File to Database Using BPM

Hi All,
I am trying to do one of the End-To-End scenarios which are described in the following document published by Mukeshlal Parida https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/5474f19e-0701-0010-4eaa-97c4f78dbf9b
I followed the steps described for the File to Database Using BPM.
I created a software component File Workshop and DB Workshop and created the respective products. I created the appropriate namespaces under the specified products. However, when I go to create the container elements in the Integration Process, I am only able to view and add the Abstract interfaces created in the specific software component where I am creating the integration process.
The instructions are not clear. I am on XI 3.0 (SP16). Any help would be appreciated.
Thanks
Sandeep

Hi,
U can use the abstract interfaces in BPM.
U have to define all the Interfaces as Abstract and use in BPM transformations. The Container elements are specific to the Software component.
From...
Yallabandi.

Similar Messages

Problem with File RFC File scenario without using BPM

Hi all,
I am trying a File RFC File scenario without using BPM with the help of the following thread:
File - RFC - File without a BPM - Possible from SP 19.
The XI system is PI 7.0 sp 12. When I am trying to acheive the above scenario, I am getting wierd results i.e., when I observe in SXI_MONITOR, the message is showing as processed successfully, but when I watch the message status in communication channel monitoring, I am getting the following error:
"Attempt to process file failed with com.sap.aii.af.service.cpa.CPAException: Couldn't retrieve inbound binding for the given P/S/A values: FP=;TP=;FS=DEV120;TS=Test_Service;AN=MI_Invoice;ANS=urn:sap.com:test;"
I am not able to understand what the problem is. By the way, one more thing, is, I have kept the File processing mode as "Delete" in the sender file adapter. But the file is not getting deleted. I think the reason could be because of the above error.
Can any body help me out in getting my problem resolved?
Thanks,
Adithya K

CPA Cache Refresh from the Adapter Engine To trigger a cache refresh from the individual Adapter Framework, open a browser window and enter the following
URL: http://<host>:<port>/CPACache/refresh?mode=<b>delta|full</b>
The Monitoring url is like this: http://<host>:<port>/CPACache
Thanks & Regards,
Farooq.

File to Webservice Using BPM

Dear Friends,
Kindly give me some walkthrough doucment for File to Webservice Using BPM
it is urgent. Kindly help.

/people/arpit.seth/blog/2005/06/27/rfc-scenario-using-bpm--starter-kit
refer that to design your interface. Note that instead of RFC you will require to use a WSDL for the WS call.
Fotr more about WSDL and its usage in a scenario ref:
/people/shabarish.vijayakumar/blog/2006/03/23/rfc--xi--webservice--a-complete-walkthrough-part-1
/people/shabarish.vijayakumar/blog/2006/03/28/rfc--xi--webservice--a-complete-walkthrough-part-2

Is It Possible to store an entire file in database using java?

Hi All,
I am new to Programming. please help he out Is It Possible to store an entire file in database using java? is possible, can u tell me the way to make this success? Thank you in advance.

Thanks PhHein
i got that application. i stored one file in db, and i displayed that in browser. thank u very much.

