Filename issue when publishing to NAS

Despite different settings, files are always exported wrong to my NAS (Synology). Original Filename: e.g."2013-08-01-Portraits Angelina-01.dng", exported filename always: "2013-Angelina Portraits-01.jpg". I tried different export modifications of the filename (date-user defined name-counter) or just the original filename- and always ending up with the same export name. I already checked the metadata- in lightroom, everything seems OK to me.
I didn't have this issue when simply exporting e.g. into a folder on my desktop.
Any hints?
Another question: when renaming files, all files are correctly renamed except copies (e.g. when creating mutations from the same original)... I would appreciate them to be renamed in the same order like the originals...

P.S. May this issue be caused due to a missing underscore, e.g. Portraits_Angelina? And why do I have this problem only on the Synology? Different file name convention..?

Similar Messages

  • Cap 6:  Issue when publish to PDF.  The exit button on the skin does not seem to work.

    All, 
    I attemped same using Cap 6:  Issue when publish to PDF.  The exit button on the skin does not seem to work.  I switched out skins and same issue.  I am using IE8. 
    When published as swf, exit button on skin works fine.  Any ideas on solve for the PDF version exit button?  We would rather publish as PDF since all files are contained in the PDF wrapper.

    Hello,
    Welcome to Adobe Forums.
    This issue is reproducble at my end, need to do some more testing before I can tell you any solution or action plan for this issue
    Thank you for your patience.
    Regards,
    Vikram

  • Captivate 6 rendering issues when publishing flash only

    Hello,
    I wanted to ask if anybody else is experiencing the same issue as I am experiencing when I publish my captivate 6 projects:
    Issue:
    Project consists of 46 slides.  No advanced actions.  Multiple rollover images and text captions are on several slides. software capture
    When publishing to a USB or my desktop then previewing I get rendering issues and these vary from parts of the software that I am capturing not appearing at all to my master slide templates disappearing.  Whenever this happens I try publishing to flash 10 and ctick the force republish of all slides - sometimes this fixes the problem sometimes it does not.  So I try publishing to flash 9 force republish of all slides sometimes this fixes the problem sometimes it does not.  It is just so hit and miss I have to publish 4 to 5 times before I finally am successful.  So of course this is extremely frustrating when I have to make changes to the project and republish.
    Also notice that viewing in web browser has the same issue.
    Think I am going to have to go back to captivate 5.5, which is such a shame as I really love some of the new features in 6.
    Does anybody have any ideas as to why this may be happening?
    I have attached two screen dumps - one where the screen is rendered poorly and the other where I have crossed all of my fingers and toes and republished and the screen has been rendered correctly:
    Thanks
    Ali

    Hello Sankaram,
    I am experiencing the same problem as Ali, where my master slide randomly disappears in my published project. I tried the options you listed above. I also deselected "Use Master Slide Background" and "Project Background" on each slide.
    Also, I have a button on each slide (next button to move through the slides) and sometimes disappears as well. However, I can still click in that region where it should be visible, and it will progress to the next slide.
    Any suggestions?
    Thanks,
    Jackie

  • Intermittent issues when publishing FSG Reports to Excel

    Hi,
    Could you assist me.
    Our Client are on 12.1.3 and are having intermittent issues when trying to publish FSG's to Excel. At times it sucessfully works straight away and other times it wont do anything.
    They state "When a report is published it will open Excel show some purple/yellow formatting will show but will then quickly revert to a blank spreadsheet and goes no further or completes".
    Has this been seen before?
    Many Thanks
    Matt

    Did you customize the existing templates? Please let me know the template name (seeded) which seems to create problem.
    Cheers,
    ND
    Use the "helpful" or "correct" buttons to award points to replies / Mark the thread as answered, if your question is answered.

  • Content title/filename issues when contributing content from Outlook

    Hi,
    We have a critical issue with content title/file name when contributing content from within MS Outlook (2003) using the Desktop Integration Suite (11g) component.
    Either by copy-paste, or by drag-n-droping of an email item to a Contribution Folder in CS, the filename and content title are displayed as coded characters, instead of the email subject.
    e.g
    If an email item with subject "Oracle Magazine - July/August 2010" is being copied to CS contribution folders, its title should be "Oracle Magazine - July/August 2010" and file name something like "Oracle Magazine - July/August 2010.msg". Instead it gets a name that looks like this "0881FC3B-F733-46D3-869F-AB73F352D25F.msg" and title "0881FC3B-F733-46D3-869F-AB73F352D25F".
    Is there a solution for this, any configuration we are missing here so that we get a readable title and/or filename.
    thanks in advance

    Hi Srinath,
    We are using UCM 10gR3 (10.1.3.5.1). We tried both DIS 10gR3 (build 8.xxx) and 11g (build 9.xxx) with no result.
    And I am not able to find something in the documentation that could lead to a solution.

