File tranfer on through rs232
sir i want to tranfer a file to another pc through serial port plz hepl ,me out
maak
If you had done a search, you would have found the following:
this code example http://forums.ni.com/ni/board/message?board.id=170&view=by_date_ascending&message.id=109527#M109527
examples of file send & receive here http://forums.ni.com/ni/board/message?board.id=170&view=by_date_ascending&message.id=147796#M147796
this discussion http://forums.ni.com/ni/board/message?board.id=170&message.id=388871&query.id=53367#M388871
R
Similar Messages
-
Hi
I have an uploading problem to the server. The problem is when I try to upload a file it goes through the correct proceedure,
but does not change the remote file i.e.Index.htm, or three stages1.htm.
My Localroot folder is C:\Gods Plan Web\
The site map layout is C:\Gods Plan Web\Index.htm
The folder for the remote site is /public_html/
Should the local root folder mirror the remote site, i.e./public_html/
if this is so, what should I put into the
(a) Local Root Folder box?
(b) site map layout box?
The FTP is performing well other than changing the intended file.You should be uploading only the contents of your local root to the public_html folder (remote root).
The index.html you use as your site's home page needs to be in your site root. If you look at your Files window in DW, you should have something like the following...
Site - Whatever you named your site
index.html
images
pages
page1.html
page2.html
If you have any folder between Site - and the index.html page, like...
Site - Whatever you named your site
mywebsite
index.html
It will upload to the public_html while still in that folder, so to find your page online, you would need to type something like...
www.mydomain.com/mywebsite
public_html should NOT appear within your local files and if it existed there, would cause a redundancy if uploaded. You would need to type www.yourdomain.com/public_html to see the uploaded pages.
If you could post a screen shot of your expanded Files window while connected to the server (just connect and click the Expand button in Files, don't drill down into any of the directories), we may be able to see the issue. -
How to delete the files from server through OAF page
Hi All,
I have a requirement in which i am creating files on server through my CO code.
Now once the page is rendered, i want to delete the files from the server.
Just wondering how can we achieve this.
Kindly advice!
Thanks,
SachinHi Sachin
all the methods in the processRequest() are called during loading of the page.
all the methods in the processFormRequest() are called during any action events on the page.
So Use the method in processFormRequest() : write a method in
that on which action you want to delete the file.
regards
sridhar -
Capture Weigh Bridge Reading in ABAP Program through RS232 port
Dear SAPers,
I am in Cement Implementation Project and i have requirement to Connect Weigh Bridge to SAP ERP and capture the readings of that Weigh Bridge in ABAP program.
How can i capture those readings in ABAP program or save them in a Z table using RS232 port????
Best Regards,
Kholoud
Moderator message: please do not cross-post.
Edited by: Thomas Zloch on Mar 17, 2011 1:22 PMDear Vijay,
I'm having the same problem in my implementation, the client needs me to capture the readings from Weigh Bridge through RS232 port directly to ABAP program.
Could please tell me how did you solve this??
Thanks
Kholoud -
Problem with opening various text files in notepad through java
Hi friends,
I need to open any .txt file in notepad by running the code in Java.I could open the notepad through java but not a perticular file.I dont even want to hard code my program that only one perticular file will open through it.I want it generalised...if anyone could help me,it would be really nice...
thanks
Vishal.If your program opens notepad I'll delete it because I set UltraEdit as my default editor. So if you already must use system-specific code, how about grabbing a Windows manual to find out how to use the editor registered for these files? (Hint "start").
-
Final Cut Crashed and then corrupted the file. So Final cut wouldn't open up. I tried reloading the backup, trashing the prefs file, systematically going through the 3 previous versions and opening them by themselves one by one. I found Final Cut now loads but each of the backups and files in the previous 3 versions won't load. I've worked on the project for 3 weeks. Im suprised the backup files won't load either!?! I've only rendered 1 low res version. I am thinking I will have to rebuild the project in Final Cut 7. That is simply too risky to have all my back ups not load up!!
I'm a little confused by this?
Final cut now opens if launch older projects. But if I actually click on the project it crashes. Im not sure what you mean by events? I've moved them from the events folder.
but when I open up and of the projects the FInal Cut opens but then wont load the project even with no events in the FInal Cut Events folder. -
i have downloaded a fil on itunes through my phone and its been stuck on processing for half an hour what do i do
I suggest that you try to use Tiny Umbrella to kick your device out of recovery
The link to download Tiny Umbrella is shown below
http://thefirmwareumbrella.blogspot.com/
On the right hand side of the link you will see links to download Tiny Umbrella
After downloading and opening tiny umbrella, Click on exit out of recovery. Hope that works for you. If it doesnt work, try to write a detailed description of your problem and what is appearing on your screen etc and we will go from there. Good Luck -
Open CSV files in Excel through labview
Dear,
Am not famillar with *.csv files but I would like to know if it's possible to : open a CSV files in excel through labview.
I can't used ActiveX for my application. This application is on Labview 8.2
Regards
MassifHi Massif,
a .csv file is a spreadsheet file, so use the "open spreadsheet file" VI.
Cheers
Edit:
Dang, I'm always 30seconds behind you smercurrio!
Message Edited by lmtis on 04-22-2008 10:27 AM
Jim
LV 2013
Attachments:
csv.png 2 KB -
Where upload file is store through FileUpload UI at server ?
