Files Copied during Client export/import??
Hi All,
Wat type of files get formed when perform client export/import??
Hello Abdul,
Please check the follwoing link:
http://help.sap.com/saphelp_nw04/helpdata/en/69/c24c824ba111d189750000e8322d00/content.htm
it will solve all your queries.
Basically 3 transport requests get created with different kinds of data in them. Each one of them when released will create a data file and a co file.
Please award points accordingly.
Regards.
Ruchit.
Similar Messages
-
Client Copy Using Client Export/Import
Hi Everyone,
This is regarding Client Copy Using Client Export/Import Method. We have two system Production and Development system. Iam planning to do a client copy from from PRD to DEV. I know most of the steps to perform Client Copy.I have some doubhts So if some one can please help me out i would really appreciate it.
!) I want to know which user should be used to perfrom Client Export ?
2) I want to know know which user to be used to perform Client delete?
3) Is there any particular USER who is recommended to perform Client Copy or any USER can do it?
4) After the Client Delete Procedure thorugh SCC5 ..to get back the client space we do Reorganization ? can anyone plzz tell me what are the tables that i need to reorganize or if anyone can provide me the steps for Reorganization i would be really thankful.
Waiting For your Replies
Best RegardsHi Mohammed,
1)I want to know which user should be used to perfrom Client Export ?
You can use your personal defined on the system UserID.
2) I want to know know which user to be used to perform Client delete?
Same as above, just make sure you have an account on the client and you log on to the right client
3) Is there any particular USER who is recommended to perform Client Copy or any USER can do it?
I am not aware that you should use a particular user. I have been doing copies/deletions with my UserID, as system administrator.
4) After the Client Delete Procedure thorugh SCC5 ..to get back the client space we do Reorganization ? can anyone plzz tell me what are the tables that i need to reorganize or if anyone can provide me the steps for Reorganization i would be really thankful.
Reorganization ( I personally) use SAPDBA tool. However -if you use ORACLE, there are other alternatives as well. What is your DB vendor? I will append more info in a bit.
Rgds,
Loukas -
HI SAP Gurus,
Please find the below details:
SAP NetWeaver 7.3
We have to copy all customized or developed BW objects like master data, DSO's , Infocubes , Reports etc.
We need only the design changes but not the data within the DSO or cubes that exist .
We have tried below procedure:
1) Taken export of DE1 source client 400 with profile SAP_CUST
2) Imported transports generated for above export into DE2 target client 350.
3) Executed transaction SCC3 and performed post processing, post processing was successful . Still we are not able to see DSO's, infocubes ,reports.
Please lets us know what we need to do to fulfill our requirement.
Thanks,
Avadhesh
+ 91 8095226536Hi Basis,
Please refer to below documentation on how to perform system copy in BI systems
How to System Copy in SAP Business Intelligence System Landscapes (NW2004)
Post processing steps for SAP BW system copy or db copy
BI systems has mostly cross client objects. So client copy with SAP_CUST profile will not serve your purpose.
Hope this helps.
Regards,
Deepak Kori -
O file not created during client export
Hi,
We are doing client copy via client export import.We used SAP_ALL client copy profile. We were expecting 3 files O,T and X . But we got only 2 files T and X. We checked at the OS level , and client copy logs SCC3. SCC3 shows only two transport request created and OS level has only 2 set of files.
Where is transport request O and its files?
Then we proceed and did the import in target client. But import error happened, it showed import stopped because of ztable were missing from nametab. how to proceed the import? Without solving the O file problem we cannot do the import ?
Thanks and Regards
Syam
Edited by: Syam on May 31, 2010 2:59 PMMark,
Thank you. Points provided.
Hi All,
Client copy completed.
