Filename and InboundHeader

The File, FTP, and Database Adapter Guide section 2.1.1.8 talks about "No Payload Support". It indicates that you must place UseHeaders="true" in the InboundHeader wsdl document to use this feature. Once you have done that, how do you see the filename? I want to pass that as a value through a transform in a routing rule. Is this doable? If so, how do I access the filename in the transform?

Solution: Getting filename in FTP Adapter in ESB

Similar Messages

Logical filename and logical path in lsmw

Hi all,
I am doing a lsmw for purchasing info record . i created a logicalpath and assigned a physical path to that . i created a logical filename and assigned the logical path .but when i assign that to the lsmw it is throwing error as 'LOGICAL PATH DOES NOT POINT TO PHYSICAL DIRECTORY' .
can anybody provide a solution for that .
Thanks & regards
Magesh anandan

hi ,
goto the tcode file then u find the relation between the logical and physical paths ...and their assignment..
hope it will helps u..
regards,
venkat.

Insert filename and path?

Hi,
Can you insert the filename and path into a footer in a ID document same as you would with a Microsoft Word document?
Thank you,
Barb

With CS3 use a text variable.
Bob

Trying to add filename and path in footer of Word doc and it only lets me "Convert to PDF"?

I am running MS Office 03 and just installed Acrobat 9.0 Pro. When I try to insert the Filename and Path from the insert option of the footer properties, it only gives me the option to "Convert to PDF". I don't know why it's doing this, but it started after the install of Acrobat 9.0. What should I do?

To get the path ... event.target.path;
To get the file name .... event.target.documentFileName;

Filename and path sizes and characters

I am failing to load 4000+ tracks to my Ipod from my XP machine using Itunes 7.50.0.20. This is an Ipod Clickwheel 20GB. I want to load 17.86GB in the now empty Ipod. However it gets so far then stops saying there is not enough space.
I wonder if am I getting the wrong message?
Some of my tracks have very long filenames/paths e.g 124 charactere filenames and 213 character paths. I also have some filenames with " (double quote) in.
Could this be the reason?
If so what characters must I avoid and what size should the filename and paths be limited to?

Filenames and paths are irrelevant. They are renamed on the iPod anyway.
20 GB is not really 20. It is a rounded number all HD manufacturers use. Plus you lose some space due to formatting and the iPod software. There is also meta data for the songs which takes some space.

[b]HOW TO:[/b] Copy and Paste THE Filename AND its PATH from Finder

HOW TO DO THIS: Copy and Paste THE selected Filename AND its entire PATH from Finder to another application as in document footer reference, or document database which has a path field to aid in locating the file later.
Finder, Spotlight and File Info (can be used to display Path) or using Command F, command I, etc. but user is not allowed to copy the path to clipboard.
This is rudimentary, yet the word Path, is unknown to Mac Help.
Message was edited by: jbov

AJ,
Isn't it amazing....There is no Command Key for this action? Apple Care was confounded too. And thanx, it'll be a help....
Jim
its tedious, but this should work:
open a terminal window.
Drag and drop the icon for the file in the terminal
window.
This will put the full path including the filename on
the command line.
Copy the path from the command line, and paste
(wherever).
Close the terminal window.

Get filename and full path from Forms on local directory in MS Windows

I am writing a Form, when clicking a Push Button, I can click on sub-directory and select a filename, and the filename and the full path are then passed to a Text Item.
Does any one know how this could be done?

which version of forms?
webforms you can use the webutils bean thing.
client server forms there is/was the hierarchical tree object

Automator: Create folder from suffix of filename and put file names with same suffix into folder

