Files I need to keep on the sys volume

I just noticed that the sys volume on my Netware 6.5 sp8 server is low on space.
so do I need to keep the support pack 8 folder, sys:\NW65sp8 ?
Also do I need sys:\system\backsp8 ?
thanks
Phil J

On 30.12.2014 21:46, PhilJannusch wrote:
>
> I just noticed that the sys volume on my Netware 6.5 sp8 server is low
> on space.
>
> so do I need to keep the support pack 8 folder, sys:\NW65sp8 ?
>
> Also do I need sys:\system\backsp8 ?
Both usually can be deleted without issue.
CU,
Massimo Rosen
Novell Knowledge Partner
No emails please!
http://www.cfc-it.de

Similar Messages

The verification lists my card data and address etc. correctly but I need to keep entering the card security number. Support keep telling me to delete and re-enter my car info which does not help. Anyone else seen this issue? Seems to be something to do

The verification lists my card data and address etc. correctly but I need to keep entering the card security number.
Support keep telling me to delete and re-enter my car info which does not help. Anyone else seen this issue?
Seems to be something to do with a new security check they have put in the system that does not work correctly and support is totally incapable of helping me out.
wth am i gonna do im feed up and on top i have no one to help me been calling itunes for days now im ****** off to the maxxx

I've been jumping through the hoops with Apple Support on this issue....first time I called they said I should try updating from IOS 4.0 to 4.1....tried that and the issue still persisted...then I called back to update the ticket and get the next steps...they said that the Bank is rejecting the request for verification and that is why it keeps prompting (which doesn't make sense since the confirmation seems to go through successfully). The rep also contacted the iTunes dept and had them run the verify manually and said the bank rejected it. The next hoop they want me to jump through is calling the bank to verify that the account is in good standing and inquire about the rejected requests. I'm fairly certain the bank account is in good standing....will verify of course....but I find it hard to believe that all the people who have posted here, plus countless others that are experiencing the same issue but haven't, are ALL having banking issues in the last 24hrs...I'm more convinced there is a disconnect on the back end between iTunes and Financial institutions...
I'm not sure I buy in to everything I was told...he also told me he has had several calls on this issue and they were all told to check with their banks. He could not verify that any of his past calls were resolved. Needless to say I'm not 100% believing everything he told me....weak response from Apple support on this issue so far.

Do I really need to keep all the preloaded apps that came with my MacbookPro 13'' mid 2010

Do I really need to keep all the preloaded apps that came with my MacbookPro 13'' mid 2010? Which one are necessary to keep from your experience. Thanks

Lots of apps are preloaded on a new MBP. Tell us which ones you don't think you need, and we'll tell you whether you can safely get rid of them.
However, the total space used on your hard drive by all the apps that are preinstalled is very small, and if there's any chance at all that you may eventually want to use them, you might as well keep them handy.
By way of example, my own Applications folder contains everything that came from the factory preinstalled in it, plus 2.5 years of subsequent additions totalling 196 applications of all kinds and sizes. Still, it only occupies 12.5GB of my 500GB hard drive.

