Files to copy when install BI apps (OBIA) 7.9.6.3 on Linux 64 Bit

So,
I've installed OBIA 7.9.6.3 on Windows XP and I've installed OBIEE 11.1.1.5 on Linux successfully. Does anyone know which files to copy over from Windows to Linux or any oracle docs that has this.
Thanks,
Gary

Here is the link to the documentation for this step:
http://download.oracle.com/docs/cd/E20490_01/bia.7963/e19038/windows_ic.htm#BABDCEGC
This part has changed from 10g to 11g now with WebLogic handling most of the setup.

Similar Messages

How can I change the install location when installing an App (i.e. Lightroom) from Creative Cloud?

How can I change the install location when installing an App (i.e. Lightroom) from Creative Cloud?

Rolfjuelg I am sorry but Lightroom does not support custom installation locations through the Creative Cloud. You can find more details at Lightroom and Creative Cloud FAQ.

Error opening file for writing when installing

I cannot install Flash on my Vista X64. I have tried running
the downloadable install and the online install. Any time I try to
run the install I get "error opening file for writing" when trying
to write C:\Windows\SysWOW64\Macromed\Flash\Flash9d.ocx.
I have uninstalled Fash first (it never worked anyway) and I
have rebooted. I even tried rebooting in Safe Mode but no matter
what I try, I cannot remove the existing Flash9d.ocx and installing
will not overwrite the existing file.
Even after uninstalling Flash and rebooting to safe mode,
Windows reports that flash9d.ocx is in use. So why is the file in
use after uninstalling?
Any help is appreciated.
Dale

Well, I finally figured out the problem with mine today. Of
course, I'd still like to know what nefarious purpose might be
involved with the Flash activeX file being loaded in memory even
after uninstall and reboot such that it cannot be removed from my
PC even in Safe Mode.
At least I got Flash working. I discovered that Flash was
disabled in IE.
In IE, go to Tools->Options->Programs and then Manage
Add-Ons. In my case, the ShockWave Flash Object was set to
disabled. I changed it to Enabled and I was able to install and use
Flash properly. Now I am just not sure I want to.
With the questionable practices of using the ActiveX control
even after uninstall, and making the file un-removable, along with
the extremely (in my opinion) dishonest practice of installing
Google Toolbar with Flash, I am hoping that Microsoft's Silverlight
puts Flash out of the market - and I'm no huge fan of Microsoft
either. With the new practices from Adobe, they are, in my opinion,
no better than any other spyware and malware purveyor on the market
- right up there with Napster and the dozens of follow-on products
that tricked users into installing unwanted software.

Firefox renames files to "copy" when downloading. We have such proplems with our internal site, other browsers have not such problems.

We have an internal site that containts some amount of files (*.doc, *.xls and others). Site is a windows IIS web-server. Files renames to "copy" when downloading, just "copy" name, without extension. Other browsers (Chrome, IE, Safari, Opera) do not have such problem.

We have an internal site that containts some amount of files (*.doc, *.xls and others). Site is a windows IIS web-server. Files renames to "copy" when downloading, just "copy" name, without extension. Other browsers (Chrome, IE, Safari, Opera) do not have such problem.

Shuffle playing position lost when installing an app

Since i very much value the shuffle mode (so i can listen to every song randomly without hearing it twice), i find it very important that the iPod Touch remembers it's playing position when paused, but whenever the device is turned off or connected to the PC, it loses it's shuffle playing position. For that i made amends by not turning it off anymore and buying a USB power adapter, since when charging the iPod Touch with the USB power adapter, it does remember the shuffle playing position.
But lately i noticed when i just played a few songs (from the +/- 1000 songs on my iPod Touch) in shuffle. So lets say it's on song 20 of 1027 songs, the next day when i resume playing it's suddenly on song 792 of 1027 songs (792 is an example, i've seen it go to 872, 370 and 588 as well, so it seems random), while it's still the same song which was on pause. I tried to figure out what i did on the iPod Touch which was causing the loss of playing position and found out that it happens everytime when i install an app from the App Store.
I've tried to turn off my iPod Touch as well as reset it, but both options didn't resolve the problem. Also i'm using a 1G iPod Touch.
Can more people here recreate this bug?

Anybody?

Why do files automatically copy when dragging?

