File Serving/Shares and vhdx

On a 2012R2 guest OS that is going to be a file server...(low I/O really for our smb)
Should I make one big VHDX attached to the guest to host say 7 shares...
Or should I logically split them up into separate vhdx files, but not 7 different ones as I would like to group them together into say maybe 4.
This is mainly for logical organization and isolation. I was curious to any negative effects from doing it that way.
I mean I wouldn't like a bunch of smaller vhdx files, but I'm not sure if I want one big one either.
I wouldn't mind having the engineering share as it's own vhdx though.

Go with one VHDX putting shared folders on it. There's no point with deploying multiple ones, you're not going to have better performance or security, you'll just make whole management more complicated.
StarWind VSAN [Virtual SAN] clusters Hyper-V without SAS, Fibre Channel, SMB 3.0 or iSCSI, uses Ethernet to mirror internally mounted SATA disks between hosts.

Similar Messages

Enumerate File Server Shares and Associated Number of Connections

Please help!
My scenario: I have a mixed Windows 2003 & 2008 file server estate and i need to establish what shares are published on each server and the associated number of active connections, just like what the "Shares" section in computer management
gives me.
I'd like to do this via some sort of script so I can then have a choice of what to do with the output, the interface won't give me the flexibility I need. There seems to be a lot of scripts & help out there but nothing seems to quite give me what
I need e.g. I can enumerate the number of shares in a variety of ways but then can't figure out what i need to do to report the number of open connections, I've also found ways to report on the number of open sessions but then can't figure out how to get more
granularity on individual shares. Driving me a bit crazy right now as I'm probably near but due to my aged scripting abilities I just can't figure it out
Any ideas? BTW PowerShell isn't installed on my Windows 2003 estate and it isn't practical to deploy/install it.
Thanks in advance.

Simple one-stop shopping for share info is here:
https://technet.microsoft.com/en-us/library/jj635704.aspx
¯\_(ツ)_/¯

Server 2012 R2 SMB - The process cannot access the file '\\server\share\test.txt' because it is being used by another process.

Hi,
We are having issues with Server 2012 R2 SMB shares.
We try to write some changes to a file, but we first create a temporary backup in case the write fails. After the backup is created we write the changes to the file and then we get an error:
The process cannot access the file '\\server\share\test.txt' because it is being used by another process.
It looks like the backup process keeps the original file in use.
The problem doesn't always occur the first time, but almost everytime after 2 or 3 changes. I have provided some code below to reproduce the problem, you can run this in a loop to reproduce.
The problem is that once the error arises, the file remains 'in use' for a while, so you cannot retry but have to wait at least several minutes.
I've already used Process Explorer to analyze, but there are no open file handles.
To reproduce the problem: create two Server 2012 R2 machines and run the below code from one server accessing an SMB share on the other server.
Below is the code I use for testing, if you reproduce the scenario, I'm sure you get the same error.
We are not looking for an alternative way to solve this, but wonder if this is a bug that needs to be reported?
Anybody seen this behavior before or know what's causing it?
The code:
string file =
@"\\server\share\test.txt";
if (File.Exists(file))
File.Copy(file, file +
".bak", true);
File.WriteAllText(file,
"Testje",
Encoding.UTF8);
The error:
System.IO.IOException: The process cannot access the file '\\server\share\test.txt' because it is being used by another process.

Hi,
There is someone else having the same issue with yours. You could try code in the article below:
“The process cannot access the file because it is being used by another process”
http://blogs.msdn.com/b/shawncao/archive/2010/06/04/the-process-cannot-access-the-file-because-it-is-being-used-by-another-process.aspx
If you wonder the root cause of the issue, the .NET Framework Class Libraries forum can help.
Best Regards,
Mandy
If you have any feedback on our support, please click
here .
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Impossible to access File server shares using a DNS alias