OutofMemory Error while sending file to database using Web services

I have a file of 30MB to be written to the MySQL database. I am doing this in Axis web services and it gives me the following error:
(I am using Tomcat as the application server and Apache as the web server, Axis 1.3 and MySQL standard 5.0.21 version. I have set the minimum and maximum heap size and it works well without using the web service (just uploading and downloading from the database using a simple java program). Another thing to notice is that I can send a file of almost 10MB size to the database using web service without any problem. But it doesn't work with the 30 MB .)
java.lang.OutOfMemoryError: Java heap space; nested exception is:
     java.lang.OutOfMemoryError: Java heap space
AxisFault
faultCode: {http://schemas.xmlsoap.org/soap/envelope/}Server.generalException
faultSubcode:
faultString: java.lang.OutOfMemoryError: Java heap space; nested exception is:
     java.lang.OutOfMemoryError: Java heap space
faultActor:
faultNode:
faultDetail:
     {http://xml.apache.org/axis/}hostname:dbr221d.dbr.louisville.edu
java.lang.OutOfMemoryError: Java heap space; nested exception is:
     java.lang.OutOfMemoryError: Java heap space
     at org.apache.axis.message.SOAPFaultBuilder.createFault(SOAPFaultBuilder.java:222)
     at org.apache.axis.message.SOAPFaultBuilder.endElement(SOAPFaultBuilder.java:129)
     at org.apache.axis.encoding.DeserializationContext.endElement(DeserializationContext.java:1087)
     at com.sun.org.apache.xerces.internal.parsers.AbstractSAXParser.endElement(AbstractSAXParser.java:633)
     at com.sun.org.apache.xerces.internal.impl.XMLNSDocumentScannerImpl.scanEndElement(XMLNSDocumentScannerImpl.java:719)
     at com.sun.org.apache.xerces.internal.impl.XMLDocumentFragmentScannerImpl$FragmentContentDispatcher.dispatch(XMLDocumentFragmentScannerImpl.java:1685)
     at com.sun.org.apache.xerces.internal.impl.XMLDocumentFragmentScannerImpl.scanDocument(XMLDocumentFragmentScannerImpl.java:368)
     at com.sun.org.apache.xerces.internal.parsers.XML11Configuration.parse(XML11Configuration.java:834)
     at com.sun.org.apache.xerces.internal.parsers.XML11Configuration.parse(XML11Configuration.java:764)
     at com.sun.org.apache.xerces.internal.parsers.XMLParser.parse(XMLParser.java:148)
     at com.sun.org.apache.xerces.internal.parsers.AbstractSAXParser.parse(AbstractSAXParser.java:1242)
     at javax.xml.parsers.SAXParser.parse(SAXParser.java:375)
     at org.apache.axis.encoding.DeserializationContext.parse(DeserializationContext.java:227)
     at org.apache.axis.SOAPPart.getAsSOAPEnvelope(SOAPPart.java:696)
     at org.apache.axis.Message.getSOAPEnvelope(Message.java:435)
     at org.apache.axis.handlers.soap.MustUnderstandChecker.invoke(MustUnderstandChecker.java:62)
     at org.apache.axis.client.AxisClient.invoke(AxisClient.java:206)
     at org.apache.axis.client.Call.invokeEngine(Call.java:2784)
     at org.apache.axis.client.Call.invoke(Call.java:2767)
     at org.apache.axis.client.Call.invoke(Call.java:2443)
     at org.apache.axis.client.Call.invoke(Call.java:2366)
     at org.apache.axis.client.Call.invoke(Call.java:1812)
     at edu.louisville.bcc_ma.ws.lab.LabServiceSoapBindingStub.storeGZIPFile(LabServiceSoapBindingStub.java:472)
     at edu.louisville.bcc_ma.lims.labclient.container.SendGZIPFile.sendFile(SendGZIPFile.java:69)
     at edu.louisville.bcc_ma.lims.labclient.container.LoginContainer.login(LoginContainer.java:58)
     at edu.louisville.bcc_ma.lims.labclient.container.LoginContainer.main(LoginContainer.java:44)

Sorry for the delayed response here, forget to add it to my watchlist. I didn't catch if you were using Java 1.5 or not. Prior to 1.5 the default maximum heap space was 64MB which with the overhead of the appserver might be your problem.
Take a look at http://java.sun.com/j2se/1.5.0/docs/guide/vm/gc-ergonomics.html and the java -Xmx <size> command line option to change the default (I believe the size argument is in bytes, but don't hold me to that). I think you can pass that as a command line option to the startup script, but you should check the doco to see if it needs to be wrapped in some other arg etc.,
I seem to recall running into this same problem a few years back when I had a servlet doing some intense graphics processing on the fly and setting this option fixed the problem.