I've just upgraded from Snow Leopard to Lion and now I find that when I drag files in the finder from one window or folder to another, just to move them, the files automatically copy instead of relocate. I'm dragging with the standard left click on the mouse, and no option key. This is leaving me with duplicate files all over the place. How can I stop this from happening?
thanks,
Jack

Sounds like something in Finder is mucked up.
Go to your Finder "Go" menu hold the option key to choose "Library"
Then go to Preferences trash these files:
com.apple.finder.plist
com.apple.sidebarlists.plist
Then, restart, or log out and in again.
(You will have to reset a few finder prefs the way you like them.)

Installing 11i apps on windows xp and Red Hat linux AS 3.0

Hi,
I am a newbie to Oracle E-business suite............i will be very helpful if anybody could help me with the full procedure on how to install Oracle apps on windows on Windows XP and Red Hat linux AS 3.0.........starting with configuring ip.....i would really appreciate if somebody helps me out...........well thanks in advance..waiting for a optmistic reply...
Thanks again,
Virendra

I have done installation on XP and 2000 servers are heres the steps... detailed ones. I also request those who install Oracle Apps 11i to first read the installtion pdf's which helps you understand clearly the prerequisites overall.
You cannot find the Pre installtion steps(such as Mks Toolkit and GNUMake config) in more clear terms from those documents.Which are explained here.
The Must PDF's to refer before installation
1)r1152ins.pdf
2)11iconcepts.pdf
According to the 11iconcepts PDF you can decide your business needs the N-Tier Architecture and Database Server and Application Tier Server File System in a very clear terms.
The installation process can be divided into
Pre Installtion,Installation and Post-Installation stages.
I would caution everyone to concentrate more on Pre Installation stage and which is more critical for a successfull installtion of Oracle Apps and to be free with later cropping up problems.
Further before moving into Installtion stages i have to Explain the Number of CD's and Installtion type's in Oracle App's.
In many places you may need to wait patiently even more than 10 minutes for screens(Dialog Boxes) to appear dont conclude prematurely some problem on system.
In oracle Apps 11.5.1 it consist of 12 CD's.
1) Start Here CD(RAPID Installation Wizard)
2)1-11 CD's
1-3 Application Top information
4th Oracle DB
5-6 IAS and other tools
7-11 Oracle Apps DB.
You have to decide whether you are going to do a Single Node Installation(No Post-Installation Task) or Multi Node Installation. Refer(r1152ins.pdf)
While installing for Multi Node you can see the Installation locations to be mentioned as
Appl_Top,Common_Top,Data_Top etc.Try to install Appl_top and common_Top in one drive and Data_Top in another Drive(Single Node) and in different nodes in Multi Node installation.
Installation Types
Production ==>Real time Env implementation's
Test ==>For test Env Purposes
Vision Demo==>R&D or learning Purposes.
Pre-Installation steps
======================
Space Requirement for types of installtions
Install VC++
How to Download and install MKS tool Kit
How to Download and Configure GNUMAKE
Env path setting
Create Applmgr user in Win2000
Space Requirement for types installtion:
Memory Requirement
1 GB of RAM(512 Fine for initial Installtion)
but planned for more user connections another 1 GB of Ram and according to the number of user's and Application needs you have to Increase the Memory.
HDD capacity
APP_Top(A)
COMMON_TOP(C)
DATA_TOP(D)
Test DB : 22 + 20 GB (60 GB recommended)
Prod DB : 22 + 20 GB (60 GB recommended)
Vision Demo DB: 22 + 35 GB (80 GB recommended).
Plus space for ur staging area.
This are the actuall space required for the Oracle Apps Alone plan for more space for future needs etc.
Softwares on System
Win2000 server with Patch1,Winzip and Acrobat Reader Latest version etc.
Install VC++:
Install a clean installtion of VC++ of Visual Studio Family 6.0
It should be first installed before installing MKS or GNUMAKE
NOTE: When Visual C++ is installed, let the installer register all environment variables. This will allow executables to be linked from the command line.
How to Download and install MKS tool Kit:
Note:Try to purchase the MKS tool kit from the below site.
or try to download the trial version valid for a months time.
http://www.mkssoftware.com/products/tk/ds_tkio.asp
Evaluation copy from
http://www.mkssoftware.com/eval/
Choose "MKS Toolkit for Interoperability " Download it in C:\
Again you have to click the downloaded kit to start the actual download of 38 MB of MKS tollkit Evaluation version.
You will be sent a Demo serial number to your mail id==>copy the same to a Notepad on your desktop.
Now start the installtion of the MKSToolkit on your system by clicking on the MKStoolkit downloaded.
It will prompt you for the Demo serial number which has to be provided.