I am currently testing migration scenarios to replace 2 standalone W2K3 File Servers into 1 W2K8R2 Failover Cluster.
Everything went very well, shares are well accessible as long as I use the new File Server names, but...
... when I try to use DNS aliases (of the old servers), It is getting a nightmare!
First, each time I tried to to connect to the shares using the alias name \\tempsf\ I got an error message prompting for Duplicate name on the network.
I solved this first issue by applying the DisableStrictNameChecking
reg key (see below). The Duplicate name error message disappeared and I was able to access to the \\tempsf\ folder but it was empty however I have 2 shares well displayed when accessing it through the real file server name. Moreover, I confirm that :
ping tempsf resolves correctly the real file server name and IP
nslookup tempsf do the same
net view \\realfileserver displays my 2 shares
net view \\tempsf doesn't display anything :-(
Then, I almost tried everything currently documented :
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\lanmanserver\parameters Add a new DWORD value called DisableStrictNameChecking and set to 1.
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\lanmanserver\parameters Add a new Multi-String value called OptionalNames. Enter one or more aliases, one per line.
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\lanmanserver\parameters Add a new DWORD value called DisableLoopBackCheck and set to 1.
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Lsa\MSV1_0 Add a new Multi-String Value BackConnectionHostNames. Enter one or more aliases, one per line.
And also the SETSPN:
setspn -A host/<your_ALIAS_name> <ServerrName>
setspn -A host/<your_ALIAS_name.domain.com> <ServerNname>
But still nothing... Launch date is approaching, I am feeling so desperate...
Any idea? please... Thanks in advance,
Max
PS : Ahh yes, one more thing, we are using a third-party DNS here (Infoblox) but I don't think it could be the issue.

Hello,
Configure my new File Server (new name, new IP)
Shutdown the old File Server
Map the mirrored SAN disk to the new File Server
Mount Storage and create shares (previously exported from old FS)
Update Alias to point to point to new FS (in Infoblox)
Update Reg keys, setspn and netdom as explained above
Try access. Shares well displayed when using new FS name but nothing when using updated alias despite dns resolution is ok.
I also found the following doc :
http://blogs.technet.com/b/askcore/archive/2009/01/09/file-share-scoping-in-windows-server-2008-failover-clusters.aspx?PageIndex=2#comments which explain precisely the way the W2K8R2 File Servers are working but without giving any solution to my issue.
Your doc was interesting but didn't help :-(
Anyone else ? Thanks

SBS 2008 - Windows 8.1+ clients trouble accessing file server shares

I have now upgraded 1 Windows 8 machine to Windows 8.1, and also clean installed another with Win 8.1 update 1 today, and both machines have trouble accessing the SBS2008 file server shares by UNC. If I browse by IP address of the server it seems to work
flawlessly. The odd thing is that it's sporadic. So if I browse in explorer to "\\*netbiosname*\share" the Win8.1 machine will sometimes be able to access the share, and other times it will fail with a "network unable to reach location etc.."
error. When it does work, it can take up to 5-10 minutes while explorer is frozen before the share is accessed. We're running quite a few Windows 8 machines without a problem, but it seems to be a specific problem with 8.1. Any idea?

This doesn't seem to fix this specific problem. I had a few days of "luck", but now it's back. I just upgraded another co-workers machine to Win8.1 and he advised me that he's been having the same problem even with the above fix applied. His issue
is when opening an office document that's located on the file server using location "\\servername\filename.xlsx", it takes a very long time (minutes) to open the excel file. This was happening to me as well, and if I tried to browse the network during
this period, Windows Explorer would sometimes give me path not found, and unspecified error. I will try and capture a screen of the error when it occurs. Any ideas??
edit: I have also noticed an unresponsive Windows Explorer for a few seconds to a minute over the last few days, which is a pretty good indicator that it's still happening on my machine.
The odd thing is, if I use the IP address of the file server, everything is fine. I changed all of my links to use the IP since October when Win8.1 was released to combat this problem, and only changed them back to the server name for testing since I want
to start deploying Win8.1 to others in the office. Unless I can fix this bug, they'll have to be stuck on Win8.
Thanks,
kk

Remote Server Shares and Permissions...

Hi there...is there any command prompt CMD to view or list the server shares and permission (either Remotely or locally) in Windows environment... Pls let me know...
VT

Hi,
Yes, you can use "ICACLS <path>" to check NTFS permissions (locally on the file server using the local drive or remotely using the UNC path). You could refer to the article below to know more detailed infomation about iCacls.
iCacls
http://technet.microsoft.com/en-us/library/cc753525.aspx
You can use "NET SHARE <sharename>" to check share permissions (locally on the file server).
Net share
http://technet.microsoft.com/en-us/library/bb490712.aspx
Best Regards,
Mandy
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

Cant UNC to file server share from DC

thanks aaron, ill check out the link as well.

