File to IDOC. Mapping doubts...

Hi XI Gurus..
I'm doing a file to IDOC scenario.. I've a filed called Master Number and Sequence number..
First I've to sort the file based on Master number. based on this sorted file I must sort the sequence numbers.
For example:
0011232      01
0011232      00
0011231      01
0011232      01
0011231      00
after first sort
0011232      01
0011232      00
0011232      01
0011231      01
0011231      00
after second sort
0011231      00
0011231      01
0011232      00
0011232      01
0011232      01
Now in mapping I must create one IDOC for every set of Master number. In the IDOC a segment must repeat for every sequence number.. i.e For 0011231 there must 2 sequence segments i.e 00 and 01, and 0011232 also must have 2 sequence segments i.e 00 and 01

hi,
please try the following mapping,
for creating the IDOC based on Message Number
message No-->removecontext->sort>spiltbyvalue(for value change)-->collapscontext---->EDIDD(IDOC TAB).
to create the SEGMENT based on the Sequence number please try the following mapping.
Sequence no-->removecontext---->sortbykey(key as messageNo)
>formatbyexample(first queue is message no and second queue is sequence no)---->splitbyvalue(for each value)-->segment(IDOCsegment).
regards,
navneet

Similar Messages

File to idoc mapping error

Hi,
I am mapping a flat file to idoc in xi. If I execute the test data it works fine. But in actual run, it gave me the following mapping error:
com.sap.aii.utilxi.misc.api.BaseRuntimeException thrown during application mapping com/sap/xi/tf/_MM_MT_APPayment_to_FIDCCP02_: Runt
imeException in Message-Mapping transformatio~
Exception of class CX_XMS_SYSERR_MAPPING
Is it due to some mapping error or some basis config issue?
Thanks,
Jassi

Hi Jassi,
This may be a mapping issue, try this:
a)in interface mapping see if grids are formed at source and target after executing the test option,
b)also take the xml of the idoc from sxmb_moni , copy it and paste it at the source of the mapping ( use the src tab now) and execute the mapping, is your file structute formed?
Check the following link:
/people/michal.krawczyk2/blog/2005/09/16/xi-how-to-test-your-mapping-in-real-life-scenarios
Amaresh

File to Idoc Mapping Problem

Hi all,
i'm getting an error from SXMB_MONI in a scenario File to Idoc.
I have done the mapping from source file and Idoc CREMAS03, when i try to test from Integration Repository it's all ok, but when the scenario is executed i find this error in Idoc Adapter :
<SAP:P1>MSGGUID EF7E2140A08811DDBE1202004C4F4F50: Tag #TEXT found instead of tag IDOC BEGIN=</SAP:P1>
The field BEGIN in idoc structure is filled with constant value 1, than i dont understand the error.
This is the xml source file :
<?xml version="1.0" encoding="UTF-8" ?>
- <ns0:Vendor xmlns:ns0="urn:tbit40:workshop:group01:legacy">
- <Address>
<Country>IT</Country>
<Zip>001</Zip>
<City>ROMA</City>
<Street>SATTA</Street>
</Address>
<Currency>USD</Currency>
<SearchTerm>TEST</SearchTerm>
<LastName>GUIDA</LastName>
<VendorNumber>44332</VendorNumber>
</ns0:Vendor>
Any help is really appreciated.
Thanks.

Hi all and thanks for your answer.
My problem is that for what i can see all Idoc attribute (like the attribute BEGIN) are mapped with constant value.
In taget source i can see : BEGIN = Constant([value=1])
What i dont understand is why when i execute the scenario it ends with this message :
<SAP:P1>MSGGUID EF7E2140A08811DDBE1202004C4F4F50: Tag #TEXT found instead of tag IDOC BEGIN=</SAP:P1>
It seem to me that the tag BEGIN is not filled with value, i also tried to copy the source xml file directly from SXMB_MONI (from payload) and test it in Integration Repository mapping section, but here is all ok and the test end succesfully.

