SOAP- RFC- FTP Scenario

Hi experts,
Could you please show me the link which guides to create a scenario such as: request sent from SOAP client to XI server to get data from an ECC system, then the response will be sent to FTP server as file.
Thanks in advance

Hi,
RFC -> XI -> WebService - A Complete Walkthrough
RFC -> XI -> WebService - A Complete Walkthrough (Part 1)
RFC -> XI -> WebService - A Complete Walkthrough (Part 2)
SOAP-RFC-WEBSERVICE
SOAP-RFC-WEBSERVICE

Similar Messages

SOAP to RFC - Sync Scenario. How to find where the response is going to?

Hello All
I have a SOAP to RFC sync scenario.
In SXMB_MONI, i see that both the initial message and the response message are successfully processed.
But, the SOAP sender is not receiving the response message.
How can i trouble shoot this scenario? How can i findout what is going wrong?
Most importantly, How can i find out the web address of the SOAP sender? I do not see it anywhere.
Thanks

Hi Chandra,
Please check this blog.
/people/shabarish.vijayakumar/blog/2008/01/08/troubleshooting--rfc-and-soap-scenarios-updated-on-20042009
You can by pass your message through a TCPIP gateway , this will help you to see the message contnet and the SOAP header information.
TCPIPGW application is availabel in one of the SAP notes for Monitoring SOAP adapter. and 2 SAP SDN PI blogs are also there on how to use this application...
Regards
Sunil.

ERROR During call of SOAP with a SOAP- RFC- SOAP Synchronous scenario

Hello Experts,
I've recently created a SOAP->RFC->SOAP synchronous scenario but every time I'm invoking the SOAP via XMLSpy then i will hang and send a timeout error. Also a log in XI was generated as shown below.
I hope you could help me on this one.
Runtime Errors         DBIF_RSQL_SQL_ERROR
Exception              CX_SY_OPEN_SQL_DB
Date and Time          28.09.2010 09:31:23
Short text
     SQL error in the database when accessing a table.
What happened?
     The database system detected a deadlock and avoided it by rolling back
     your transaction.
What can you do?
     If possible (and necessary), repeat the last database transaction in the
      hope that locking the object will not result in another deadlock.
     Note which actions and input led to the error.
     For further help in handling the problem, contact your SAP administrator
     You can use the ABAP dump analysis transaction ST22 to view and manage
     termination messages, in particular for long term reference.
     Note which actions and input led to the error.
     For further help in handling the problem, contact your SAP administrator
     You can use the ABAP dump analysis transaction ST22 to view and manage
     termination messages, in particular for long term reference.
Error analysis
     An exception occurred that is explained in detail below.
     The exception, which is assigned to class 'CX_SY_OPEN_SQL_DB', was not caught
      in
     procedure "DELETE_LUW_PACKET" "(FORM)", nor was it propagated by a RAISING
      clause.
     Since the caller of the procedure could not have anticipated that the
     exception would occur, the current program is terminated.
     The reason for the exception is:
     The database system recognized that your last operation on the database
     would have led to a deadlock.
     Therefore, your transaction was rolled back
     to avoid this.
     ORACLE always terminates any transaction that would result in deadlock.
     The other transactions involved in this potential deadlock
     are not affected by the termination.
Regards,
Alfred

Normally such an error comes when the DB of SAP PI is full.
Contact your BASIS or ADMIN team and ask them to free the DB space.
Regards,
Abhishek.

Payload not visible in cc monitoring for SOAP-RFC synchronous AAE scenario

Hello consultants,
I have a synchronous SOAP-RFC scenario over the AAE (Java only). When I test the service in WSNAVIGATOR the response message contains an error that results in the error message:
"<s:SystemError xmlns:s="http://sap.com/xi/WebService/xi2.0">
          <context>XIAdapter</context>
          <code>ADAPTER.JAVA_EXCEPTION</code>
          <text><![CDATA[
java.io.IOException: Parsing Error: org.xml.sax.SAXParseException: The processing instruction target matching "[xX][mM][lL]" is not allowed." the same errror is present in communication channel monitoring for the SOAP adapter.
The status in message monitoring however is succesful.
Is it possible to check the payload for the response message of the RFC call. In CC monitoring I cannot access the payload, it is not there. It does not have to be in cc monitoring, anywhere would be fine.
Since this is an AAE scenario there are no messages in SXMB_MONI.
All tips are appreciated.
Peter Jonker

