Filling Flex chart bars with line strokes

HI all,
I have requirement to fill the columns of column chart with line strokes any suggestions ??..plz put here..

Try BitmapFill or a custom fill.

Similar Messages

Horizontal scroll bar with Line charts

Hi,
I want a scrollable bar attached to x-axis as in this example(fourth one in the following URL---http://www.connectedpixel.com/blog/scrollingcharts).I able to find these feature only with ColumnCharts .Can any one tell whether can we apply the same to LineCharts .I request you to send some docs/examples of scrollbar with Line Charts
Regards
Kalavati
[email protected]

Kalavati,
it's all fairly straightforward ActionScript stuff. Create a new ActionScript class derived from Panel. In a suitable handler create the line chart and scroll bar (HScrollbar), position them wherever you want with the x/y/height/width properties, and add them as children (otherwise they won't show up).
I'm not sure what you're wanting to do with the scroll bar but let's suppose that at the start you show all the x-axis data (which is the default) and have the scrollbar thumb pointer at 100% (ie scrollPosition=maxScrollPosition). Then catch the scroll event. In the handler, work out the percentage across of the current position (this is a whole lot easier if you've set maxScrollPosition=100 to start with), then work out the implied change to the line chart in terms of data values. I don't know if you know in advance the data values or not, but it doesn't really matter. Suppose the horizontal axis is a LinearAxis. keep hold of the data max value along this axis for later use (say max_data_value), then do
LinearAxis(chart.horizontalAxis).maximum = max_data_value * [the percentage worked out from the scroll bar]
Richard

Charts (bar and line) in a tablix

Hi, I need to do this:
As you can see the bar graphic is inside the tablix (this is an excel sample btw), I found
this tutorial and it really helped me, the problem is the line chart (this
one was good too), in my report looks like this
How can I make the lines appear between each marker?

Hi mnjogin,
How did you manage to combine bar and line into one graph?
Pls advice.
Thanks!

What does an image of a closed lock on top of image of bar with line of dots on macbook pro window mean?

What does an image of a closed lock over an image of a bar with a line of dots on a macbook pro screen mean?

It's a bit hard to say wthout seeing it, it might by YDB Syndrome, the plague that was first described, documented and named by eminent and white-coated InDesign specialist Claudia McCue here. Another fix for that is to try making the background colour process or RGB, not a Pantone Spot Colour. If that doesn't work you could try posting a screenshot on this forum, use the camera tool on the web interface to upload a previously saved screenshot.

Black vertical bar with lines on Macbook pro screen Appeared out of nowhere

I was working on my computer late at night. Like always.
I went to bed, and left the computer on in it's screen saver , as I always do.
When I woke up I had a black vertical bar on the screen about 1 1/2 inch thick with some flickering lines next to it.
here is what it looks like: http://www.talkcitee.com/ourspaceimages//2coolcode/2coolcode.jpg
I don't believe this to be a memory problem, I can take snapshots of the full screen, and I can hook up an external monitor with no problem. Also restarded PRAM plenty of times, etc.
But this black bar appeared out of nowhere. As if one way my screen decided it was going to blow out on me out of nowhere. I've had this MacBook for 2 years.
Question is, do you think the problem is:
a) the screen
b) connection / short problem to the screen inside the macbook
I hope it's B , because they told me it would cost $800 to replace the screen which is stupid cus I can get a new macbook pro for less than that.
I think there is a connectivity problem with the hardware , possibly a short, or something messed up with the wires or pins that link to the screen.
I noticed after repeatedly opening and closing the macbook, there were some changes in the small flickering lines next the big bar, and some of them turned solid black.
Has this happened to anybody else before?
Message was edited by: Uhuru83

Usually what happens is that over time the cable comes loose from the back. This happens because the enclosure within the hinge housing is quite tight and the LVDS cable has little room to move around. Because of the frequent opening and closing on the lid, the cable starts to move out of place try opening and closing it a few times and push it back very gently. You might see the line disappear or decrease slightly.

How to fill an object made with line segment?