The MKStoolkit will be successfully installed.
How to Download and Configure GNUMAKE:
1) HOW TO GET AND INSTALL GNUMAKE ON WINDOWS2000
This can be done by performing the following steps:
NOTE: Please, be aware that you must install Visual C++ BEFORE installing GNUMAKE, because its installation process involves linking executables.
1) Before downloading GNUMAKE, you will need to acquire some utilities which will be used for unpacking files. You can obtain the required utilities at the following
URL: ftp://ftp.gnu.org/gnu/windows/emacs/utilities/i386/
The directory contains the following files:
README
djtarnt.exe
gunzip-1.2.4-i386.exe
gzip-1.2.4-i386.exe
tar-1.11.2-i386.exe
tar-1.11.2a.exe
Only two of the files are required:
gunzip-1.2.4-i386.exe and tar-1.11.2a.exe
2) After downloading the above files, rename them as follows:
gunzip-1.2.4-i386.exe => gunzip.exe
tar-1.11.2a.exe => tar.exe
Place them into a directory that you can set in you PATH environment variable.
3) Point your browser to the following
URL: ftp://ftp.gnu.org/gnu/make
The files needed from this directory are:
make-3.77.tar.gz
make-3.78.1.tar.gz
make-3.79.1.tar.gz
make-3.79.tar.gz
Development requires to install version 3.77 or above. Downloading the latest version is perhaps best decision, but there are advantages to downloading the version required by development (3.77). (This document assumes that version 3.77 has been downloaded) (NOTE: AVOID USING SPACES IN
DIRECTORY AND FILE NAMES. GNUMAKE,VISUAL C++, ETC. DO NOT ALWAYS DEAL WELL WITH SPACES)
4) For instance, suppose you have downloaded file make-3.77.tar.gz on a directory called C:\GNUMAKE, unpack this file using gunzip.exe from a Command Prompt Window
Example: C:\GNUMAKE>gunzip make-3.77.tar.gz This last action, will expand file make-3.77.tar.gz and the extension .gz will be removed.
5) On the same Command Prompt Window, you should UnTAR the file, with the following
command: C:\GNUMAKE>tar -xvf make-3.77.tar This will create a new subdirectory called MAKE-3.77 under C:\GNUMAKE, the original directory.
6) In the new subdirectory, there is a batch file
called build_w32.bat; run the batch file to generate GNUMAKE.EXE
Try this from Command Prompt more than once if succesfully not built message appers till you get Generated successfully.
Note:If Possible run all the bat files in the MAKE-3.77 and also config.bat in the sub directory by double clicking it.
WARNING: There is a known issue with this last step, "GNU make fails to build regardless of chosing build_w32 or nmake"
See [NOTE:115937.1]
for work around. RELATED DOCUMENTS ----------------- For Microsoft Visual C++, MKS Toolkit and
GNUMAKE support, you should contact their respective vendors Microsoft Visual C++, MKS Toolkit
and GNUMAKE are registered trademarks.
http://support.microsoft.com/ http://msdn.microsoft.com/ http://www.mks.com/
http://www.gnu.org/ Note:104010.1: Release 11i on NT: Software Requirements
Note:115937.1: GNU Make won't make on windows NT
Important:All the downloaded files from GNU makes web sites shall be put in a single folder called gnumake under c:\ .Try to search for config.bat file inside this folders just click and
run it.
Env path setting:
Try to search make.exe generated in c:\program files\mkstoolkit\mksnt and copy and paste it
c:\gnumake\MAKE-3.77\windebug and c:\gnumake\MAKE-3.77\winRel also paste both this paths in the
My Computers==>Properties==>Advanced==>Environment variables==>Path setting's
After all this check as follows from CMD mode.
1)execute make at c:\>
2)execute gnumake at c:\>
In win2000 it may return error messages or Target wrong ignore it.If it is on Win NT then it will return proper status.
Create Applmgr user in Win2000:
Create a Applmgr user account in win2000 .
Installation:
=============
What here you require is the Patience .
Load the START HERE CD and run the C:\> cd \cdrom\rapidwiz
For Test and Prod it will ask for the location of Appl_Top,Common_Top and Data_Top location. Mention there path and ensure if more than one installtion say eg.Vision and Test or Prod to check the Path in all the tab pages its corresponding values and path's.
In Vision Demo many of the Options are not propmted from the user.
It will then do the system checking for Host Name and other details.All the checking should have been passed or if failed it will mark it in RED cross mark.Rectify the mistake and then onceagain proceed or else you will have problem after installation.
The Installation time takes around 5 to 6 Hrs of time.
For info on Post installation or on Multi Node follow the pdf's i have mentioned above.
The most tedious of all is succesfully crossing the Apps system checking it does for all
installed products it requires without any failure.
The GNUMAKE configuration or steps were nowhere given and it was all our trail and error exp.
This is possibly the most elaborate steps to install Apps on Win. post for further help. email me at [email protected] or [email protected]
Rajeev.