I've been using a script to use automator to create a folder from the filename and put that file into it the folder just created.
I have a bunch of files that have similar names to them, but I don't want every file to be put into its own folder, instead I want all files with the same suffix (001) to go into the same folder. I would also like the folder name to just be named the same as the suffix (001) instead of the full file name.
For example all of these files names that end with the same integer (001) should be dumped into the same folder named "001":
Boston_ProRes422_1920x1080_24p_Audio_001
Boston_ProRes422_3840x2160_24p_Audio_001
Boston_ProRes422_3840x2160_24p_RAW_Audio_001
Boston_ProRes422_1920x1080_24p_Audio_002
Boston_ProRes422_1920x1080_24p_Audio_005
Boston_ProRes422_1920x1080_24p_Audio_010
Any help at all would be incredible!!
Thanks!
Here's the script I'm using right now:
on run {input, parameters} -- create folders from file names and move
set output to {} -- this will be a list of the moved files
repeat with anItem in the input -- step through each item in the input
set {theContainer, theName, theExtension} to (getTheNames from anItem)
try
set destination to (makeNewFolder for theName at theContainer)
tell application "Finder"
move anItem to destination
set the end of the output to the result as alias -- success
end tell
on error errorMessage -- duplicate name, permissions, etc
log errorMessage
# handle errors if desired - just skip for now
end try
end repeat
return the output -- pass on the results to following actions
end run
to getTheNames from someItem -- get a container, name, and extension from a file item
tell application "System Events" to tell disk item (someItem as text)
set theContainer to the path of the container
set {theName, theExtension} to {name, name extension}
end tell
if theExtension is not "" then
set theName to text 1 thru -((count theExtension) + 2) of theName -- just the name part
set theExtension to "." & theExtension
end if
return {theContainer, theName, theExtension}
end getTheNames
to makeNewFolder for theChild at theParent -- make a new child folder at the parent location if it doesn't already exist
set theParent to theParent as text
if theParent begins with "/" then set theParent to theParent as POSIX file as text
try
return (theParent & theChild) as alias
on error errorMessage -- no folder
log errorMessage
tell application "Finder" to make new folder at theParent with properties {name:theChild}
return the result as alias
end try
end makeNewFolder

Thanks Neil for the response! That script didn't work, but I did get it to work with my old script by changing "set TheName to" numbers different. Here's my final script which creates folders named "001", "002", and so forth and dumps in the files that end in that same suffix in the matching folder.
on run {input, parameters} -- create folders from file names and move
set output to {} -- this will be a list of the moved files
repeat with anItem in the input -- step through each item in the input
set {theContainer, theName, theExtension} to (getTheNames from anItem)
try
set destination to (makeNewFolder for theName at theContainer)
tell application "Finder"
move anItem to destination
set the end of the output to the result as alias -- success
end tell
on error errorMessage -- duplicate name, permissions, etc
log errorMessage
# handle errors if desired - just skip for now
end try
end repeat
return the output -- pass on the results to following actions
end run
to getTheNames from someItem -- get a container, name, and extension from a file item
tell application "System Events" to tell disk item (someItem as text)
set theContainer to the path of the container
set {theName, theExtension} to {name, name extension}
end tell
if theExtension is not "" then
set theName to text -5 thru -((count theExtension) + 4) of theName -- just the name part
set theExtension to "." & theExtension
end if
return {theContainer, theName, theExtension}
end getTheNames
to makeNewFolder for theChild at theParent -- make a new child folder at the parent location if it doesn't already exist
set theParent to theParent as text
if theParent begins with "/" then set theParent to theParent as POSIX file as text
try
return (theParent & theChild) as alias
on error errorMessage -- no folder
log errorMessage
tell application "Finder" to make new folder at theParent with properties {name:theChild}
return the result as alias
end try
end makeNewFolder

Read character 3+4 from filename and move to other position

Hello,
I need a javascript to read my filename (I have the one for the full filename) and especially the 3rd and 4th position of the filename.
The characters on position 3 and 4 must be moved to the position just before the extension.
Example:
4PEN12345.pdf (old name) should be 4P12345_EN.pdf
Now I have the following script to extract all pages in an existing pdf file to separate pages with all the same suffix before the extension
/* Extract Pages to Folder */
    var re = /.*\/|\.pdf$/ig;
    var filename = this.path.replace(re,"");
        for ( var i = 0; i < this.numPages; i++ )
        this.extractPages
            nStart: i,
            nEnd: i,
            cPath : filename + "_page_" + (i+1) + "_EN.pdf"
Can anybody help me to set me on the right direction?

