FileUpload.bsp in BSP application SBSPEXT_HTMLB

Hi,
On the layout of this page FileUpload.bsp there is an element like this:
<htmlb:fileUpload id = "<%= %_testSuite->seq_nr( )%>"
onUpload = "HandleUpload" />
Where can I find source code of "HandleUpload"?
Thanks,

Hi Pulau,
I repeat - there is sample code in the online documentation.
To quite directly from it...
If you want to read the uploaded file on the server, you do this in the
event handling phase in OnInputProcessing.
Cheers
Graham Robbo

Similar Messages

BSP Application does not launch in SAP R/3 4.7

Hi Experts,
We are trying to create a BSP application in SAP R/3 4.7. We are using the MVC architecture for the same. However, we are failing to launch the BSP pages. When the URL is launced either from SAP or directly in IE, the password prompt appears, after entering the user name and password it reappears again for 3 times and then throws a message invalid user name or password. This happens for all User Names. The passwords are correct though.
We have similar BSP Application in our SAP CRM 4.0 box and it works. I do not have much expertise in BSP, thus would want to know whether there are any BASIS settings that could be required in the system before we proceed. How do we know whether the system is compatible to BSP applications. We have even activated the BSP Application in SICF (Default_host -> SAP -> BC -> BSP -> SAP -> <BSP Application Name>). The current Support Pack version on the system are as follows,
SAP_BASIS Release 620 SAPKB62065; SAP_ABA Release 620 SAPKA62065.
Even if we try to launch the standard example BSP applications in the box, even they do not launch. The same problem appears. Do we need to make changes to User Roles level? All these user IDs have SAP ALL access though.
Please let me know how can I sort this out. Also let me know if you would need any further details.
Thanks for your help in advance.
Regards,
Subhrangsu

Hi Subbie,
in transaction SICF navigate to the service default_host->sap->public->ping. Right-click and select "Test Service". If this works then the BSP runtime is working okay.
Then navigate to the service sap->bc->bsp->sap->sbspext_htmlb and try the same there. On this service you will need to enter a username and password.
If all this works then you need to look clser at what you are doing.
Cheers
Graham Robbo

PDF from bsp application

Dear All,
I am new to this blog.
I currently working on BSP's. My requirement is like below.
In my company portal, when an employee logins to portal under ESS tab,
he can get Employee verification letter ( PDF ) from his manager under whom he is working. This PDF he can print and get the signature from his manager.
On first page he will have 3 questions ...
1) Whether you want base salary in letter ( PDF ) . answer: Yes or No radio button
2) Whether you want ssn number in letter ( PDF ) answer: Yes or No radio button
similarly third quesion.
When employee clicks on print preview button on the same page, then he will get PDF form with follwing matter:
Company Name,
addresses, Logo,
Mr XXXXXXX is our employee since. His SSN no.......
XYZZZZ
Hr Manager,
Pls let me know how to solve the above.
I got an RFC for my BSP for getting employee details. my question is how work on above in BSP.
Regards,
Kishan

