 OCCURS 0 WITH HEADER LINE,
            t_receivers LIKE somlreci1 OCCURS 0 WITH HEADER LINE,
            t_attachment LIKE solisti1 OCCURS 0 WITH HEADER LINE,
            t_object_header LIKE solisti1 OCCURS 0 WITH HEADER LINE,
            w_cnt TYPE i,
            w_sent_all(1) TYPE c,
            w_doc_data LIKE sodocchgi1,
            gd_error    TYPE sy-subrc,
            gd_reciever TYPE sy-subrc.
    *START_OF_SELECTION
    START-OF-SELECTION.
    *   Retrieve sample data from table ekpo
      PERFORM data_retrieval.
    *   Populate table with detaisl to be entered into .xls file
      PERFORM build_xls_data_table.
    *END-OF-SELECTION
    END-OF-SELECTION.
    * Populate message body text
      perform populate_email_message_body.
    * Send file by email as .xls speadsheet
      PERFORM send_file_as_email_attachment
                                   tables it_message
                                          it_attach
                                    using p_email
                                          'Example .xls documnet attachment'
                                          'TXT'
                                          'filename'
                                 changing gd_error
                                          gd_reciever.
    *   Instructs mail send program for SAPCONNECT to send email(rsconn01)
      PERFORM initiate_mail_execute_program.
    *&      Form  DATA_RETRIEVAL
    *       Retrieve data form EKPO table and populate itab it_ekko
    FORM data_retrieval.
      SELECT ebeln ebelp aedat matnr
       UP TO 1000 ROWS
        FROM ekpo
        INTO TABLE it_ekpo.
    ENDFORM.                    " DATA_RETRIEVAL
    *&      Form  BUILD_XLS_DATA_TABLE
    *       Build data table for .xls document
    FORM build_xls_data_table.
    *  CONSTANTS: con_cret TYPE x VALUE '0D'.  "OK for non Unicode
    *             con_tab TYPE x VALUE '09'.   "OK for non Unicode
    *If you have Unicode check active in program attributes thnen you will
    *need to declare constants as follows
    *class cl_abap_char_utilities definition load.
    constants:
        con_tab  type c value cl_abap_char_utilities=>HORIZONTAL_TAB,
        con_cret type c value cl_abap_char_utilities=>CR_LF.
      CONCATENATE 'EBELN' 'EBELP' 'AEDAT' 'MATNR'
             INTO it_attach SEPARATED BY con_tab.
      CONCATENATE con_cret it_attach  INTO it_attach.
      APPEND  it_attach.
      LOOP AT it_ekpo INTO wa_charekpo.
        CONCATENATE wa_charekpo-ebeln wa_charekpo-ebelp
                    wa_charekpo-aedat wa_charekpo-matnr
               INTO it_attach SEPARATED BY con_tab.
        CONCATENATE con_cret it_attach  INTO it_attach.
        APPEND  it_attach.
      ENDLOOP.
    ENDFORM.                    " BUILD_XLS_DATA_TABLE
    *&      Form  SEND_FILE_AS_EMAIL_ATTACHMENT
    *       Send email
    FORM send_file_as_email_attachment tables pit_message
                                              pit_attach
                                        using p_email
                                              p_mtitle
                                              p_format
                                              p_filename
                                              p_attdescription
                                              p_sender_address
                                              p_sender_addres_type
                                     changing p_error
                                              p_reciever.
      DATA: ld_error    TYPE sy-subrc,
            ld_reciever TYPE sy-subrc,
            ld_mtitle LIKE sodocchgi1-obj_descr,
            ld_email LIKE  somlreci1-receiver,
            ld_format TYPE  so_obj_tp ,
            ld_attdescription TYPE  so_obj_nam ,
            ld_attfilename TYPE  so_obj_des ,
            ld_sender_address LIKE  soextreci1-receiver,
            ld_sender_address_type LIKE  soextreci1-adr_typ,
            ld_receiver LIKE  sy-subrc.
      ld_email   = p_email.
      ld_mtitle = p_mtitle.
      ld_format              = p_format.