Hi,
Where upload file is store through FileUpload UI ? And How i access that server location ?
Regards,
Gurprit Bhatia
Edited by: GURPRIT BHATIA on Jun 5, 2008 2:49 PMHello Gurprit,
the files are actually loaded into the server's memory. Please refer to the following document:
[Uploading and Downloading Files in Web Dynpro Java|https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/b0e10426-77ca-2910-7eb5-d7d8982cb83f]
If you want to store the contents to a file you would have to write custom java code for that. For a clustered environment I would suggest to store the data in a database instead.
Kind regards
Matthias -
How to transfer input file into XI through sender file adapter
Hi
I am quite new to XI. Want to know how I can transfer a file into XI through sender file adapter. I dont have any input file, so I have to create a sample input file and I want to transfer that into XI. Can you please advise me of the steps involved in that. I have finished work in design and directory, now I want to push file the sample file into XI. The receiver adapter is an IDoc adapter. And also a very trivial question. How I can place my sample file into my source directory. ThanksHi Rajiv,
If your transport protocol is NFS then you need to put the file in the XI server. Because it becomes the Network File System. For that you can just type the ip address of the XI server in the "run" command or in the browser with "
" then in any of the Folders you can paste your file. But ensure that this is the path you give in your Sender File Adapter.
If your transport protocol is FTP then you need to see that ftp is running in your system. for that go to Control Panel>Add/Remove Programs>Add/Remove Components. In that check the IIS server and go to details and see that ftp is also checked. Now ftp is running in your system.
Now open your C:> drive >InetPub>ftproot . and create a folder here and paste your file. In the configuration of your File sender adapter just mention the name of the folder.
For your information, you can create a file with xml tags and namespace and message type manually (or) you can directly get it from the test tab of message mapping and generate source code. -
How to load flat file in BPS through Web-debugging
Hi,
We are working on flat file upload in BPS thru guide 'How to load flat file in BPS through Web'. Can some one guide on how to debug the function modules used while uploading the data.
We have set up the break point in the function modules and also in the BSP page. But when trying to debug while uploading, it is not going to the break point which was set.
Could you assist in setting up the break point.
Regards,
Sreenath
Message was edited by:
sreenath reddyHi,
I have put an external break-point.
I have hard coded it in the coding of the function module itself.
The code is perfectly working. But, when I want to check for the values of the variables in the F.M during runtime, the break-point is not triggering. Any ideas??
Regards, -
How to delete archive log files from ASM through Grid Control
Hi
Anybody suggest me how to delete archive log files from ASM through Grid Control.
ThanksIt is important to specify both, the oracle version and os version when posting, so confusions can be avoided.
In this particular case, since you are referring to asm and grid control you could be talking about either 10gR1, 10gR2 or 11gR1; but I strongly suggest you to avoid us to be guessing. In either case, you sould go to the maintenance tab of the target database and program a scheduled 'delete noprompt obsolete;' procedure. This will purge the information stored at the Flash recovery area, which I assume you have declared inside the ASM.
~ Madrid
http://hrivera99.blogspot.com/ -
How to upload 20MB of file into MySQL through Java
Hi Friends
Anyone let me know how to upload 20MB of file into MySQL through Java programming, is there is any feature available, or any changes to be made in MySQL
Thanks
SellaDon't know. Ask the MySQL folks. This is not a Java issue.
-
Can I load several files in parallel through one file infopackage?
Can I load several files in parallel through file datasource?
Hi Alex
I am sorry but am not able to understand your requirements completely.
If you are using BSP then how come infopackage comes in picture?
As through a BSP application you can load the data with the help of fundtion modules. In your case first load the data from file to internal table through function GUI_UPLOAD and then from internal table to ODS through function module RSDRI_ODSO_MODIFY.
Do not forget to assign points if this helps
Regards,
Monika Birdi -
My iphone has turned off and is now not working. I plugged it into my computer and it said it was in recovery mode and i had to restore it to fix it. Is there any way i can fix this problem without loosing all my files and photos through restoring it?
There's only one thing you can do: make an appointment with Apple genius at the Apple retail store for a out of warranty replacement.
Maybe you are looking for
-
Macbook wont start. it shows the globe then comes up with error message 2027F
Macbook pro starts with internet recovery, then it request to connect a wireless network, after connecting it displays 24:00 after some time it shows folder icon
-
Hi all. I'm trying to hide files (in Windows) using Java. The java.io.File class doesn't seem to have any facilities for changing file attributes in Windows. The only solutions that occur to me are to use WScript or to use a batch file with attrib. D
-
How do layer objects in Pages for iCloud?
I found the solution for layering in the full version of Pages but I could not find anything for the iCloud version. thanks!
-
Print PDF without flatten?
Dear All, I am trying to print a xdp file. And as far as I know, below is the step I require to do. 1) Convert XDP to PDF 2) Flatten PDF 3) Convert to PostScript 4) Send to print with service "sendToPrinter" But I hit a problem that dynamic form will
-
Mine is a G3 600Mhz, with its original 128 Mb memory. Lately it ran to a kernel panic and hang up. I used the Hardware Check CD, and it showed that the buit-in memory is errored. I don't have guaranty on my Ibook. So if I want to get it fix, how much