Files added to server take time to show for other users

Various users add files to server and other users with folder access cannot see files for sometimes up to 2 hours before the files appear. It is not a rights issues as when the file final appear in the directory they can access the file and use.

I saw this at a client's setup. Upgrading the client computer to 10.10.2 resolved this issue.
Bryan Dulock
ACN
Houston, TX

Similar Messages

Time Machine Permissions for other users

I just replaced my HD. Had no success with full system restore but eventually did a lot of drag and drop from time machine to my current account. I managed to get my photos, some mail docs, Itunes music those were the main items.
The problem is that I have two other users on the same computer whose accounts have the "red dash" on their folders indicating that their tm files are not accessible. Even when logging into their acccounts, they look the same.
What is the best way to get to those documents and restore them through drag and drop. I have no interest in reformatting and trying a full s;ystem restore at this point. Tried that a number of times and it didnt' work and I've put together most of what I had.
Any ideas or help will be appreciated.
mcneillclan3

It sounds like when you created the accounts on the new system, the UIDs (numbers that identify a user account) don't match up with what the old ones were on the TM backups. There is a way to fix it but it's kind of tricky.
Why did you have no success with the full system restore? Getting it working will likely be the easiest way to fix everything up.

Hot to disabled the "Block Diagram to show" for other users?

Hi,
I am doing a LabVIEW program that other persons may use.
I need them NOT to be able to access the "LabVIEW Block Diagram" (by doing e.g: Ctrl + E).
How can I do this?
Kind regards,
Amaloa S.

Hi Amaloa,
You could achieve this by:
- Click File (on your front panel) > VI Properties
- On the Category drop down list, click Protection
- Select Password-Protected
- Enter New Password and varify it again
Regards,
CLA | LabVIEW 7.1... 2013
www.renishaw.com

3 user profiles on mac book pro. cant see one account in time machine - has it backed up? and for other users ''no permission'' to open folders - i just want to know that stuff IS backed up (before attempting upgrade to lion)

We have 3 user profiles on mac book pro. want to upgrade to lion but want to be sure that all users are backed up to ext hard drive via Time Machine. When I go into Time Machine - I cant find anywhere my user account (1 of the 3) - loads of photos and documents. For other user accounts - if i go to open a folder i cant ''no permission'' is the message. All I want to be sure of is that there is a back up and for these 2 reasons I am far from sure.

famfran wrote:
When I go into Time Machine - I cant find anywhere my user account (1 of the 3) - loads of photos and documents.
Be sure they're not excluded in Time Machine Preferences > Options.
Also, if iPhoto is open while a backup is running, Time Machine may not be able to back up the changes in the iPhoto Library. It will "catch up" the next time, if it can.
For other user accounts - if i go to open a folder i cant ''no permission'' is the message. All I want to be sure of is that there is a back up and for these 2 reasons I am far from sure.
That's correct; one user, even an Admin user, doesn't normally have access to another user's files. You should see the same behavior if you try to look at their data on your Mac.
Log on as the other users (or have them do it) to see their backups.

I created a form with Single Choice fields, 4 days with times listed. But, I want the user to only be able to choose one time, and the time chosen to be unavailable for other users. How do I do this?

I created a form with Single Choice fields, 4 days with times listed. But, I want the user to only be able to choose one time, and the time chosen to be unavailable for other users. How do I do this? I have 4 blocks of Single Choice fields in order for the summary page to give me each day in the final report. But, I need the user to be able to make a selection of any day and time and that apointment to no longer be available to future users when they log in. Plus, when the user clicks on the time, they are unable to change their mind and choose another time. Here's the link if you want to see what I'm talking about: 2015-2016 Workload Apportionment Review

I'm afraid not. It's not rocket science but you need to do some coding.
You'll need to find a script (php) and save it to your local site folder. Then reference the script in your form's action attribute like so.
<form action="path/form-to-email-script.php" >
The input fields in your HTML form need to exactly match the script variables.
I'm assuming you're hosted on a Linux server which uses PHP code. Linux servers are also case sensitive, so upper case names are not the same as lower case names. It's usually best to use all lower case names in your form and script to avoid confusion.
Related Links:
Formm@ailer PHP from DB Masters
http://dbmasters.net/index.php?id=4
Tectite
http://www.tectite.com/formmailpage.php
If this is all a bit beyond your skill set, look at:
Wufoo.com (on-line form service)
http://wufoo.com/
Nancy O.