Hey Guys.I have 2 Servers. Server1(DC), Server2(File Server).Server1 is Server 2012 running Hyper V, Server2 is a VM running on Server1 (Also server 2012)I can UNC into server2 from all workstations on the network and get access to the shared data files, but i cannot from Server1If i try to access server2 via the IP from server 1, i get in, but only 3 folders show up, folders which have nothing to do with the data shares. The 3 Folders are1) Netlogon 2) sysvol 3) VBRcatalogThe error i get when i try to UNC via name, is as follows;"\\server3 is not accessible. You might not have permission to use this network resource.Contact the administrator of the server to find out if you have permissions.The target account name is incorrect"Any help would be appreciated :/
This topic first appeared in the Spiceworks Community

Connection to file server slow and unreliable after upgrading to Leopard

I have a client with a G5 PowerMac (3 GB memory) who has been connecting reliably to a network file server (Windows based) at her company for years. Upon upgrading to Leopard the connections is slower. Or, rather, opening the root level directory is fast. The second level folder is fast. The third level is fast. Beyond that she gets the spinning cursor and it can take a long time to open, even if there are only a couple files inside. Also, navigating back to the first level I see a spinning cursor and "Connecting..." as though the Mac had lost connection with the file server simply by opening the volume. Sometimes she has to Force Quit the Finder (which reports "not responding". Weird. Any ideas out there?

Hi Greg,
It was my second visit to this company, and it was for something else that I was focussed on. I don't know what kind of server they are running. It's a PC house running Exchange servers so it's probably some kind of Microsoft system. If the problem persists I'l get more info next week when they reopen after the holiday.

MDT Deployment share and SQL Share on different servers

Hello Technet,
I would like help to figure out how to deal with my MDT Deployment share being on a different server than my SQL Share. I am trying to use the MDT Database in MDT 2013 and SQL Server Express 2014. My deployment share is located on a Linux File Server share,
and my MDT Server and SQL Express Server are located on the same Windows Server 2012 VM.My Bootstrap.ini therefore looks like this:
[Settings]
Priority=Default
[Default]
SkipBDDWelcome=YES
DeployRoot=\\192.168.1.10\DeploymentShare$
UserID=user
UserPassword=password
my Customsettings looks like this:
[Settings]
Priority=CSettings, CPackages, CApps, CAdmins, CRoles, Locations, LSettings, LPackages, LApps, LAdmins, LRoles, MMSettings, MMPackages, MMApps, MMAdmins, MMRoles, RSettings, RPackages, RApps, RAdmins, TaskSequenceID,Default
[Default]
CaptureOS=YES
[CSettings]
SQLServer=SQLServer
Instance=SQLEXPRESS
Database=MDT
Netlib=DBNMPNTW
SQLShare=Logs
Table=ComputerSettings
Parameters=UUID, AssetTag, SerialNumber, MacAddress
ParameterCondition=OR
Therefore, the problem is that during winPE Bootup, WinPE connects to the deploymentshare using the provided credentials just fine, and tries to process customsettings. However, I can map a network drive to the SQL Share as seen in the logs by the following
errors:
1.ERROR-Unable to map a network drive to \\SQLServer\Logs
2. ZTI Error opening SQL Connection:[DBNETLIB][ConnectionOpen(Connect()).]SQL Server does not exist or access is denied.
3.Unable to establish database connection using [CAPPS] properties.
In WinPE, as soon as I hot F8, and use net use \\SQLServer\Logs, the deployment works fine and the properties are read from the database during each section process..
Why is MDT Unable to map the \\SQLServer\Logs , and it requires the manual use of net use? Must I move the deployment share to the same server as my SQL Server Server? Thanks so much.