  • Filenaming problem when publishing to hard disk in LR4

    I want to export (publish) a collection of photos from LR4 to a photo album on my iPad. I use the method that Russell Brown promotes in his nice video on the subject (for LR3). The key to making this work, as he points out, is to assign a sequential file name to the published files and to strip the date metadata from these files so that the iPad is forced to sort by filename.To this end I select the "Custom Name - Sequence" and "Copyright Only" options in the publishing manager.
    I want to maintain the same file order in the published photos that I have in my user-ordered collection (oftentimes I have already created a slideshow from this collection). So when I hit "Publish", LR4 should start with the upper leftmost (first) photo in the collection and name it, for example, "Birthday-1.jpg", then "Birthday-2.jpg",etc., until it gets to the lower rightmost (last) photo in the collection and name it "Birthday-10.jpg" for a ten-photo collection.
    Here's the problem: sometimes it does this just fine and other times it starts with the last photo in the collection and names it "Birthday-1.jpg", etc., so that the order in which the photos appear in the iPad album is reversed. Reversing the order of the photos in the collection before publishing seems to have no effect.
    Is this a bug or am I missing some step in the set up?
    Thanks,
    Bruce

    Not pertinent to your question about a potential bug, but a side note regarding how to view your LR results on an iPad:
    To overcome such limitations I have turned to export Slideshows as PDF for display on the iPad (which I use iBooks for). Of course, technically no photos arriving there, but it does exactly the sequence I want...
    I do not achieve using the full iPad screen in doing so, but can add annotations e.g. from caption metadata to tell the story.
    For getting images nicely full-screen on an iPad I recommend Jeffrey Friedl: http://regex.info/blog/lightroom-goodies/crop-for-ipad ... but he went for random order.
    Cornelia

  • Secure Zone Log In Box issues (when published from Muse)

    I can't log in to one secure zone when I publish the log in box from Muse. When I put the same log in box on a page in Business Catalyst, I am able to use it to log in. However when I take the log in box code and publish from Muse, it keeps denying access. All other log in boxes for other secure zones on the site are working but they have been in place for a while. Has something changed with a newer version of Muse?
    Is there a work around for this (like the way webforms made in BC now have to published in BC and submitted to prevent deletion by publication from Muse)?

    Please share the link to the page where the form is placed , along with test user login details, so that we may further look into this. Also a screenshot demonstrating the issue you facing would be of great help.

