FileUpload get filename and PATH?

Hi everybody,
is there a chance to get also the path from where to upload a file using the fileupload-UI?
Thanks a lot
Regards Mario

Mario,
No, this is not possible due to security restrictions imposed by browsers
VS

Similar Messages

  • Trying to add filename and path in footer of Word doc and it only lets me "Convert to PDF"?

    I am running MS Office 03 and just installed Acrobat 9.0 Pro. When I try to insert the Filename and Path from the insert option of the footer properties, it only gives me the option to "Convert to PDF". I don't know why it's doing this, but it started after the install of Acrobat 9.0. What should I do?

      To get the path ... event.target.path;
    To get the file name .... event.target.documentFileName;

  • Filename and path sizes and characters

    I am failing to load 4000+ tracks to my Ipod from my XP machine using Itunes 7.50.0.20. This is an Ipod Clickwheel 20GB. I want to load 17.86GB in the now empty Ipod. However it gets so far then stops saying there is not enough space.
    I wonder if am I getting the wrong message?
    Some of my tracks have very long filenames/paths e.g 124 charactere filenames and 213 character paths. I also have some filenames with " (double quote) in.
    Could this be the reason?
    If so what characters must I avoid and what size should the filename and paths be limited to?

    Filenames and paths are irrelevant. They are renamed on the iPod anyway.
    20 GB is not really 20. It is a rounded number all HD manufacturers use. Plus you lose some space due to formatting and the iPod software. There is also meta data for the songs which takes some space.

  • Given filename or path contains Unicode or double-byte characters.Retry using ASCII characters for filename and path What does this mean? it happen when I publish an OAM

    Given file name or path contains Unicode or double-byte characters. Retry using ASCII characters for filename and path
    What does this mean? It is happening when I try to publish an OAM for Dreamweaver.
    Also: How can I specify the browser in Edge Animate? It is just going wherever. Are there no Preferences for Edge Animate?
    BTW. Just call it Edge. Seriously. Do you call it Illustrator Draw? Photoshop Retouching?

    No, my file name is mainContent.oam
    My project name is mainContent.an
    This error happens when I try to import into Dreamweaver. Sorry, I wasn't clear on that earlier.
    I thought maybe it was because I had saved my image as a png. So re-saved as a svg, still get the error.
    DO I have a setting is Dreamweaver CC that is wrong? Should I try this in Dreamweaver CS6? I might try that next.
    Why is this program so difficult? I know Flash. I know After Effects. I can work the timeline part just great. It's always in the export that I have problems.
    On a MacPro, 10.7.
    Are you an Adobe person or just a nice helper?

  • Add filename and path to Designer form footer.

    I am somewhat of a novice at creating forms in Livecycle designer and need help adding a filename and path to the footer of a form after clicking on the "save as' button.  I have not found any answers anyplace so help would be greatly appreciated ASAP. Thank you!!

    Create a field on your masterpage. Get rid of the caption, appearance=none and set as Protected. Also set your width to expand to fit. In the layout:ready event of your field, add this JavaScript:
    this.rawValue=event.target.path
    That should do it.
    Kyle

  • Insert filename and path?

    Hi,
    Can you insert the filename and path into a footer in a ID document same as you would with a Microsoft Word document?
    Thank you,
    Barb

    With CS3 use a text variable.
    Bob

  • Show filename and path of report on dashboard

    Is it possible to (automatically) show the filename and path of reports on a Dashboard?

    hi,
    we do that using Usage Tracking
    Refer : http://obiee101.blogspot.com/2008/08/obiee-setting-up-usage-tracking.html
    Thanks,
    Saichand.v

  • For preparing the filenames and paths for the oracle database files..

    Hi,
    I am preparing the filenames and paths for the oracle database files.....but I am not able to complete this one...Will you Please help for filling this one.
    Controlfile ---- > select name from v$controlfile;
    Redologfile -- > select member from v$logfile;
    Datafile --------- > select tablespace_name,file_name from dba_data_files order by 1;
    Tempfile --------> select tablespace_name,file_name from dba_temp_files;
    Spfile -----------> show parameter spfile
    Pfile --------------->
    Passwordfile ---->
    tnsnames.ora -->
    listener.ora------>
    sqlnet.ora ------>
    oratab ------------->
    Thanks
    Shiju

    orashiju wrote:
    Hi,
    I am preparing the filenames and paths for the oracle database files.....but I am not able to complete this one...Will you Please help for filling this one.
    Controlfile ---- > select name from v$controlfile;
    Redologfile -- > select member from v$logfile;
    Datafile --------- > select tablespace_name,file_name from dba_data_files order by 1;
    Tempfile --------> select tablespace_name,file_name from dba_temp_files;
    Spfile -----------> show parameter spfile
    Pfile --------------->spfile and pfile are located under $ORACLE_HOME/dbs/
    Passwordfile ----> passwordfile is located under $ORACLE_HOME/dbs
    tnsnames.ora -->
    listener.ora------>
    sqlnet.ora ------>all above files are under $ORACLE_HOME/network/admin
    oratab ------------->depends on operating system. Usualy under /etc/oratab