Should work, Don't know why it's failing.
Can you post your full bdd.log file to a public site like OneDrive and share the link?
There are some inconsistencies with your written summary above.
Keith Garner - Principal Consultant [owner] -
http://DeploymentLive.com

High availability for file server and exchange with 2 physical servers

Dear Experts,
I have 2 physical server with local disks only. I want to setup below on same with high availability, please advise best prossible options. We will be using windows 2012 R2 Server..
1. Domain controller
2. Exchange 2013
As of now I am thinking of setting up below:
1. Install Hyper-v on both and create 3 VM on each as
-On Host A- 1 VM for DC, 1 VM for File server with DFS namespace and replication for file server HA and 1 VM for Exchange 2013 with CAS/MBX with DAG and DNS RR for Exchange HA
-On Host B - 1 VM for ADC, 1 VM for File server DFS member for above and 1 VM for Exchange 2013 CAS/MBX with DAG member
I have read on internet about new features called scale out file server (SoFS) in Windows 2012 Server but not sure that will be preferred for file sharing.
Any advise will be highly appreciated..
Thanks for the help in advance..
Best regards,

Dear Experts,
I have 2 physical server with local disks only. I want to setup below on same with high availability, please advise best prossible options. We will be using windows 2012 R2 Server..
1. Domain controller
2. Exchange 2013
As of now I am thinking of setting up below:
1. Install Hyper-v on both and create 3 VM on each as
-On Host A- 1 VM for DC, 1 VM for File server with DFS namespace and replication for file server HA and 1 VM for Exchange 2013 with CAS/MBX with DAG and DNS RR for Exchange HA
-On Host B - 1 VM for ADC, 1 VM for File server DFS member for above and 1 VM for Exchange 2013 CAS/MBX with DAG member
I have read on internet about new features called scale out file server (SoFS) in Windows 2012 Server but not sure that will be preferred for file sharing.
Any advise will be highly appreciated..
Thanks for the help in advance..
Best regards,
DFS is by far the best way to implement any sort of file server. Because a) failover is not fully transparent and does not happen always (say not on copy ) b) DFS cannot replicate open files so if you edit a big file and have node rebooted you're going to
lose ALL transactions/updates you've applied c) actually slows down the config. See:
DFS for failover
http://help.globalscape.com/help/wafs3/using_microsoft_dfs_for_failover.htm
DFS FAQ
http://technet.microsoft.com/library/cc773238(WS.10).aspx
(check "open files" point here)
DFS Performance
http://blogs.technet.com/b/filecab/archive/2009/08/22/windows-server-dfs-namespaces-performance-and-scalability.aspx
SoFS a) requires shared storage to run and you don't have one b) does not support generic workloads
(only Hyper-V and SQL Server) and c) technically makes sense to expand SAS JBOD or existing FC SAN to numerous Hyper-V clients over 10 GbE w/o need to invest money into SAS switches and HBAs and FC HBAs and new licenses FC ports. Making long story short:
SoFS is NOT YOUR CASE.
SoFS Overview
http://technet.microsoft.com/en-us/library/hh831349.aspx
http://www.aidanfinn.com/?p=12786
http://www.aidanfinn.com/?p=12786
For now you need to find some shared storage to be a back end for your hypevisor config (SAS JBOD from supported list, virtual SAN from multiple vendors like for example StarWind see below, make sure you review ALL the vendors) and then you create a failover
SMB 3.0 share for your file server workload. See:
Clustered Storage Spaces over SAS JBOD
http://technet.microsoft.com/en-us/library/jj822937.aspx
Virtual SAN from inexpensive SATA and no SAS or FC
http://www.starwindsoftware.com/native-san-for-hyper-v-free-edition
Failover
SMB File Server in Windows Server 2012 R2
http://www.starwindsoftware.com/configuring-ha-file-server-on-windows-server-2012-for-smb-nas
Fault
tolerant file server on just a pair of nodes
http://www.starwindsoftware.com/ns-configuring-ha-file-server-for-smb-nas
For Exchange you use SMB share from above for a file share witness and use DAG. See:
Exchange DAG
Good luck! Hope this helped :)
StarWind VSAN [Virtual SAN] clusters Hyper-V without SAS, Fibre Channel, SMB 3.0 or iSCSI, uses Ethernet to mirror internally mounted SATA disks between hosts.