Installing Informatica powercenter 9.0.1HF2 client tools on Linux 64 bit

Hi all,
I'm building OBIA 7963 on Linux x86-64but server.
do we have Informatica powercenter client tools installables for Linux 64bit? if not please guide me how to proceed for this.
Thanks
Ram

Hi Ram
please follow the below procedure to install the informatica in LINUX
PowerCenter - Installation and Configuration (9.0.1 for OEL Linux 64Bit)
This article talk about the installation of PowerCenter from Informatica on:
•     Oracle Entreprise Linux 64 bit version 5 Update 5
•     Oracle Database 11gR2
After you complete the installation and configuration process, you have to log in to the Administrator tool to create and configure the following services:
•     PowerCenter Repository Service
•     PowerCenter Integration Service
Oracle Database
parameter
Set the open_cursors parameter to 1000
SQL> SHOW parameter open_cursor;
NAME TYPE VALUE
open_cursors integer 300
SQL> ALTER system SET open_cursors=1000;
System altered.
SQL> ALTER system SET open_cursors=1000 SCOPE=BOTH;
System altered.
SQL> SHOW parameter open_cursors;
NAME TYPE VALUE
open_cursors integer 1000
Repository Account
At least two database user accounts are required to host this repository :
•     POW_REP for the repository Database
•     POW_DOM from the domain Configuration Database
with the CONNECT, RESOURCE, and CREATE VIEW privileges.
For Oracle, you must perform the following instruction :
CREATE USER POW_REP IDENTIFIED BY POW_REP
DEFAULT tablespace users
TEMPORARY tablespace temp
quota unlimited ON users;
GRANT CONNECT, resource, CREATE VIEW TO POW_REP;
CREATE USER POW_DOM IDENTIFIED BY POW_DOM
DEFAULT tablespace users
TEMPORARY tablespace temp
quota unlimited ON users;
GRANT CONNECT, resource, CREATE VIEW, SELECT ANY dictionary TO POW_DOM;
The grant “select dictionary privilege” to the user POW_DOM is only needed to verify the parameter Open_Cursor during the prerequisite check.
Repository Tablespace
Set the storage size for the tablespace to a small number to prevent the repository from using an excessive amount of space.
Also verify that the default tablespace for the user that owns the repository tables is set to a small size. The following example shows how to set the recommended storage parameter for a tablespace named POWERCENTER_DAC.
ALTER TABLESPACE "POWERCENTER_DAC" DEFAULT STORAGE ( INITIAL 10K NEXT 10K MAXEXTENTS UNLIMITED
PCTINCREASE 50 );
Operating System
Login as root
Processor
Verify that the process match the software (x86_64)
[root@di-obia-01 ~]# uname -p
x86_64
[root@di-obia-01 ~]# uname -orv
2.6.18-194.el5 #1 SMP Mon Mar 29 22:10:29 EDT 2010 GNU/Linux
Temporary Disk Space Requirements
The installer writes temporary files to the hard disk. When the installation completes, the installer deletes the temporary files and releases the disk space.
Installer UNIX      1 GB
Informatica Services UNIX      2 GB
Verification of the temporary space with the df commando: Linux - disk free command (df)
[root@di-obia-01 ~]# df -h /tmp
Filesystem Size Used Avail Use% Mounted on
/dev/mapper/VolGroup00-LogVol00
77G 16G 58G 22% /
User Account
On UNIX, create a user account specifically to run the Informatica daemon.
[root@di-obia-01 ~]# /usr/sbin/useradd powercenter
[root@di-obia-01 ~]# id powercenter
uid=502(powercenter) gid=506(powercenter) groups=506(powercenter)
[root@di-obia-01 ~]# passwd powercenter
Changing password for user powercenter.
New UNIX password:
BAD PASSWORD: it is WAY too short
Retype new UNIX password:
passwd: all authentication tokens updated successfully.
Port
Verify that the port numbers are available on the machines where you install Informatica Services.
[root@di-obia-01 ~]# netstat -tulpn|grep 6005
The installer validates the port numbers that you specify to ensure that there will be no port conflicts in the domain.
Environment Variables
Use LANG and LC_ALL to set the UNIX code page for the installer.
File Descriptor
Informatica service processes can use a large number of files. Set the Linux - File Descriptor limit per process to 3000 or higher.
In the file /etc/security/limits.conf, add this line:
# PowerCenter
powercenter hard nofile 3001
powercenter soft nofile 2500
And verify with the ulimit function logged as the powercenter system user account:
[powercenter@di-obia-01 ~]$ ulimit -Hn
3001
Note:The limit is set to 3001 to prevent an error with the value 300 during the prerequisites check
Installation directory and Permission