The SAP_EXPA worked fine, and we got O files also as a result. But we did not follow that method because we did not want to affect the system availability and data consistency of the other clients in the same SAP instance. Hence O file import is not done. We transported the missing ztables to target system. We manually created the transport request using se03. Still we had problem while running scc7 after import. For this we used Note 1235955 after post processing
Thanks and Regards
Syam -
Differences between Remote Client copy and Client export and Import
Dear All, I am new to SAP. Please let me know the Differences between Remote Client copy and Client export and Import. Any response is greatly appreciated. Thanks a Million
Hello Mallikarjuna,
Follow the below note,
https://service.sap.com/sap/support/notes/552711
which describes the answer to question - Which is better or faster, a client transport or a remote copy?
Basically client transport would be preferred if the network connection between the source and target system is slow.
For more help,
http://help.sap.com/saphelp_nw70/helpdata/EN/69/c24c0f4ba111d189750000e8322d00/frameset.htm
Regards,
Debasis. -
Client copy using Client Export... Failed .. Need ur advice
Hi guiys how ru all doin...
I hope some one can help me oout in this issue.iam working on sap
4.6c, windows 2003 server, oracle9.2.0.
we need to take client copy from production client 300 to dev
server using client export method so I have performed client
copy using client export.these are the list of steps which i
performed but still am facing an error.
Checklists /prerequisites before doing client export :
Source client i.e. Client 300 should be locked for all users
except Administrator.
Ensure that NO Users are logged in both NCCSAPPRD and NCCSAPDEV
Server.
Inform Downtime to Users.
At least 2 background work process should be there.
Take Offline Backup of both Production server & Development
server.
Following Jobs rescheduled for next day for Client Export
Process:
1)Collector_for_performance_monitor
2)Customer_evaluati on_information
3)Error reporting
4)Eu_out
5)Vendor_evaluation_information
6)Leave_en titlement
Remove scheduled job from DB:
1)Check opt
2)Analyze tab
Lock all users except administrator
Change database mode from Archive to Non-Archive mode
Logon in NCCSAPPRD in Client 300 the one which is to be Exported
1.Enter Transaction SCC8
2.Select the copy profile and target system NCCSAPDEV Server and
other fields as necessary.
3.Click on "Execute in Background" button.
4.Click on the "Schedule job" button.
5.Verify that all information is correct and click on YES
button.
6.Click on continue at the "Info Client Export" window.
7.Specify the start time and click on SAVE.
8.Specify an output device at the "Background print parameters"
window and click on SAVE.
9.Click on OK at the information window.
Monitor the Client copy using transaction SCC3.
when am going to transaction scc3 in that ->All transport
requests ->Exports -> in that my source client 300 is there when
am double clicking it its showing me list of how many times
client export has been performed in that my date is also there
when iam double clicking it and going to details tab this is wat
the error which its giving....
Log file:
nccsapprd\sapmnt\trans\log\NCPET00968.NCP
Preparation for export
Transport request___: NCPKT00968
System______________: NCP
tp path : tp
Version and Release: 305..15 46D
Execution of the export pre-processing methods for request
NCPKT00968
Start:Sorting and compressing the object list
End:Sorting and compressing the object list
Start:Check for existence of inactive objects
End:Check for existence of inactive objects
End:Check for existence of inactive objects
End:Creating project information
Start:Writing nametab information for key entries
End:Writing nametab information for key entries
Start:Version creation of the objects of the request NCPKT00968
End:Version creation of the objects of the request NCPKT00968
Start:Adjusting the object directory for the objects of the
request NCPKT00968
End:Adapting the object directory for the objects of the request
NCPKT00968
Preparation for export
End date and time : 200708104758
Ended with return code: ===> 0 <===
Mainexport
Transport request___: NCPKT00968
System______________: NCP
tp path : tp
Version and Release: 305..15 46D
SQL error 1652 accessing GLFUNCA: ORA-01652: unable to extend
temp segment by 128 in
SQL error 1652 accessing PPOIX: ORA-01652: unable to extend temp
segment by 128 in
Incorrect export. Request is not imported.
Main export
End date and time : 20070810152923
Ended with return code: ===> 12 <===
This is the error which am getting in the transport log.