  • Issue when publishing application on Weblogic 12c

    Hi everybody,
    I am facing a strange issue with my web application when I try to deploy it on the web server (for information, I am working with Eclipse). I am saying that it is strange because it is not happening all the time (most of the time it is happening after a refresh of project sources to integrate changes made by other developers of the team). The second part why it is strange is because it is giving an error message that doesn't make sense for me as the class ApplicationServlet mentioned is present in my project and has no annotations inside.
    Below is the error message :
    weblogic.application.ModuleException: [HTTP:101371]There was a failure when processing annotations for application C:\workspaces\.metadata\.plugins\org.eclipse.core.resources\.projects\sample-app\beadep\sample_domain\sample-app. Ensure that the annotations are valid. The error is com.toto.sample.application.ApplicationServlet
    And this is the stack trace :
    java.lang.Exception: Exception received from deployment driver. See Error Log view for more detail.
        at oracle.eclipse.tools.weblogic.server.internal.DeploymentProgressListener.watch(DeploymentProgressListener.java:190)
        at oracle.eclipse.tools.weblogic.server.internal.WlsJ2EEDeploymentHelper.deploy(WlsJ2EEDeploymentHelper.java:506)
        at oracle.eclipse.tools.weblogic.server.internal.WeblogicServerBehaviour.publishWeblogicModules(WeblogicServerBehaviour.java:1466)
        at oracle.eclipse.tools.weblogic.server.internal.WeblogicServerBehaviour.publishToServer(WeblogicServerBehaviour.java:898)
        at oracle.eclipse.tools.weblogic.server.internal.WeblogicServerBehaviour.publishOnce(WeblogicServerBehaviour.java:686)
        at oracle.eclipse.tools.weblogic.server.internal.WeblogicServerBehaviour.publish(WeblogicServerBehaviour.java:539)
        at org.eclipse.wst.server.core.model.ServerBehaviourDelegate.publish(ServerBehaviourDelegate.java:774)
        at org.eclipse.wst.server.core.internal.Server.publishImpl(Server.java:3153)
        at org.eclipse.wst.server.core.internal.Server$PublishJob.run(Server.java:345)
        at org.eclipse.core.internal.jobs.Worker.run(Worker.java:53)
    Caused by: weblogic.application.ModuleException: [HTTP:101371]There was a failure when processing annotations for application C:\workspaces\.metadata\.plugins\org.eclipse.core.resources\.projects\sample-app\beadep\sample_domain\sample-app. Ensure that the annotations are valid. The error is com.toto.sample.application.ApplicationServlet
        at weblogic.servlet.internal.WebAppModule.prepare(WebAppModule.java:732)
        at weblogic.application.internal.flow.ScopedModuleDriver.prepare(ScopedModuleDriver.java:188)
        at weblogic.application.internal.ExtensibleModuleWrapper.prepare(ExtensibleModuleWrapper.java:83)
        at weblogic.application.internal.flow.ModuleListenerInvoker.prepare(ModuleListenerInvoker.java:100)
        at weblogic.application.internal.flow.ModuleStateDriver$1.next(ModuleStateDriver.java:172)
        at weblogic.application.internal.flow.ModuleStateDriver$1.next(ModuleStateDriver.java:167)
        at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:35)
        at weblogic.application.internal.flow.ModuleStateDriver.prepare(ModuleStateDriver.java:38)
        at weblogic.application.internal.flow.DeploymentCallbackFlow.prepare(DeploymentCallbackFlow.java:139)
        at weblogic.application.internal.flow.DeploymentCallbackFlow.prepare(DeploymentCallbackFlow.java:55)
        at weblogic.application.internal.BaseDeployment$1.next(BaseDeployment.java:706)
        at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:35)
        at weblogic.application.internal.BaseDeployment.prepare(BaseDeployment.java:237)
        at weblogic.application.internal.SingleModuleDeployment.prepare(SingleModuleDeployment.java:48)
        at weblogic.application.internal.DeploymentStateChecker.prepare(DeploymentStateChecker.java:158)
        at weblogic.deploy.internal.targetserver.AppContainerInvoker.prepare(AppContainerInvoker.java:60)
        at weblogic.deploy.internal.targetserver.operations.ActivateOperation.createAndPrepareContainer(ActivateOperation.java:207)
        at weblogic.deploy.internal.targetserver.operations.ActivateOperation.doPrepare(ActivateOperation.java:96)
        at weblogic.deploy.internal.targetserver.operations.AbstractOperation.prepare(AbstractOperation.java:229)
        at weblogic.deploy.internal.targetserver.DeploymentManager.handleDeploymentPrepare(DeploymentManager.java:747)
        at weblogic.deploy.internal.targetserver.DeploymentManager.prepareDeploymentList(DeploymentManager.java:1216)
        at weblogic.deploy.internal.targetserver.DeploymentManager.handlePrepare(DeploymentManager.java:250)
        at weblogic.deploy.internal.targetserver.DeploymentServiceDispatcher.prepare(DeploymentServiceDispatcher.java:159)
        at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer.doPrepareCallback(DeploymentReceiverCallbackDeliverer.java:171)
        at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer.access$000(DeploymentReceiverCallbackDeliverer.java:13)
        at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer$1.run(DeploymentReceiverCallbackDeliverer.java:46)
        at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTuningWorkManagerImpl.java:545)
        at weblogic.work.ExecuteThread.execute(ExecuteThread.java:256)
        at weblogic.work.ExecuteThread.run(ExecuteThread.java:221)
    Caused by: java.lang.ClassNotFoundException: com.toto.sample.application.ApplicationServlet
        at weblogic.utils.classloaders.GenericClassLoader.findLocalClass(GenericClassLoader.java:297)
        at weblogic.utils.classloaders.GenericClassLoader.findClass(GenericClassLoader.java:270)
        at weblogic.utils.classloaders.ChangeAwareClassLoader.findClass(ChangeAwareClassLoader.java:64)
        at java.lang.ClassLoader.loadClass(ClassLoader.java:423)
        at java.lang.ClassLoader.loadClass(ClassLoader.java:356)
        at weblogic.utils.classloaders.GenericClassLoader.loadClass(GenericClassLoader.java:179)
        at weblogic.utils.classloaders.ChangeAwareClassLoader.loadClass(ChangeAwareClassLoader.java:43)
        at weblogic.servlet.internal.AnnotationProcessingManager.processServlets(AnnotationProcessingManager.java:214)
        at weblogic.servlet.internal.AnnotationProcessingManager.processAnnotationsInWebXml(AnnotationProcessingManager.java:201)
        at weblogic.servlet.internal.AnnotationProcessingManager.processAnnotations(AnnotationProcessingManager.java:105)
        at weblogic.servlet.internal.AnnotationProcessingManager.processAnnotations(AnnotationProcessingManager.java:81)
        at weblogic.servlet.internal.WebAppModule.processAnnotations(WebAppModule.java:1828)
        at weblogic.servlet.internal.WebAppModule.prepare(WebAppModule.java:717)
    To be honest I don't really know what is causing this and how I can solve it. I would appreciate if somebody can help me on this.
    Thanks in advance    