As root, create the installation base directory:
mkdir -p /powercenter/9.0.1
chown -R powercenter:powercenter /powercenter
chown -R powercenter:powercenter /powercenter/9.0.1
chmod -R 775 /powercenter
chmod -R 775 /powercenter/9.0.1
As the installer (powercenter), copy the file to a tmp directory, unzip and untar it:
[powercenter@di-obia-01 powercenter901]$ unzip V26109-01.zip
Archive: V26109-01.zip
inflating: 901HF2_Server_Installer_linux-x64.tar
[powercenter@di-obia-01 powercenter901]$ tar -xf 901HF2_Server_Installer_linux-x64.tar
Change the permission of the file install.sh to execute
chmod -R 744 /tmp/powercenter901/install.sh
Server
Pre-Installation System Check
To verify whether a machine meets the system requirements for an Informatica installation, run the Pre-Installation System Check Tool (i9Pi) before you start the installation process.
You can find the i9Pi tool in the following directory: <InstallerExtractDirectory>/i9Pi
[powercenter@di-obia-01 i9Pi]$ ./i9Pi.bin
Preparing to install...
Extracting the JRE from the installer archive...
Unpacking the JRE...
Extracting the installation resources from the installer archive...
Configuring the installer for this system's environment...
Launching installer...
Enter the port 6004 to prevent a problem during the ckeck on the port 2010. The tool normally must verify until the port 6009 but check also the port 6010 which is the standard port for X Forwarding
A pdf is available in the tool directory if you want more information.
The report files are stored in the directory where you extract the Pre-Installation System Check tool files:
•     HTML format: <i9Pi Directory>/i9Pi/i9Pi_summary.html
•     Text format: <i9Pi Directory>/i9Pi_summary.log
i9Pi_summary.log
Output - Informatica9 Installation Location:/
Informatica starting port number:6004
Database Type:ORACLE
Database Hostname:di-rep-db
Database Port number:1521
Database Service name:direp.hotitem.local
Database User ID:POW_DOM
PASSED: OS Version Check: RHL Version Identified is 2.6.18-194.el5
PASSED: Diskspace: Available DiskSpace is 55105 MB
PASSED: Processors: Available Processors is 2
PASSED: Physical Memory: Available RAM Size is 4242 MB
PASSED: Temporary Space: Available temporary diskspace: 55105 MB. Sufficient for installation
PASSED: Socket Port: Socket port Range 6004-6009
PASSED: LANG Environment Variable: LANG Set to en_US.UTF-8 and LC_ALL Set to null
PASSED: JRE_HOME Environment Variable: JRE_HOME is not set
PASSED: File Descriptors : File descriptors limit is 3001
PASSED: Oracle Open Cursors: Open cursors in Oracle database is set to 1000Sufficient for install
PASSED : Resource privilege : The user account has the RESOURCE privilege.
PASSED: Create Table check : Successfully created a database table.
PASSED: Create View : Successfully created a database view.
Initial Server Software Installation
This sequence of installation don't say that you have to hit the next button and does not take care of review and informative windows.
[powercenter@di-obia-01 /]$ unset JRE_HOME
[powercenter@di-obia-01 /]$ /tmp/powercenter901/install.sh
OS detected is Linux
unjar task is in progress.............
You can wait a long time on this step ….
unjar of ESD completed.....
Do you want to continue installation (y/n) ?
y
Starting installation ...
\* Welcome to the Informatica 9.0.1 HotFix 2 Server Installer. *
To verify whether a machine meets the system requirements for an Informatica installation, run the
Pre-Installation System Check Tool (i9Pi) before you start the installation process. You can find the i9Pi
tool in the following directory: <InstallerExtractDirectory>/i9Pi
Before you continue, read the 9.0.1 HotFix 2 Installation Guide and Release Notes.
You can find the 9.0.1 HotFix 2 documentation in the Documentation Center at http://my.informatica.com
Configure the LANG and LC_ALL variables to generate appropriate code pages and
create and connect to repositories and Repository Services.
Do you want to continue? (Y/N)Y
Installer requires operating system Linux version 2.6 and later.
Current operating system Linux version 2.6.
Current operating system meets minimum requirements.
Select a choice :
1. Install Informatica 9.0.1 with Hot Fix 2 or Upgrade from a previous version of Informatica to
Informatica 9.0.1 with Hot Fix 2
2. Apply Informatica 9.0.1 Hot Fix 2 to existing 9.0.1 install.
Enter the choice(1 or 2):1
Checking for existing 9.0.1 HotFix 2 product installation.