  • Get filename and full path from Forms on local directory in MS Windows

    I am writing a Form, when clicking a Push Button, I can click on sub-directory and select a filename, and the filename and the full path are then passed to a Text Item.
    Does any one know how this could be done?

    which version of forms?
    webforms you can use the webutils bean thing.
    client server forms there is/was the hierarchical tree object

  • Getting Filename without Path in a CFC

    Hi All,
    I'm attempting to use a CFC/Event Gateway to get the filename of a file that has landed in a directory.
    What I'm getting instead is the full path with the filename.
    <cfcomponent>
    <cffunction name="onAdd" access="public" returntype="void" output="false">
    <cfargument name="CFEvent" type="struct" required="true">
    <cfset var data = arguments.CFEvent.data>
    <cfset var filename = arguments.CFEvent.data.filename>
    </cffunction>
    </cfcomponent>
    I know that the above code isn't complete, but I think it's what 'counts' here.
    The value that I'm getting back for the 'filename' variable is similar to this:
    C:\WebSite\Some_Directory\Another_Directory\filename.ext
    What I want is just the filename  (filename.ext) part of that line.
    It appears that arguments.CFEvent.data.filename doesnt do it, and I've tried all kinds of combinations like  'filename', 'serverfile.filename', 'data.filename' and so on, but I must just be missing it.
    I found a workaround for what I'm trying to do with the CFC,  but it would be a lot easier if I just knew what I need to use in the code to just pull the filename of the file that was dropped into the directory.  (Using the DirectoryWatcher)
    If anyone can help out with how to do this,  it would be appreciated
    I've been at this for ten hours and feel like Captain Noob right about now.
    Thanks!
    CFML_MANIAC

    CFML_MANIAC wrote:
    The value that I'm getting back for the 'filename' variable is similar to this:
    C:\WebSite\Some_Directory\Another_Directory\filename.ext
    What I want is just the filename  (filename.ext) part of that line.
    It appears that arguments.CFEvent.data.filename doesnt do it, and I've tried all kinds of combinations like  'filename', 'serverfile.filename', 'data.filename' and so on, but I must just be missing it.
    You're missing nothing. It is simply that ColdFusion stores the file in the CFEvent struct as an absolute path. It makes sense, of course. The functionality is directory-watcher, so one should be able to derive information about the directory structure of the added file.

  • Programmatically change filename and path for PDFCreator

    Hello,
    I know that creating PDFs is a common question on the forum but I've yet to see someone with the same problem that I am encountering.  I'm following the example at http://decibel.ni.com/content/docs/DOC-4552#comment-12005.  I posted a question on this page but am posting again here for hopes of a faster response.
    I am able to create a pdf of the test.txt file.  However, I am unable to change the path or filename.  No matter what I select the file is created with the name and path defined in the autosave options of PDFCreator.  Since the file is created, I know that the reference is correct.  It seems that the cOption invoke nodes are not working.  If I turn on autosave in the PDFcreator options, I am prompted with a save as window.  This means that my command to use auto-save (in the config subvi) is not working.  Likely, the autosavedirectory and autosavefilename are also not doing anything.
    I'm at a loss because everything appears to be correct.  Any thoughts on what could be wrong?   (labview 8.6.1     PDFCreator 0.9)
    Solved!
    Go to Solution.
    Attachments:
    Testing PDF Creator.vi ‏9 KB

    Hello,
    Have you tried downloading the latest version of PDF Creator? It looks as though it is at 1.0.1 now. If this is a problem with the ActiveX interface, it may be resolved in the latest version.
    -Zach
    Certified LabVIEW Developer

  • Message filename and path is too long to be copied-How to fix?

    On Windows 7, TB ver 24.6.0, I use a program called SecondCopy to copy my email at shutdown from my C drive on my workstation to our file server.
    I get several messages each day like this for the copy to be saved on our network data share:
    7/4/2014 9:07:16 PM - Unable to create \\Oz\Data\System\Users\billr\AppData\Roaming\Thunderbird\Profiles\5kxps6et.default\ImapMail\imap.googlemail-4.com\INBOX.mozmsgs\urn.correios.msg.201211050157328fade3baa08b405e9a940681276b34d9%401352080653478.rte-svc-onebox-na-1d-i-8da6c8f1.us-east-1.amazon.com.wdseml Cannot create file "". The filename or extension is too long
    I've done some abbreviating of folder names, but my names pale in comparison to the LOOOOONG names TB gives them.
    How can I fix this?

    '''''I've done some abbreviating of folder names, but my names pale in comparison to the LOOOOONG names TB gives them.'''''
    That is because wdseml files are simply files created to allow windows search to index your mail. I do not allow it and safe quite a lot of totally wasted disk space on a feature I do not use. Thunderbird has a perfectly good search engine. At least as good as windows search.
    Your mail is stored in MBOX files higher up in the profile along with a file of the same name with an MSF extension that indexes the folder contents. One file and one index per folder of mail. In the example above, it will be \\Oz\Data\System\Users\billr\AppData\Roaming\Thunderbird\Profiles\5kxps6et.default\ImapMail\imap.googlemail-4.com
    So I would suggest backing up your profile minus these space takers and seriously consider simply disabling windows search. Tools menu (Alt+T) > options > advanced > General under system integration.
    Beyond that we all have to live within the 256 character limitation on path length imposed by windows.