    Well, under Filters --> Char Restrictions & Default Values, I have the chars arranged in a particular order. But on the portal, under the 'Free Chars' tab, I still see them arranged in alphabetical order. So, my query seems to have no effect on how the FCs are being displayed on the portal.
    Can I change something in the web template? Or is this a portal property?
    Regards.

  • Widget (interaction) size and font issues when published in HTML 5

    I'm using Captivate 7 and when I create and preview widget interactions (accordian, tab, etc.) the sizing and font look correct. However, when I publish it to HTML 5, it is not the right size, is left justified rather than centered, and does not have the custom font (defaults to Arial).
    Is there anything I can do to fix this? Please help!

    Adobe writes inline css for the font on that widget, in the CPM.js file. You's have to create a new class and and write your own rules using @font-face to ensure end-users can use the font. SWF files can embed fonts, but html does not.
    If the user doesn't have to font you use it will default.
    This is an example of how the Header title and instruction of the widget is written:
    <headerTitle><font face="Arial" style="Arial" size="23" align="LEFT"/>
              <textDecoration bold="true" underline="false" italic="false"/>
              <color textColor="0xffffff" highlightRequired="false" highlightColor="0xffff99" highlightState="false"/>
            </headerTitle>
    <headerInst><font face="Georgia" style="Georgia" size="14" align="LEFT"/>
              <textDecoration bold="false" underline="false" italic="true"/>
              <color textColor="0xb9dff6" highlightRequired="false" highlightColor="0xffff99" highlightState="false"/>
    </headerInst>

  • Due to NAS issues, when I started a new time machine backup it did not have the old backups available. My question is do I need to delete them or will time machine automatically reclaim the space?  Only one Sparse Bundle, same name.

    Due to NAS issues, when I started a new time machine backup it did not have the old backups available. My question is do I need to delete them or will time machine automatically reclaim the space?  There is only one sparse bundle but when I enter time machine I don't see my historic backups.  I use a synology DS212 for my time machine.  Started a new backup which is 218gb but it says 618 gb is occupied  therefore it looks like 2 or 3 backups are still on the disk. Before my NAS issues the last backup was in 2014.  As you can see there is a second sparse bundle from 2012.  Not sure what that is.

    This is an old message now, but what happened to me similarly was:
    I had a major computer crash and through complicated pathways ended up reinstalling (Mavericks) as a new user (long story).
    At least I had good Time Machine backups on an NAS drive (Synology DS212j), or so I thought - when I started Time Machine up again, the old backup file was gone, replaced by a new one using my "new computer" name. The old file was gone both by directly mounting the NAS drive and by clicking "Enter Time Machine".
    It's like I had {OldShareName}.sparsebundle and then it was replaced by {NewShareName}.sparsebundle, all of the old info vanished.
    (I have spent a week finding old files elsewhere and have completed a satisfactory self-restore. It pays to "archive" [my own variation of] as well as "back-up".)
    My belief is that if this were a wired-netword-drive, e.g. plugged right into my iMac with a USB cable, then the old file would have remained.
    But this is an NAS drive, connected directly to my Airport wireless router, and I don't know the significance of the fact that it stores its Time Machine backups as "sparsebundle" files rather than simply as plain(er) files.
    As usual when things get complicated with computers (not just Apple computers) there was never a warning message. Something like "YOU'RE ABOUT TO DELETE A TIME MACHINE BACK-UP FILE!!!" would have made my life a lot simpler.
    BTW, I did try a "restore from Time Machine" option the first thing I had my "new computer" (old hardware, 2009 iMac) up and running, using Migration Assistant, and it ran for many hours and then failed in the wee hours - what that has to do with anything I'm not sure.
    I'm not sure that I have a question about this other than "why do these things happen to me?", but it's a warning. Apart from that I've been very happy with the stability and reliability (but not the cost or set-up complexity) of NAS vs. directly-cabled external drives.
    Charles