Select (G)UI mode (needs X Window support) or (C)onsole mode (G/C):G
Launching installer in GUI mode ...
Preparing to install...
Extracting the JRE from the installer archive...
Unpacking the JRE...
Extracting the installation resources from the installer archive...
Configuring the installer for this system's environment...
Launching installer...
Preparing SILENT Mode Installation...
===============================================================================
Informatica 9.0.1 Services HotFix2 (created with InstallAnywhere)
Informatica 9.0.1 HotFix 2 Steps:
•     Installation Type: Install (and not upgrade)
•     Pre-requisites: Next
•     License and Directory. (Transfer the license file from the client zip file)
•     Pre-Installation Summary: Install (Required Disk Space 2815 MB)
•     Domain Creation: Create a domain
•     Configuration Database
with as JDBC parameters:
MaxPooledStatements=20;CatalogOptions=0;BatchPerformanceWorkaround=true
•     Domain Configuration
•     Port Configuration
•     Post-Installation Summary
Installation Status:: SUCCESS
The Informatica 9.0.1 HotFix 2 installation is complete.
For more information, see the debug log file:
/powercenter/Informatica/9.0.1/Informatica_9.0.1_Services_HotFix2.log
Informatica Administrator Home Page http://di-obia-01.hotitem.local:6007
Product Name : Informatica 9.0.1 HotFix 2
Installation Type : Fresh Installation
Installation Directory : /powercenter/Informatica/9.0.1
•     Login to the Administration console with the Administrator user (Administration/Administrator)
Repository Configuration
•     Start Informatica services. Start > All Programs > Informatica PowerCenter 8.6.1 > Services > Start Informatica Services.
•     Launch the Administration console. Start > All Programs > Informatica PowerCenter 8.6.1 > Services > PowerCenter Administration Console
•     Login with the account given in the configuration (admin/admin for this article).
•     Select configuration assistant (if you don't see it, you can also configure a repository with the configuration tool on the left side)
•     Welcome > Next
•     Enter a name for the repository, click on the configure button and fill in the fields. You must enter a connect identifier and not a connect string. The connect string for Oracle contains the credentials.
If the creation of the repository hang, try to give the DBA privileges to the oracle database account POW_REP
•     Integration service: fill a name in : INT_OBIA7961 and click next.
•     Character Data for Integration service: (Note: Character Encoding give the choice between ASCII and Unicode)
•     Finish !
A global administrator (for the domain and the repository) is automatically created during the installation with the credentials Administrator/Administrator. You may change the password for security purpose
Client
Installation Steps:
•     Double click on the file install.bat located in this directory : File1\pc861_client_win32_x86\
•     Choose Language. Next
•     Choose Install Option. Next
•     Prerequisites. Next
•     Installation directory For the path, you can leave the default value because it doesn't contain space C:\Informatica\PowerCenter8.6.1
•     Pre-installation summary. Next
•     Post-installation summary. Next
•     Installation Complete. Done
Hot Fix 10 installation:
•     file2>pc861_HotFix10_Client\install.bat
•     Select Language. Ok
•     Welcome. Next. Stop PowerCenter. Ok
•     Installation Prerequisites. Next
•     Installation Type: Apply. Next
•     Installation Directory. Next
•     Pre-installation summary. Next
•     Post-installation summary. Next
•     Installation Complete. Done
It will install :
•     PowerCenter - Client
o     PowerCenter - Designer
o     PowerCenter - Repository Manager
o     PowerCenter - Workflow Manager
o     PowerCenter - Workflow Monitor
o     PowerCenter Mapping Architect for Visio (Data Stencil?)
•     Custom Metadata Configurator
The metadata manager console is not installed as in the installation of the version 8.1.1.
Support
The creation of the repository hangs
The creation of the repository can take maximum 2 minutes.
If you don't see the creation of tables in the POW_REP schema:
•     close the browser,
•     connect again to the administation console and go through the configuration button in the left upper side
If it doesn't work
•     give the DBA privileges to the oracle database account POW_REP
•     and try to create it again
Thanks and Regards
Vidya Reddy

