File- WebService(SOAP)- RFC

Hello experts!
I need to load the "request" of a webservice with information from an XML file. with the "response" call an RFC of R/3.
as I do that? I need to use BPM?
Best regards,
Anderson.

It will be a simple BPM with below steps:
Receive (MessageFromFILE) --> SyncSend (Req_and_Resp_to_WebService) --> AsyncSend (MessageToRFC)
If you want to include Transformation in the BPM then it will be either first ReceiveStep and/ or after SyncSend step.
Regards,
Abhishek.

Similar Messages

Need inputs for FILE-Webservice-File using BPM scenario

Hello All,
can any one tell me how to do the file-webservice(soap adapter)-file with out BPM.
If we cant do with out BPM then, please let me know after importing the WSDL file, how many Message interfaces i need to create what are they.
Thanks and Regards,
chinna

Hi Chinna,
Check this links for the receiver side SOAP configuration
http://help.sap.com/saphelp_nw04/helpdata/en/29/5bd93f130f9215e10000000a155106/frameset.htm
/people/shabarish.vijayakumar/blog/2006/03/23/rfc--xi--webservice--a-complete-walkthrough-part-1
/people/shabarish.vijayakumar/blog/2006/03/28/rfc--xi--webservice--a-complete-walkthrough-part-2
Sender side File adapter configuration is as usual
> please let me know after importing the WSDL file, how many Message interfaces i need to create what are they.
It is a synchronous scenario so you need to create the two message interfacess for the sender (one is for request message and another is for response message). For receiver you don't need to create any message interfaces, because the WSDL internally having the two messages (request and response).
Regards
Ramesh

SOAP- RFC- FTP Scenario

Hi experts,
Could you please show me the link which guides to create a scenario such as: request sent from SOAP client to XI server to get data from an ECC system, then the response will be sent to FTP server as file.
Thanks in advance

Hi,
RFC -> XI -> WebService - A Complete Walkthrough
RFC -> XI -> WebService - A Complete Walkthrough (Part 1)
RFC -> XI -> WebService - A Complete Walkthrough (Part 2)
SOAP-RFC-WEBSERVICE
SOAP-RFC-WEBSERVICE

File Soap Rfc

In my scnario file soap rfc i have used BPM.Even though the file is not picking up & its not calling webservices.Basically my requirement is i need to send a file which has to call webservice and the response has to get back to rfc.i am tring to work on this weblogs
/people/shabarish.vijayakumar/blog/2006/03/23/rfc--xi--webservice--a-complete-walkthrough-part-1
/people/shabarish.vijayakumar/blog/2006/03/28/rfc--xi--webservice--a-complete-walkthrough-part-2
I am able to get response for rfc to soap,but i want to work on a scenario file-soap-rfc and the response has to come to file.
Can any one please help me out.
Thanks
sriram

Thanks moorthy for your response
I have already configured receiver determination from file to bpm,even i bpm after sync step i have taken asyn
step..
In adapter Framework
Channelscn8_OB Sender Adapter v2727 for Party '', Service 'DEV_Integration_Server':
Configured at 2006-05-11 10:56:36 GMT-07:00
History:
- 2006-05-11 11:08:37 GMT-07:00: Polling interval started. Length: 60.000 s
- 2006-05-11 11:08:37 GMT-07:00: Processing finished successfully
- 2006-05-11 11:08:36 GMT-07:00: Processing started
- 2006-05-11 11:07:37 GMT-07:00: Polling interval started. Length: 60.000 s
- 2006-05-11 11:07:37 GMT-07:00: Processing finished successfully
But the file is not picked from directory
But i could not see any response from soap adapter,
Thanks
sriram

SOAP-RFC-WEBSERVICE

Hai All,
Please tell me how to do the following scenario in xi.
<b>SOAP-RFC</b>
1. sending soap request
2.Mapping soap request to rfc request
3.Mapping rfc response to a webservice request.
4. Mapping webservice response to soap response.
>>> Is it necessary to use bpm in this case... If yes, please tell me how to do this scenario in bpm.
Message was edited by:
SRI KRISHNA CHARAN

Thanks for your reply.....,
Yes i am able to get the wsdl file as external def in IR...
But my problem is...
lets take the scenario...
<b>SOAP(Sync)-RFC(Sync)-JDBC(Sync)</b>
1. Receiving soap request.
2. Mapping soap request to rfc request.
3. Mapping rfc response to jdbc request.
4. Mapping jdbc response to soap response.
5. Sending soap response.
Please tell me how can i desing and configure this scenario.
Thanks & Regards,
Sri Krishna Charan

File(PDF as attachment)-- XI-- WebService(SOAP with attachment)

Hi i have following Scenerio in my hand,
File>XI>WebService(SOAP)
Kindly help me in implementing the Following Scenerio;
I need to attach PDF to File Adapter as PayLoad or give it to File Adapter as Attachment which in turn send this data to XI and then XI wud generate WebService having this PDF as attachment.
Kindly Walk me thru all the steps during Configuration and design and do guide me how to test wether this scenerio works or not.
Also tell me abt the WebService i need to use to test the Scenerio.
Thanks.