I tried to perform 4 times client copy. the first 2 times i got
the same error and the next 2 times it ended with return code
===> 4 <===.
Plzz anyone help me out in this issue as i need to perform it
again and this time i hope with ur help it should be
successful.
Waiting for ur replies
Best regardsThe problem you have is, that your TEMP tablespace is too small on the target system, you need to increase it.
Check Note 3155 - Termination due to tablespace overflow
Markus -
System copy using R3load ( Export / Import )
Hi,
We are testing System copy using R3load ( Export / Import ) using our production data.
Environment : 46C / Oracle.
while executing export, it takes more than 20 hours, for the data to get exported, we want to reduce the export time drastically. hence, we want to achieve it by scrutinizing the input parameters.
during export, there is a parameter by name splitting the *.STR and *.EXT files for R3load.
the default input for the above parameter is No, do not split STR and EXT files.
My question 1 : If we input yes instead of No and split the *.STR and *.EXT files, will the export time get reduced ?
My Question 2: If the answer is yes to Question 1, will the time reduced will be significant enough ? or how much percentage of time we can expect it to reduce, compare to a No Input.
Best Regards
L RaghunahthHi
The time of the export depends on the size of your database (and the size of your biggest tables) and your hardware capacity.
My question 1 : If we input yes instead of No and split the *.STR and *.EXT files, will the export time get reduced ?
In case you have a few very large tables, and you have multiple cpu's and a decent disk storage, then splitting might significantly reduce the export time.
My Question 2: If the answer is yes to Question 1, will the time reduced will be significant enough ? or how much percentage of time we can expect it to reduce, compare to a No Input.
As you did not tell us about your database size and hardware details there is no way to give you anything but very basic metrics. Did you specify a parallel degree at all, was your hardware idling for 20 hrs or fully loaded already?
20 hrs for a 100gb database is very slow. It is reasonable (rather fast in my opinion) for a 2tb database.
Best regards, Michael -
Client export/ import: tp finished with error 16
Hi folks,
I am facing an error while doing client import. I was planning for QA refresh, but ultimately decided to do a client export/import from production to QA. Export in production completed in 3 minutes, db size is around 100 gb. Created a new client in QA and while importing the tp finished with return code 16. When I compared the Z tables with PRD system, there were no entries in the Z tables copied to QA.
Can anyone suggest as what can be done for successful import or is there any alternative way to do this? This is required to be done asap.
Regards,
Sai R.Hi Sai,
I don't know what you did here, because I do have NEVER seen an client export of 100GB in 3 minutes ! => I expect, that more or less nothing got exported ...
Z-tables .... I do hope, that your QA System contains on these Z tables as well and you are only talking on the contents of the tables that you want to copy over ...
=> This works automatically if you use something like SAPALL profile or so (if the export is successful)
You should at least export export files of 5-10% of your client size => 5-10GB - otherwise you should check the export first ...
Regards
Volker Gueldenpfennig, consolut.gmbh
http://www.consolut.de - http://www.4soi.de - http://www.easymarketplace.de -
Difference between client Export/Import and a system refresh
Hi Experts,
I would like to know the diffrence between client Export/Import and System refresh.
Actually i have done client export from our production system and imported it into our quality system, I have asked our functional consultants whether the production data is now available in Quality. They replied me saying whole data of production system is available in Quality system as off date i have copied the export.
The size of the export was around 8GB, How can this have all the data of Production system which is around 600 GB.
In this way what is the use of System refresh which is done by database level ( changing the cntrl file etc... ), As i am getting all the data by doing Client Export/Import.
Thanks & Regards,
InjamuriHi,
What is system refresh when and why it is done?
The system refersh is nothing but the deletion of the client and replacing the data from other client. For example : you have clients 100, 200 and 300. Suppose when you want to refresh the client 100 you remove the client 100 and replace it with 200 0r 300 as per your reqiurement.
Mostly the refresh of clients will be happen at the time of development stage.