File to idoc mapping

Hi all
I dont know much about idocs. I am creating a file to idoc scenario. i have done with(hope so) all the other settings, design and configuration. BUt dont know how to do the mapping.how the control segment fields have to be mapped. what are the mandatory fields in idoc?

Hi Aarthi,
You can leave the control records of the Idoc blank since XI fills them up. This is because XI would be the sender for the idoc. If you select "Header mapping" then you have to map control records else not.
Also in the idoc data segments all fields with a red dot are mandatory. If you do not have a field from the file to map with the mandatory idoc field then either you can suppress it or map it to a constant.
Hope this helps.
Regards.

FILE TO IDOC MAPPING Query

Hi Experts
I have facing some confusion when i am doing mapping for my scenario FILE to IDOC.
The IDOC Structure is as follows
HeaderRecord 0-1
DataRecord1   0-unbounded
     (Subnode)DataRecord2 0-unbounded
      (Subnode)DataRecord4   0-unbounded
DataRecord5 0-unbounded
      (subnode) DataRecord6 0-unbounded
TrailerRecord 0-1
when the DataRecord1 is executed, an idoc is generated and all the DataRecord2,DataRecord4,DataRecord6 shld come under that particular Idoc. And when another Idoc is generated,all the DataRecord2,DataRecord5,DataRecord6 shld come under that particular Idoc.
How to achieve mapping for this??
please help me out.
Edited by: vemuganti naga phalguna on Oct 27, 2010 7:56 AM
Edited by: vemuganti naga phalguna on Oct 27, 2010 7:59 AM

Hi
1) Source file is Text File.
sample source data.
A|20101006142345|SAPQMP|40|
B|5999|R00003D||N|20072008|Unknown|
C|T0014|M1556||colourless Pale yellow||Receipt-Bulk|1|Yes|Y|Text||
C|T0001|M1556||Limpid liquid ||Receipt-Bulk|1|Yes|Y|Text||
C|T1379|M1398|18||23|Receipt-Bulk|1|Yes|Y|Number|mm²/s|
B|5998|R00014A||N|20072008|Unknown|
C|T0014|M0211||2.0||CoA|1|No|Y|Text||
C|T0014|M0211||2.0||Receipt-Bulk|1|No|Y|Text||
C|T0014|M0211||2.0||Transfer|1|No|Y|Text||
C|T0051|M0271|97|||CoA|1|No|Y|Number|None|
C|T0073|M1356|Pass|||Receipt-Bulk|1|No|Y|||
C|T0073|M1356|Pass|||Transfer|1|No|Y|||
C|T0025|M0331||0.880||CoA|1|No|Y||g/ml|
C|T0025|M0331||0.880||Receipt-Bulk|1|No|Y||g/ml|
C|T0025|M0331||0.880||Transfer|1|No|Y||g/ml|
C|T0001|M1556||Clear & Bright ||CoA|1|No|Y|Text||
C|T0049|M0341|28.0||32.0|CoA|1|No|Y|Number|mm²/s|
C|T0049|M0341|28.0||32.0|Receipt-Bulk|1|No|Y|Number|mm²/s|
C|T0049|M0341|28.0||32.0|Transfer|1|No|Y|Number|mm²/s|
C|T0042|M0422|||-15|CoA|1|No|Y||°C|
C|T0092|M0578|||16|CoA|1|No|Y|Number|% Loss|
C|T0021|M0199||||CoA|1|No|Y||minutes|
C|T0039|M1453|Mktble|||CoA|1|No|Y|||
C|T0050|M0341||5.1||CoA|1|No|Y|Number|mm²/s|
C|T0050|M0341||5.1||Receipt-Bulk|1|No|Y|Number|mm²/s|
C|T0050|M0341||5.1||Transfer|1|No|Y|Number|mm²/s|
C|T0026|M0412|210|||CoA|1|No|Y|Number|°C|
Z|20101006142355|SAPQMP|40|
where Records A indicate File Header, Z indicates File Trailer
Recodrs B indicateds Material header and Would be repeating multiple times
No. of B Records = No. of Idocs generated with corresponding C records data which indicates Component Rows (multiple)
i.e as many B records file contains, that many Idoc will be created
For Mapping I require B and C Records. Field Separator is Pipe | symbol
I need to Ignore A B C Z
How to define the source structure and the respective FCC Parameters
please help me out

