File To Long

Hi
I have created a table like
CREATE TABLE TEMP
( "ATTACHMENT" LONG,
"SEQ_NO" NUMBER
I want to upload data from a file to the long column as we do for blob and clob.
how can i do it using stored procedure??
Thanks in advance,
Balaji TK

Iam not able to read the clob or blob from another server.so iam trying to load data in long column

Similar Messages

My Audible Enhaunced files no longer sync to my IPad2 since IOS 5

Anyone else have this issue: My Audible Enhaunced files no longer sync to my IPad2 since IOS 5
At first i could not get any new Audiobooks to sync but when I separated one of the MP3 Audiobook version files from the enhaunced Audible ones it synced the MP3 audio book fine
I am running Itunes 10.5 on Mac OS Lion 10.7.2 and my Ipad2 has IOS 5
I am syncing via itunes on my iMac via a cable as usual
I can play my Audible files in Itunes, so my Audible Account is authorized.
I did not notice this at first as i was listening to a series and the current book i just finished was MP3 but the next was Audible ( the reason for this because of region issues aome books are not available in Australia as Audible but Amazon sells the MP3 version sometimes. so whilst most of my Audiobooks are Audible some are MP3 or CD depending on what I could get.
when i tried to sync it took a long time but no installing tracks was being listed.
to cut a long story short i wiped the Ipad2 and started to reinstall first the Apps then the music and movies and latly the Audiobooks . . .
When i reach the Audio books the problems started again so i tried an MP3 audio book on its own tried to add a Audible file and the sync went into limbo again.
Apples IOS has obviously broken the ability to sync Audible books I had no issues before this and i know the files are ok i listen to a few to check.
It obviously has something to do with Audibles enhaunced format / Audible authorization which worked fine until IOS 5

Update to the Audible sync issue:
I have been in contact with Audible and reported to Apple on this issue
So far many email replies from Audible . . . zero from Apple . . .
Below is Audibles reply
Dear Kelvin,
Thank you for all your information regarding the iPad since the Mac iOS update.
There are many iPad specific issues that have been caused by the iOS5 update. At this time, we are awaiting for Apple to resolve these issues. Apple has told us this issue will be resolved by the next update, although, this release date is still unknown. In the meantime, you will need to transfer your titles via the Audible application. I do apologize for this inconvenience.
I thank you for your patience during this time of inconvenience!
Sincerely,
Monica V.
Audible Customer Support
So in short if you have installed IOS5 and wish to transfer your Audible files to a device ( i assume this issue is not iPad 2 specific) you will have to wait on Apple to fix this issue which according to some developer post they were aware of during beta. Eg you cant sync Audible books to you device via iTunes.
You will have to re-download/download any books you want to listen direct too the Audible App. on your device until Apple gets around to fixing this issue.
If you have to updated and want to sync to your computer i suggest you DON'T INSTALL IOS5 UNTIL APPLE UPDATES IT
Hope this helps
I know it's not a fix only Apple can do that . . . and it's an Audible issue which is not there product . . . . they just have a relationship with Audible. . .
Apple probably hopes people will buy their overpriced Audio books . . .
I have never under stood why anyone would when you can save at least 1/2 the cost and have a bigger selection available to you on Audible
Nuff Said
PS i know i spelt enhanced wrong on my first post but i don't think Apple allows editing of posts
-- Kelvin
MacBytes
http://www.reddit.com/user/MacBytes/
https://twitter.com/#!/CaptainSkurvy
https://plus.google.com/u/0/107817606533013579228

My audio files no longer sync to the in the 5d in camera audio. It did when I bought the program but no longer does I reinstalled and it still will not sync the files recorded on the H4N with the Canon 5D Mark Ii

My audio files no longer sync to the in the 5d in camera audio. It did when I bought the program but no longer does I reinstalled and it still will not sync the files recorded on the H4N with the Canon 5D Mark II Camera.
The program used to import and transcode the Can 5D footage but no longer does. The program freezes often and looses my projects as well. Hard to make a living when your editing program is on strike!

My audio files no longer sync to the in the 5d in camera audio. It did when I bought the program but no longer does I reinstalled and it still will not sync the files recorded on the H4N with the Canon 5D Mark II Camera.
The program used to import and transcode the Can 5D footage but no longer does. The program freezes often and looses my projects as well. Hard to make a living when your editing program is on strike!

.XMP files no longer appear as sidecars--how to clear metadata?