Account Number In Bank Account Transfer CM It Show For My User Only and Not

Hi,
Cash Management / Bank Account Transfers
when make transfer From Bank Account Transfer and Enter Of All The Required Data
And Search Bank Account Number It Show For My User Only And Not Show For Some Other Users
With The Knowledge That The same responsibility For My User and All Users In Cash Resp.
How to solve this problem ??
Thanks,
Mohamed Gamal
Edited by: Mohamed Gamal on May 12, 2011 11:12 AM

I bought MLB.tv premium through Apple TV however I was not provided with a user ID and password to be able to log in on to the computer to watch as I would if I bought directly from MLB.tv. Is this a scam? Anyone else have this issue.

Project Server 2010 - Different Schedule Dates for Different Users -- Same File

We have an issue regarding users viewing the same schedule, different machines.
The PMs have a schedule that was built in 2007 by the offshore team. We are running Project Server 2010 corporate, and they the PMs here on site have Project Professional 2010. Within the last couple of weeks, the PMs have noticed changes in
the dates.
When I open the schedule, I see the expected dates rendered in both PWA and Project Professional. Both draft and published versions are the same regardless of where the schedule is opened for editing. There are two PMs managing the schedules.
One sees what I see--the expected dates. The other sees differences in dates--months, in fact. Scheduled end date is 10/22/2013. When the second PM opens the schedule, he sees a scheduled end date of 2/17/2014.
I advised them that the offshore team needed to upgrade to 2010 due to the differences between 2007 and 2010. Additionally, and I could be wrong, having the server run in compability mode for so long (the upgrade was done in May 2013), is not ideal.
(Offshore team has since updated to 2010.)
Any thoughts on what could be causing this issue? Corrupt version of Professional? Settings askew?
Thank you,
L.D.

My bad, I didn't know that you were not using Project Server.
Then the file might be corrupted.
Try the
XML export and the
save for sharing method to repair it.
Hope this helps,
Guillaume Rouyre, MBA, MCP, MCTS |

Using an "iTunes Server" on a NAS drive for several users

Like many others I'm trying to make a single drive containing my iTunes media serve different iTunes users round the house.
Will the following work? Comments welcomed.
Currently my iTunes Media Folder and media live on my main PC. About 130Gb in total.
I'd like to get a NAS drive that has "iTunes Server" functionality and put this NAS drive on our home network. Then I'd like to move my iTunes media folder location into the 'iTunes Server' folder on the NAS drive. I'd also like to transfer all the data files associated with iTunes to the NAS drive. I believe with iTunes 10 that shouldn't be a problem and that I can contunue to use iTunes on my main PC as I ever did....it's just the media and data files will now all reside on the networked NAS.
Now I'd like to point all the iTunes on the other PCs in the house to the networked iTunes Media folder and the networked data files. Then presumably they will boot up and be able to access everything just like my main PC.
I understand that if more than one PC tries to edit the data files and iTunes media folder then corruption will inevitably result. I wondered if this could be prevented by using access rights management to all the networked iTunes files so that only my main PC can actually edit anything, add music, etc.
That way I hoped that I may manage the library successfully, create playlists as required and have all the other PC users enjoy my work but without screwing it up!
Maybe an iTunes data file can't be read by two instances of iTunes at the same time? Perhaps a second PC reading the data files can cause a corruption, if my main PC happens to be editing those files at the same time?
In essence I want all iTunes related files on the NAS drive. I want all PCs(with iTunes) in the house to have full read-only access to the music, playlists etc. However I would like my main PC to remain as the sole machine that administers the iTunes library and related files.
Looking forward to any help. Like others I've spent many hours trying to ascertain the best way to share a single iTunes media store around the house.
I know I could leave my main PC on and have the other PCs get at the content that way. However the power consumption of my desktop setup is not insignifcant and we will have a NAS drive running 24/7 anyway for other duties.
Hope that all makes sense.
Cheers
Geoff