File to IDOC mapping - Message Type WMMBXY

Hi
   I am working on FILE to IDOC Scenario. I have records like the following in my file:
301 ABC455559 03.11.2009 02u0391B13 01     OBAF515150 G378378 15 PC   20090311 MIGO
301 ABC455560 03.11.2009 02u0391B13 01     OBMN515040 437482 50 PC   20090311 MIGO
Using an ABAP Program I added DTL in front of every record as I have to convert text file to XML mapping.
DTL 301 ABC455559 03.11.2009 02u0391B13 01     OBAF515150 G378378 15 PC   20090311 MIGO
DTL 301 ABC455560 03.11.2009 02u0391B13 01     OBMN515040 437482 50 PC   20090311 MIGO
When I did this my mapping is fine from source side. For the above two records there are two records created in xml format. But only one record is created at target side. I changed message type WMMBXY to unbounded in the external message but still only one idoc is created.
Please let me know if anyone faced the same issue.
Thanks
Naga

1..Please mapping ur sorce node (has occurance 0..unbound) with target node.
2...change occurance in message tag in mapping for IDOC message
3...change occurance in message mapping for IDOC message
Regards,
Manisha

Flat File to IDOC Mapping requirement to generate Multiple Segments

Hi Experts,
I got a requirement were i have 2 records in a file and i need to generate 2 IDOCs with multiple segments in it.
FILE :
10/01/2010     101 KRNA     ic_quantity          30-0257     3526     1     1     ea     110000     10
10/01/2010     101     KRNA     ic_quantity          90-0005     3526     1     2     ea     110000     10
Idoc should generate 2 IDOCs with multiple segments as shown below
I have imported the IDOC and changed the occurrence to " unbounded "
The Basic IDOC Type : WMMBID02
I need to generate Multiple segments of E1MBXY1
i.e.., First IDOC should contain two E1MBXY1 segments
         Second IDOC should contain Four E1MBXY1 segments
IDOC1 :   WMMBID02
Segment :   E1MBXY1( 2 segments)
10/01/2010     101     KRNA     ic_quantity          30-0257     3526     1     1     ea     110000     10
10/01/2010     101     KRNA     ic_quantity          90-0005     3526     1     2     ea     110000     10
IDOC2 : WMMBID02
Segment : E1MBXY1 ( 4 segments)
10/01/2010     101     KRNA     ic_quantity          30-0257     3526     1     1     ea     110000     10
10/01/2010     101     KRNA     ic_quantity          30-0257     3521     1     1     ea     110000     10
10/01/2010     101     KRNA     ic_quantity          90-0005     3526     1     2     ea     110000     10
10/01/2010     101     KRNA      ic_quantity          90-0005     3521     1     2     ea     110000     10
Can anyone suggest me how to generate IDOCs with multiple segments
what are multiple ways of generating it
Whether it can be achieved using Multi-mapping or I need go for UDF
If any one has done has done this type of requirement ,please share the points.
Thanks
Sai

Basically you need to generate idoc per record in the flat file. During fcc conversion you convert flat file to xml structure at the sender side. In the mapping use xml file structure source and idoc as receiver structure. You just export idoc and update the idoc segment 1 to unbounded. Please follow the michael blog for file to idoc multimapping without bpm. Yes without bpm it is possible.
see this link... This will answer your requirement.
https://wiki.sdn.sap.com/wiki/display/XI/File%20to%20Multiple%20IDOC%20Splitting%20without%20BPM
>Whether it can be achieved using Multi-mapping or I need go for UDF
you dont need udf for this.

Query on Context Handling ( File to IDOC mapping )

Hi All,
I've a scenario from file to IDOC. The structure of file is as follows.
Struct ( occurs unbounded times )
|
- Name
Str. of IDOC
Node
|
- name1
- name2
- name3
- name4
The problem is that the name in file can occur many times.
So if say name occurs 2 times in the file then it has to be mapped to name1 and name2 in IDOC.
If Name in file occurs 3 times it'll be mapped to name1, name2 and name3 in IDOC.
Am looking for some help.
Thanks,
Joe.