File to Idocs using BPM

Hi,
Current Interface Flow - File (xml) to Idoc (single Idoc type)
Thirdparty sends a File for Goods Receipt. This file may have multiple orders.
Orders are sorted in an xslt by ORDNUM. Each record has a delivery type (Deliver Type PO or Delivery Type STO). For each order Graphical Message mapping occurs.
In case of PO, inbound delivery number and item number have to be received from ECC via an RFC call and passed to VBELN and POSNR. While in case of STO, source field ORDNUM and ORDITEM are passed to VBELN and POSNR. (RFC call happens only for POs, not for STOs)
In case of STO, TCode will be MB0A.and IDoc would be WMMBXY (As is the case right now)
In case of PO, there may be two cases -
a) There is at least one response from ECC for all the line items inside an order --> in this case TCode will be MB0A and IDoc is WMMBXY .
b) If there is no inbound delivery number for any line item from ECC inside an order --> TCode MB01 will be used and IDoc used is WMMBXY
So for all the above cases Target IDoc is WMMBXY.
Changes to be done - Now File (xml) to Idoc (Two different Idoc types, WMMBXY and DELIVERY03)
Now there is an additional requirement that I will be using an additional IDoc (DELIVERY03) in above case a).
I want to use BPM in this case
1) RFC call in message mapping to get the inbound delivery number (for POs only) (Should be before the message enters BPM)
2) Separating the messages based on IDoc type
3) Interface / Message mapping for each IDoc type
4)Send the message to ECC
Please suggest how to proceed with BPM
Thanks,
Varun
Edited by: Varun Reddy on Feb 4, 2011 4:47 PM

Hi Varun,
Follow this thread... You have answer for this.
This link gives design ideas for your requirement
/people/sudharshan.aravamudan/blog/2005/12/01/illustration-of-multi-mapping-and-message-split-using-bpm-in-sap-exchange-infrastructure
Follow Bhavesh discussion. It might be helpful too
Message Split: File to Multiple IDOC Types

Save file to database using WEBUTIL

Hi,
I have used webutil_file_transfer.Client_To_AS_with_progress to upload files from client to Application Server using Forms 10g
However, now i want to save file in database and not upload to database.
Apart from the problem, I was wondering if there is documentation available on WEBUTIL
Please help

I want to store the file in the database as a BLOB.
Earlier I was uploading to Application Server.
I had used webutil_file_transfer.Client_To_AS_with_progress to upload to Server,
I hope there is a procedure / function similar to Client_To_AS_with_progress in the webutil_file_transfer package

File to RFC using BPM

hey guys
i m doin a synchronous File to RFC scenario using BPM and getting a 'NO receiver found error' in MONI,i checked my File as well as RFC adapter in RWB,the sender File adapter is green,RFC adpater is also green and the receiver file adapter is green but says 'no message processing until now'
i m takin help from the followin blog
/people/arpit.seth/blog/2005/06/27/rfc-scenario-using-bpm--starter-kit
the error in MONI is
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="RCVR_DETERMINATION">NO_RECEIVER_CASE_ASYNC</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>No receiver could be determined</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
I checked SM58 as well but it does not have any error XML messages.
and idea where shuld i check?
i check my mappin by using payload from MONI,mapping is working fine
thanx
ahmad
Message was edited by:
Ahmad ansari

Hi Ahmad,
In which step is the error occurring?
Have you checked your BMP status using SXMB_MONI_BPE?
PS: Usefull link: <a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/e7bc3a5a-0501-0010-1095-eb47159e169c">How To Monitor Integration Process (ccBPM)</a>
Regards,
Sergio

Read XML file into databased using stored procedure

I need to read an xml file into my database using a stored procedure. I looked at a couple of tutorials, but I am kind of lost and am looking for some guidance. I will eventually need to only pull a handfull of the data in based on the USER ID. Any help will be greatly appreciated. I have been given a schema file and an example file of how the data will me sent to me. The schema file is below:
<h1>Schema File</h1>
<?xml version="1.0" encoding="utf-8"?>