Hello!
Please set the "messaging.syncMessageRemover.removeBody" parameter to "false", on the SAP XI AF Messaging Service. Use the help page below for more information.
Properties Related to the Messaging System:
http://help.sap.com/saphelp_nw04s/helpdata/EN/59/25ee41c334c717e10000000a155106/frameset.htm
Best regards,
Lucas Santos

Which is better XI 3.0 or PI 7.1 for SOAP- RFC scenario.

Hi All,
I have to Create SOAP to RFC Sync Scenario.
I know PI 7.1 is advance. So there must be a edge over XI3.0.
Is is better to use PI7.0 insted of Xi 3.0 for this?
then Why?

Hi,
this blog might be interesting:
http://www.sdn.sap.com/irj/scn/index;jsessionid=%28J2EE3417500%29ID0033175050DB10487845846410196322End?rid=/library/uuid/504da602-3bac-2c10-f5a3-bcfa6587d47b
For example it says:
> Further connectivity options are provided on the AAE, such as XI message protocol using the SOAP adapter: For example, this > permits fast access to ABAP backend systems based on the proxy technology.
Regards
Patrick

File Soap Rfc

In my scnario file soap rfc i have used BPM.Even though the file is not picking up & its not calling webservices.Basically my requirement is i need to send a file which has to call webservice and the response has to get back to rfc.i am tring to work on this weblogs
/people/shabarish.vijayakumar/blog/2006/03/23/rfc--xi--webservice--a-complete-walkthrough-part-1
/people/shabarish.vijayakumar/blog/2006/03/28/rfc--xi--webservice--a-complete-walkthrough-part-2
I am able to get response for rfc to soap,but i want to work on a scenario file-soap-rfc and the response has to come to file.
Can any one please help me out.
Thanks
sriram

Thanks moorthy for your response
I have already configured receiver determination from file to bpm,even i bpm after sync step i have taken asyn
step..
In adapter Framework
Channelscn8_OB Sender Adapter v2727 for Party '', Service 'DEV_Integration_Server':
Configured at 2006-05-11 10:56:36 GMT-07:00
History:
- 2006-05-11 11:08:37 GMT-07:00: Polling interval started. Length: 60.000 s
- 2006-05-11 11:08:37 GMT-07:00: Processing finished successfully
- 2006-05-11 11:08:36 GMT-07:00: Processing started
- 2006-05-11 11:07:37 GMT-07:00: Polling interval started. Length: 60.000 s
- 2006-05-11 11:07:37 GMT-07:00: Processing finished successfully
But the file is not picked from directory
But i could not see any response from soap adapter,
Thanks
sriram

File to Web service (SOAP) to File scenario with out BPM in PI 7.1

Hi All,
I have scenario File to Web service (SOAP) to File scenario with out BPM.i am getting the below error:
1) Error MP: unexpected exception caught com.sap.aii.af.service.cpa.impl.exception.CPAObjectKeyException: Value of key must not be null: ObjectId
2) Error ROB: error during processing: com.sap.aii.af.lib.mp.processor.ModuleProcessorException: Processing Error
PI server is 7.1 with SP:8
I have configured the scenario like this
1) 2 File channels - Sender & Receiver ,1 RFC channel - Receiver. We need to note that, the additional Module parameters need to be added only for sender File channel
2) Created Sender Agreement
3)Created Receiver Determination
4)Created Interface Determination
5)Created Receiver Agreement
Regards,
Ramesh

Hi,
Thanks for your reply!!
My Scenario is File to SOAP to File.
Configred modules in Sender channal below:
Prcessing sequence:
Number       Module Name                                        Module Key
1..........       AF_Modules/RequestResponseBean.......1
2..........       CallSapAdapter..........................................2
3..........       AF_Modules/ResponseOnewayBean.......3
Module Configuration:
Module Key                                       Parameter Name                                       ParameterValue
1                                                        passThrough                                            true
3                                                        receiverChannel                                       receiverChannel name
3                                                        receiverService                                        receiverService name
please tell any more confiration requered.
Regards,
Ramesh