I now realise that if what I propose will work then "iTunes server" is not required on the NAS. However if the iTunes Media Folder was placed in the "iTunes Server" on the NAS then other media players like the ROKU could access the files?
Geoff

NAT slooows over time (2 days) for http users. Proxy users OK.

We recently applied NW6 sp4 to a stable BM 3.7 server. Now internal
dynamic NATed http users experience a progressive slow down over about 2
days at which time browsing is functional but not usable. Proxy users
still get screamingly fast performance.

> How much traffic is going out via dynamic NAT?
>
> Have you tried using non-stateful http filter exceptions?
>
> BM37FP4A?
>
> Backrev NAT?
>
> Craig Johnson
> Novell Support Connection SysOp
> *** For a current patch list, tips, handy files and books on
> BorderManager, go to http://www.craigjconsulting.com ***
>
Problem appears to be resolved. I applied BM37FP4A and after 3 days NATed
HTTP connections are normal. Proxy performance is still very fast. I had
previously reapplied bm37sp3 which did not solve the problem.
FYI: About 1/2 of our 800 or so connections use dynamic NAT. We plan on
switching all users to proxy this week. Thanks Craig.

Slide show for PC users?

How do I burn a slide show to CD or DVD for PC users to view?
thanks

steven:
Welcome to the Apple Discussions. You can send the slideshow to iDVD and burn a DVD disk that can be played on PCs or thru TVs via a DVD player.
If the PCs have Quicktime installed you can export your slideshow to Quicktime movie and burn that to either a CD or DVD depending on the size of the file.
A third method would be to create a HTM gallery web page with the slides using the build in gallery mode in the Export window or the freeware Galerie. Then burn the folder to a CD. The PC users can open the index.html file on the browser and view the photos with their browser.
Do you Twango?
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.

Authentication prompt issue when opening an office file in a document library with read permission for domain users

An user as part of the domain users tries to open an office file from a document library but he got an authentication prompt asking him to authenticate. Domain users has only access to this library and not to the whole site. This uses to work in SharePoint
2007 without any problem but not in SharePoint 2013, we didn't have a workflow on SP2007.
Domain users has read access to only this document library in the site, but he shouldn't get an authentication prompt since he is part of the domain users and he is not trying to modify the document, he can open the document but gets two prompts, he can't
also see the list using explorer view since nothings appears using the explorer view.
Now, when opening the file, we can see..Updating Workflow Status, but we don't have any workflow working on this site or library, event any feature related to workflow.
If we go to the event viewer in the server, we find this information,
I also checked this thread but I couldn't find this scenario.
https://social.technet.microsoft.com/Forums/sharepoint/en-US/91bc770b-bb70-4885-a4ad-a243edb88753/event-id-8026-workflow-soap-getworkflowdataforitem-failed-doc-library-no-workflow?forum=sharepointgeneralprevious
I also created another list with the same permissions and using other office files but got the same behavior.
Now, we have migrated this site from SP2007 to SP2013.
Any ideas?

OK, I am going to throw out a lot of ideas here so hopefully they get you closer to a diagnosis. Hang on :)
Does it happen to work for some users but not others? If so, try logging in on the "good" computer with the "bad" username. This will tell you if the problem is related to the end-user's system. Also, once the user downloads a document
successfully can they open and work on it in Word? Also, does the document library have any custom content types associated with it or does it just use 'Document'?
I notice that there are other folks on the web that have run into this same problem and the similarity seems to be that they are either on SharePoint 2007 or have upgraded from 2007. Did this doc library start out as a 2007 library?
What you might want to do is this: Make a site collection from scratch in 2013 (or find one that you know was created in 2013). Choose team site (or whatever you want) for the root web and set up the security the same way you have it on the malfunctioning
library. Now, use windows explorer to copy and paste some of the documents to the new location. Be sure you recreate any needed content types. Now test it from the troubled user's computer.
I'm thinking there may be something that is different about the library since it was migrated through various versions and updates since 2007. I've sometimes found that there can be problems (especially with user profiles but that's a different story) with
things that go through this evolution.