Xmonad.hs file: I need a template, but the official one gives errors

I just installed Xmonad and I am LOVING it, but I need some help setting up an xmonad.hs file. I created one in ~/.xmonad/xmonad.hs and looked for a well-commented template since I don't know any Haskell (or any programming language, for that matter). This is the one I copied to the file:
http://www.haskell.org/haskellwiki/Xmon … _xmonad.hs
Which gives:
-- xmonad example config file.
-- A template showing all available configuration hooks,
-- and how to override the defaults in your own xmonad.hs conf file.
-- Normally, you'd only override those defaults you care about.
import XMonad
import System.Exit
import qualified XMonad.StackSet as W
import qualified Data.Map as M
-- The preferred terminal program, which is used in a binding below and by
-- certain contrib modules.
myTerminal = "xterm"
-- Width of the window border in pixels.
myBorderWidth = 1
-- modMask lets you specify which modkey you want to use. The default
-- is mod1Mask ("left alt"). You may also consider using mod3Mask
-- ("right alt"), which does not conflict with emacs keybindings. The
-- "windows key" is usually mod4Mask.
myModMask = mod1Mask
-- The mask for the numlock key. Numlock status is "masked" from the
-- current modifier status, so the keybindings will work with numlock on or
-- off. You may need to change this on some systems.
-- You can find the numlock modifier by running "xmodmap" and looking for a
-- modifier with Num_Lock bound to it:
-- > $ xmodmap | grep Num
-- > mod2 Num_Lock (0x4d)
-- Set numlockMask = 0 if you don't have a numlock key, or want to treat
-- numlock status separately.
myNumlockMask = mod2Mask
-- The default number of workspaces (virtual screens) and their names.
-- By default we use numeric strings, but any string may be used as a
-- workspace name. The number of workspaces is determined by the length
-- of this list.
-- A tagging example:
-- > workspaces = ["web", "irc", "code" ] ++ map show [4..9]
myWorkspaces = ["1","2","3","4","5","6","7","8","9"]
-- Border colors for unfocused and focused windows, respectively.
myNormalBorderColor = "#dddddd"
myFocusedBorderColor = "#ff0000"
-- Default offset of drawable screen boundaries from each physical
-- screen. Anything non-zero here will leave a gap of that many pixels
-- on the given edge, on the that screen. A useful gap at top of screen
-- for a menu bar (e.g. 15)
-- An example, to set a top gap on monitor 1, and a gap on the bottom of
-- monitor 2, you'd use a list of geometries like so:
-- > defaultGaps = [(18,0,0,0),(0,18,0,0)] -- 2 gaps on 2 monitors
-- Fields are: top, bottom, left, right.
myDefaultGaps = [(0,0,0,0)]
-- Key bindings. Add, modify or remove key bindings here.
myKeys conf@(XConfig {XMonad.modMask = modMask}) = M.fromList $
-- launch a terminal
[ ((modMask .|. shiftMask, xK_Return), spawn $ XMonad.terminal conf)
-- launch dmenu
, ((modMask, xK_p ), spawn "exe=`dmenu_path | dmenu` && eval \"exec $exe\"")
-- launch gmrun
, ((modMask .|. shiftMask, xK_p ), spawn "gmrun")
-- close focused window
, ((modMask .|. shiftMask, xK_c ), kill)
-- Rotate through the available layout algorithms
, ((modMask, xK_space ), sendMessage NextLayout)
-- Reset the layouts on the current workspace to default
, ((modMask .|. shiftMask, xK_space ), setLayout $ XMonad.layoutHook conf)
-- Resize viewed windows to the correct size
, ((modMask, xK_n ), refresh)
-- Move focus to the next window
, ((modMask, xK_Tab ), windows W.focusDown)
-- Move focus to the next window
, ((modMask, xK_j ), windows W.focusDown)
-- Move focus to the previous window
, ((modMask, xK_k ), windows W.focusUp )
-- Move focus to the master window
, ((modMask, xK_m ), windows W.focusMaster )
-- Swap the focused window and the master window
, ((modMask, xK_Return), windows W.swapMaster)
-- Swap the focused window with the next window
, ((modMask .|. shiftMask, xK_j ), windows W.swapDown )
-- Swap the focused window with the previous window
, ((modMask .|. shiftMask, xK_k ), windows W.swapUp )
-- Shrink the master area
, ((modMask, xK_h ), sendMessage Shrink)
-- Expand the master area
, ((modMask, xK_l ), sendMessage Expand)
-- Push window back into tiling
, ((modMask, xK_t ), withFocused $ windows . W.sink)
-- Increment the number of windows in the master area
, ((modMask , xK_comma ), sendMessage (IncMasterN 1))
-- Deincrement the number of windows in the master area
, ((modMask , xK_period), sendMessage (IncMasterN (-1)))
-- toggle the status bar gap
, ((modMask , xK_b ),
modifyGap (\i n -> let x = (XMonad.defaultGaps conf ++ repeat (0,0,0,0)) !! i