Photoshop CS2 ver 9.0.2
Bridge ver 1.0.4.6
ACR ver 3.7
eMac G4 800 MHz
Mac OS X ver 10.4.9
1 Meg RAM
12 GB available disk space
Bridge and Photoshop are set to save metadata in .XMP sidecar files, but sidecar files no longer appear. That is, up till a few days ago, .XMP files appeared when I opened raw files, but no longer. The drop-down menu is still set to save metadata in sidecar files.
Cannot clear metadata in Bridge. I can select "Camera Raw Defaults" in ACR, but that doesn't clear cropping.
1) How do I return already-stored metadata to .XMP files?
2) How do I get PSCS2 to store future metadata as .XMP files?
3) How do I clear metadata currently stored in ACR/PS database?
4) What did I do to cause system to store metadata in ACR/PS database despite being set to save in sidecar files?
Thanks.
--HC

Noel,
Excellent point. I have no idea. Maybe this was only working for
.PSDs/etc. (which contain the metadata embedded in the file itself[,
right?]). I may have been deluding myself this whole time. It's
possible that it never really worked the way I thought it did to begin with.
But, more specifically, here's the current question: If I have this
file (which is a backup from long ago):
J:\backup of M90\Documents and Settings\philipt\Application
Data\Adobe\CameraRaw\Database
...assuming that drives are currently mapped (by drive letter) the same
way they were when that backup was made), can I just replace the current
file:
C\Documents and Settings\philipt\Application Data\Adobe\CameraRaw\Database
...with the one from J: and expect it to work correctly?
What's the worst that can happen if I do this?
BTW, the file on J: is 2,569 Kb; the (new) one on C: is 2,754 Kb. This
doesn't seem to bode well, since the old one (J:) should have much, much
more data in it (assuming that the "Database" file per se is where the
metadata is stored): the older file has complex,
multi-tiered data for 10s of 1000s of images. "??"
Thanks again for your willingness to help with this!!
Aloha,
-pt

My files no longer sort properly - files beginning with AEIOU come before

My files no longer sort properly - files beginning with AEIOU come first after numbers and special characters, then letters H, K, M-N, P, W, B-D and so on. I click on the column header again and it reverses the sort, but still messed up. This convoluted sort appears in all views. All the letters are grouped together, so all the "a"s, "e"s, etc are being sorted by some algorithm, but it's not alphabetical. I noticed it after installation of Snow Leopard, but it could have been that way before. I did a wipe and load and just imported user settings from Time Machine afterwards. Any suggestions on how I can fix this?

Usually, it is (1) a preference file located here
<user home folder>/Library/Preferences/
In this case, the problem is not just Finder if it also happens in Mail. Unfortunately, there are a lot of preference files.
Or it is (2) a background process that runs when you log in to your account. If it is something that starts automatically, it may be one of your Login Items. You can look at System Preferences Accounts pane +Login Items+ tab. That list shows processes that run when you log in to that account. If you see anything that you no longer need, you should remove it. Look for anything there that might, for whatever reason, change the alphabetical sort order.
Make sure English is selected as language in System Preferences +Language & Text+ pane. It seem improbable that it would not be, but I just noticed there is a setting at the bottom of that pane that says +Order of sorted lists+. Does that have something other than English ?

With my taking any action, my folders and files no longer appear under documents (under Places). Now a folder titled Documents has appeared on my desktop with all my files and folders. What happened?What happened?

With my taking any action, my folders and files no longer appear under documents (under Places). Now a folder titled Documents has appeared on my desktop with all my files and folders. What happened?What happened?

The way I moved from 10.3.9 to 10.5.8 was to use "ditto -rsrc" and copy the user homes and the data share to an external firewire drive. Then did the same in reverse.
I found the key to data and share permissions to make sure that the users had the same UID in Leopard that they had in Panther.
You can then use "sudo rm -rf" to remove any folder from the relocated homes that you want. Remember if you do choose to remove "~/Library" from each users relocated home, you will be removing any iCal calendars, login.keychains, browser bookmarks, custom screensavers and wallpapers, etc.
Users don't really care if they can login and do any work. But there will be much wailing, gnashing of the teeth, and anxiety, if they lose their bookmarks and wallpaper.