Now I have the file 4PBG12345-1.pdf (7 pages included in the pdf).
Your script as I filled in:
/* Extract Pages to Folder */
    var re = /.*\/|\.pdf$/ig;
    var filePath = this.path.replace(this.documentFileName, "");
    var oldFileName = this.documentFileName;
    var suffix = oldFileName.substring(2,4);
    var newFileName = oldFileName.substring(0,2) + oldFileName.substring(4).replace(".pdf", "_"+suffix+".pdf");
    var newFilePath = filePath + newFileName;
        for ( var i = 0; i < this.numPages; i++ )
        this.extractPages
            nStart: i,
            nEnd: i,
            cPath : newFilePath
Result:
1 file ==> 4P12345-1_BG.pdf (7 pages included in the pdf)
Of course, because the syntax for extracting and adding automatic pages is not filled in. So, that was my question, how must I nest to add the right:
Filepath+oldfilenamesubstring(0,2)+oldfilenamesubstring(4)+_page_i++_+suffix+.pdf in the extract section
So, my example must result in 7 pdf's:
4P12345-1_page_1_BG.pdf (with content of page 1)
4P12345-1_page_2_BG.pdf (with content of page 2)
4P12345-1_page_3_BG.pdf (with content of page 3)
4P12345-1_page_4_BG.pdf (with content of page 4)
4P12345-1_page_5_BG.pdf (with content of page 5)
4P12345-1_page_6_BG.pdf (with content of page 6)
4P12345-1_page_7_BG.pdf (with content of page 7)

Inserting filename and page numbers into multiple PDF files?

Have since seen this thread, BUT still interested in the syntax of the code
to insert filename and page # into multiple files:
http://forums.adobe.com/thread/951925?tstart=0
Good Evening (GMT!)
I have approx 100 PDFs with one or two pages in each, they are English translations
of Russian language test certificates and the formatting/feel of the originals is lost in
the translations. The only real link between the two sources is the "_RUS" and "_ENG"
filename suffixes and the common leading filenames otherwise. Thus I need to maintain
a record of the filename in any page I print off, should there be a need to refer back to
the original if the translation is open to artistic licence.
I have a script (below) that happily adds a page x/y and filename into the active file,
what I would like is to be able to do this insertion into multiple files as defined by a
portfolio or a selection via a select files dialogue box
I am quite out of my depth now as my past skirmishes with JavaScript have set
cookies and tweaked a few other browser doodads in webauthoring
Any help most appreciated on this one...
Kind Regards
Dr B
Southampton
UK
NB the filename inserted may be corrupted as a result of my last tweakings
will sort that one out ASAP....
================================
// SetRemoveFooter
// Modified as marked
// Menu item generation
app.addSubMenu({ cName: "Footer",cUser: "Set/Remove Complex Footer", cParent: "File", nPos: 20 });
app.addMenuItem({ cName: "Set Filename", cParent: "Footer", cExec: "SetFooter(1)"});
app.addMenuItem({ cName: " -> Set Date .... centered", cParent: "Footer", cExec: "SetFooter(2)"});
app.addMenuItem({ cName: " -> Set Date .... right", cParent: "Footer", cExec: "SetFooter(3)"});
//add page x of y
app.addMenuItem({ cName: "Set Page ", cParent: "Footer", cExec: "SetFooter(4)"});
app.addMenuItem({ cName: "Set Both", cParent: "Footer", cExec: "SetFooter(5)"});
app.addMenuItem({ cName: "-------------------------------", cParent: "Footer",cExec: "{}"});
app.addMenuItem({ cName: "Remove Both", cParent: "Footer", cExec: "RemoveFooter(5)"});
app.addMenuItem({ cName: "Remove Date Time (Filename)", cParent: "Footer", cExec: "RemoveFooter(1)"});
app.addMenuItem({ cName: "Remove Page", cParent: "Footer", cExec: "RemoveFooter(4)"});
//=====================================================================================
//Set/remove Footer
function SetFooter(ARG)
var re = /.*\/|\.pdf$/ig;
var FileNM = + this.path.replace(re,"")+".pdf";
var Path = this.path;
var AcDate = new Date();
var AcDateFormat = "dd/mm/yyyy"
var Box2Width = 100
for (var p = 0; p < this.numPages; p++)
var aRect = this.getPageBox("Crop",p);
var TotWidth = aRect[2] - aRect[0]
if (ARG<=3 || ARG==5)
{var fd = this.addField("xftDate", "text", p, [30,15, TotWidth-30-30,30]);
//print output?
fd.value = util.printd(AcDateFormat, AcDate) + " (" + FileNM +")";
// TEXT SIZE SETTING
fd.textSize=12; fd.readonly = true;
if (ARG==1){ fd.alignment="left" };
if (ARG==2){ fd.alignment="center" };
if (ARG==3){ fd.alignment="right" };
if (ARG==4 || ARG==5)
{var bStart=(TotWidth/2)-(Box2Width/2)
var bEnd=((TotWidth/2)+(Box2Width/2))
var fp = this.addField(String("xftPage"+p+1), "text", p, [bStart,30,bEnd,15]);
// print output?
fp.value = "Page: " + String(p+1)+ "/" + this.numPages;
// TEXT SIZE SETTING
fp.textSize=12; fp.readonly = true;
fp.alignment="center";
//==========================================================================
function RemoveFooter(ARG)
if (ARG<=3 || ARG==5) {var x = this.removeField("xftDate");}
if (ARG==2 || ARG==5) {for (var p = 0; p < this.numPages; p++)
var x = this.removeField(String("xftPage"+p+1)); }
will