in if n == x then (0,0,0,0) else x))
-- Quit xmonad
, ((modMask .|. shiftMask, xK_q ), io (exitWith ExitSuccess))
-- Restart xmonad
, ((modMask , xK_q ),
broadcastMessage ReleaseResources >> restart "xmonad" True)
++
-- mod-[1..9], Switch to workspace N
-- mod-shift-[1..9], Move client to workspace N
[((m .|. modMask, k), windows $ f i)
| (i, k) <- zip (XMonad.workspaces conf) [xK_1 .. xK_9]
, (f, m) <- [(W.greedyView, 0), (W.shift, shiftMask)]]
++
-- mod-{w,e,r}, Switch to physical/Xinerama screens 1, 2, or 3
-- mod-shift-{w,e,r}, Move client to screen 1, 2, or 3
[((m .|. modMask, key), screenWorkspace sc >>= flip whenJust (windows . f))
| (key, sc) <- zip [xK_w, xK_e, xK_r] [0..]
, (f, m) <- [(W.view, 0), (W.shift, shiftMask)]]
-- Mouse bindings: default actions bound to mouse events
myMouseBindings (XConfig {XMonad.modMask = modMask}) = M.fromList $
-- mod-button1, Set the window to floating mode and move by dragging
[ ((modMask, button1), (\w -> focus w >> mouseMoveWindow w))
-- mod-button2, Raise the window to the top of the stack
, ((modMask, button2), (\w -> focus w >> windows W.swapMaster))
-- mod-button3, Set the window to floating mode and resize by dragging
, ((modMask, button3), (\w -> focus w >> mouseResizeWindow w))
-- you may also bind events to the mouse scroll wheel (button4 and button5)
-- Layouts:
-- You can specify and transform your layouts by modifying these values.
-- If you change layout bindings be sure to use 'mod-shift-space' after
-- restarting (with 'mod-q') to reset your layout state to the new
-- defaults, as xmonad preserves your old layout settings by default.
-- The available layouts. Note that each layout is separated by |||,
-- which denotes layout choice.
myLayout = tiled ||| Mirror tiled ||| Full
where
-- default tiling algorithm partitions the screen into two panes
tiled = Tall nmaster delta ratio
-- The default number of windows in the master pane
nmaster = 1
-- Default proportion of screen occupied by master pane
ratio = 1/2
-- Percent of screen to increment by when resizing panes
delta = 3/100
-- Window rules:
-- Execute arbitrary actions and WindowSet manipulations when managing
-- a new window. You can use this to, for example, always float a
-- particular program, or have a client always appear on a particular
-- workspace.
-- To find the property name associated with a program, use
-- > xprop | grep WM_CLASS
-- and click on the client you're interested in.
-- To match on the WM_NAME, you can use 'title' in the same way that
-- 'className' and 'resource' are used below.
myManageHook = composeAll
[ className =? "MPlayer" --> doFloat
, className =? "Gimp" --> doFloat
, resource =? "desktop_window" --> doIgnore
, resource =? "kdesktop" --> doIgnore ]
-- Whether focus follows the mouse pointer.
myFocusFollowsMouse :: Bool
myFocusFollowsMouse = True
-- Status bars and logging
-- Perform an arbitrary action on each internal state change or X event.
-- See the 'DynamicLog' extension for examples.
-- To emulate dwm's status bar
-- > logHook = dynamicLogDzen
myLogHook = return ()
-- Now run xmonad with all the defaults we set up.
-- Run xmonad with the settings you specify. No need to modify this.
main = xmonad defaults
-- A structure containing your configuration settings, overriding
-- fields in the default config. Any you don't override, will
-- use the defaults defined in xmonad/XMonad/Config.hs
-- No need to modify this.
defaults = defaultConfig {
-- simple stuff
terminal = myTerminal,
focusFollowsMouse = myFocusFollowsMouse,
borderWidth = myBorderWidth,
modMask = myModMask,
numlockMask = myNumlockMask,
workspaces = myWorkspaces,
normalBorderColor = myNormalBorderColor,
focusedBorderColor = myFocusedBorderColor,
defaultGaps = myDefaultGaps,
-- key bindings
keys = myKeys,
mouseBindings = myMouseBindings,
-- hooks, layouts
layoutHook = myLayout,
manageHook = myManageHook,
logHook = myLogHook
So I copied all this into my new xmonad.hs file and then restarted xmonad with mod+q, but a window popped up giving me this error:
Error detected while loading xmonad configuration file: /home/agi/.xmonad/xmonad.hs
on the commandline:
Warning: -no-recomp is deprecated: Use -fforce-recomp instead
xmonad.hs:141:10: Not in scope: `modifyGap'
xmonad.hs:141:38: Not in scope: `XMonad.defaultGaps'
xmonad.hs:273:8: Not in scope: `defaultGaps'
Please check the file for errors.
I'm not exactly sure what any of this means. If someone could help me decipher this or, better yet, post a better (well-commented so I can understand it) default xmonad.hs file that I can use, that would be great.