Chmod to propagate permissions in OS X Panther server share

i know this has kind of been covered before, but it is hard to understand all the details
basically i have 2 panther servers and the permissions for some of the shares get messed up from time to time. someone will create a folder on their desktop and then copy it to the server, and will keep the permissions from the user workstation rather than the enclosing folder in the server....
so what i do now is manually go through all of the server shares in workgroup manager and tell it to copy the permissions from the top level of the server share on down. we don't have that many shares so it isn't too time-consuming, but i was thinking it would be great to have a script to do this in the terminal
basically i want something like this
chmod -R 777 <server share>
and i'd need to put it into a chmod on a daily basis... which is another story. i think i have enough info about this to get started once i figure out how chmod works
if anyone has a link for an explanation of how to do this in simple engrisch please pass it along,. all the detailed info is a bit over my head.
thanks
bob

Open the Script Editor in the /Applications/AppleScript/ folder and enter the following:
do shell script "chmod -R a+rwX '/server share/'"
with the name and path of the server share inserted between the single quote marks. If the path contains a double quote, precede that quote with two backslashes, and a backslash in the path needs to be preceded by another. You can duplicate the line to work on multiple shares. If you get a message saying you're not allowed to do this, add
password "yourpass" with administrator privileges
to the end of the line. Enter your actual password between the double quote marks. This script can be saved as an application and then used to correct the permissions on the shares with a double-click. The X option will set the item permissions to 6 if the item it's acting on is a file, or 7 if it is a folder or if the permissions are already an odd number. This prevents the execute bit from being set on items where it shouldn't be.
(13669)

Apple file server crashes constantly

I connect my xserver to m$ AD and use acl's - this seems to work fine until recently. I have started to use the acl's to deny permissions to certain directories. Now i seem to constantly get apple file server errors and it randomly kicks everyone off the server every morning - if i restart all will work until the following morning.
Initially i thought it was because there was no slapd.conf - fixed this and all seemed well. However now am getting this issue:
com.apple. (com.apple.AppleFileServer Exited abnormally Bus error
more detial here:
Process: AppleFileServer [26022]
Path: /usr/sbin/AppleFileServer
Identifier: AppleFileServer
Version: ??? (???)
Code Type: X86 (Native)
Parent Process: launchd [1]
Date/Time: 2009-04-14 10:01:44.384 +0100
OS Version: Mac OS X Server 10.5.6 (9G71)
Report Version: 6
Exception Type: EXCBADACCESS (SIGBUS)
Exception Codes: KERNPROTECTIONFAILURE at 0x0000000000000015
Crashed Thread: 84
Thread 0:
0 libSystem.B.dylib 0x965c26f2 select$DARWIN_EXTSN + 10
1 AppleFileServer 0x000720cb OSRef<AFPRequest>::OSRef(AFPRequest*) + 2345
2 AppleFileServer 0x0003264d OSRef<SessionManager>::operator=(OSRef<SessionManager> const&) + 2245
3 AppleFileServer 0x000443a9 OSTreeProtected::~OSTreeProtected() + 433
4 AppleFileServer 0x00044483 OSTreeProtected::~OSTreeProtected() + 651
5 AppleFileServer 0x00042158 OSRef<FPVol>::OSRef(FPVol*) + 1082
6 AppleFileServer 0x00001ffe 0x1000 + 4094
Thread 1:
0 libSystem.B.dylib 0x965731c6 machmsgtrap + 10
1 libSystem.B.dylib 0x9657a9bc mach_msg + 72
2 com.apple.CoreFoundation 0x924980ae CFRunLoopRunSpecific + 1790
3 com.apple.CoreFoundation 0x92498d34 CFRunLoopRun + 84
4 AppleFileServer 0x0003578d OSRef<FPCNode>::~OSRef() + 1105
5 AppleFileServer 0x000443a9 OSTreeProtected::~OSTreeProtected() + 433
6 AppleFileServer 0x00044483 OSTreeProtected::~OSTreeProtected() + 651
7 libSystem.B.dylib 0x965a4095 pthreadstart + 321
8 libSystem.B.dylib 0x965a3f52 thread_start + 34