Putting this in a batch file within the automation function of Acrobat
delivers the goods, I need to investigate the formatting of the output to
get them to line up, have taken the middle ground and gone for a central
position for the page x/y text...... some lines are redundant
Dr B
===========================================
var re = /.*\/|\.pdf$/ig;
var FileNM = this.path.replace(re,"")+".pdf";
var Path = this.path;
var AcDate = new Date();
var AcDateFormat = "yyyy/mmm/dd HH:MM"
var Box2Width = 50
for (var p = 0; p < this.numPages; p++)
var aRect = this.getPageBox("Crop",p);
var TotWidth = aRect[2] - aRect[0]
       var fd = this.addField("xftDate", "text", p, [30,15,
TotWidth-30-30,30]);
       fd.value = FileNM;
       fd.textSize=12; fd.readonly = true;
       fd.alignment="left";
var bStart=(0);
var bEnd=(TotWidth);
       var fp = this.addField(String("xftPage"p1), "text", p,
       fp.value = "Page: " + String(p1) "/" + this.numPages;
       fp.textSize=12; fp.readonly = true;
       fp.alignment="center";

Split filename and create folders with Powershell script ( --newbie user)

I have a folder with 1000's of files. Each file varies in length; typically between 9-14 characters. Example:
C:\workpics\1238955678.1
C:\workpics\744556224.1
C:\workpics\744556224.2
C:\workpics\8445655996.1
I would like to run a script to split the filename and separate into folders. The filename would then consist of 5 characters, the foldername would be the first characters remaining.
C:\workpics\12389\55678.1
C:\workpics\7445\56224.1
C:\workpics\7445\56224.2
C:\workpics\84456\55996.1
Any assistance to create this Powershell script would be awesome. Thank you!!