Hi Jeet,
If you want your file adapter to read contents from a PDF file, check out the folloing blog,
<a href="/people/sap.user72/blog/2005/07/31/xi-read-data-from-pdf-file-in-sender-adapter">Sender File Adapter with PDF</a>
If you want your file adapter to generate its output into a PDF file, then check the following blog,
<a href="/people/sap.user72/blog/2005/07/27/xi-generate-pdf-file-out-of-file-adapter">Receiver File Adapter With PDF</a>
Sriram's blog on FILE to HTTP scenario might of be help to you too. It also deals with Syn / Async Bridge which can be ignored.
<a href="/people/sriram.vasudevan3/blog/2005/01/11/demonstrating-use-of-synchronous-asynchronous-bridge-to-integrate-synchronous-and-asynchronous-systems-using-ccbpm-in-sap-xi">File to HTTP</a>
Do let us know if you need any further help,
regards,
Bhavesh

R3 (rfc-sender) - XI - Webservice ( soap-receiver)

Hi,
I am getting below error whenever webservice(target system) is unavailable.
HTTP 404 Not Found
Then RFC got failed in R3, due to this error in XI
R3 (rfc-sender) <-> XI <-> Webservice ( soap-receiver) Synch
User will enter the request data in R3 and waiting for the response, but webservice is down(i.e not available)
Request is reached to XI box and XI is trying to send data when webservice is down( i,e not available), RFC is waiting for the response from XI box.
how we will handle this kind of situation,how should i give response back to RFC( because RFC sent the request and waiting for the response, XI could not send any response back as Webservce is down, Please advice me how should XI inform to the end user r R3 abt webservice.
I am getting this error to my mail box as i have configured ALERTS. i do not want to change existing RFC.
is there any chance to send response to R3 even webservice is down, please can any one suggest.
Thanks,
SIva
Edited by: Siva Grandhi on Jun 18, 2008 1:12 PM

Hi siva,
check this blog on HTTP errors.
/people/krishna.moorthyp/blog/2006/07/23/http-errors-in-xi
May be the URL you have given in SOAP at receiver adapter is wrong.Check that once.
Error: 404 Not Found
Description: The server has not found anything matching the Request-URI. No indication is given of whether the condition is temporary or permanent. The 410 (Gone) status code SHOULD be used if the server knows, through some internally configurable mechanism, that an old resource is permanently unavailable and has no forwarding address. This status code is commonly used when the server does not wish to reveal exactly why the request has been refused, or when no other response is applicable.
Possible Tips:- for HTTP_RESP_STATUS_CODE_NOT_OK 404
u2022 404 is an HTTP response code that indicates that the resource in question couldn't be found. Usually this is due to an incorrect URL, so it is better to cross check all URLs. Check pipeline URL in the SLD in the business system of the Integration Server For this go to SLD->Business System-><yourIntegrtaion Server>->Pipeline URL: It should be like this http://<host>:<port>/sap/xi/engine?type=entry Where host is the host name of the Integration Server and port is the HTTP(8xxx) port. To verify this in Integration Server you can do like this. Go to SXMB_ADM->Integration Engine Configuration->Choose Edit from Menu -> Change Global Configuration Data to switch to change mode. Then select System Landscape - Load Configuration. (This is not required always)
u2022 Check that the port really is the ICM HTTP Port and not the J2EE port i.e SMICM then menu GOTO --> SERVICES and check the port number for HTTP. It should be HTTP port
u2022 If the error is Page cannot be displayed, cannot find server in https configurations Check and correct the SSL configuration for the ABAP and the J2EE side of the system
u2022 If the error is because of integration server when using Proxy communications then check these. i.e SXMB_ADM->Integration Engine Configuration->Corresponding Integration Server enrty should be dest://<Http Integration server-Destination> Where < Http Integration server -Destination > is the RFC destination (SM59) of type HTTP connection (type H) to the Integration Server. In this case, host name, port, and path prefix are saved in the RFC destination.
Thanks,
Vijaya.