Hi Joe,
For every name in the file, you will have to map the value to the name field in the IDoc. Use SplitByValue node function available in the graphical editor. You will be able to achieve this mapping. For more about the usage, here's the documenation and a blog(where an example has been given):-
http://help.sap.com/saphelp_nw04/helpdata/en/21/3bb8c495125e4eb5969f0377885fe0/frameset.htm
/people/sravya.talanki2/blog/2005/12/08/message-mapping-simplified-150-part-ii
Regards,
Sushumna

Issue in segment creation for File to IDOC mapping

Hi,
I have file with many feilds, i need to create a segment in IDOC for unique combination of 2 feilds.
eg:
408
430050
segment
208
430050
segment
208
430050
208
460100
segment
208
452010
segment
408
432000
segment
208
432000
segment
the value for the combination of first column and 2nd column are equal it should trigger one segment instead of 2segments else(for different combination) trigger the segment
eg from table:
in table for 208,430050 is occuring twice but it should trigger only one segment(unique combinations of 2 columns), for all other combinations it should trigger one segment for each.

Hi Swapna,
You can use below mapping.
UDF:
Execution type : All Values Of Context
public void removeDuplicates(String[] context, ResultList result, Container container) throws StreamTransformationException{
HashSet<String> hashSet = new HashSet<String>();
 for (int i = 0; i < context.length; i++) {
 if (hashSet.add(context[i]))
 result.addValue(context[i]);
 else {
 result.addSuppress();
Reards,
Praveen.

Flat file to idoc mapping issue

Hi Gurus,
i had a flat file format in sender side as below:
H_ID     TYP_CODE    line_elemet      Quantity
5896 STANDARD                       1.transmitter    1
5896                  STANDARD       2.xxxxxxxxx           1
5896                   STANDARD      3.yyyyyyyyy 2
6895                  STANDARD       1.aaaaaaaaa        1
9436                  STANDARD       1.bbbbbbbbb          4
9436                  STANDARD       2.ggggggggg          3
The above file need to be send to an Idoc.
for which same header_ID values should create only one header segment, under that many a line segments should create as many line items appear on that header_id value.
Here my query is how to suppress the repetetive header values to create onlyone header segment. And how to create as many line_item segments as the number of line items appear.
points obvoius for the response
Thanks in advance,
Sekhar.

About map problem I suggest youn to see the following link that are really helpful to improve knowledge about mapping:
/people/sravya.talanki2/blog/2005/08/16/message-mapping-simplified--part-i
/people/sravya.talanki2/blog/2005/12/08/message-mapping-simplified-150-part-ii
I suggest you to see the following link to learn more about mapping:
Mapping functionality in XI
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/9202d890-0201-0010-1588-adb5e89a6638
SAP Exchange Infrastructure - Graphical_Mapping
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/6658bd90-0201-0010-fbb6-afe25fb398d3
SAP Exchange Infrastructure - Graphical Mapping Exercise
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/fd5ebd90-0201-0010-d697-91374d5b5190
SAP Exchange Infrastructure - Graphical Mapping - Advanced
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/be05e290-0201-0010-e997-b6e55f9548dd
SAP Exchange Infrastructure: Mapping Patterns - Understand Context Handling in Message Mapping - Webinar Powerpoint
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/f59730fa-0901-0010-df97-c12f071f7d3b
SAP NetWeaver Exchange Infrastructure Mapping Troubleshooting - Webinar Powerpoint
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/e01e9400-9e81-2910-20a5-a862945a5e98
Mapping Lookups a RFC API
Mapping lookups - RFC API
XI 3.0 New Mapping Features
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/8a57d190-0201-0010-9e87-d8f327e1dba7
I hope these links will be usefull.
Regards,
Salvatore

Flat file to idoc - mapping

Gurus,
I have a flat txt file of following format
Doc# Whse Item Matnr date code
3256999 WH20 1001 861927 09/12/200713:24 9596 2
3256999 WH20 1002 861928 09/12/200713:24 9596 2
3256999 WH20 1003 861929 09/12/200713:24 9596 2
3257169 WH20 2000 861964 09/12/200713:24 9596 2
The first 2 columns are header fields rest all are item fields. How do i map this to an Idoc, so as to move doc# and whse to header segment and rest of columns to add multiple item segments on the same idoc ? So for above file i should get 2 idocs only.