<xsd:schema xmlns:xsd="http://www.w3.org/2001/XMLSchema" elementFormDefault="qualified">
<xsd:element name="root">
<xsd:complexType />
</xsd:element>
<xsd:element name="Report">
<xsd:complexType>
<xsd:sequence>
<xsd:element ref="Biller" />
</xsd:sequence>
</xsd:complexType>
</xsd:element>
<xsd:element name="Biller">
<xsd:complexType>
<xsd:sequence>
<xsd:element ref="BillerName" />
<xsd:element ref="BillerIdNumber" />
<xsd:element ref="PartnerInfo" />
</xsd:sequence>
</xsd:complexType>
</xsd:element>
<xsd:element name="BillerName">
<xsd:complexType mixed="true">
<xsd:choice />
</xsd:complexType>
</xsd:element>
<xsd:element name="BillerIdNumber">
<xsd:complexType mixed="true">
<xsd:choice />
</xsd:complexType>
</xsd:element>
<xsd:element name="PartnerInfo">
<xsd:complexType>
<xsd:sequence>
<xsd:element ref="PartnerName" />
<xsd:element ref="PartnerVenderNumber" />
<xsd:element ref="PartnerStreet01" />
<xsd:element ref="PartnerStreet02" />
<xsd:element ref="PartnerCity" />
<xsd:element ref="PartnerState" />
<xsd:element ref="PartnerZip" />
<xsd:element ref="PartnerCountry" />
<xsd:element ref="PartnerActive" />
<xsd:element ref="PartnerContactName" />
<xsd:element ref="PartnerEmailAddress" />
<xsd:element ref="PartnerContactPhone" />
<xsd:element ref="PartnerFaxNumber" />
<xsd:element ref="PartnerUpdateUser" />
<xsd:element ref="PartnerUpdateDate" />
<xsd:element ref="PartnerDocColor" />
<xsd:element ref="PartnerDocDistribution" />
<xsd:element ref="PartnerDocPrinting" />
<xsd:element ref="PartnerDocTiming" />
<xsd:element ref="Delivery" maxOccurs="unbounded" />
</xsd:sequence>
</xsd:complexType>
</xsd:element>
<xsd:element name="PartnerName">
<xsd:complexType mixed="true">
<xsd:choice />
</xsd:complexType>
</xsd:element>
<xsd:element name="PartnerVenderNumber">
<xsd:complexType mixed="true">
<xsd:choice />
</xsd:complexType>
</xsd:element>
<xsd:element name="PartnerStreet01">
<xsd:complexType />
</xsd:element>
<xsd:element name="PartnerStreet02">
<xsd:complexType />
</xsd:element>
<xsd:element name="PartnerCity">
<xsd:complexType />
</xsd:element>
<xsd:element name="PartnerState">
<xsd:complexType />
</xsd:element>
<xsd:element name="PartnerZip">
<xsd:complexType />
</xsd:element>
<xsd:element name="PartnerCountry">
<xsd:complexType />
</xsd:element>
<xsd:element name="PartnerActive">
<xsd:complexType />
</xsd:element>
<xsd:element name="PartnerContactName">
<xsd:complexType />
</xsd:element>
<xsd:element name="PartnerEmailAddress">
<xsd:complexType />
</xsd:element>
<xsd:element name="PartnerContactPhone">
<xsd:complexType />
</xsd:element>
<xsd:element name="PartnerFaxNumber">
<xsd:complexType />
</xsd:element>
<xsd:element name="PartnerUpdateUser">
<xsd:complexType />
</xsd:element>
<xsd:element name="PartnerUpdateDate">
<xsd:complexType />
</xsd:element>
<xsd:element name="PartnerDocColor">
<xsd:complexType />
</xsd:element>
<xsd:element name="PartnerDocDistribution">
<xsd:complexType />
</xsd:element>
<xsd:element name="PartnerDocPrinting">
<xsd:complexType />
</xsd:element>
<xsd:element name="PartnerDocTiming">
<xsd:complexType />
</xsd:element>
<xsd:element name="Delivery">
<xsd:complexType>
<xsd:sequence>
<xsd:element ref="DeliveryType" />
<xsd:element ref="DeliveryContactName" />
<xsd:choice>
<xsd:element ref="ReceivingStreet01" />
<xsd:element ref="ReceivingStreet02" />
<xsd:element ref="ReceivingCity" />
<xsd:element ref="ReceivingState" />
<xsd:element ref="ReceivingZip" />
<xsd:element ref="ReceivingCountry" />
<xsd:element ref="DeliveryEmailAddress" />
<xsd:element ref="DeliveryCompanyId" />
<xsd:element ref="DeliveryUserId" />
<xsd:element ref="DeliveryFormatType" />
<xsd:element ref="SecureType" />
<xsd:element ref="SecureQuestion" />
<xsd:element ref="SecureAnswer" />
<xsd:element ref="DeliveryFaxNumber" />
</xsd:choice>
</xsd:sequence>
</xsd:complexType>
</xsd:element>
<xsd:element name="DeliveryType">
<xsd:complexType mixed="true">