Hi Sharmila ,
Thanks for reply.
I tried with smart form.
I created a smartform with only one text on smartform for just testing.
    i developed the BSP application . when i press the butten "printpreview' on first page it should open PDF page with out put of smart form.
the code is as below... but it is not working...it is not giving any result.. just remains in first page.
generated result: PDF format
data: l_pdf_xstring type xstring,
        lt_lines       type table of tline,
        ls_line        type tline,
        l_pdf_len      type i.
data: output_options      type ssfcompop,
        control_parameters type ssfctrlop,
        output_data         type ssfcrescl,
        devtype             type rspoptype.
data: lt_sys type table of mara.
DATA: cached_response TYPE REF TO if_http_response.
DATA: guid TYPE guid_32.
data : runtime type c.
DATA : display_url type string.
DATA: fileUpload TYPE REF TO CL_HTMLB_FILEUPLOAD.
control_parameters-langu = sy-langu.
control_parameters-no_dialog = 'X'.
control_parameters-getotf    = 'X'.
select * from mara into table lt_sys.
call function 'SSF_GET_DEVICE_TYPE'
    EXPORTING
      i_language             = sy-langu
    IMPORTING
      e_devtype              = devtype
    EXCEPTIONS
      no_language            = 1
      language_not_installed = 2
      no_devtype_found       = 3
      system_error           = 4
      others                 = 5.
set device type in output options
output_options-tdprinter = devtype.
CALL FUNCTION '/1BCDWB/SF00000010'
    EXPORTING
     CONTROL_PARAMETERS         = control_parameters
     OUTPUT_OPTIONS             = output_options
     USER_SETTINGS              = space
     ZTRNO                      = '5657'
   IMPORTING
     JOB_OUTPUT_INFO            = output_data
   EXCEPTIONS
     FORMATTING_ERROR           = 1
     INTERNAL_ERROR             = 2
     SEND_ERROR                 = 3
     USER_CANCELED              = 4
     OTHERS                     = 5
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
call function 'CONVERT_OTF'
    EXPORTING
      format                = 'PDF'
    IMPORTING
      bin_filesize          = l_pdf_len
      bin_file              = l_pdf_xstring
    TABLES
      OTF                   = OUTPUT_DATA-OTFDATA
      LINES                 = LT_LINES
    EXCEPTIONS
      err_max_linewidth     = 1
      err_format            = 2
      err_conv_not_possible = 3
      err_bad_otf           = 4
      others                = 5.
if sy-subrc EQ 0.
    CREATE OBJECT cached_response TYPE CL_HTTP_RESPONSE EXPORTING add_c_msg = 1.
    l_pdf_len = xstrlen( l_pdf_xstring ).
    cached_response->set_data( data   = l_pdf_xstring
                        length = l_pdf_len ).
    cached_response->set_header_field( name = if_http_header_fields=>content_type
                                       value = 'application/pdf' ).
    cached_response->set_status( code = 200 reason = 'OK' ).
    cached_response->server_cache_expire_rel( expires_rel = 180 ).
    CALL FUNCTION 'GUID_CREATE'
      IMPORTING
        ev_guid_32 = guid.
    CONCATENATE 'runtime->application_url' '/' guid '.pdf' INTO display_url.
    cl_http_server=>server_cache_upload( url      = display_url
                                         response = cached_response ).
ENDIF.
RETURN.

Using BAPI_DOCUMENT_CREATE2 from BSP Application

I am trying to add a document in DMS from a BSP application. The bapi_create_document2 works except that it will not upload a file from the client PC. The exact same code with the exact same parameters supplied works from within an ABAP program. I assume that this is because the web server is the presentation server in the BSP application and does not have access to the files on the PC.
I know that I can use the <htmlb:fileUpload> tag to move a file from the PC to the data object type ref to CL_HTMLB_FILEUPLOAD. The contents would then be in data->content. I am wondering if there is then some way to add the original file from the object using this BAPI or another one.

I can tell you what we did. When you use BAPI_DOCUMENT_CREATE2 you can specify a SAPFTP or SAPHTTP destination. These are RFC destinations where the sapftp or saphttp executable can be found. We setup an SAP gateway installation on each of our global content and cache servers. We then use the client IP address to determine the closest SAP Content server to the client. We use JavaScript (and the filesystem object - note your server must be in the trusted zone in IE for this to work) to copy the file from the client machine to the nearest Content Server. Then when we call the BAPI we specify the correct RFC Destination where the file is located and it is checked in correctly.
Now if you don't use the Content and Cache Servers and only want to upload into the R/3 database repository, then I would just use the fileUpload and write the file to a local directory on the server. Then point to the SAPFTP/SAPHTTP RFC that would have access on that server.