R3 (rfc-sender) - XI - Webservice ( soap-recever) Synch : error handlng

R3 (rfc-sender) <-> XI <-> Webservice ( soap-receiver) Synch
User will enter the request data in R3 and waiting for the response, but webservice is down(i.e not available)
Request is reached to XI box and XI is trying to send data when webservice is down( i,e not available), RFC is waiting for the response from XI box.
how we will handle this kind of situation,how should i give response back to RFC( because RFC sent the request and waiting for the response, XI could not send any response back as Webservce is down, Please advice me how should XI inform to the end user r R3 abt webservice down.
Pleae help me out on this.
Thanks,
Dhanush.

Hi,
Normally, the Web service should provide a fault message back to XI and the RFC should also have an exception defined that will trigger a fault message mapping and that way the application error is sent back to R3.
But if the web service does not provide u with a fault message then XI will trigger the System Error back to R3.
The functionality of checking the DB status and propagating meaningful errors to XI as fault messages should lie with the web service.
Thanks
Vikranth

Error in file-webservice- file (Error: java.lang.NullPointerException)

Hi everybody,
I have configured a file-webservice-file without BPM scenario...as explained by Bhavesh in the following thread:
File - RFC - File without a BPM - Possible from SP 19.
I have used a soap adapter (for webservice) instead of rfc .My input file sends the date as request message and gets the sales order details from the webservice and then creates a file at my sender side.
1 communication channel for sender file
1 for receiver soap
1 for receiver file
Error: java.lang.NullPointerException
What could be the reason for this error
thanks a lot
Ramya

Hi Tanaya,
I monitored the channels in the Runtime work bench and the error is in the sender ftp channel.The other 2 channel status is "not used" in RWB.
1 sender ftp channel
1 receiver soap channel
1 receiver ftp channel.
2009-12-16 15:02:00 Information Send binary file "b.xml" from ftp server "10.58.201.122:/", size 194 bytes with QoS EO
2009-12-16 15:02:00 Information MP: entering1
2009-12-16 15:02:00 Information MP: processing local module localejbs/AF_Modules/RequestResponseBean
2009-12-16 15:02:00 Information RRB: entering RequestResponseBean
2009-12-16 15:02:00 Information RRB: suspending the transaction
2009-12-16 15:02:00 Information RRB: passing through ...
2009-12-16 15:02:00 Information RRB: leaving RequestResponseBean
2009-12-16 15:02:00 Information MP: processing local module localejbs/CallSapAdapter
2009-12-16 15:02:00 Information The application tries to send an XI message synchronously using connection File_http://sap.com/xi/XI/System.
2009-12-16 15:02:00 Information Trying to put the message into the call queue.
2009-12-16 15:02:00 Information Message successfully put into the queue.
2009-12-16 15:02:00 Information The message was successfully retrieved from the call queue.
2009-12-16 15:02:00 Information The message status was set to DLNG.
2009-12-16 15:02:02 Error The message was successfully transmitted to endpoint com.sap.engine.interfaces.messaging.api.exception.MessagingException: Received HTTP response code 500 : Internal Server Error using connection File_http://sap.com/xi/XI/System.
2009-12-16 15:02:02 Error The message status was set to FAIL.
Now, the error is internal server error.What can I do about this?
thanks a lot
Ramya

File to SOAP adapter

Hey guys
can anyone provide me with step by step process for a Asynchronous File to Soap scenario,i m new to XI and would really appreciate if u explain the steps a bit in detail
thanx
ahmad

Hi,
Hope you have a Webservice ready to test the scenario.
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/336365d3-0401-0010-9884-a651295aeaa9
Go thru these blogs -
/people/shabarish.vijayakumar/blog/2006/03/23/rfc--xi--webservice--a-complete-walkthrough-part-1
/people/shabarish.vijayakumar/blog/2006/03/28/rfc--xi--webservice--a-complete-walkthrough-part-2
All these case, you need to remember, Sender is File in your case. Remaining configuration about SOAP will remain similar.
Regards
Moorthy

Error in 'WEBSERVICE TO RFC' SCENARIO

Hi experts,
i am facing a problem in 'WEB SERVICE-RFC' scenario,here we are using soap sender communication cheannel & rfc receiver communication channel.while processing the message from 'portal'(through web service in 'SXI_MONI' we are gettin 1 request & 2 response(error) message.
(in sxi_moni)
1st error message:
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:Category>Application</SAP:Category>
<SAP:Code area="RFC_ADAPTER">APPLICATION_ERROR</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="urn:sap-com:document:sap:rfc:functions">ZBAPI_QUOTATION.Exception</SAP:ApplicationFaultMessage>
<SAP:Stack />
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
[note: here we are using 'ZBAPI_QUOTATION' IN sap r/3)
2nd response:
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="MAPPING">NO_MAPPINGPROGRAM_FOUND</SAP:Code>
<SAP:P1>Object ID 08490A2EBE1A301E9D13373FF379B9BE Software Component 9776FD71CBAE11DF8942F5910A010C19</SAP:P1>
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Interface mapping Object ID 08490A2EBE1A301E9D13373FF379B9BE Software Component 9776FD71CBAE11DF8942F5910A010C19 does not exist in runtime cache</SAP:Stack>
<SAP:Retry>N</SAP:Retry>
</SAP:Error>
please help me to solve this issue.