<xsd:choice />
</xsd:complexType>
</xsd:element>
<xsd:element name="DeliveryContactName">
<xsd:complexType mixed="true">
<xsd:choice />
</xsd:complexType>
</xsd:element>
<xsd:element name="DeliveryEmailAddress">
<xsd:complexType mixed="true">
<xsd:choice />
</xsd:complexType>
</xsd:element>
<xsd:element name="SecureType">
<xsd:complexType />
</xsd:element>
<xsd:element name="SecureQuestion">
<xsd:complexType mixed="true">
<xsd:choice />
</xsd:complexType>
</xsd:element>
<xsd:element name="SecureAnswer">
<xsd:complexType mixed="true">
<xsd:choice />
</xsd:complexType>
</xsd:element>
<xsd:element name="DeliveryFormatType">
<xsd:complexType mixed="true">
<xsd:choice />
</xsd:complexType>
</xsd:element>
<xsd:element name="DeliveryCompanyId">
<xsd:complexType mixed="true">
<xsd:choice />
</xsd:complexType>
</xsd:element>
<xsd:element name="DeliveryUserId">
<xsd:complexType mixed="true">
<xsd:choice />
</xsd:complexType>
</xsd:element>
<xsd:element name="DeliveryFaxNumber">
<xsd:complexType mixed="true">
<xsd:choice />
</xsd:complexType>
</xsd:element>
<xsd:element name="ReceivingStreet01">
<xsd:complexType mixed="true">
<xsd:choice />
</xsd:complexType>
</xsd:element>
<xsd:element name="ReceivingStreet02">
<xsd:complexType />
</xsd:element>
<xsd:element name="ReceivingCity">
<xsd:complexType mixed="true">
<xsd:choice />
</xsd:complexType>
</xsd:element>
<xsd:element name="ReceivingState">
<xsd:complexType mixed="true">
<xsd:choice />
</xsd:complexType>
</xsd:element>
<xsd:element name="ReceivingZip">
<xsd:complexType mixed="true">
<xsd:choice />
</xsd:complexType>
</xsd:element>
<xsd:element name="ReceivingCountry">
<xsd:complexType mixed="true">
<xsd:choice />
</xsd:complexType>
</xsd:element>
</xsd:schema>
<h1>Example File</h1>
<?xml version="1.0" encoding="utf-8"?>
<Report>
<Biller>
<BillerName>DONATO TEST BILLER</BillerName>
<BillerIdNumber>999999999</BillerIdNumber>
<PartnerInfo>
<PartnerName>TEST TRADING PARTNER</PartnerName>
<PartnerVenderNumber>999999999</PartnerVenderNumber>
<PartnerStreet01 />
<PartnerStreet02 />
<PartnerCity />
<PartnerState />
<PartnerZip />
<PartnerCountry />
<PartnerActive />
<PartnerContactName />
<PartnerEmailAddress />
<PartnerContactPhone />
<PartnerFaxNumber />
<PartnerUpdateUser />
<PartnerUpdateDate />
<PartnerDocColor />
<PartnerDocDistribution />
<PartnerDocPrinting />
<PartnerDocTiming />
<Delivery>
<DeliveryType>EMAIL</DeliveryType>
<DeliveryContactName>Kiran</DeliveryContactName>
<DeliveryEmailAddress>[email protected]</DeliveryEmailAddress>
</Delivery>
<Delivery>
<DeliveryType>SECURE</DeliveryType>
<DeliveryContactName />
<DeliveryEmailAddress>[email protected]</DeliveryEmailAddress>
<SecureType />
<SecureQuestion>Pet Name</SecureQuestion>
<SecureAnswer>040698de9bf14ef87d8cbaf46b8ecddc</SecureAnswer>
<DeliveryFormatType />
</Delivery>
<Delivery>
<DeliveryType>CEO</DeliveryType>
<DeliveryContactName />
<DeliveryEmailAddress>[email protected]</DeliveryEmailAddress>
<DeliveryCompanyId>WFADM618</DeliveryCompanyId>
<DeliveryUserId>PAULSEN</DeliveryUserId>
<DeliveryFormatType />
</Delivery>
<Delivery>
<DeliveryType>FAX</DeliveryType>
<DeliveryContactName>Kiran</DeliveryContactName>
<DeliveryFaxNumber>4807244340</DeliveryFaxNumber>
<DeliveryFormatType>PDF</DeliveryFormatType>
</Delivery>
<Delivery>
<DeliveryType>DOC</DeliveryType>
<DeliveryContactName />
<ReceivingStreet01>2600 South Price Road</ReceivingStreet01>
<ReceivingStreet02 />
<ReceivingCity>Chandler</ReceivingCity>
<ReceivingState>AZ</ReceivingState>
<ReceivingZip>85248</ReceivingZip>
<ReceivingCountry>United States</ReceivingCountry>
</Delivery>
<Delivery>
<DeliveryType>DR</DeliveryType>
<DeliveryContactName />
<DeliveryEmailAddress>[email protected]</DeliveryEmailAddress>
<DeliveryCompanyId>WFADM618</DeliveryCompanyId>
<DeliveryUserId>PAULSEN</DeliveryUserId>
<DeliveryFormatType />
</Delivery>
</PartnerInfo>
</Biller>
</Report>