File Upload in BSP Applications and store in Application server

Hi we have requirement to store the attachments from BSP application into the external/internal storage space connected to application server.
I search for weblogs and all talking about <a href="http://help.sap.com/saphelp_me21sp2/helpdata/en/eb/8c683c8de8a969e10000000a114084/content.htm">File Upload in BSP Applications and store in MIME Repository</a>.
But our requirement is upload and store(no need to read the file content) attachments from BSP page into file server, and then make a link back in BSP page to open.
I know we can handle documnets in R/3 using DMS, but our system is SRM.
Please give a suggestion and solution.
Thanks,
Giri

Hi,
I faced a similar problem some time ago (uploading a file via BSP, storing it to the application server and then linking the archived document to a business object.
Here is the coding I used:
when 'SubmitUploadFile'. "OnInputProcessing
    DATA: data_fileupload TYPE REF TO CL_HTMLB_FILEUPLOAD,
          l_filename type string,
          l_archiv_doc_id type SAPB-SAPADOKID,
          l_content type string,
          l_file_ixos(100) type c value '/transfer/PV2/aus/IXOS/',
          l_file(200) type c,
          tbl_bin TYPE STANDARD TABLE OF tbl1024,
          wa_bin type TBL1024,
          l_xstring type xstring,
          l_arc_doc_id type SAPB-SAPADOKID,
          l_doctype type TOADD-DOC_TYPE,
          l_filename_e type DRAW-FILEP.
upload the file from the BSP web interface (e.g. file C:TempSUTestPDF_SU.pdf)
    data_fileupload ?= CL_HTMLB_MANAGER=>GET_DATA(
                                       request = runtime->server->request
                                       name    = 'fileUpload'
                                       id      = InputFieldFileUpload
    IF NOT data_fileupload IS INITIAL.
      l_filename         = data_fileupload->file_name.
      l_content      = data_fileupload->file_content.
      l_content_type = data_fileupload->file_content_type.
    ENDIF.
The uploaded file is returned as XSTRING, so we have to convert it to BINARY
(or STRING alternatively)!
    l_xstring = l_content.
    CALL FUNCTION 'SCMS_XSTRING_TO_BINARY'
      EXPORTING
        BUFFER          = l_xstring
        APPEND_TO_TABLE = 'X'
      TABLES
        BINARY_TAB      = tbl_bin.
split path for storing the file to the application server
    l_filename_c = l_filename.
    CALL FUNCTION 'CV120_SPLIT_PATH'
      EXPORTING
        PF_PATH = l_filename_c
      IMPORTING
        PFX_FILE = l_filename_e.
write the uploaded file to the application server
    l_filename = l_filename_e.
    concatenate l_file_ixos l_filename into l_file.
    open dataset l_file for output IN LEGACY BINARY MODE.
    loop at tbl_bin into wa_bin.
      transfer wa_bin-line to l_file.
    endloop.
    close dataset l_file.
store the uploaded file on the IXOS-archive
    l_doctype = l_content_type.
    CALL FUNCTION 'ARCHIVOBJECT_CREATE_FILE'
      EXPORTING
        ARCHIV_ID                = '2T'
        DOCUMENT_TYPE            = l_doctype
        PATH                     = l_file_arc
      IMPORTING
        ARCHIV_DOC_ID            = l_arc_doc_id
      EXCEPTIONS
        ERROR_ARCHIV             = 1
        ERROR_COMMUNICATIONTABLE = 2
        ERROR_UPLOAD             = 3
        ERROR_KERNEL             = 4
        OTHERS                   = 5.
link the archived document to the business object DRAW
    CALL FUNCTION 'ARCHIV_CONNECTION_INSERT'
      EXPORTING
        ARCHIV_ID                   = '2T'
        ARC_DOC_ID                  = l_arc_doc_id
        AR_OBJECT                   = 'DRW'
        OBJECT_ID                   = g_object_id_arc
        SAP_OBJECT                  = 'DRAW'
       DOC_TYPE                    = l_extend
     EXCEPTIONS
       ERROR_CONNECTIONTABLE       = 1
       OTHERS                      = 2.
Remark: It´s vital to convert the uploaded file from XSTRING to BINARY. Otherwise the file cannot be stored/archived properly.
The archived document can then be displayed by inserting the (IXOS-web client-)link to the BSP page (e.g. http://193.228.208.78:4060/archive.dll/get?arc=2T&doc=44439F1B4F701E65E1000000C1E4D00A).
Hope this helps!
Regards,
Ulli