You can navigate thru these links to get more information:
/people/sravya.talanki2/blog/2005/12/08/message-mapping-simplified-150-part-ii
http://help.sap.com/saphelp_nw04/helpdata/en/ef/df564b6aa24fc9ab0d685460747de5/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/ee/bf9640dc522f28e10000000a1550b0/frameset.htm
Do your want the source and target structures to resemble the structures below?
Source:-
<source_file>
<row_1>
<item_a>
<item_b>
<item_c>
</row_1>
<row_2>
<item_p>
<item_q>
<item_r>
</row_2>
<row_3>
<item_x>
<item_y>
<item_z>
</row_3>
</source_file>
Target:-
<target_idoc>
<item_a>
<item_b>
<item_c>
<item_p>
<item_q>
<item_r>
<item_x>
<item_y>
<item_z>
</target_idoc>
If so, then all you need to do is to use the node function: "remove context" for all the items under your rows. In other words,do the following mapping:-
*source_file mapped to target_idoc
*map each of the items under all the three rows in the following way:-
"source item" mapped to "remove context" (node function) mapped to (corresponding) "target item".
Also check the occurences for each of your variables in both source and target structures.
/people/ravikumar.allampallam/blog/2005/03/03/creating-purchase-order-idoc-through-xi
Regard's
-Prabhakar.A

Help!! - File to Idoc Mapping with Nested structure

Scenario:
I have an inbound file that has three nested records.
eg. A00, B00 and C00. C00 is nested structure of B00 and B00 nested structure of A00. All these structure can repeat N number of times in a file.
How do I map this to IDoc structure that have one segment each for the three structures in the file and nested in the same way.
Question: How is the parent child relationship established?
     Suppose I have a file
     A00 1234 Sam 29
          B00 london LE3 XYZ
          B00 US 123456
                C00 2 XYZ
           A00 5678 Joe 22
        B00 US 23456
     If I make a nested structure and then say in the file conversion properties that A00 go to segA and then B00 go to segB, but then when I come back to A00, how do I move the data to the A00?
Thanks in Advance
Rgds

From what you have layed out, you can create a data type with 3 children, all 1..unbounded cardinality, each containing their own elements. You say they are nested, but the example you gave isn't nested... it's just A's followed by B's followed by C's. If that is the case, you can then use a data type w/ 3 subelements (A, B & C) and each of those is actually a container with the real attributes of that line in your file. (I can email you a schema quickly if you need it)
If you are saying they can occur like this:
A00 1234 Sam 29
B00 london LE3 XYZ
B00 US 123456
C00 2 XYZ
B00 US 23456
C00 2 XYZ
THEN they are nested - ie B's & C's repeat under any A. Then you must create segment B as a subelement of segment A instead of on the same level, then bury C under B. (I find this easiest w/ a text tool rather than inside XI, as I can cut/paste segments where I want them to belong...)
Good luck with setting up content conversion on that file adapter... We have done this a few times, and it can be quite interesting.
If you have trouble with the schema, you can post your email & I can give you a quick example.
Message was edited by: Amanda Derringer

File - XI - Idoc : mapping issue

Hello gurus,
I have a mapping issue:
I have a mapping between FICABillingNotification to FKK_EBS_DOC_TREE
Some fields are mapped one to one, others a mapped to constants.
But for some reason i don't know, not all fields get the right value.
For example:
Working:
Constant 1 --> BEGIN
Constant LS --> RCVPRT (Receiver Partner Type)
Not working:
Constant FILE-->RCVPOR (Receiver Port)
I had an other value the first time i tried it, but now i changed it to FILE but this value is not used by the mapping.
Any help would be welcome
Thanks
Thomas
Edited by: Thomas Pary on May 28, 2008 3:36 PM