System Refresh is a simplified term to Client Copy. Client Copy means copying the production client on to the quality to test the real data. As recommend by SAP this need to carried out every 3 months.
The process to carry out the same is as follows:
1. Create a client on quality system using txn scc4
2. Create a RFC between Production system and Quality System (need to create on quality system)
3. Login to the newly created client using sap* and pass as a password
4. Txn sccl to start the client copy.
You can test the client copy by selecting the test run option. (test run will estimate the time taken for the activity).
Anil -
Error in Client export/import
Dear all
i have test system i would like to perform client export/import in single system correct if made a mistake
i have export client which create 3 request namely SIDKOxxxxxx , SIDKTxxxxxx,SIDKXxxxxx .i had selected target SID as system same sid bcaz i have only one system
then i login again with scc4 create new client and login in that sap* and pass then when i run command stms_import to import all three transport into that client as said my message server gets disconnected correct me i am wrong
or i have to directely run scc7 bcaz the request already in /usr/sap/trans then these error won't occur i have the back up of database
now i am getting error oracle disconnected
RegrardsDear Pavan
I tried last night as you said i made new client as 300 in ides and copy user profile to that
when i tried to configure stms by setting CTC =1 when i configure transport routes i don't find any client number
to provide source and target client
kindly send some screen shots if u have that would great support
.Delete the existing TMS configuration.
2.In 000 client by using the user ddic create TMS configuration using STMS.
3.Click on the system, in transport tool tab add a parameter CTC and set it to 1.
4.Now configure the transport routes, there you can find the client number in consolidation routes.
5.Provide your source and destination client and create routes.
Regards -
Hi...
I have completed client export and import sucessfully.i have follwed the procedure ..
by using scc8 i have taken client export...completed sucessfully..
And i was imported those request by using stms Extras->other request ->add request ...and the requests are imported sucessfully...
and at the time of postprocessing by using scc7 i got error related to tp..
everything is going fine, but one transaction code is hanged(strucke)... and that transaction is working properly in system where i was taken the export...
and one thing i want confirm , the issue is because of our client export import problem or it relates to functional problem
please give the suggestion..this is an urgent issue......Yip, I think you are in a bit of a fix here.
I only took a quick look (this is the security forum... and I could not see any initial security relevance...), but I did notice 2 things:
As suspected, there are a handfull of client independent tables involved.
Even if you do the import into a client of the same system, you might still face problems, because one of those tables has MANDT as a field.
I have no idea what the reasoning behind this is... but my guess is that you are experiencing that which the transaction is designed to do after a client copy => it hangs.
Sorry,
Julius -
System copy using SAPInst(Export Import database Independent prcoess failed
Hello ,
I am doing a System copy using SAPInst export/import process .
Source system : SAP Netweaver'04( BW 3.5 , Kernel : UC 640 ,Patch level 196 )
Export process fails at Phase 2 - Database Export at R3load jobs running 1,waiting 0 . Below is the log details
SAPSDIC.log
(EXP) INFO: entry for BAPICONTEN in DDNTT is newer than in DDNTT_CONV_UC: 20040211101817 > 20000621155733