Alright! I've got xmonad almost set up! One major thing I still want to do is add some sort of pager-like display in the top left of xmobar. Just to show workspaces 1-9 and highlight the one I'm in (giving a preview of my windows or telling me which ones I have windows in would be great, but not absolutely necessary).
I can't find anything (that I understand) online. Help?
Here's my xmonad.hs:
import XMonad
import XMonad.Hooks.DynamicLog
import XMonad.Hooks.ManageDocks
import XMonad.Util.Run(spawnPipe)
import XMonad.Util.EZConfig(additionalKeys)
import System.IO
myManageHook = composeAll
[ className =? "Gimp" --> doFloat
main = do
xmproc <- spawnPipe "/path/to/xmobarbinary /home/jgoerzen/.xmobarrc"
-- make sure to edit paths to xmobar and .xmobarrc to match your system.
-- If xmobar is in your $PATH, with config ~/.xmobarrc you don't need the
-- xmobar path or config file, use: xmproc <- spawnPipe "xmobar"
xmonad $ defaultConfig
{ manageHook = manageDocks <+> manageHook defaultConfig
, layoutHook = avoidStruts $ layoutHook defaultConfig
, logHook = dynamicLogWithPP $ xmobarPP
{ ppOutput = hPutStrLn xmproc
, ppTitle = xmobarColor "green" "" . shorten 50
, modMask = mod1Mask
} `additionalKeys`
[ ((mod1Mask .|. shiftMask, xK_z), spawn "xscreensaver-command -lock")
, ((controlMask, xK_Print), spawn "scrot -s")
, ((0, xK_Print), spawn "scrot")
and here's my xmobarrc:
Config { font = "-Misc-Fixed-Bold-R-Normal--13-120-75-75-C-70-ISO8859-1"
, bgColor = "black"
, fgColor = "grey"
, position = TopW L 90
, commands = [ Run Cpu ["-L","3","-H","50","--normal","green","--high","red"] 10
, Run Memory ["-t","Mem: <usedratio>%"] 10
, Run Swap [] 10
, Run Date "%a %b %_d %l:%M" "date" 10
, Run StdinReader
, sepChar = "%"
, alignSep = "}{"
, template = "%StdinReader% }{ %cpu% | %memory% * %swap% <fc=#ee9a00>%date%</fc> |"

Why do I need to keep downloading the trial?

My download took 2 hours on my PC. Then the files include the .exe file and I have to download again...and again.

I have branched this out to a new discussion. Drjackie1 do you receive any type of error messages which are leading you to need to download the software again? Also what version of Windows are you using and what are you trying to download?