      ld_attdescription      = p_attdescription.
      ld_attfilename         = p_filename.
      ld_sender_address      = p_sender_address.
      ld_sender_address_type = p_sender_addres_type.
    * Fill the document data.
      w_doc_data-doc_size = 1.
    * Populate the subject/generic message attributes
      w_doc_data-obj_langu = sy-langu.
      w_doc_data-obj_name  = 'SAPRPT'.
      w_doc_data-obj_descr = ld_mtitle .
      w_doc_data-sensitivty = 'F'.
    * Fill the document data and get size of attachment
      CLEAR w_doc_data.
      READ TABLE it_attach INDEX w_cnt.
      w_doc_data-doc_size =
         ( w_cnt - 1 ) * 255 + STRLEN( it_attach ).
      w_doc_data-obj_langu  = sy-langu.
      w_doc_data-obj_name   = 'SAPRPT'.
      w_doc_data-obj_descr  = ld_mtitle.
      w_doc_data-sensitivty = 'F'.
      CLEAR t_attachment.
      REFRESH t_attachment.
      t_attachment[] = pit_attach[].
    * Describe the body of the message
      CLEAR t_packing_list.
      REFRESH t_packing_list.
      t_packing_list-transf_bin = space.
      t_packing_list-head_start = 1.
      t_packing_list-head_num = 0.
      t_packing_list-body_start = 1.
      DESCRIBE TABLE it_message LINES t_packing_list-body_num.
      t_packing_list-doc_type = 'RAW'.
      APPEND t_packing_list.
    * Create attachment notification
      t_packing_list-transf_bin = 'X'.
      t_packing_list-head_start = 1.
      t_packing_list-head_num   = 1.
      t_packing_list-body_start = 1.
      DESCRIBE TABLE t_attachment LINES t_packing_list-body_num.
      t_packing_list-doc_type   =  ld_format.
      t_packing_list-obj_descr  =  ld_attdescription.
      t_packing_list-obj_name   =  ld_attfilename.
      t_packing_list-doc_size   =  t_packing_list-body_num * 255.
      APPEND t_packing_list.
    * Add the recipients email address
      CLEAR t_receivers.
      REFRESH t_receivers.
      t_receivers-receiver = ld_email.
      t_receivers-rec_type = 'U'.
      t_receivers-com_type = 'INT'.
      t_receivers-notif_del = 'X'.
      t_receivers-notif_ndel = 'X'.
      APPEND t_receivers.
      CALL FUNCTION 'SO_DOCUMENT_SEND_API1'
           EXPORTING
                document_data              = w_doc_data
                put_in_outbox              = 'X'
                sender_address             = ld_sender_address
                sender_address_type        = ld_sender_address_type
                commit_work                = 'X'
           IMPORTING
                sent_to_all                = w_sent_all
           TABLES
                packing_list               = t_packing_list
                contents_bin               = t_attachment
                contents_txt               = it_message
                receivers                  = t_receivers
           EXCEPTIONS
                too_many_receivers         = 1
                document_not_sent          = 2
                document_type_not_exist    = 3
                operation_no_authorization = 4
                parameter_error            = 5
                x_error                    = 6
                enqueue_error              = 7
                OTHERS                     = 8.
    * Populate zerror return code
      ld_error = sy-subrc.
    * Populate zreceiver return code
      LOOP AT t_receivers.
        ld_receiver = t_receivers-retrn_code.
      ENDLOOP.
    ENDFORM.
    *&      Form  INITIATE_MAIL_EXECUTE_PROGRAM
    *       Instructs mail send program for SAPCONNECT to send email.
    FORM initiate_mail_execute_program.
      WAIT UP TO 2 SECONDS.
      SUBMIT rsconn01 WITH mode = 'INT'
                    WITH output = 'X'
                    AND RETURN.
    ENDFORM.                    " INITIATE_MAIL_EXECUTE_PROGRAM
    *&      Form  POPULATE_EMAIL_MESSAGE_BODY
    *        Populate message body text
    form populate_email_message_body.
      REFRESH it_message.
      it_message = 'Please find attached a list test ekpo records'.
      APPEND it_message.
    endform.                    " POPULATE_EMAIL_MESSAGE_BODY