Try with a XMLTABLE function
For example to Extract BillerName and BillerID
with t as(select xmltype( '<?xml version="1.0" encoding="utf-8"?>
<Report>
<Biller>
<BillerName>DONATO TEST BILLER</BillerName>
<BillerIdNumber>999999999</BillerIdNumber>
<PartnerInfo>
<PartnerName>TEST TRADING PARTNER</PartnerName>
<PartnerVenderNumber>999999999</PartnerVenderNumber>
<PartnerStreet01 />
<PartnerStreet02 />
<PartnerCity />
<PartnerState />
<PartnerZip />
<PartnerCountry />
<PartnerActive />
<PartnerContactName />
<PartnerEmailAddress />
<PartnerContactPhone />
<PartnerFaxNumber />
<PartnerUpdateUser />
<PartnerUpdateDate />
<PartnerDocColor />
<PartnerDocDistribution />
<PartnerDocPrinting />
<PartnerDocTiming />
<Delivery>
<DeliveryType>EMAIL</DeliveryType>
<DeliveryContactName>Kiran</DeliveryContactName>
<DeliveryEmailAddress>[email protected]</DeliveryEmailAddress>
</Delivery>
<Delivery>
<DeliveryType>SECURE</DeliveryType>
<DeliveryContactName />
<DeliveryEmailAddress>[email protected]</DeliveryEmailAddress>
<SecureType />
<SecureQuestion>Pet Name</SecureQuestion>
<SecureAnswer>040698de9bf14ef87d8cbaf46b8ecddc</SecureAnswer>
<DeliveryFormatType />
</Delivery>
<Delivery>
<DeliveryType>CEO</DeliveryType>
<DeliveryContactName />
<DeliveryEmailAddress>[email protected]</DeliveryEmailAddress>
<DeliveryCompanyId>WFADM618</DeliveryCompanyId>
<DeliveryUserId>PAULSEN</DeliveryUserId>
<DeliveryFormatType />
</Delivery>
<Delivery>
<DeliveryType>FAX</DeliveryType>
<DeliveryContactName>Kiran</DeliveryContactName>
<DeliveryFaxNumber>4807244340</DeliveryFaxNumber>
<DeliveryFormatType>PDF</DeliveryFormatType>
</Delivery>
<Delivery>
<DeliveryType>DOC</DeliveryType>
<DeliveryContactName />
<ReceivingStreet01>2600 South Price Road</ReceivingStreet01>
<ReceivingStreet02 />
<ReceivingCity>Chandler</ReceivingCity>
<ReceivingState>AZ</ReceivingState>
<ReceivingZip>85248</ReceivingZip>
<ReceivingCountry>United States</ReceivingCountry>
</Delivery>
<Delivery>
<DeliveryType>DR</DeliveryType>
<DeliveryContactName />
<DeliveryEmailAddress>[email protected]</DeliveryEmailAddress>
<DeliveryCompanyId>WFADM618</DeliveryCompanyId>
<DeliveryUserId>PAULSEN</DeliveryUserId>
<DeliveryFormatType />
</Delivery>
</PartnerInfo>
</Biller>
</Report>')xml from dual)
select q.* from t,xmltable('/Report' passing t.xml columns
BillerName varchar2(20) PATH
                      '/Report//Biller/BillerName')q
        BILLERNAME     BILLERID
     DONATO TEST BILLER     999999999