HT1391 Do I need to keep both the Itunes Media and Itunes Music folder in order for Itunes to work? It has eaten my hard drive up.

I have Itunes Music and Itunes Media folders that have almost the same gigs in them, the media is larger. Do I need both of these? I am left with 12 gigs of 500 gig hard drive and it is because of all the music I have. Can I get rid of one of these? And, if so how? I do not want to screw up my Itunes because I love it. Thanks!

Hello there, achangeagent.
The following Knowledge Base article provides great recommendations for the situation you find yourself in:
iTunes for Mac: Moving your iTunes Media folder
http://support.apple.com/kb/ht1449
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.

TS1630 people cannot hear me when they call me in my iphone, what is wrong? it's either I need to keep tapping the phone or they will not hear me

I am having difficulty with Iphone4. For two weeks now, when people call me or I call them, there are times that they cannot hear me. At times I need to tap the phone and it will work but most of the time it does not. What is the problem? Is this a major problem?

Hello arendss1,
Thank you for sharing your audio concern with your iPhone 4S! As your wireless provider, we want to make sure that you are able to get the maximum usage out of your device! I would like to partner with you so we can get this issue resolved once and for all! May I ask is there any physical or liquid damage on the device? Also, what software version do you have on the phone? Below are some steps to try to resolve the audio issues.
Turn off bluetooth and wifi in the Settings Menu.
Verify that the headset jack is clean.
Adjust the volume from the Settings menu. (Settings > Sounds > Ringer and Alerts)
Confirm that "Change with Buttons" is on.
Perform a soft reset by pressing & holding the home key & the sleep/wake key for 10 seconds.
Once you have tried these steps then please retest to see if the audio has returned to the device. I would also like to suggest test the device on speaker phone and with a wired earpiece as well. If the issue persist then please advise of any changes as all new information may prove to be beneficial in achieving a resolution.
Thank you...
ArnettH_VZW
Follow us on Twitter @VZWSupport

Can't download Photoshop 6 Extend version 13; Archive file missing, needs to be in the same folder

Any suggestions?

Direct download it here. Usually it's a Trial version and your serial number converts it to the Extended edition.
Download CS6 products
Gene

Frozen mouse- I need to keep unplugging the USB?

My wireless mighty mouse was giving me a terrible lag problem- so I switched it out for a wire USB Apple mouse.
The lag is gone but- I now get a frozen arrow several times an hour and the only solution is to unplug the mouse cable from the USB port (direct into Quad)
and re-seat it. Or I unplug an re-seat it from the extension cable.
I tried switching the USB port- but that does not help.
Before I run out and buy a new mouse- is there something that could be causing this?
Thanks.

OK I read through the help section.
I tried most of those.
I have a feeling it's the mouse because I was using an older Apple mouse (the one with the black center) and it worked flawlessly.
I just switched over to the newer, current mouse- (white center) and I have problems.
I'm not even sure why I switched- I wish I just kept the old mouse.

My iPod classic (late 2009) keeps turning the main volume up all of sudden

I've restored it, but didn't solve the problem. Btw, It's on firmware 2.0.4

Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

Need to restore using the created discs

Hello my name is Julie and I have a Satellite L505D-ES5026, and just recently notice that my Microsoft Works that came pre-installed with my laptop gives me a error message that reads: Microsoft Works cannot access one or more files it needs to run. The files may have been renamed, deleted, or moved. Try reinstalling Microsoft works and then start again. I tried systom restore nope. Then I in noticed its alot of my programs.
So How do I use the discs I created when the system was new?? And, yes Ive already backed up my files. Thank you
Julz
Solved!
Go to Solution.

Satellite L505D-ES5026 Specifications
Satellite L505D-ES5026 Downloads
Julz, keep the set of recovery disks for emergencies. Follow the instructions starting on page 62 of your User's Guide to run the Toshiba Recovery utility from its hard drive partition, and return your unit to its factory default out-of-the-box settings. Back up all your user files, music, etc, power off the unit, press and hold the '0' (zero) key while you power the laptop back on, keep holding the '0' key down until you see the Toshiba Recovery menu.
Please let us know what happens. Good luck.
Mike

Hard drive maintenance - deleting files not needed?