Error in SOAP to file scenario

Hey guys
i m doing a SOAP to File scenario and getting the following error.
<SAP:Stack>"COMMUNICATION FAILURE" during JCo call. Error opening an RFC connection.</SAP:Stack>
any idea where should i look ?
thanx
ahmad

Hey
i m still getting a red flag in MONI,the error is
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="MAPPING">JCO_COMMUNICATION_FAILURE</SAP:Code>
<SAP:P1>Error opening an RFC connection.</SAP:P1>
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>"COMMUNICATION FAILURE" during JCo call. Error opening an RFC connection.</SAP:Stack>
<SAP:Retry>A</SAP:Retry>
</SAP:Error>
i checked my mapping by copyin payload from MONI,its working fine.
thanx
ahmad

JCO problem in SOAP to file scenario

Hey guys
i m doin a SOAP to file scenario and getting a JCO error in moni,the status of my queue in SMQ2 is SYSFAIL,when i check the TCP/IP connection in SM59 i find error in two places
AI_DIRECTORY_JCOSERVER and AI_RUNTIME_JCOSERVER .when i test connection for both of them i get the followin error "Error opening and RFC connection".
is this error dues to some server problem of something wrong in my scenario.?
the SOAP adapter in RWB is green.
i tried to unlock and delete the queue in SMQ2 but when i execute my scenario again,it gets SYSFAIL error.
thanx
ahmad

Hi,
If you restart the J2ee engine, it will work.
But The error may because of many reasons
-Might be because of lots of messages are to be processed simultaneously.
-Increasing the number of processes in VisualAdmin (VisualAdmin>JCO RFC Provider>AI_RUNTIME_<SID>) and see if that helps.
-This SAP Note may help u -709140.
Hope this helps,
Regards,
Moorthy

Soap to File Scenario with BPM

Hi Guys
I have create my Soap to File Scenario using BPM to split the file on "Transformation step" into 7 files and it must save these files to my FTP Server, when testing on sxmb_moni I don't get any errors but when checking on the FTP server no files are created, and I understand that it should be showing all seven processing on the sxmb_moni, but that is not happening.
I have used the ForEach mode on my Block.
What could I be doing wrong.
Thanks!!
Yonela

go to runtime work bench to see communication channel, especailly the receiver channel.
To see what happened on it

File to RFC synchronous scenario stopped Picking the files

Hi Experts,
We have a File to RFC synchronous scenario. Till yesterday night it is working fine.
But suddenly it is stooped working.In moni, i can see the failed messages with the Mapping error " Can not create target element, values missing in the queue context "
No Payload in moni / communication channel monitoring / Message monitoring. I've noticed that, wrong files placed in the To-be- processed files and the adapter picked those files and failed in mapping.
I tried by stop and start the communication channel / did some dummy changes in the communication channel and activated. cleared the cache.
But still the communication channel is not working.when i stop and start the communication channel it will try to process the wrong files and failed.
Give me your valuable inputs to resolve this issue.
Regards
Bhargava krishna

Hi Bharghav,
Please go through the below,
Symptom
FTP Adapter is being used in the business scenario for message processing.
During file processing it is noticed, that the FTP sender channel stops
polling. There is no error in the channel monitor or the trace/log files
and the polling jobs are correctly displayed in the AFW scheduler table.
The issue is observed after a network connection issue with the FTP server.
In order to remove the hanging locks from the FTP Adapter, the parameter
'ftp.timeout' setting is required to be set, which releases the lock once
the timeout value is expired. But in the above situation, the value for the
'ftp.timeout' is not taken properly while establishing the data connection
by File Adapter.
Other terms
FTP Adapter, sender, FTP, adapter, timeout, stalled, network, hang, polling
Reason and Prerequisites
Program error
Solution
The hanging situation has now been improved by code changes. Please see
section "SP Patch Level" of this note for a list of updated software
components.
To get this correction available in your Support Package you need to apply
the patch matching to your Support Package version as per the instructions
in the NetWeaver Support Package Stack guide which can be found on the SAP
Service Marketplace as described in SAP Note 952402.
Thanks & Regards
Uday.S

Web Service to FTP scenario - MAPPING.NO_MAPPINGPROGRAM_FOUND error

Hi,
I am developing a Web Service to FTP scenario in XI, I am testing the interface by writing a client program using AXIS. when I invoke the service from the client, it is able to hit the service and writing the file to FTP with the data However the client is program receiving a fault with the below error.
"SystemError:<context/><code>MAPPING.NO_MAPPINGPROGRAM_FOUND</code><text>Unable to determine name of mapping program</text>"
I set quality of service to 'Exactly Once' on the SOAP sender adapter.
Would appreciate any help on this.