Where can the install.app file be found when installing Adobe Creative Suite CS5, download version ?

I have the same problem that the user who wrote the post "Trouble installing content files on Mac", but his post went unanswered. Here is the link: http://forums.adobe.com/message/4221280. I am trying to install the adobe creative suite CS5 downloaded from the internet, and what I have is a dmg file. When I open it, there is only a read me and a folder named "English". In the read me I go to the install instructions, and they tell me to double-click in Install.app, a file which doesn't exist. What am I doing wrong?

I downloaded it from Adobe Store. When I open the dmg file I see the read me.pdf and the English folder, nothing more. Perhaps the problem is that I have already installed the program in one computer, this is happening to me trying to install it in another one. Could that be it, that I need another license in order to make it work?

O365 firstrun suppression policy settings do not suppress file formats chooser when installed on EU locale computers

I am not sure where to report this but I believe I have found a bug in the latest Office 365 product. I set up a machine running windows 7, and implemented Office 2010 and Office 2013 group policies, I scoped the policies to the correct user and machine.
the particular policy I am interested in is the "default file format" found in the GPO under the save option for word, excel and powerpoint. under office 2010 this policy applies correctly and does not display the "choose a file format"
dialog box when those programs start, this is the behaviour I am looking for. I then installed Office 2013 and implemented the exact same group policy, the default file format dialog box does not appear. however, when I install Office 365 (2013 edition) the
dialog box does display. it appears that some other policies do apply correctly to the office 365 product but the default files format policy does not, office 365 is ignoring this policy setting.... hence why I believe this is a bug. according to the Microsoft
technical literature the Office 365 product and Office 2013 share the same group policy settings, I can not find any admx files specifically for office 365, only for office 2013 so 365 should recognise and use this policy setting.
Steve

ok, then to (possibly) help you, this is what I did in my initial testing to help prevent the running of some of those apps... up to you if you chose to implement this but it did seem to work for me in my test environment
Create a GPO which uses User GPP and Computer start up scripts. The GPP will remove the shortcuts and the start up scripts will install an ACT Database with AppHelp messages. These AppHelp messages
will disallow the application to run passing it off as a "compatibility" issue, and that's assuming the user can get to the exe file after the shortcut has gone.
Create a GPP Folder Options – File Type which re-associates the extensions for the blocked app with another application or removes the extension.
http://technet.microsoft.com/en-us/library/hh825139.aspx
http://technet.microsoft.com/en-us/library/cc749586(v=ws.10).aspx
http://technet.microsoft.com/en-us/library/cc749169(v=ws.10).aspx
any or all of those steps could form a solution as far as i can tell. I know this appears a pretty botch job but its the best I can think of, you could use app locker policies but personally I have never been a fan of implementing such restrictions (perhaps
it comes from the days where software restriction and hash rules and such seemed a pain in the wassit).
I don't mean to appear greedy when asking for help, but you have an even bigger rollout than Don has at the moment with O365, we both have a joint scenario which I wonder if you had come across and know the answer to, even though I've marked this as answered
it is the best we have at the moment but not 100% conclusive, would you have anything to add to it? the thread is located at
http://social.technet.microsoft.com/Forums/en-US/officesetupdeploy/thread/6a3b4fd6-1ad3-40a7-8b9e-e9cf815e115b
Many thanks
Steve

Dll file is missing on installing the app-v 5.0 sequenced application

HI All,
I have sequenced a application using AppV 5.0 Sequencer. During sequencing the application is fine, I gave the PVAD as C:\Program Files (x86).
After installation of the sequenced application, on launching the shorcut it throws error that
"The program cannot start because PBVM100.dll file is missing from your computer. Try re-installing the application".
I searched for that dll file, the weird thing is the dll file is present in the ProgramFiles(x86), but still i dont why the application was throwing such an error.
If I install the source it is fine, but if I install the sequenced application it throws error.
I even tried connection groups through SCCM 2012, it is still throwing the same error.
I am out of ideas. Can anyone help me on this issue.
Thanks in advance.