(EXP) INFO: entry for BAPICONTENT255 in DDNTT is newer than in DDNTT_CONV_UC: 20040211101817 > 20031127161249
(EXP) INFO: entry for BAPICONVRS in DDNTT is newer than in DDNTT_CONV_UC: 20040211101817 > 20010131174038
(EXP) INFO: entry for BAPICREATORDATA in DDNTT is newer than in DDNTT_CONV_UC: 20040211101817 > 20000621155733
(EXP) INFO: entry for BAPICRMDH1 in DDNTT is newer than in DDNTT_CONV_UC: 20051229175654 > 20031211120714
(EXP) INFO: entry for BAPICRMDH2 in DDNTT is newer than in DDNTT_CONV_UC: 20051229175654 > 20031211120714
(EXP) INFO: entry for BAPICRMEXP in DDNTT is newer than in DDNTT_CONV_UC: 20051229175513 > 20031211120627
(EXP) INFO: entry for BAPICRMEXT in DDNTT is newer than in DDNTT_CONV_UC: 20051229175514 > 20031211120627
(EXP) INFO: entry for BAPICRMKEY in DDNTT is newer than in DDNTT_CONV_UC: 20051229175654 > 20031211120714
(EXP) INFO: entry for BAPICRMKEY_T in DDNTT is newer than in DDNTT_CONV_UC: 20051229175835 > 20031211120803
(EXP) INFO: entry for BAPICRMMSG in DDNTT is newer than in DDNTT_CONV_UC: 20051229175654 > 20031211120714
(EXP) INFO: entry for BAPICRMMSG_T in DDNTT is newer than in DDNTT_CONV_UC: 20051229175835 > 20031211120803
(EXP) INFO: entry for BAPICRMOBJ in DDNTT is newer than in DDNTT_CONV_UC: 20051229175514 > 20031211120628
(EXP) INFO: entry for BAPICRMPAREX_T in DDNTT is newer than in DDNTT_CONV_UC: 20051229175452 > 20031211120305
(EXP) INFO: limit reached, 5000 tables in DDNTT are newer than in DDNTT_CONV_UC
(EXP) INFO: NameTab check finished. Result=2 #20100113131216
(EXP) INFO: check for inactive NameTab entries: Ok.
(RSCP) INFO: I18N_NAMETAB_TIMESTAMPS not in env: checks are ON (Note 738858)
(DB) INFO: disconnected from DB
D:\usr\sap\B35\SYS\exe\run/R3load.exe: job finished with 1 error(s)
D:\usr\sap\B35\SYS\exe\run/R3load.exe: END OF LOG: 20100113131216
***SAPCLUST.log ****
(NT) Warn: EDIDOC: normal NameTab from 20040211095029 younger than alternate NameTab from 20000621155733!
(EXP) TABLE: "EDIDOC"
(NT) Warn: PCDCLS: normal NameTab from 20040211095029 younger than alternate NameTab from 20000621155733!
(EXP) TABLE: "PCDCLS"
(NT) Warn: SFHOA: normal NameTab from 20040211095029 younger than alternate NameTab from 20000621155733!
(EXP) TABLE: "SFHOA"
(NT) Warn: SFHYT: normal NameTab from 20040211095029 younger than alternate NameTab from 20000621155733!
(EXP) TABLE: "SFHYT"
(NT) Warn: UMG_TEST_C: normal NameTab from 20040211095029 younger than alternate NameTab from 20031113150115!
(EXP) TABLE: "UMG_TEST_C"
myCluster (55.22.Exp): 712: error when retrieving alternate nametab description for physical table UMG_TEST_F.
myCluster (55.22.Exp): 713: return code received from nametab is 32
myCluster (55.22.Exp): 299: error when retrieving physical nametab for table UMG_TEST_F.
(CNV) ERROR: data conversion failed. rc = 2
(RSCP) INFO: I18N_NAMETAB_TIMESTAMPS not in env: checks are ON (Note 738858)
(DB) INFO: disconnected from DB
D:\usr\sap\B35\SYS\exe\run/R3load.exe: job finished with 1 error(s)
D:\usr\sap\B35\SYS\exe\run/R3load.exe: END OF LOG: 2010011312563
Please suggest.
Thanks & Regards
GaneshIs your DB unicode? If so, did you select the unicode flag in sapinst?
This [thread|System Copy Error while exporting ABAP; might offer some help.
-Zach -
Can i do client export import between systems with different patch levels
we want to do a client export import between two systems. As I understand the patch levels should be the same in both for this to happen..
But right now I am in a situation where time is a big constrant. The basis patch level is on par. But the rest are not. Can I do client import successfully at this stage.The only thing that may stop it working could be additional functionality between the systems.