  • Captivate 8 - Issue with interactions when publishing to html5

    Has anyone else had difficulty with the built-in learning interactions when publishing to html5?  Are they incompatible?  We've had a few hiccups with things as we do all publishing to html5 and there seem to be some disconnects.

    Thanks Shriyansh. I've emailed you with a link to download the project along with the following additional details:
    Browsers I'm testing for compatability (all are up-to-date as far as I know):
    - Also, the slides that were repeating yesterday aren't repeating today
    Chrome 38.0.2125.104 m
    Internet Explorer 11.0.9600.17358
    Safari for Windows 5.1.7
    Firefox 33.0 (Captivate says Firefox doesn't support the content so I'm not expecting a solution for FF, however, firefox repeats the first slide very consistently)
    Publish settings (pretty much the defaults):

  • Report works fine in VS2010 but simply doesn't show when published

    Problem:
    Crystal Report works fine in VS 2010 but doesn't show when published to web-server, there is no error, it simply doesn't show.
    Background:
    Installed VS2010 on a freshly installed and fully updated (.net 4.0 is included in the updates) windows server 2003 box with production release Crystal Report 2010. Nothing else is on the server.  IIS 6 is running.  My web-server and VS2010 is on the same box.
    I went ahead and created a new asp.net 4.0 web project called webapplication1. Thereafter, i put a few controls (text-boxes, list-boxes and so on)  on the default.aspx page. Then i created a report.aspx page. This page will have the crystal report viewer on it. I went ahead and set the report up without much hassle (got how-to's from the internet).  I successfully tested my web app with the built-in testing server, the beautiful crystal report presented exactly what i asked it to. There was one recurring "Sys.Application is null or not an object" hiccup that occured every time during testing when i navigated from the default.aspx page to the report.aspx page (the page the report is on). Clicking ignore or continue  on the dialogue box that comes up because of the hiccup will allow testing to continue.  Here's a screen-shot of this recurring hiccup.
    http://i440.photobucket.com/albums/qq122/ricom_19/Testing-Error.jpg
    As i've shown, testing went great, except for the hiccup. I now moved to setup a publish profile. Since my web-server and VS2010 is on the same box this seemed relatively straight forward. All the files went over except the report, i.e. crystalreport1.rpt  file. I solved this by  setting the build action to 'Content' in the CrystalReport1.rpt properties. I did a republish. Now i have all my files, see screenshot: [http://i440.photobucket.com/albums/qq122/ricom_19/Application-Home-Directory.jpg], on the web-server.
    I proceeded to try to browse to my app from another computer on my network. This was successful until i tried to navigate to the report.aspx page that the crystal report is on. The the report.aspx page loaded but the crystal report was simply not on it. No errors, not even the hiccup from testing occured. Its as if the crystal report viewer was never on the page to begin with. Only when i right clicked on the page and 'view source'  did i see some remnants of the crystal report viewer.
    Here is the Report.aspx page when tested in VS2010:
    [http://i440.photobucket.com/albums/qq122/ricom_19/successful-Test.jpg|http://i440.photobucket.com/albums/qq122/ricom_19/successful-Test.jpg]
    Here is the Report.aspx page when published to the web-server and browsed to from another computer on the network:
    [http://i440.photobucket.com/albums/qq122/ricom_19/Reportviewer-Disappear.jpg|http://i440.photobucket.com/albums/qq122/ricom_19/Reportviewer-Disappear.jpg]
    Details of adding report to my web app:
    1) Populate my dataset then write the XML schema, reportschema.xml
    2) Added the crystal Report to the project then used the wizard to navigate to the reportschema.xml. Of course i had to create new connection in Database expert. see screen-shot:
    [http://i440.photobucket.com/albums/qq122/ricom_19/CR-Database-Expert.jpg|http://i440.photobucket.com/albums/qq122/ricom_19/CR-Database-Expert.jpg]
    3) I formatted the report the way i wanted it
    4) Added the Crystal report viewer on the Report.aspx page
    5) In the code-behind of the Report.aspx page i bound the viewer to a report document that is loaded with CrystalReport1.rpt file
    see screenshot: [http://i440.photobucket.com/albums/qq122/ricom_19/Report-Page-Code-behind.jpg]
    That's it.  As mentioned, it tested fine in VS2010 but the viewer doesn't show when i publish to the webserver. I wrote a crystal report in .net about 8 years ago. Things have changed soooo much since then.
    I am wondering if its a license issue? Was also wondering if it had anything to do the testing hiccup, even though research is suggestion the two are unrelated.
    I've described my actions as best as i could (without getting into ridiculous detail) and have included screen-shots of relevant stages of the process. Have a look and tell me your thoughts. Thanks.