Hello Cody. I created a sequenced
Actuate 7 eSpreadsheet Designer 10.0.2 with Appv-5 Sp2. I published the package using the Powershell commands, but When I tested the app in this test machine the app never openned. The process eSpreadSheet.exe cosumed the 99% of the CPU and never
open the app. I performed a Devirtualization in another machine and it looks work properly, So I think it's a virtualization problem. Do you have any idea how to fix this?
Note: I created another sequence including all the DLLS detected in SystemX86 in the same directory where the exe file resides for this application C:\Program Files\Actuate7 as you suggested in the last entry but I'm still having the same problem.

Windows File Protection error when installing 9i client

While installing the 9i client I am getting a Windows file protection error message on all 5 of the test machines.
If I cancel out of the message the install finishes correctly and everything seems to function properly.
However, it is prety counterintuitive to have to cancel out of the message when we are wanting to do these installs in silent mode.
Anyone else have this problem, or any ideas on fixing?

nm, fixed it myself.
The Oracle install was replacing regsvr32.exe with an old version. When WFP detects a file protection problem, it first looks at the %systemroot%\system32\dllcache dir for a known good copy of the file to restore. If it doesn't find one in there, then it pops the dialog up and asks for a CD. If it does find one then it silently restores it in the background.
So, now at the beginning of my script I have a script checking the dllcache dir for regsvr32.exe, if it is there it moves on to the install, if it is not then it copies the one from their current system32 dir into the system32\dllcache dir. That way when Oracle replaces it WFP will silently restore their previous version.
-C

Old "Gallery" found in 808 when installing old app

I messed up my 808 when I installed an old version of Microsoft Apps, thought there was a good email program in it but when I was finished I found out my 808 looked like my old N8 without FP1, the Gallery for example was the old one and I could mark several pictures like before but icons for editing and more was messed up and got lots of errors...still this means the 808 contains old hidden programs....cant believe the old Gallery was copied into my 808 via Microsoft Apps 1.0....even after hard reset the old Gallery and much other things was way way old looking...that I take as it actually is possible to downgrade when not a total reset of factorysettings didnt helped me...soo, I made the decision to upgrade to FP2 when I had FP1 before...and then everything was ok again...and I have to say the FP2 was really good....found out the missing arrow keys for messaging actually are not missing..they just appear when needed and pressing on the text trying to put the marker where it needs to be...when doin that the arrow keys comes up as blue for 2-3 seconds...smart!
Was very very hard to find the alphanumerical keypad though...but atleast I have it now and it works good everyhting!
Even found some new updates in NokiaSuite for various functions in the 808...which have come after the FP2...
Gotta love Symbian Belle...please continue to refresh it with smaller updates now and then, dont kill it!

I would recommend to use the latest version of application server which is iAS6.5sp1MU2. Try this out and see if you run into any problems. Also please check the release notes available at docs.sun.com to check the compatibility.

My iPad mini ran out of battery when installing an app and now the app has gone?

I updated Quiz Up today while my iPad mini had 2% battery left! and I thought this would be enough but just as the update was installing my iPad ran out of battery so I immediately put it on charge! when my iPad turned on the app was still there but was darker and said 'waiting' underneath, so I then went to the App Store to continue to update but when I went to the updates section the update was gone, I them we to back to the apps location and the app had gone, so I went to reinstall it but it only said open next to it, and when I press this it does nothing, I would like the app back but I don't know how to get it back, any suggestions? I thought the all might be corrupt but I can't delete it and reinstall it because the icon has gone and it doesn't show up in spotlight, so what do it do?

Maybe:
http://lifehacker.com/5948155/fix-iphone-apps-stuck-waiting-during-installation
Otherwise try downloaing on computer and sync
The go to Settings>General>Usage>Storage and tap on the app and try deleting it.

Data1.cab file not extracted when installing Acrobat X on windows under VMWare Fusion 4.0

When extracting the files to the installation folder, the Data1.cab file is created but it is o kb value. Then when running the setup file, there is an error generated because the setup cannot see a valid data1.cab file

Manish_1988,
Thanks for the suggestion but after trying all of the suggestions, I still
did not have any success.
I ended up extracting the install files while I was in Oracle Virtual Box
then used the install files when I was in VMWare Fusion. A bit convoluted
but it worked.
Again, thanks anyway.
Greg Lewins

Files to copy when install BI apps (OBIA) 7.9.6.3 on Linux 64 Bit

Similar Messages

Maybe you are looking for