Word File Takes Longer and Longer to Save

I’ve been working daily on the same 100-page document for several months. I had no problems with the document under Word 2003. However, under Word 2010 the file grows in size over time, and saving the file takes longer and longer to the point where there
are significant timeouts (Word is “not responding”) whenever an automatic save occurs.
I don't want to diable automatic saves because Word does crash for me on rare occasions, generally if I do something "too fast".
I’ve found a workaround for the problem, and every three weeks or so after the automatic saves have become painfully long I copy the document to the clipboard (except for the last paragraph mark) and then I open a new document based on the relevant template
and I paste the clipboard contents into the new document. I rename the old version of the document and the new version becomes the working version. This reduces the file size (currently around 1.4 MB) by about 150 KB and the problem goes away for another three
weeks.
Certain aspects of my situation are unusual, and these may or may not be relevant to the problem:
At the end of each day I use (via a macro) the Review, Compare feature of Word to compare the document with the previous day’s version to allow me to reread any changes I made to it.
I use various other macros for intelligent page-turning, resizing windows, smart Find, etc.
I maintain the document as a DOC file (Word 97-2003 Compatibility Mode) because I need to share the document with an organization that requires this format.
The document flips back and forth a few times between being a one-column and two-column document.
The document has a table of contents on the last page.
The headings in the document have embedded section and subsection numbers.
The document has numerous embedded SEQ and cross-reference fields.
The document has embedded EMF pictures that were generated by a non-Microsoft application.
The long times to save the file and the temporary solution I’ve found to the problem suggest that some "junk" is accumulating “in” the last paragraph mark. This junk doesn't cause any operational errors, but it slows things down to the point where
the auto-save times out and I temporarily get the distracting "not responding" message. It would be nice if Word could automatically eliminate the junk in the last paragraph mark so that I wouldn’t have to do it manually.
Do you have any suggestions for how I might eliminate the problem?
I'd be pleased to send a copy of the slow-saving file to a Microsoft Word programmer for diagnosis of the problem.
I have up-to-date Windows 7 professional (64 bit) and Word 2010 14.0.6129.5000 (32 bit).
Thanks for your help,
Don Macnaughton

I am experiencing exactly the same save issue, although I cannot use the suggestion of copying to a new document as I have allot of references within the same document and I'm scared that I'll loose them (or mess them up).
It is nearly a year later, did you have any luck?
Francois,
I'm still experiencing the problem. However, I've now converted the document from a DOC to a DOCX, but that made no difference. So every 18 or so days I copy all of the document into a new document except for the last paragraph mark
and the problem goes away for another 18 or so days. For my document this solution is fully reliable although it's less convenient because it's a little complicated and I worry I may make a mistake or some text may be lost in the transition.
So I'm still looking for a solution to the problem. Is there anything unique about your document or your handling of the document that might be the cause of the problem? Are you using macros, Compare Versions, switching back and forth between
one and two columns, or anything else that is common to the features that I list in my first post in this thread?
You might want to try my copying solution as a test while keeping your original document as the official version that you continue to work with. You could then check the test document very carefully to see if my solution works with your
document. You might find that you can trust my solution (or you might not).
By the way, I make sure that the copy worked properly by doing a Compare Versions of the old and new documents. (Surprisingly, sometimes the compare finds very minor differences between the two documents, but usually not.)
If the problem really bothers you, you can hire Microsoft Support, although that will cost you some money. If you do that, please let us know the outcome.
Don Macnaughton

Gif files takes long time to load..!!

Hi,
I found the gif/jpg files takes long time ( more than 5 or 6 seconds depends on size ) to render on JavaHelp viewer EditorPane.. I am using JDK 1.3 / Win 2000 / 256 MB / 1 GHz Pentium. Also found JVM uses 90% of the system resources while loading the pic files. I have noticed it as a JDK 1.3 bug from another thread.
http://forum.java.sun.com/thread.jsp?forum=42&thread=230409
I would like to know is there any other solution for this, keeping my JDK Version as it is?
Thanks
Reji

I would convert your images to JPegs if possible since they are so much smaller in size and therefore load much quicker. I had exactly the same problem but I sorted it out this way. I know it's a pain and it will probably screw up your view, but it will speed up your load time ten-fold and I don't know of any other work around. sorry...

Why are my files no longer downloading?

After converting a PDF into a word document; when I try to download the file nothing happens. So I click on the files tab and select the document I want to download and I get a messsage saying files not found. Why are my files no longer downloading?

What do you have your options set as in a Finder window?
Mine are set as "none" and show up alphabetically.
P.S. That is assuming you are referring to a Finder window? If not, please be a bit more specific.

Can't view files with long file names?

Hi, Im using Mac OSX 10.3.9 and I have a problem viewing files on a server that have long file names (i.e over about 20 characters) they do not show up on my mac but when viewed on a PC computer they are all there. Strange thing is though I have another mac on the same network running exactly the same operating system and version and files with long name can be viewed on that system ?? it is some simple preference does anybody know? Any help would be much appreciated. thank you.