    The "Sys.Application is null or not an object" issue is known, submitted for a resolution and documented in KB #1528503. Unfortunately the KB search has been down the last couple of days...
    However, the issue is limited to compile time and does not affect a completed application.
    Re. the viewer missing. Sounds like the viewer directory did not get created or configure correctly. Before I get to that. You mention:
    "I proceeded to try to browse to my app from another computer on my network."
    This bring up the question: If you run the app right on the app server. e.g.; not a client computer, does the viewer and report come up? Is this issue isolated to client computers on the network?
    I suspect that the issue exists irrespective of which computer you try to see the report from - but that is an assumption. If the assumption is correct, see [this|https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/50aa68c0-82dd-2b10-42bf-e5502b45cd3a] article on configuring the viewer. The article does not have CR4VS2010 documented, but you should be able to guide your self using the article. I think the pattern will be obvious.
    Ludek

  • How do I get the RSS feeds to work in iWeb'08 when published to FTP server?

    There are so many unresolved questions because I have published to an FTP server (Netfirms). HOWEVER, my next task at hand is to resolve the issue of a non-working RSS feed and download capabilities.
    The published website is www.vibrationalvoyages.com.
    When using Cyberduck to upload to Netfirms, I have to call the file name vibrationalvoyages.com because Netfirms organizes my files under a main folder called www (I also purchased the .org and .net extensions along with the singular spelling of the title, have forwarded those url's to the .com extension, which means I have different website names under Netfirm's main folder www, all pointing to www.vibrationalvoyages.com).
    I have to drop the www. in front of vibrationalvoyages.com when publishing to a folder on my computer so, when Cyberduck uploads the files into the main www folder, they are read correctly and published as www.vibrationalvoyages.com. In Cyberduck, the ftp address to upload is vibrationalvoyage.netfirms.com
    Before uploading, I use iTweak to insert the Statcounter tracking codes. Then, I use Rage to optimize the site to cut down on the weight (lots of photos). Then, finally, I get to upload which takes about an hour and a half.
    SO, HOW DO I GET THE RSS FEEDS TO WORK AS WELL AS THE OPTION TO DOWNLOAD AN MP3 RECORDED MEDITATIONS? I eventually also want to include the download option of podcasts.
    Please help! I am doing the best I can to stay in love with Mac but he is turning out to be a pot load of work and the love affair is wearing a little thin.
    I haven't even asked about why iWeb still calls some pages 'The family picnic" or why it switches the url addresses to the individual pages. Probably because in the early stages, I copied an entry rather than just do a new one... but I'll worry about that later. I want to get this 'fixed' first and then I'll address the issue, following Roddy's advice to another writer about installing a flash player, for easy download of the MP3 meditations and for when I record the lessons as podcasts. Until I get this RSS issue resolved, however, podcast downloads are out of the question!