For the mapping error >>> Please check whether you have created a response mapping and properly referenced it in your operation mapping
For the RFC exception error >> Please check if you have any new fields added in RFC , re Import the RFC definition in PI
refresh the cache SXI_Cache
Please check below similar threads
file rfc file
RFC_ADAPTER "APPLICATION_ERROR"
Re: Webservice to RFC testing
Hope this helps
Regards
Ninad

Sync File to SOAP scenario

Hey guys
i m doing a Sycn FIle to SOAP scenario(i guess i need BPM for that,right?)
lemme know if my configuration is correct
For sender FIle:
DT_sender,MT_sender,MI_sender,AI_sender(async)
For SOAP
DT_soap,MT_soap,MI_soap,AI_soap(sync)
For Receiver file
DT_receiver,MT_receiver,MI_receiver,AI_receiver.
and BPM would be
start>>Receive>>Sync send>>send>>stop
and ofcourse i need to import the WSDL for the webservice.
is this all,or i need to do some other designing too?
thanx
ahmad

Ahmad,
The weblog says you are sending a request from R3 using RFC. Then it gives back you the response from the webservice.
So first you have two scenarios:
Request:
Source: No datatype needed because you are importing the RFC.
Target: For this you need the datatype. Just create the datatype what he has mentioned.
Response:
Source : Just copy and paste the xsd. You import as an external definiton.
Target: Since your RFC is a synchrounous you will have the response for it. That is your target.
Then after that you do message mappings for request and response and then the interface mapping.
You dont need to have BPM for this interface. So dont worry about BPM for this interface.
Then you complete all the steps given in his weblog2. Then test it out.
---Satish

File to SOAP and SOAP to File (Synchronous)

Hi,
Can anybody advice me how to do the File to SOAP and SOAP to File with Synchronous call.
Thanks,
Naidu.

Hi,
Use this blog
RFC -> XI -> WebService - A Complete Walkthrough (Part 1)
and create an inbound synchronous interface for soap receiver structure. provide request and response structure in it.
Thanks!

File-PI-SOAP Interface error

Dear All,
We are trying a interface in which we wanted to do Post Goods Issue in SAP from a file. We have exposed our Z-RFC which will do PGI as webservice and has imported its WSDL in PI.
Then, we have created a File-PI-SOAP interface. Now, when we are testing the interface we are getting success message in SXMB_MONI but in RWB, message for picking the file is success and when I am opening the message details its showing
" 500 Internal Server Error" ""Application error occurred during the request procession."
Details: "The WebApplicationException log ID is [001A64D0A1FC005F0000004600002E4800CEA8DA2043BF9A]."
Same error is showing for the receiver message but at payload I am able to see the correct values.
Kindly let us know, if any configurations are to be required to remove thsi error.
Regards,
NJ

Hi,
>500 Internal Server Error
does mean the server does not understand the request. I your case: You want to make use of a service which assumedly no exist. May be you have to release or activate it or to do something in SOAMANAGER. Please check your service first with SOAP UI.
Regards,
Udo

SICF - HTTP 500 Error when testing SOAP RFC Service for XML load into BW

I am trying to load a XML file into BW w/o XI. So there is no source system as such. I followed the 'How to guide on loading XML to BW. I am on BW 3.5. I went to
transaction SICF>default_host/sap/bc/soap/rfc
I did a RMC and selected Test Service. A browser window open like it is trying to connect to the BW system, but I see the HTTP 500 - Internal Server Error.
What is causing this? All services are appearing as Active (grayed out). I am basically trying to put the XML file into the BW delta queue. The BW data source have been created and ther is a green entry in RSA7.
Thanks in advance.

Dinesh,
My question was more reagrding one of the steps that is not working i.e. testing for webservice. I am aware of the datasource etc.
Hence, still looking for help on what could be the causes of my error as described in the original message above.
Thanks!

File- WebService(SOAP)- RFC

Similar Messages

Maybe you are looking for