Hi, I tried accessing a test file that I have made up with a long name through a browser and through FTP and cannot see it on either one. I can however see it on the other Mac that I have access to that is running the same OS and version etc... and also this file can been viewed on the PC's that are around me....

Cr2 files no longer work

All of my cr2 files no longer open in camera raw. This is roughly 1000 files.
The setup used to take these 1000 cr2 files was a Canon T3i in conjunction with Capture One and a tethered USB cable.
Suddenly today not a single file can be opened in ACR. I usually just drop the .cr2 file on CS6 in dock and it opens camera raw. I now get the message "Could not complete your request because Photoshop does not recognize this type of file.". If I instead go open cs6 > file > open > enable: camera raw > open.. it says the same thing.
I haven't change anything in my setup. Same camera, same tethered cable, same Capture One...
Even if I did change something, it shouldn't affect the cr2 files I generated 6 months ago?

When I go Help > About Plug-ins > Camera Raw I do not see "About Plug-Ins".

Some audio files no longer playing?

I am half way through an imovie project and recently added audio commentry, however some files no longer play also a few now have a yellow warning triangle?
Im assuming the files are now corrupt or something?
really annoying!, anyone have an idea what the problem is??
Cheers

Hi
I'm assuming the files are now corrupt or something?
I don't
Yellow triangle - indicates that the pointer in iMovie to the Audio file used, no longer is valid.
iMovie - DO NOT Copy the audio You put into Your movie project's at all - only points to where You found it.
E.g. - You insert an Audio-CD and use a tune from this in Your movie - then you need a tune from another CD and Ejects the first one =====> RESULTING IN A YELLOW Triangle - pointer to the tune on Your Audio-CD is broken up on You ejected the CD.
I copy all needed Audio to a dedicated folder first (as I store in a proper place e.g. movie folder in User account) - then I use them into my movie.
The deeper thing is - That there is NO movie in Your Movie Project at all - only a small text document pointing to the material used (video, photos, texts and audio) AND how You want it to be presented AS a Movie.
Only when Shared / Finalized - there is an actual movie created.
This is Non-Destructive non linear Video Editing and how it works.
Yours Bengt W

When exporting from Photos, the panel for naming the file no longer shows up. Why and how do I change so I can name the file what I want?

When exporting from Photos, the panel for naming the file no longer shows up. Why and how do I change so I can name the file what I want?

You don't need to maintain all versions of the upgrade chain, but many of us do in case we need to work on a legacy file. If you want to rmove a version, though, ti should be done BEFORE installing the later one. Just reinstall CS5 and things should get back to normal.

HT1338 I cannot open my existing Pages files any longer. I get a message that my Pages needs to be updated. But when I go to update Pages, I am told I have the latest Pages. Is anyone else having this problem?

I cannot open my existing Pages files any longer. I get a message that my Pages needs to be updated. But when I go to update Pages, I am told I have the latest Pages. Is anyone else having this problem?

Maybe this discussion will help you : https://discussions.apple.com/message/23723460#23723460

Rep-0530 file too long

hi,
i have a query 78617 characters and 1754 lines. in a file it is about 80-84 kb.
if i paste this query on report builder wizard then only a part of this query is pasted..
if i select the option import query then it displays error as rep-0530 file too long. it will be truncated to fit.
is there any limit for query size in reports.. same query runs fine in sqlplus,toad.
regards,
Avinash

Hello,
http://www.oracle.com/webapps/online-help/reports/10.1.2/topics/htmlhelp_rwbuild_hs/rwcontxt/props/pi_sql_query_statement.htm
Value
A valid SELECT statement not to exceed 64K.
Regards

Hyperlinks to local files no longer work

Hyperlinks to local files no longer work in Adobe Reader 11.0.1, but they did prior to the update. We have verified this on multiple machines.
We create a document in Word, add multiple relative links to other files on our local computer, and save as a PDF. The links worked in previous versions, but no longer work in 11.0.1. Does anyone else have this problem?
Links to external websites still work, it's only the links to other local files. We also tried opening the same file in Foxit Reader, and the links worked just fine. Only appears to happen in Adobe Reader 11.0.1.
This is a real pain in the ___!

Hi efrancen,
What exactly happens when you click on the hyperlink. Does it give a message that target was not foud. Can you share the PDF or this taget hyperlink.

File To Long

Similar Messages

Maybe you are looking for