    Thank you for checking, Tom,
    I'm confused. What do YOU get when you push the feed button? And why is it working on yours and not either of my machines?
    Today, my Mac (w/Safari 4) gets the same error message: Safari can’t open the page Safari can’t open the page “feed:http://vibrationalvoyages/vibrationalvoyages.com/DivineLight_Vibrations_Principles_andApplications/rss.xml”. The error is: “The feed could not be loaded because the content is not in a known feed format.”
    My little ASUS (with a Linux operating system) gets a screen that says "The requested URL was not found". The URL on that page is http://vibrationalvoyages./vibrationalvoyages.com/DivineLight_Vibrations_Principles_andApplications/rss.xml
    On both error messages, the URL I was checking was:
    http://www.vibrationalvoyages.com/DivineLight_Vibrations_Principles_and_Applications/Divine_Light_Vibrations_Principles_ andApplications.html
    The last URL was, of course, the URL generated by iWeb.
    So, my question still is:
    HOW CAN I GET MY FEEDS TO WORK PROPERLY? If the problem is there shouldn't be an http:// after feed: then, how do I get iWeb to set it up properly?
    Any ideas?
    GG

  • About the error: "The account is not authorized to login from this station" when you access NAS devices from Windows 10 Technical Preview (build 9926)

    Scenario:
    With the release of Windows 10 Technical Preview (build 9926), some users may encounter an error message of “The account is not authorized to login from this station” when trying to access remote files saved in NAS storage. In
    addition, the following error log may also be found via Event Viewer:
    Rejected an insecure guest logon.
    This event indicates that the server attempted to log the user on as an unauthenticated guest but was denied by the client. Guest logons do not support standard security features such as signing and encryption. As a result,
    guest logons are vulnerable to man-in-the-middle attacks that can expose sensitive data on the network. Windows disables insecure guest logons by default. Microsoft does not recommend enabling insecure guest logons.
    Background:
    The error message is due to a change we made in Windows 10 Technical Preview (build 9926) which is related to security and remote file access that may affect you.
    Previously, remote file access includes a way of connecting to a file server without a username and password, which was termed as “guest access”.
    With guest access authentication, the user does not need to send a user name or password.
    The security change is intended to address a weakness when using guest access.  While the server may be fine not distinguishing among clients for files (and, you can imagine in the home scenario that it doesn’t
    matter to you which of your family members is looking at the shared folder of pictures from your last vacation), this can actually put you at risk elsewhere.  Without an account and password, the client doesn’t end up with a secure connection to the server. 
    A malicious server can put itself in the middle (also known as the Man-In-The-Middle attack), and trick the client into sending files or accepting malicious data.  This is not necessarily a big concern in your home, but can be an issue when you take your
    laptop to your local coffee shop and someone there is lurking, ready to compromise your automatic connections to a server that you can’t verify.  Or when your child goes back to the dorm at the university. The change we made removes the ability to connect
    to NAS devices with guest access, but the error message which is shown in build 9926 does not clearly explain what happened. We are working on a better experience for the final product which will help people who are in this situation. 
    As a Windows Insider you’re seeing our work in progress; we’re sorry for any inconvenience it may have caused.
    Suggestion:
    You may see some workarounds (eg. making a registry change restores your ability to connect with guest access).
    We do NOT recommend making that change as it leaves you vulnerable to the kinds of attacks this change was meant to protect you from.
    The recommended solution is to add an explicit account and password on your NAS device, and use that for the connections.  It is a one-time inconvenience,
    but the long term benefits are worthwhile.  If you are having trouble configuring your system, send us your feedback via the Feedback App and post your information here so we can document additional affected scenarios.
    Alex Zhao
    TechNet Community Support

    Hi RPMM,
    Homegroup works great in Windows 10 Technical Preview (9926 build), when I invited my Windows 10 Technical Preview (9926 build) joined in HomeGroup, I can access the shares smoothly:
    My shares settings is like this:
    Alex Zhao
    TechNet Community Support