500 Internal server error in web template for specific users

Hi We have issue with Web templates for some of the users giving error "500 internal Server Error", all other users able to run the same report.
We have authorization for the user and following variable which will give target currency selection in variable screen.
SAP BI Environment
BI Java : Release: 7 - Patch level: 0000000107 - Description: BI Web Applications Java - Additional info: - Production mode: true BI JAVA SPS : 7, Patch : 0
BI ABAP : Release: 701 - Patch level: 0007 - Description: SAP Business Warehouse (PBICLNT005) - Additional info: - Production mode: true
Java Virtual Machine : Java HotSpot(TM) 64-Bit Server VM - Sun Microsystems Inc. - 1.4.2_28-b03
Operating System : Windows 2003 - amd64 - 5.2
Error Message :
ERROR: Specify a value for variable Select Target Currency
ERROR: Specify a value for variable Select Target Currency
Root Cause :
The initial exception that caused the request to fail was:
com.sap.ip.bi.bics.dataaccess.resource.impl.bi.exceptions.BicsResourceBwRuntimeException:
at com.sap.ip.bi.bics.dataaccess.resource.impl.bi.selector.ProviderSelectionObject.initializeState(ProviderSelectionObject.java:932)
at com.sap.ip.bi.bics.dataaccess.resource.impl.bi.queryview.ProviderQueryView.initializeState(ProviderQueryView.java:109)
at com.sap.ip.bi.bics.dataaccess.resource.impl.bi.selector.ProviderSelectionObject.hasDefaultView(ProviderSelectionObject.java:1462)
at com.sap.ip.bi.bics.dataaccess.consumer.impl.selector.SelectionObject.initializeState(SelectionObject.java:516)
at com.sap.ip.bi.bics.dataaccess.consumer.impl.queryview.QueryView.initializeState(QueryView.java:198)
please let me know if any of you guys had this kind of problem.

SLD is not down its in active , I checked SLD url and Technical system also
Its in active , but when the problem is happend they done restart
but many times its happening every time restart is not preferrable ,upto that one is production system.
SLD is in active , but why the JCO'S ARE DISABLE under content Admin
where we can search the SLD user , we checked in SU01 but the user didn't exist there
If user is lock in the sense after the restart again it's working fine
I want to know the Root cause , why bcz it's simultaniously happend.
Regards,
SONY

Why responsibility is not show for my user?

Hi experts,
Recently i need to enable one responsibility(named as R below) for my user. As i examined, R is already assigned to the user but
it's expired, so i set the end date as null. Further more, i found that R itself has an expiration date and it has arrived, so i set it as null too.
Till now, i re-login my user and expect R shown on the left tree of home page. But it doesn't exist, really.
I guess there should be a concurrent request need be run but i can't figure this out. Appreciate your help.
Thanks,
ted