Problem with My First BSP Application

Hi
I have developed my BSP Application using the tutorial at http://help.sap.com/saphelp_nw04/helpdata/en/c8/101c3a1cf1c54be10000000a114084/frameset.htm
I created a Package, a BSP application and htm page.
I copied the code and activated both the BSP App and the page.
When i execute i get the following on the browser.
The page cannot be displayed
The page you are looking for is currently unavailable. The Web site might be experiencing technical difficulties, or you may need to adjust your browser settings
What is the problem
Sharath

Hi,
In order to see if the service is activated simply right click on it in SICF. There you will see whether or not the service is activated. Additionaly when you are activating the services from the OSS note you will see 2 YES buttons. Be sure to click the one on the right. Its the one with the little arrow and folder picture on it. Clicking this button will also activate the sub nodes.
Your BSP will be in the following path:
default_host/sap/bc/bsp/sap/yourbspname
Although you shouldn't have to activate it in SICF if its properly activated via SE80 and all the system services listed below are active.
Here are the BSP services that must be activated:
/default_host/sap/bc/bsp/sap
/default_host/sap/bc/bsp/sap/system
/default_host/sap/bc/bsp/sap/public/bc
/default_host/sap/public/bc
/default_host/sap/public/bc/ur
/default_host/sap/public/bsp/sap/public
/default_host/sap/public/bsp/sap/public/bc
/default_host/sap/public/bsp/sap/system
/default_host/sap/public/bsp/sap/htmlb
/default_host/sap/bc/bsp/sap/it00
/default_host/sap/bc/bsp/sap/sbspext_htmlb
/default_host/sap/bc/bsp/sap/sbspext_xhtmlb
/default_host/sap/bc/bsp/sap/htmlb_samples
Like I said make sure you click on the right hand side YES button to ensure all the sub node get activated as well.
It is not enough to just activate your BSP application node. All parents should be activated also. Doesn't hurt thats for sure
Let me know if this helps
Cheers,
Rich

Error in using PERFORM in eventhandler in a BSP Application.

Hi All,
Can we use Subroutines in BSP applications?
If yes then please help me with syntax .
Best Regards,
Anubhav.
Edited by: Anubhav Jain on Dec 20, 2007 10:52 PM

You can call subroutine with below Synatx:
DATA: progname(20) TYPE C VALUE 'YTESTINCLUDE' .
PERFORM your_perform_name IN PROGRAM (progname) IF FOUND.
"where your_perform_name is the form within the include program YTESTINCLUDE[/code]
Raja T
Edited by: Raja Thangamani on Dec 20, 2007 4:58 PM

Error message in bsp application

hi
Im tamil selvan .....this is my first bsp application i created .. but i cant view the output..the default html code itself not executing... i copied the same code in text and saved in html its executing there... i dont know what is the issue..is any system files are missing...plz guide me im new to bsp....first what should i learn ... the below is the error i pasted...
Business Server Page (BSP) error
What happened?
Calling the BSP page was terminated due to an error.
SAP Note
The following error text was processed in the system:
Die URL enthält keine vollständige Domainangabe (isys-ecc statt isys-ecc.).
Exception Class CX_FQDN
Error Name
Program CX_FQDN=======================CP
Include CX_FQDN=======================CM002
ABAP Class CX_FQDN
Method CHECK
Line 10
Long text -
Error type: Exception
Your SAP Business Server Pages Team

Hi Tamil,
welcome to the SAP Community Network. You will find lots of great resources, tips, and examples here.
Of course to find them you have to look for them. You will find most people more than happy to help you with problems if you first try and help yourself by searching for the solution yourself.
So please, search the forums for the solution to your problem before you post.
Cheers
Graham Robbo

SSO via Windows authentication for a BSP application

Hi,
is it possible to configure/implement a bsp-application, so that the user of the application is authenticated in the SAP system through the windows user (without entering the user or password). I search for a mechanism, that is like the SSO mechanism in the SAP EP. We don't have SAP EP, neither we have a java stack installation.
Exists a way to implement this scenario?
My idea was it, to use the same functionality, like in the SAP GUI, when configuring SSO. Unfortunately I don't find any hints about this topic.
Regards,
Thomas

One best way is to embed the BSP page in the iview of the EP. As your are telling EP is not available i think there is no other way around.