  • File Sender Channel

    Hi,
    I have a job running which copies a file from remote server to my PI server. I have a file sender channel which picks up this file send it for further processing.
    Is there a way to make sure that the file sender channel reads the file only after it has completely been  copied from the remote server assuming that we dnt know what is the maximum time it could take to write the file.

    Two options,
    1. The script should write the file having set the indicator as read only. Only after it writes the file completely the read only option should be removed.
    the option ●      Process Read-Only Files (for transport protocol File System (NFS)) should be disabled
    2. Use this option,
    Advanced Mode
    To specify additional parameters in the adapter configuration, set the Advanced Modeindicator.
    ●      Msecs to Wait Before Modification Check
    Enter the number of milliseconds that the adapter must wait before it checks whether the files have been changed.
    This parameter is not available if you have selected File Content Conversion as the Message Protocoland then made an entry under Recordsets per Message that splits an input file into several messages.
    Note
    This parameter is applicable only for the File adapter. If you enter a value in this field when configuring the sender FTP adapter, it will have no effect.
    All above solutions will work only if its NFS and not FTP

  • Program to read Mx records

    Hi
    Can anybody post the sample code or provide a URL for how to read MX records using java.
    Regards,
    Godspeed

    Try :
    http://www.rgagnon.com/javadetails/java-0452.html
    Bye.
    http://www.rgagnon.com/howto.html

  • Problem in Sender File Adapter using FCC with Variable structure

    Hi Experts,
    Hi Experts,
    I have facing an issues while using FCC in Sender File adapter. Below are the configs for the same:-
    Recordset structure required is ==HEADER,1,DATA,*,TRAILER,1
    Recordset per message == *
    Key Field Name == Key
    (Sorry i dont know how to insert screen shot here..pls tell me how can i insert screen shots here on sdn)
    HEADER.fieldSeparator           ,
    HEADER.endSeparator           u2018nlu2019
    HEADER.fieldNames               Key,x,y,zu2026
    HEADER.keyFieldValue          1
    HEADER.keyFieldInStructure      ignore
    HEADER.fieldContentFormatting     trim
    HEADER.additionalLastFields     ignore
    HEADER.missingLastFields     ignore
    DATA.fieldSeparator
    DATA.endSeparator
    DATA.fieldNames
    DATA.keyFieldValue
    DATA.keyFieldInStructure
    DATA.fieldContentFormatting
    DATA.additionalLastFields
    DATA.missingLastFields
    Using same variables for Trailer record as well.
    Source CSV file which i am picking:-
    ADSE ,RASD,replan  Contact ,2  0080509 0 8:43:25   ,        
    EMPL ,0011111,  S Top Up ,20080401  ,20080430  ,sdf  ,                          00000000431250  ,2007                                    ,  ,  ,  ,  ,  ,20080414  18:07:35,
    EMPL ,0222222,  r Cash Award ,20070701  ,20070703  ,ded  ,                          00000000023509  ,2007                                    ,  ,  ,  ,  ,  ,20080414  18:09:31,
    EMPL ,0233333,   Cash Award ,20070801  ,20070831  ,df  ,                          00000000044057  ,2007                                    ,  ,  ,  ,  ,  ,20080414  18:10:56,
    EMPL ,0244444,   Cash Award ,20080101  ,20080111  ,sf  ,                          00000000026717  ,2007                                    ,  ,  ,  ,  ,  ,20080414  18:08:29,
    BTRL ,   5140, 
    When i tested the scenario and monitored it using MDT in CC monitoring tool its giving me below mentioned error.
    The XML page cannot be displayed
    Cannot view XML input using style sheet. Please correct the error and then click the Refresh button, or try again later.
    XML document must have a top level element. Error processing resource 'http://myurlname/mdt/me...
    However if i change the occurence of DATA as some specific value for eg 4 instead of * it works fine.
    Kindly help me in solving this problem.
    Thanks,
    Aditya Verma