I work on XI and there is a huge difference between SP12 and SP15. We were able to do the transports between systems, but as Dev was patched before QA, and the transport was reliant on standard settings not being available, it still went though, but we had to transport it again after applying SP15 to QA.
Again, it probably depends on what System you have running on Netweaver... -
Client Copy error during client export / RX file is not getting
Hi Experts,
During the client export process of client copy in order to created two tranports requests(<SID>KT* and <SID>KX) for import we need to have the RT and RX files in data file folder and RT and RX in Co-file folder of usr\sap\trans. But I am getting all exceot RX which contains the client specific texts and forms. Hence I couldn't able to generated the second request <SID>KX.
In the transport log it is saying the package 'BCSC' doesn't exitst and some objects are not entered in the object directory.
Please advice me whether I can proceed the import with the available KT* request which conatinas client specific data and hence avoid the KX* request or please let me know whether there is any option to avoid this error while during a fresh export again.
Regards,
HarisHi Experts,
During the client export process of client copy in order to create two tranports requests(<SID>KT* and <SID>KX) for import we need to have the RT and RX files in data file folder and RT and RX in Co-file folder of usr\sap\trans. But I am getting all exceot RX which contains the client specific texts and forms. Hence I couldn't able to generated the second request <SID>KX.
In the transport log it is saying the package 'BCSC' doesn't exitst and some objects are not entered in the object directory.
Please advice me whether I can proceed the import with the available KT* request which conatinas client specific data and hence avoid the KX* request or please let me know whether there is any option to avoid this error while during a fresh export again.
Regards,
Haris -
Client Copy error during client export / RX file is not getting generated
Hi Experts,
During the client export process of client copy in order to created two tranports requests(<SID>KT* and <SID>KX) for import we need to have the RT and RX files in data file folder and RT and RX in Co-file folder of usr\sap\trans. But I am getting all exceot RX which contains the client specific texts and forms. Hence I couldn't able to generated the second request <SID>KX.
In the transport log it is saying the package 'BCSC' doesn't exitst and some objects are not entered in the object directory.
Please advice me whether I can proceed the import with the available KT* request which conatinas client specific data and hence avoid the KX* request or please let me know whether there is any option to avoid this error while during a fresh export again.
Regards,
HarisHi Experts,
During the client export process of client copy in order to create two tranports requests(<SID>KT* and <SID>KX) for import we need to have the RT and RX files in data file folder and RT and RX in Co-file folder of usr\sap\trans. But I am getting all exceot RX which contains the client specific texts and forms. Hence I couldn't able to generated the second request <SID>KX.
In the transport log it is saying the package 'BCSC' doesn't exitst and some objects are not entered in the object directory.
Please advice me whether I can proceed the import with the available KT* request which conatinas client specific data and hence avoid the KX* request or please let me know whether there is any option to avoid this error while during a fresh export again.
Regards,
Haris
Maybe you are looking for
-
I can't view pictures to attach to an email or upload to facebook it's just blank or shows an exclamation mark for each picture. I can see them in "recent" but if I double click on a picture to enlarge it it's just an exclamation mark again. What is
-
Hi, somebody knows how to edit a file that I created in corel draw 11 and I need to edit like PDF!!!! is so simple and nobody knows howwwwwwwwwwww!!!!
-
Adding text to 0MOVETYPE and 0MATMREA
Hi all, I'm working on adding text to infoobjects 0MOVETYPE and 0MATMREA, and have localized the tables in source system and created extractor for both tables. Filling 0MOVETYPE works fine, but 0MATMREA is a problem. The field "reason for movement" (
-
I have used the JAXB partial-unmarshal example to create my own code base for a >2gig XML file. Things are working well but I don't understand the issue of namespaceURI. Specifically, the XML file I am parsing contains namespace tags in its primary e
-
Hi All, I often work with images in Illustrator when creating adverts, I know it's not the best programme for this task but I love it and use it for almost everything these days. When working with CMYK document I import a beautiful bright image do th