If you are on R12, please see (Concurrent Processing - Concurrent Program "Sync Responsibility Role Data Into The WF Table" errors: Cannot Find File affurg02.sql [ID 727534.1]).
R12 is the EBS version i am using. From the note 727534.1, this concurrent program is obsolete and replaced by "Workflow Directory Services User/Role Validation".
Please post the contents of the concurrent request log file here.Log for "Synchronize WF LOCAL tables"
Application Object Library: Version : 12.0.0
Copyright (c) 1979, 1999, Oracle Corporation. All rights reserved.
FNDWFLSC module: Synchronize WF LOCAL tables
Current system time is 09-SEP-2012 03:35:33
**Starts**09-SEP-2012 03:35:33
**Ends**09-SEP-2012 03:37:49
Start of log messages from FND_FILE
End of log messages from FND_FILE
Executing request completion options...
Output file size:
0
------------- 1) PRINT -------------
Disabling requested Output Post Processing. Nothing to process. The output of the request is zero byte.
Finished executing request completion options.
Concurrent request completed successfully
Current system time is 09-SEP-2012 03:37:51
Log for "Workflow Directory Services User/Role Validation"
Application Object Library: Version : 12.0.0
Copyright (c) 1979, 1999, Oracle Corporation. All rights reserved.
FNDWFDSURV module: Workflow Directory Services User/Role Validation
Current system time is 09-SEP-2012 03:36:03
**Starts**09-SEP-2012 03:36:04
**Ends**09-SEP-2012 03:36:31
ORA-08103: object no longer exists
Start of log messages from FND_FILE
End of log messages from FND_FILE
Executing request completion options...
Output file size:
0
Finished executing request completion options.
Concurrent request completed
Current system time is 09-SEP-2012 03:36:31
Thanks,
Ted

File Manager Pro.....Advice from other users please

I uploaded much of my music collection to Skydrive in anticipation of iPad ownership.
I planned to hold a small selection on the device and refresh/replace albums from Skydrive whilst on my travels using Hotel WiFi.
I have discovered that even using the "Skydrive App" one can only stream such media content, not download it.
Enter "File Manager Pro".
...This promised to be the answer to a maiden's prayer.
...alas, no.
Though I can now download music using the App, it remains imprisoned within the application, only being playable on the "One Shot" rudimentary in-built player.
Does anyone know of a way to transfer these music files to the iPad library where I could then access them from the iPad player?
Alternatively, is there some other way of downloading music from Skydrive directly to the iPad music library?

> Any other user please advice how do you transfer files
to your Server
> through
> FTP from dreamweaver?
All I've ever used is DW.
> i am doing, like Save to Remote Server, just saves the
page, not image.
> what do you do , if you can advice, instead of not
telling to to visit a
> link
> or help file or such, Just a Quick tip, shall help.
If you are seeing Save to Remote Server, then your site is
not properly
defined. It should be defined as an FTP site, NOT as an FTP
and RDS Server
site (unless you REALLY know what you are doing).
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"owaisrauf" <[email protected]> wrote in
message
news:ekg1ff$lql$[email protected]..
> Any other user please advice how do you transfer files
to your Server
> through
> FTP from dreamweaver?
> i am doing, like Save to Remote Server, just saves the
page, not image.
> what do you do , if you can advice, instead of not
telling to to visit a
> link
> or help file or such, Just a Quick tip, shall help.
>

Tables, views, packages, etc. not showing for most users

11.1.0.7
trying sqldeveloper 2.1.1 & 3.0.02 (64 bit)
jre 1.6
Started getting blanks this morning when expanding the nodes of most of my local users (cleared filters). Seeing no tables, views, packages. However, if I login sqlplus as that user and select * from tabs, I CAN see all tables are there.
I can use sqldeveloper to view all the SYSTEM user objects and one recent user that I imported (impdp) from a 10g database. However, every other user appears empty in sqldeveloper.
I grant connect, resource to all users since this is just a development database. Also tried granting CREATE SESSION and even ALL PRIVILEGES, no luck. All tried restarting.

self is also facing the same issue. workstation is install WINDOWS 7 Pro and 10g client is not available as of now for Windows 7 Pro so oracle client 11.2.0.1.0 installed. Database pertains to one datacenter is serving as desired but databases lying with remote data center, none of objects are shown even not as SYS also where as sqlplus is showing all objects. tried with TNS option and without TNS as well but objects not listed. don't understand the behavior of SQLDeveloper 2.1.1.64 Build-Main 64.45. for information all DBs are of 10.2.0.4 with mix flavour of non windows o/s.
Edited by: 824691 on Dec 30, 2010 10:33 PM

Files added to server take time to show for other users

Similar Messages

Maybe you are looking for