Javascript error calling a bi 7.0 webapplication from a bsp application

Hi everyone,
This is the scenario we're facing a javascript error :
Enterprise Portal is calling a custom bsp application ( via an iview in the enterprise portal ) in the bi system with a parameter "template_id" and a value, which is the technical name of a bi web application.
The bsp application is evaluating the parameter by some custom code and creating a html page with a redirect or a maintenance message to the bi web application passed with the parameter "template_id".
The html link to the bi web application is created according to this documentation :
http://help.sap.com/saphelp_nw70ehp1/helpdata/en/46/03d4ac801467e6e10000000a1553f6/content.htm
Purpose of the bsp application :
in the bi system there is a database table to maintain a flag for each webtemplate and infocube, which should not be called via the enterprise portal for a certain time ( some kind of maintenance switch ). The bsp application then decides to show a maintenance page for the called webtemplate or to send the redirect page to the client.
The process described above is :
working with the bi 7.01 sp7 in the bi ( enterprise portal sp22 ) in the productive system.
working in the Q&A system bi 7.01 sp8 with bi 3.5 web applications.
not working in the Q&A system bi 7.01 sp8 with bi 7.0 web applications.
The javascript error calling bi 7.0 web applications is :
Webpage error details
User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 6.1; Win64; x64; Trident/4.0; .NET CLR 2.0.50727; SLCC2; .NET4.0C; .NET4.0E)
Timestamp: Mon, 6 Jun 2011 09:11:04 UTC
Message: Object doesn't support this property or method
Line: 96
Char: 11
Code: 0
URI: https://mlptb1.mlp-ag.com:58001/irj/servlet/prt/portal/prtroot/pcd!3aportal_content!2fcom.sap.pct!2fplatform_add_ons!2fcom.sap.ip.bi!2fiViews!2fcom.sap.ip.bi.bex?TEMPLATE=B_221_002_KUNDEN_POSTEN_AD
We've opened a message. Support center is saying that this method isn't supported by sap. We should ommit the bsp application and the used functionality.
Is there any way to find out, what is causing this object is missing ?
Is there another way than a bsp application to use this custom maintenance function in the described system setup ?
system components :
production system
SAP NetWeaver 7.0 Portal SP22
SAP BI 7.01 SP 7
q&a system
SAP NetWeaver 7.0 Portal SP22
SAP BI 7.01 SP 8
Kind regards.
Dirk

Hello everyone,
we did some further analysis on this problem und we think we found the problem.
The error occurs while trying to execute the standard url for web templates inside a Enterprise Portal Frame, for example
https://XXX:XXX/irj/servlet/prt/portal/prtroot/pcd!3aportal_content!2fcom.sap.pct!2fplatform_add_ons!2fcom.sap.ip.bi!2fiViews!2fcom.sap.ip.bi.bex?TEMPLATE=XXX
While executing the URL a HTML-Page with some embeded Javascript-code is sent back to the browser.
In this Javascrip-Code, the method-call "dsmObj.registerAll" leads to a script error in Internet Explorer.
dsmObj.registerAll("pcd:portal_content/com.sap.pct/platform_add_ons/com.sap.ip.bi/iViews/com.sap.ip.bi.bex", "GUSID:6FC9SuhGDPIMMLwOdeHEIg--_7WQud13yeLJDz2kYoQFSg--", "1307605928212");
In SP7, the method "dsmObj.registerFullKey" is called instead of "dsmObj.registerAll". This has changed in SP8.
dsmObj.registerFullKey("GUSID:iBPvyska9*xE_JBalkQG2g--YyKv2C3NToP0I79Mw7EO8w--", "1307606479963");
The object "dsmObj" seems to reference the parent frame of the Enterprise Portal.
Has anyone seen this before? Any ideas how we can fix this?
Kind regards,
Matthias
Edited by: Matthias Keller on Jun 9, 2011 2:07 PM