This was allready done (sorry i didn't answered that question).
But Ok now i see, that for this RCVPOR the value of the constant "FILE" is mapped, and i can see it in the payload in SXMB_MONI after the mapping. But it isn't populated to the IDoc field :-s
Another problem is, that like the one said above, some of my values are not mapped :
<FICAExternalBilling>
--<DocumentHeader> mapped to EF1KK_EBS_DOC_HEADER
<BillFromId>25001254</BillFromId> mapped to REF_DOC_NUMBER
<PostingDate>20080520</PostingDate> mapped to POST_DATE
<DocumentDate>20080520</DocumentDate> mapped to DOC_DATE
<OriginTypeId>IV</OriginTypeId> mapped to EXT_DOC_TYPE
<ObjectType/>
<ObjectKey/>
<PendingCommitmentGroupID/>
<InvoiceReferenceID/>
<DisputeDocumentReferenceID/>
--</DocumentHeader>
The value of OriginTypeId is not mapped, but the value of DocumentDate and PostingDate are mapped.

File to IDOC Scenario - Doubt in RFC Destination

Hi all,
I m working on a File - IDOC Scenario. I got a IDX1 error Also when I try to import IDOC in IDX2, I got I:000 error message(No more information was given) . When I checked the RFC destination, Test Connection works fine. But Remote Logon didnt work, since the target system is not a Trusted System
Is it necessary to make the Target System, a Trusted System ? (For enabling Remote Logon)

Hi ,
There might be some problem with the R3 user that u r using...
For some versions of R3 it is required that the password be in CAPS for making an RFC connection...
I knw this sounds weird but even i had this problem....
Also chk if the XI user has RFC priviliges..
reward points if helpful
PrashANt

Multiple IDOCs based on multiple fields in File to IDOC mapping

Hello Experts,
     I have a requirement to create multiple IDOCs based on multiple fields.
     Earlier my requirement is to create IDOCs based on ShipID (i.e., for every ShipID new IDOC...I achieved this).
     But now the requirement was to create IDOC based on two more fields like
Source:
     ShipID1
     FieldA with value1
     FieldB with value1
Target :
     1 IDOC to create
and If
Source:
     ShipID1
     FiledA with Value2
     FiledB with Value2
     ShipID1
     FiledA with Value1
     FiledB with Value2
Target:
     2 IDOCs based on FiledA
Like wise IDOC should create for every change in FiledA and FieldB.
If FiledA and FiledB has no changes then create IDOC based on ShipID
please help me in achieving this as this is an urgent requirement.

Hi Prasad -
Just concat all the three fields - shipID1, FieldA and FieldB and
remove contexts
split by value (value changed)
collapse contexts
This way whenever there is a change in any of the above fields you'll have separate IDOC..

File to IDOC With Screenshots

Hi,
I am doing FIle to IDOC scenario but have got stuck in ID part what to take care in Receiver COmmunication Channel and Receiver determinaiton etc and donot know how to test after finishing ID part.
ALso we need to put xml file as input in directory but how we get IDOC activated from, and where to see whether our FIle to Idoc scenario is running fine.?? NOt clear pls help
Surbhi Bhagat

Surbhi
Create Receiver Determination
Sender Service :File system
Sender Interface : Outbound Interface.
Configured Receivers - SAP R/3 system
Interface Determination
Sender Service :File system
Sender Interface : Outbound Interface.
Inbound Interface : IDOC Interface mapping : File to IDOC Mapping
Receiver Agreement
Sender Service : File System
Receiver Service : SAP R/3
Inbound Interface :IDOC
Receiver comm Channel : IDOC Comm.Channel(Receiver)
Don't forget to give the Header mapping.
Give Sender service & Receiver service.
I hope it helps!!!
Best regards,
raj.

File to IDOC. Mapping doubts...

Similar Messages

Maybe you are looking for