I noticed that everytime I download/install a itunes or ipod update, a new folder is created in
C:\WINDOWS\Downloaded Installations
Each folder contains some very large ipod/itunes related files. Do I need these after I've installed the updater? Can I delete them? Do I need to keep only the most recent? Or can I delete that, too?
dell latitude Windows XP

You can delete all of them. However, in order to use the 'repair' option in Add/Remove Programs in the event of an error, you may want to keep the latest version of the installers.

What files are needed for backup

Hello all,
Our database stopped working because of a mistake and we've lost lots of our control files and configuration files.
On the other hand there are 5 oracle_homes in our system! So we decided to uninstall Oracle and install a clean version and restore our data, tables, triggers, functions and ... to it.
We have many rman level 0 and 1 backups since 2 months ago and the size of each level 0 backup is around 1.8 GB.
But I am new to Oracle, so please let me know which files I need to keep from our current Oracle before uninstalling it and how I can restore backups to the new oracle (probably I will install it in a new drive not in D:/ again and with a new SID maybe). Also please let me know which version I should install? (Desktop Class or Server Class) We have some applications on our own laptops which connect to server and retrieve/insert data from/into oracle database on the server.
Our current database does not mount and open because of the problems I mentioned above.
Our server is: Windows Server 2008
Oracle Version: 11g
The scrips the we used to create rman backups are:
echo database backup, level 1
echo %DATE%
echo %TIME%
set datetimef=%date:~-4%_%date:~4,2%_%date:~7,2%_%time:~0,2%_%time:~3,2%_%time:~6,2%
echo %datetimef%
rman target / @F:\backup1.txt LOG F:\database-backup\rman-logs\%datetimef%.txt
copy F:\database-backup\rman-logs\%datetimef%.txt F:\database-backup\rman-logs\current-log.txt
and
echo database backup, level 0
echo %DATE%
echo %TIME%
set datetimef=%date:~-4%_%date:~4,2%_%date:~7,2%_%time:~0,2%_%time:~3,2%_%time:~6,2%
echo %datetimef%
rman target / @F:\backup0.txt LOG F:\database-backup\rman-logs\%datetimef%.txt
copy F:\database-backup\rman-logs\%datetimef%.txt F:\database-backup\rman-logs\current-log.txt
Thanks

RMAN's BACKUP command supports backing up the following types of files:
Database files, including datafiles, control files, and the server parameter file (SPFILE)
Archived redo logs
Other backups created by RMAN, including such as datafile and control file image copies, and backup sets containing SPFILEs, control files, datafiles and archived logs
Check
http://web.njit.edu/info/limpid/DOC/backup.102/b14192/bkup001.htm

Postoffice-startup-file not copied from SYS-volume

We migrated a Groupwise 7.02-postoffice from a Netware 6.5-Sp5-server to a
SLES10-SP1-server with the Novell GroupWise Migration Utility.
When we started gwpoa the postoffice-startup-file was not
in /opt/novell/groupwise/agenst/share/
We looked in the migration-logfile and we saw these messages
10/27/07 02:32:23 Configuring agent(s)...
10/27/07 02:32:23 Running remote command:
sh /tmp/groupwise/software/addagent.sh -
b /opt/novell/groupwise/agents/bin/gwpoa -
s /tmp/groupwise/software/p006.poa -h /var/opt/novell/groupwise/mail/p006 -
v 7
/tmp/groupwise/software/addagent.sh: line
135: /tmp/groupwise/software/p006.poa: No such file or directory
mv: cannot stat `/tmp/p006.poa.tmp.16849': No such file or
directory
cp: cannot stat `/tmp/groupwise/software/p006.poa': No such file
or directory
10/27/07 02:32:25 Remote command failed (1)
This is were our sourcefiles were:
Post Office:
Source database path: \\fileserver\VOL1\DATA\GRPWISE\P006\
Destination path: /var/opt/novell/groupwise/mail/p006
Agents:
Post Office Agent:
Path to startup file: \\fileserver\SYS\SYSTEM\p006.poa
As you see, our startup-file was on another volume then the postoffice.
In the migration-log we only saw a mount of the postoffice-volume, so we
think there is a bug in the migration utility. It does not copy the
startup-file if it is on another volume (in this case on the SYS-volume).
Or did we something wrong?
At last we solved our problem by copying (and editing) a startup-file
to /opt/novell/groupwise/agenst/share/
Regards,
Jeroen van der Klaauw