How to merge/append two files in sequence using BPM

Hi All,
My senario is to append two files data into a new file on target system, only if the two files are available on source system. In case one file on the source system, no need to process file. Data in the new file should be in sequence means 1st file data then 2nd file data.
Please suggest me how can i achieve this functionality using BPM.
Thanks & Regards
Sreeni

For the first part (two files required) design as per Prateek's suggestion
Data in the new file should be in sequence means 1st file data then 2nd file data.
create a data structure which will be a combined structure of File1 and File2....target structure should have first reference for File1 and then for FIle2....than having two MTs (File1 and File2) at the source and the target MT at the receiver create your mapping......this will ensure that File1 data occures first and then File2 data.
Regards,
Abhishek.

How to restore a mysql dump file to database using java

hai friends,
i'm developing an application. in that i need to back up and restore the database. i'm using mysql.
in that i used a code to back up the db.. its working perfectly and the dump file is created perfectly..
but while trying to restore the dump file nothing is happening...
can anyone provide me a sample code to restore the dump to database using java code...
thanks in advance...

The first, biggest mistake you made in the code is that you didn't read standard output and error from the process, and/or you're ignoring exceptions. Because if you did, you would have read error messages that would have given you a clue what's wrong. (either that, or you ignored the clues, or didn't understand them and failed to tell us what the error messages are)
The second mistake is that you invoked exec with the call that takes a single string, when that string includes whitespace not used as delimiters.
The third mistake was that you used a terrible subject line for your post. Your problem is that you're having trouble with Runtime.exec. The fact that it's about mysql isn't relevent.
The fourth mistake is that you didn't mention Runtime.exec at all until pushed. You should provide these details. When you try to self-diagnose something that you don't understand, and then hide information, you're just wasting everybody's time, including your won.
The fifth mistake is that you're using poor spelling.
The sixth mistake is that you still haven't said why you're doing this in Java.

FILE TO IDOC USING BPM

Hi,
I am the fresher and new to XI. I want to know the step-by-step procedure for file to idoc scenario using bpm.I require it urgently.
Please help me out.
Thanks and have a nice day.

Sangeet - Check this blog :
<a href="/people/anish.abraham2/blog/2005/12/22/file-to-multiple-idocs-xslt-mapping to multiple IDocs using IP in ccBPM</a>
Hope this helps.
Cheers!
Shireesh M

Multiple files to single using bpm

Hi,
Scenarion : 6 files to 1 file using BPM
( 6 files are generated from the tool in a folder )
Files
abc1xyz_20101210.txt
abc2xyz_20101210.txt
abc3xyz_20101210.txt
abc4xyz_20101210.txt
abc5xyz_20101210.txt
abc6xyz_20101210.txt
Conditions
1) Sender File Adapter needs to pick the files when all the files are generated .
2) Should not pick the duplicate files
(eg : abc1xyz_20101210.txt
abc2xyz_20101210.txt
abc1xyz_20101211.txt
abc1xyz was repeated 2 times , ignore the file before file is picked.
ponints will be awarded
Thanks

Hi,
I prefer these kind of check can be easily done by the sender system or tool while generating those files itself..
that is during the generation of file if the file already exists then overwrite the content or delete the existing file and create new file...
other option can be..using OS scripts to validate the file name till 4 characters..read the file name and take first four chars and compare it with the all other files...
I cannot provide the exact code but check with some scripting guys..I think the above logic can be achievable..
HTH
Rajesh

How to read and upload microsoft word file into database using forms9i

Hi,
How to read and upload microsoft word file into oracle database using forms9i. I appretiate if anyone can send me example or atleast a sujjetion.
Thanks in advance
Mahesh Ragineni

The webutil package includes the ability up upload from the client to the database. See otn.oracle.com/products/forms and click on webutil for more details.
Regards
Grant Ronald
Forms Product Management

How do I save multiple files from database using oracle forms?

Forms [32 Bit] Version 10.1.2.3.0 (Production)
Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - 64bit Production
Hello,
I have a form containing a block of records with files set up in a tabular layout. Each row has a checkbox to indicate if that row is selected. What I want to do is allow the user to save each file from checked rows to a directory of their choice on their machine when a button is pressed. Is it possible to do this in one command at the same time using WEBUTIL_FILE to save all the selected files to the same directory, or would I need to loop through each row and call the save dialog each time?
Thanks.

I'm not sure I follow. The SAVE_DIALOG is building the path including the filename where the files will be saved. If I have 5 different files I want to save at the same time and only show the dialog once, I will only have a path for one of the files. How could I loop through the rest afterwards?

File to Database Using BPM

Similar Messages

Maybe you are looking for