I have a folder with 1000's of files. Each file varies in length; typically between 9-14 characters. Example:
C:\workpics\1238955678.1
C:\workpics\744556224.1
C:\workpics\744556224.2
C:\workpics\8445655996.1
I would like to run a script to split the filename and separate into folders. The filename would then consist of 5 characters, the foldername would be the first characters remaining.
C:\workpics\12389\55678.1
C:\workpics\7445\56224.1
C:\workpics\7445\56224.2
C:\workpics\84456\55996.1
Any assistance to create this Powershell script would be awesome. Thank you!!
Please reread your request. It makes no sense. Read each statement carefully and notice that the statements are in conflict.
Start your scrip in PowerShell. Look up things like how to list files and how to manage strings. All of the information you need is here:
http://technet.microsoft.com/en-us/scriptcenter/dd793612.aspx
¯\_(ツ)_/¯

Verify filename and password

I am trying to listen to a internet radio station that I used to listen to before and now I get an error that reads: "Cannot open file. Verify that the filename and path are correct and try again". I have other friends who listen to the station with no problems and I wonder why can't I listen to it.
I am opening the browser in Rosetta mode and I am using Windows Media Player 9 for mac. I have tried everything and dont know where else to ask.
Thanks!

Hi and Welcome to the Community!
Sadly, based on your report, there are more questions than answers...there are many things that could meet the criteria as you have stated it:
Your actual email account credentials
Your BIS account credentials
Your BBID account credentials
Your device lock password
From what you have reported, I cannot tell which of these might actually be your issue...so I'll make a few guesses, from which hopefully you'll be able to find what you need:
If the problem is with your email account credentials, then contact the service provider of that email account.
If the problem is your BIS account credentials, then contact your mobile service provider.
If the problem is your BBID credentials, then refer:
http://supportforums.blackberry.com/t5/BlackBerry-World/How-to-regain-access-to-your-BBID/td-p/25467...
If the issue is your device lock password, then there is no hope -- there is no "master" nor "override" password to unlock your device...only the user-created device lock password can do so. Failing that, your BB will wipe totally clean and you will have to start over.
Hopefully, this information will be of use to you.
Cheers, and Good Luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Given filename or path contains Unicode or double-byte characters.Retry using ASCII characters for filename and path What does this mean? it happen when I publish an OAM

Given file name or path contains Unicode or double-byte characters. Retry using ASCII characters for filename and path
What does this mean? It is happening when I try to publish an OAM for Dreamweaver.
Also: How can I specify the browser in Edge Animate? It is just going wherever. Are there no Preferences for Edge Animate?
BTW. Just call it Edge. Seriously. Do you call it Illustrator Draw? Photoshop Retouching?

No, my file name is mainContent.oam
My project name is mainContent.an
This error happens when I try to import into Dreamweaver. Sorry, I wasn't clear on that earlier.
I thought maybe it was because I had saved my image as a png. So re-saved as a svg, still get the error.
DO I have a setting is Dreamweaver CC that is wrong? Should I try this in Dreamweaver CS6? I might try that next.
Why is this program so difficult? I know Flash. I know After Effects. I can work the timeline part just great. It's always in the export that I have problems.
On a MacPro, 10.7.
Are you an Adobe person or just a nice helper?

Add filename and path to Designer form footer.

I am somewhat of a novice at creating forms in Livecycle designer and need help adding a filename and path to the footer of a form after clicking on the "save as' button. I have not found any answers anyplace so help would be greatly appreciated ASAP. Thank you!!

Create a field on your masterpage. Get rid of the caption, appearance=none and set as Protected. Also set your width to expand to fit. In the layout:ready event of your field, add this JavaScript:
this.rawValue=event.target.path
That should do it.
Kyle

Show filename and path of report on dashboard

Is it possible to (automatically) show the filename and path of reports on a Dashboard?

hi,
we do that using Usage Tracking
Refer : http://obiee101.blogspot.com/2008/08/obiee-setting-up-usage-tracking.html
Thanks,
Saichand.v

Filename and InboundHeader

Similar Messages

Maybe you are looking for