Custom F4 help in a BSP application working in Mozilla but not in IE

Hi,
I have created a custom F4 help in a BSP application.
It is working in Mozilla but not in IE. I tried enabling javascript as well but still it is not working.
Can someone please suggest a possible solution for this?

Hi,
See simmilar discussion in thread /thread/1883519 [original link is broken]
I think this may be helpful for you.
Thanks,
Chandra

How to set up use of relative URLs for a BSP application

Dear all,
I need to access a BSP application through our external portal.
This is failing because generated URLs are absolute URLs (they mention physical server name, not known of course on the internet) where they should be relative URLs (they use external portal URL as prefix).
How to set this up?
I'm logged on http://myportal.com/irj/portal and want to call a BSP application. To build this page, my internet client (Internet Explorer) tries to get elements from the server. Looking at HTTP trace, I can see that my IE is trying to reach the physical server, not known on internet of course, then page loading fails.
Ex absolute URL : http://myservername.domain.com/sap/bw/[...]/image1.gif
This is the behavior I can see at the moment.
Relative URL : http://myportal.com/sap/bw/[...]/image1.gif
This is what I'd like to see.
Many thanks in advance for your help.
François

Any idea ?

How to pass date parameter from one page to other in BSP application

Hello gurus,
In my BSP application i have taken an input field and made its type "date" and its value also of type date and have set showhelp .
Now once a particular date is given as an input i want to pass its value to next page. And in next page i have to fire a query based on the date entered in previous page...
Now my prb is that my date value is not getting passed to the next page.
I have used
navigation->set_parameter( name = 'BEGDA' value = BEGDA ).
to pass date parameter.....still parameter is not getting passed.
plz help me with this.....
thankx.....

Hi Eddy,
By truncation i mean the entire date becomes 10 char including the ' . ' eg(06.12.2006).
so with begda being 8chars it takes my date as 06.12.200
as a result my query is not getting executed.
now i have tried to use a FM 'CONVERT_DATE_TO_INTERN_FORMAT'.
in my 1st page but still in 2nd page its giving me following error.
<b>The data that was read could not be written to the specified target field during a SELECT access. Either the conversion is not supported for the type of the target field, or the target field is too short to accept the value, or the data is not in the appropriateformat for the target field.
</b>
Regards
Swati

How to deal the timeout session in BSP application

Hello everybody,
inside a BSP application, I want to inform the user that he is near to reach the timeout of its session.
So I wonder how to know the lifetime of the session and how to calculate the time from its connection.
Anyone of you can help me on his topic?
Thanks in advance.

Starting point: <a href="/people/mark.finnern/blog/2003/09/24/bsp-in-depth-confusion-between-stateless-stateful-and-authentication">BSP In-Depth: Confusion between Stateless, Stateful and Authentication</a>
The trick will be to after each roundtrip set a JavaScript timer tied to a alert statement. The weblog gives you ideas of what values you want to look at.

How to get workitem ID parameter in BSP application in UWL?

Hello All,
okay, it's been a long day and i stuck with this seemingly simple problem - how to get a workitem id in my BSP application when calling from UWL.
Points are guaranteed to all who post an answer.
i got MVC BSP iview is configured to be called for my task in SWFVISU, all re-registered and seem fine. Correct BSP is being called when i execute the workitem from UWL, but wi_id is not passed there.
What am i missing?
Thanks!

Hi Serge
How you solved it .I have same issue please let me know.
Thanks

FileUpload.bsp in BSP application SBSPEXT_HTMLB

Similar Messages

Maybe you are looking for