It happens between the full dbcopy and the incremental dbcopy, when the
agent is configured.
Jeroen van der Klaauw
> When the migration agent finishes the migration of the data there are
> the second and third phases that the application runs through - 2) to
> install the agents and 3) configure them. If you bombed out before
> that third phase then I would understand...
>
>
>
> On Mon, 29 Oct 2007 15:55:53 GMT, [email protected] wrote:
>
> >We migrated a Groupwise 7.02-postoffice from a Netware 6.5-Sp5-server
to a
> >SLES10-SP1-server with the Novell GroupWise Migration Utility.
> >When we started gwpoa the postoffice-startup-file was not
> >in /opt/novell/groupwise/agenst/share/
> >We looked in the migration-logfile and we saw these messages
> >
> >10/27/07 02:32:23 Configuring agent(s)...
> >10/27/07 02:32:23 Running remote command:
> >sh /tmp/groupwise/software/addagent.sh -
> >b /opt/novell/groupwise/agents/bin/gwpoa -
> >s /tmp/groupwise/software/p006.poa -
h /var/opt/novell/groupwise/mail/p006 -
> >v 7
> > /tmp/groupwise/software/addagent.sh: line
> >135: /tmp/groupwise/software/p006.poa: No such file or directory
> > mv: cannot stat `/tmp/p006.poa.tmp.16849': No such file or
> >directory
> > cp: cannot stat `/tmp/groupwise/software/p006.poa': No such file
> >or directory
> >10/27/07 02:32:25 Remote command failed (1)
> >
> >This is were our sourcefiles were:
> >
> >Post Office:
> > Source database path: \\fileserver\VOL1\DATA\GRPWISE\P006\
> > Destination path: /var/opt/novell/groupwise/mail/p006
> >
> >Agents:
> > Post Office Agent:
> > Path to startup file: \\fileserver\SYS\SYSTEM\p006.poa
> >
> >As you see, our startup-file was on another volume then the postoffice.
> >In the migration-log we only saw a mount of the postoffice-volume, so
we
> >think there is a bug in the migration utility. It does not copy the
> >startup-file if it is on another volume (in this case on the SYS-
volume).
> >Or did we something wrong?
> >
> >
> >At last we solved our problem by copying (and editing) a startup-file
> >to /opt/novell/groupwise/agenst/share/
> >
> >Regards,
> >
> >Jeroen van der Klaauw
> Tim
> ___________________
> Tim Heywood (SYSOP)
> NDS8
> Scotland
> (God's Country)
> www.nds8.co.uk
> ___________________
>
> In theory, practice and theory are the same
> In Practice, they are different

Need to Keep track of last prompted value

I have a requirement. I need to keep track the last prompted value.
Like, If we have run a report for '01-01-2013' date and 'Sony' Category. If the same report I will run in next time the report should run with those default value ('01-01-2013' date and 'Sony' Category). That means default value of a dashboard prompt should be the last prompted value.
Please tell me how to achieve the same.

Teach your users how to properly use "Saved Customizations": http://docs.oracle.com/cd/E23943_01/bi.1111/e10544/dashboards.htm#BIEUG395

Files I need to keep on the sys volume

Similar Messages

Maybe you are looking for