Hi,
What is the URL to which you are posting the SOAP message?
Is it?
http://<host>:<j2ee-port>/XISOAPAdapter/MessageServlet? channel=<party>:<service>:<channel>
If yes, then like mentioned the QOS is picked from the Sender SOAP adapter.
But, if the URL is ,
http://<server>:<ABAP-port>/sap/xi/engine?type=entry&version=3.0&Sender.Service=<YourService>&Interface=<YourNamespace>%5E<YourInterface>
Then you need to give the QOS as <b>,&QualityOfService=ExactlyOnce</b> appended to the above URL.
More, /people/stefan.grube/blog/2006/09/21/using-the-soap-inbound-channel-of-the-integration-engine
Regards
Bhavesh

SOAP to IDoc scenario without BPM

Hi,
I have 2 scenario's
1) IDoc-SOAP - -response -- IDoc scenario -- (have found some links to do it without BPM)
2) SOAP -- RFC request -- RFC response -- e-mail (no links found)
how can i achive both these scenario's without BPM. Currently i have these 2 scenarios in our 7.1 version with BPM. but our requirement is to migrate this scenario into 7.4 without BPM(No PO).
please help us to achive this scenario without BPM.
Your help is highly appreciated.
thanks,
Praveen

Hi Kiran,
Could you please let us know the exact requirement. How do you want to send the response back to IDOC?
ASync - Sync Bridge with IDOC sender is not possible in PI 7.0.
If It is something like IDOC --> SOAP --> IDOC , And If the SOAP request is small then you can use SOAP Lookup in IDOC to IDOC Scenario.
In The mapping You can do a lookup and get the response from SOAP(Webservice) and map that to your Target IDOC.
This is one possible way for you without BPM in PI7.0.
Please let me know if you need more details about this.
Thanks
Jyothi A

SOAP service /sap/bc/soap/rfc/sap does not exist

Hi!
I implement ABAP-Proxy to SOAP scenario.
For the receiver communication channel (SOAP Adapter) I need to put target-URL
http://<server>:8000/sap/bc/soap/rfc/sap/BAPI_MATERIAL_EXISTENCECHECK?sap-client=200.
Unfortunately the URL cannot be displayed in brwoser.
I also could not detect the appropriate SICF service sap/bc/soap/rfc/sap under tcode SICF.
Can some one help me to solve this problem?
Thank you very much!
regards
Holger

Hi!
What is the difference between the both URL's?
http://<server>:8000/sap/bc/soap/wsdl11?services=BAPI_NAME&sap-client=200
http://<server>:8000/sap/bc/soap/rfc/sap/BAPI_MATERIAL_EXISTENCECHECK?sap-client=200.
Thank you!
regards
Holger

Problem with SOAP to JDBC scenario. Please help!

Hi Experts,
I have configured a simple SOAP to JDBC scenario where the input data from webservice call is sent to JDBC for inserting into MSSQL database.
The problem is that even though I have setup the QOS in SOAP channel as EO but still in SXMB_MONI I can see the message getting processed as Synchrous but getting interface mapping not found error. But the data is getting inserted in the database.
Why is this not getting processed asynchrously? Please advice me if I am missing anything?
Thanks
Gopal

Hello Gopal,
Hope these lonks are useful to you:
SOAP to JDBC : EXCEPTION_DURING_EXECUTE
Re: need help on SOAP-JDBC-RFC Scenario
SOAP to JDBC/RFC - RFC/JDBC to SOAP XI Scenario
Thanks,
Satya Kumar

SOAP- RFC- FTP Scenario

Similar Messages

Maybe you are looking for