    Hi Madan,
    Thanks a lot for giving me the way to this. But when i tested this with the below file its giving me the same error. Please let me know if i need to do any changes to the parameters mentioned above:-
    ADSE ,ASDA,Sha  replan Fr ont Feed Contact ,2  0080509 0 8:43:25   ,        
    EMPL ,0011111,   Cash Top Up ,20080401  ,20080430  ,TPV  ,                          00000000431250  ,2007                                    ,  ,  ,  ,  ,  ,20080414  18:07:35,
    EMPL ,0222222,   r Cash Award ,20070701  ,20070703  ,TPV  ,                          00000000023509  ,2007                                    ,  ,  ,  ,  ,  ,20080414  18:09:31,
    EMPL ,0233333,  r Cash Award ,20070801  ,20070831  ,TPV  ,                          00000000044057  ,2007                                    ,  ,  ,  ,  ,  ,20080414  18:10:56,
    EMPL ,0244444,   Cash Award ,20080101  ,20080111  ,TPV  ,                          00000000026717  ,2007                                    ,  ,  ,  ,  ,  ,20080414  18:08:29,
    EMPL ,0255555,   Cash Award ,20080301  ,20080320  ,TPV  ,                          00000000027870  ,2007                                    ,  ,  ,  ,  ,  ,20080414  18:08:25,
    EMPL ,0266666,   Cash Award ,20071001  ,20071020  ,TPV  ,                          00000000020681  ,2007                                    ,  ,  ,  ,  ,  ,20080414  18:09:31,
    EMPL ,0877777,   Cash Top Up ,20080401  ,20080430  ,TPV  ,                          00000000036000  ,2007                                    ,  ,  ,  ,  ,  ,20080414  18:07:05,
    EMPL ,0888888,   Leaver Cash Award ,20071201  ,20071231  ,TPV  ,                          00000000157200  ,2007                                    ,  ,  ,  ,  ,  ,20080414  18:11:29,
    EMPL ,0899999,  S Leaver Cash Award ,20080301  ,20080331  ,TPV  ,                          00000000153530  ,2007                                    ,  ,  ,  ,  ,  ,20080414  18:07:42,
    EMPL ,0800000,  S Leaver Cash Award ,20070701  ,20070731  ,TPV  ,                          00000000012234  ,2007                                    ,  ,  ,  ,  ,  ,20080414  18:08:34,
    BTRL ,   5140,
    This the original csv file which i'll get in live. Kindly suggest as ur solution worked with other file but not working with this scv file.
    Thanks a lot,
    Aditya.

  • How do I record a sound file and send it as an attachment using my 4s?

    How do I record a sound file and send it as an attachment using my 4s?

    Hi,
    The following is the program[Click Here| http://saptechnical .com/Tips/ABAP/email/EmailProgram.txt] which will send any format file. Actual Creator of the program is Amit Bisht.
    Thanks & Regards,
    Rock.

  • Using sender file adapter to read the most current file

    Hi,
    in my sender file adapter , i have to read the latest file- all files in  the source directory are named as <filename><timestamp>.txt . I need to read the file with the latest timestamp (i.e. the most current file )
    How do i configure this using file adapter.
    thanks

    Hi Sreeram,
    thanks for the answer- but i found that the option can only be used with NFS transport protocol. what if i am using FTP ?
    alos, by date option means- files are processed according to their time stamp in the file system, starting with the oldest file.
    However in my case i only want to read the latest file and ignore the older files.
    Thanks

  • How to send  Million records using  Open hub using  into my own file server

    hi
    i am using OPEN HUB process to send  6 miilion record to my own network server. is there any limitaiton how i need to go about that? my process is failing when i execute DTP openhub. i am abel to send few records to sap aplication server.
    did any body send  more than million records to aplication server out side SAP ? how to achieve this. pelase help me out..
    i am trying to send ods records into file server

    I'm glad you solved your problem.
    Generally it is nice to post how you solved your problem so that when others have a similar problem and search the archives, they can see your solution.
    Thanks

Maybe you are looking for