Rik,
Unfortunately, I and several others have this issue as well. Apple has been notified, and all requests for updates result in "there is no new information at this time". 10.5.7 did not fix the issue for me.
The only "fix" that someone I know has had is to remove the "deny all" acl from all the share points/directories. Apple has been notified of this "fix" and considers it an "unacceptable workaround".
At this point, a few of us are working to escalate, but considering we notified them months ago about this, I have little hope this'll get fixed before 10.6. =(
Please do keep us posted if you figure out anything.
btw, here's my old thread on this: http://discussions.apple.com/thread.jspa?messageID=8857952
None of the solutions posted helped, what-so-ever.
Message was edited by: [email protected]

Reading .txt file Server side

How do you read a file server side and send it to the client. I am getting confused with FileReader and the fact that you have to wrap a socket with PrintWriter, BufferedWriter and OutputStreamWriter i.e.
BufferedReader in = new BufferedReader(new InputStreamReader(socket.getInputStream()));
Any ideas

Assuming you want to read from a file on the server and write to a client socket:
FileReader fi= new FileReader("reading.txt");
BufferedReader br= new BufferedReader(fi);
String il=br.readLine();
ServerSocket sock= new ServerSocket(port,mcons);
PrintStream dout=
new PrintStream (sock.getOutputStream());
dout.println(il);
dout.flush();...
Hope this helps.

Can you upload to a file system directly and not to wwv_flow_file_objects$

The following link shows how to upload a file. These files that are uploaded are stored in a table called wwv_flow_file_objects$ .
However what if I want to upload a file but save it to the file system (share) and not put it into wwv_flow_file_objects$ is that possible
http://download.oracle.com/docs/cd/B31036_01/doc/appdev.22/b28839/up_dn_files.htm#CJAHDJDA
When you use the file upload item type, the files you upload are stored in a table called wwv_flow_file_objects$

It has to be loaded to wwv_flow_file_objects$, but you can use the
UTL_FILE package to write it to a directory the database has access to. Use FOPEN with open_mode wb and use the PUT_RAW procedure to write into the file. Use READ procedure of the DBMS_LOB package to read your BLOB in junks.
UTL_FILE: http://download.oracle.com/docs/cd/B19306_01/appdev.102/b14258/u_file.htm#i1003526
DBMS_LOB: http://download.oracle.com/docs/cd/B19306_01/appdev.102/b14258/d_lob.htm#i999170
I think that should work.
Patrick
My APEX Blog: http://inside-apex.blogspot.com
The ApexLib Framework: http://apexlib.sourceforge.net
The APEX Builder Plugin: http://sourceforge.net/projects/apexplugin/

Windows 2012 Failover Cluster - File server role (vCO)

Hi,
I wonder if anybody can shed some light on a query i have.
A windows 2012 failover cluster will be built in AD domain example.uk. Cluster File server roles will be created and will reside in this domain also.
We also have a requirement to run a cluster file server role in the child domain off secure.example.uk. Is this possible? or do the file server roles and related vCO's have to reside in the same domain as the cluster (CNO).
I know the CNO can be used to create the VCO but could a prestage a VCO in the child domain of secure.example.uk.
Mark

Hi Mark,
By default CNO will create
VCO automatically in default domain computer OU, we generally use the
KISS principle to place the CNO and VCO to the same OU, and as far as I know there no known design document indicate the VCO can be placed in different domain, therefore I suggest you place the CNO and V CO at same OU.
More information:
When Creating a New Resource or Role in Windows Server 2012 R2 Failover Cluster, the Network Name Fails to Come Online or Failed to Create Associated Computer Object in Domain
http://blogs.technet.com/b/askpfeplat/archive/2014/11/17/when-creating-a-new-resource-or-role-in-windows-server-2012-r2-failover-cluster-the-network-name-fails-to-come-online-or-failed-to-create-associated-computer-object-in-domain.aspx
CNO Blog Series: Increasing Awareness around the Cluster Name Object (CNO)
http://blogs.technet.com/b/askcore/archive/2012/09/25/cno-blog-series-increasing-awareness-around-the-cluster-name-object-cno.aspx
How to Create a Cluster in a Restrictive Active Directory Environment
http://blogs.msdn.com/b/clustering/archive/2012/03/30/10289577.aspx
Prestage Cluster Computer Objects in Active Directory Domain Services
https://technet.microsoft.com/en-us/library/dn466519.aspx
I’m glad to be of help to you!
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

File Serving/Shares and vhdx

Similar Messages

Maybe you are looking for