  • Printing issues when printing to Server 2008 R2 Print Server

    We have a problem with netwok printing that encompasses many different areas and versions of Windows OSes so I will be posting this in a few different places.
    Let me lay this out for you. We have a single Server 2008 R2 print server with 300 printers of various models. This print server has both 32 and 64-bit drivers installed for every printer. For the HP printers we are using the HP Universal Printing PCL 6
    (version 61.94.3.37) and for the Ricoh printers we are using their PCL6 driver for universal printing version 3.5. All drivers run in Isolation mode and no printer gets published to AD.
    We have a mix of Windows clients printing to these printers, both XP Pro and Windows 7 32 and 64-bit.
    Now for the problems: The other day one Isolation host on the server went crazy, processing was hitting 100% and memory was fluctuating and growing a lot. After investigating a little that isolation host was having issues accessing the Ricoh Driver (which
    was 3.4 at the time). In an attempt to resolve the issue we updated the driver to V. 3.5. This seemed to fix the isolation issues and things calmed down however this is the beginning of many other issues for the clients. Both Windows OS versions (XP and 7)
    don't seem to be either downloading and installing the updated driver and/or doing so correctly. Clients are now experiencing extremely slow printing, applications such as Word, Outlook, Excel and others open slowly and it can take 2-3 minutes for print dialog
    boxes to open. In all cases it seems that we have to have a tech delete the printer(s), delete the driver and then re-install the printer to make things better but for some reason, which is really unknown, this process doesn't work for every machine and on
    some we can't even remove the old drivers at all without booting into SafeMode and doing it that way.
    With all of that said, are there any suggestions as to why the clients aren't downloading and installing the drivers from the server correctly? How to avoid these issues when we need to upgrade the drivers on the server in the future? Most importantly right
    now, are there any recommendations or scripts on how to force the deletions of the printer, driver, reset the print spoolers and then re-add the printers in a more automated fashion?
    I have played with both wmic, pnputil and printuidll and am trying to put something together but without a set solution that will work consistently it becomes a lot more difficult.

    We are experiencing a very similar issue.
    Windows Server 2008 R2. Printers are deployed over group policy.
    Clients range from Windows 7 to Windows 8. Citrix XenDesktop and XenApp environment also connects to these endpoints.
    We have A wide assortment of HP printers, and Ricoh Printers.
    For the ricoh's we have been historically using the PCL6 drivers for the individual device type (not universal print). Up till recently, it all was working fine, until about some time in the middle of june, when everything just seemed to go crazy.
    The issue was resolved by moving off from the PCL 6 drivers and using the PCL5e driver counterparts on all of our ricoh printers.
    It would crash XenDesktop applications, it would crash office applications.
    The print spooler would lock up, even if the ricoh printers were not actually used, just as long as they were loaded.
    Even after loading PCL5 on the servers, some of the clients would simply not download the PCL5 version of the driver from the print server. In order to resolve this, I have created the steps below. Be advised, this may possibly cause damage on your system.
    We just found it worked great for us. Local printers will likely have to be manually reinstalled after this.
    Directions
    Stop the print spooler
    Open C:\Windows\System32\Spool and delete the following
    All files in SERVERS
    All files in PRINTERS
    All files in drivers
    All files in prtprocs
    Start the print spooler
    Open a command prompt as administrator, and run the following command
    Cscript C:\windows\system32\Printing_Admin_Scripts\en-US\prndrvr.vbs -x
    This should further delete all print drivers.
    Open a command prompt as a standard user (not administrator) and run the following
    Gpupdate
    Now wait. It takes a while, but the printers will slowly start to repopulate.
    I am still not sure what is going on with the PCL6 drivers for ricoh, and why this issue is happening. I'm guessing it has something to do with the Ricoh auto update that is included in their pcl6 drivers. Maybe some sort of auto update happened recently.

Maybe you are looking for

  • Regarding the key mapping for 10g forms as in 6i forms

    Hi All, I want the kep mappings of oracle forms 6i to be implemented in oracle forms 10g. I have made the changes in the fmrweb.res file as shown below. Can any one just check it once and let me know whether the mapping is correct?. 116 : 1 : "Shift+

  • Where do I save?

    If I import an open file file from iphoto into Photoshop, where do I then save it once I have made my changes, so I can see the new edited version in iPhoto? I have just edited a file in PS saved in iphoto, (or at least thought I had?) and now it doe

  • Sending file attachments in SSIS only if rows returned

    I use this expression to send 8 email attachments from my DFT's. @[User::CranReport1] +  "|" + @[User::ElizReport1]   +  "|" +  @[User::PlfdReport1] + "|" + @[User::CranReport2] +  "|" + @[User::ElizReport2]  +  "|" +  @[User::PlfdReport2]  +  "|" +

  • Asign paragraph styles to xml nodes

    Hello all, I try to asign paragraph styles to xml nodes. I tried to autoasign the styles to tags and also to assign the styles directly to the xml tags with aid:pstyle. None of it with success. I think that this happens because there is a paragraph f

  • Error in code - points for sure

    can someone tell me why i am not getting output from the following code REPORT YTEST. TABLES: MARA,MARC,MARD,MBEW,MVKE,MAKT.   DATA: BEGIN OF I_MARC OCCURS 0,           MATNR LIKE MARC-MATNR,           EKGRP LIKE MARC-EKGRP,           PSTAT LIKE MARC