  • Adding filename and path to Adobe Designer form footer

    We are developing a form and Document Control required the form have a field on the form footer to show the live "Path & filename".
    I need what is shown in the properties under "File" to show up in the footer. I have been unable to locate the correct syntax to type in the footer.
    Can you tell me how this can be accomplished?

    Create a field on your masterpage. Get rid of the caption, appearance=none and set as Protected. Also set your width to expand to fit. In the layout:ready event of your field, add this JavaScript:
    this.rawValue=event.target.path
    That should do it.
    Kyle

  • Add filename and path into PDF-form

    Hello,
    I create different PDF-forms for our company with LiveCycle Designer 8.2.1 .
    Now I have to integrate the name of the form-file and its path automatically into the form. My idea is to place a text-field, I will give the type "calculated" in the value-tab of the object-palette. This Text-field should be filled with the file name and the path where it's stored in the background. I find these two values in the info-tab of the form-properties dialog-box. My questions is: How do I get these values, that I can place them via script into my text field?
    Can someone give me a hint? Thanks.

      To get the path ... event.target.path;
    To get the file name .... event.target.documentFileName;

  • Get filename and directory name during runtime

    Hi guys,
    I am developing a file to file interface without content conversion, just a simple file transfer from one ftp server to another. I have to read the same filename (invent.txt) from multiple folders (mstransfer/M01/IN1, mstransfer/M02/IN1, mstransfer/M03/IN1....) that represent different stores and transfer it as it is with the same name to exactly the same directory name in the target ftp location.
    My problem is found inside a dummy mapping that I have created in order to specify the target directory and the name of the file. I am doing the following:
    A) A Java UDF to specify the filename
    trace = container.getTrace();
    DynamicConfiguration conf = (DynamicConfiguration) container.getTransformationParameters().get(StreamTransformationConstants.DYNAMIC_CONFIGURATION);
    DynamicConfigurationKey key = DynamicConfigurationKey.create("http://sap.com/xi/XI/System/File","FileName");
    String filename = conf.get(key);
    trace.addWarning("filename = "+filename);
    conf.put(key, filename);
    return "";
    //return filename;
    B) A Java UDF to specify the directory name
       //write your code here
    trace = container.getTrace();
    DynamicConfiguration conf = (DynamicConfiguration) container.getTransformationParameters().get(StreamTransformationConstants.DYNAMIC_CONFIGURATION);
    DynamicConfigurationKey key = DynamicConfigurationKey.create("http://sap.com/xi/XI/System/File","Directory");
    String directory  = conf.get(key);
    trace.addWarning("directory before = "+directory);
    directory = "/usr/sap/trans"+directory;
    trace.addWarning("directory after = "+directory);
    conf.put(key, directory);
    return "";
    //return "/usr/sap/trans"+directory;
    In receiver file adapter I do not specify neither a filename nor a target directory.
    When I am testing it, I always get a mapping runtime error.
    Any ideas?
    --Evaggelos

    Guys,
    First of all, I am doing an end to end testing, i.e. I let the FTP adapter pick the file up and another FTP adapter delivers the file to target folder. I am definitely not testing the mapping in mapping editor.
    I get the error in Request message mapping (pipeline step, which I can see in SXMB_MONI transaction) which is a dummy mapping between two message types that I have created and are based on two data types with two fields each.
    The UDF's that I have created go in-between the source and target fileds of the message types/data types.
    The error that I see in the trace section of the XML message in SXMB_MONI is the following:
    "<Trace level="1" type="T">RuntimeException during appliction Java mapping com/sap/xi/tf/_MM_G_SRS_FileTransfer_MNS_</Trace>
      <Trace level="1" type="T">java.lang.NullPointerException at com.sap.aii.mappingtool.tf3.AMappingProgram.exceptionCaught$(AMappingProgram.java:59) at com.sap.aii.mappingtool.tf3.Transformer.checkParserException(Transformer.java:182) at com.sap.aii.mappingtool.tf3.Transformer.start(Transformer.java:149) at com.sap.aii.mappingtool.tf3.AMappingProgram.execute(AMappingProgram.java:102) at com.sap.aii.ibrun.server.mapping.JavaMapping.executeStep(JavaMapping.java:64) at com.sap.aii.ibrun.server.mapping.Mapping.execute(Mapping.java:91) at com.sap.aii.ibrun.server.mapping.MappingHandler.run(MappingHandler.java:90) at com.sap.aii.ibrun.sbeans.mapping.MappingRequestHandler.handleMappingRequest(MappingRequestHandler.java:95) at"
    I have included some trace.addWarning() lines in Java code to help me debug my code, but I cannot see them anywhere inside the trace to be getting executed.
    I will try Bhavesh's idea and I will write the code in the Java Section of my message mapping ( either Intialization or Destrcution ) section.

Maybe you are looking for