I made some objects with the line segment tool, but i cant seem to fill them. Not even when i group the lines and try to fill after.
Anybody an idea? thanks

Live paint will do the trick you select the lines and click on the live paint bucket tool which will make the lines a part of live paint group, there are options for controlling the gap distance.
Then select a color and click the live paint tool somewhere in the area that the lines are used to define. it will fill with that color.n CS 2 and 3 I think well CS3 for sure.

Printing Flex Chart Application with FireFox 2 and later

Hi, I have problem with printing functionality in FireFox. The print preview shows an empty page. So the user ends with this step and thinks no print is available. Another problem is when I try to print directly not the whole application will be printed.
Is there an easy way to get FireFox to print correctly.
Thank you for all your helpful answers.

On MacOsx (firefox 3.0.5) the width is correct (674).
Probably your javascript embed has been messed up for some
reason.
It should be something like:
<embed width="674" height="680" align="middle"
type="application/x-shockwave-flash" pluginspage="
http://www.adobe.com/go/getflashplayer"
allowscriptaccess="sameDomain".../>
HTH

Flex Chart -- Why is it so buggy and not getting fixed

Hi
We are trying to replace our realtime dashborad with flex
3.x charts. We're getting hit with numereous memory issues such as
http://bugs.adobe.com/jira/browse/FLEXDMV-1686
http://bugs.adobe.com/jira/browse/SDK-15710
Bugs have been filed since April and no updates from Adobe at
all.
At the current state Flex chart is only good for displaying
static data that doesn't change.
Why is this not in flex's high priority list given the fact
that one of the major allure of flex (besides multi-media of
course) right now is charting on the client to off load server
load?
Why is the flex charting group so unresponsive to bugs filed
given the fact that people are shedding quite a bit of mulla to get
this functionality??

I'm attaching here the section from sdk-15710 (flex jira)
where numerous people have been asking for the availability of this
bug fix which have gone unanswered.
Hoping someone from adobe will have some answers.
eddie berman - [10/03/08 12:55 PM ]
We're in need of this fix as well. Can you give some
indication as to when it might be ready for consumption, or if it
already is how we might be able to get it? (Also any comment on
FLEXDMV-1882 would be appreciated as well). Thanks.
[ Show » ]
eddie berman - [10/03/08 12:55 PM ] We're in need of this fix
as well. Can you give some indication as to when it might be ready
for consumption, or if it already is how we might be able to get
it? (Also any comment on FLEXDMV-1882 would be appreciated as
well). Thanks.
[ Permlink | « Hide ]
kai mai - [10/22/08 06:11 PM ]
any update on when this fix will go out and how we can help
test this fix?
[ Show » ]
kai mai - [10/22/08 06:11 PM ] any update on when this fix
will go out and how we can help test this fix?
[ Permlink | « Hide ]
Alan Carwile - [11/07/08 07:20 PM ]
On the Adobe site, there are two bugs that seem to be the
cause of the memory leak we are seeing when using the Flex Charting
package with 3.0 Flex, running on Windows XP Pro SP2. Both are
recorded as Fixed, and one is also noted as Closed. Still we are
seeing what looks like one or both of these bugs.
Adobe Flex community: How do we verify for certain that we
are running versions of Flex containing these fixes? What version
has fixes for both cases? How do we make sure?
Please provide more information in the JIRA issues for both
bugs. Obviously these are of interest to the developer community,
given the follow-up posts and the number of Voters and Watchers.
Thanks,
Alan Carwile, Omneon, Inc. [email protected]
http://bugs.adobe.com/jira/browse/SDK-15710
Flex SDK
Memory Leak in Charting
Fixed, Closed
Votes: 12
Watchers: 19
http://bugs.adobe.com/jira/browse/FLEXDMV-1772
Flex Data Visualization Components
ARLabelData class in AxisRenderer.as is causing memory leak
with every new update of dataProvider in ColumnChart
Fixed, Resolved
Votes: 1
Watchers: 1

SVG Multi Graph/Chart with line and bar

I have a request for a "Multi-Graph-Chart"
showing both - line chart and
- bar-chart with respective data.
Can you provide for the sourcecode, which is behind the SVG chart wizard enabling us to develop an own/individual SVG chart ?
pls kindly advise.
Bernhard
nb. I mailed u this request already - but thought this might be of interest to others as well.

Marc
I would support this addition to functionality. I currently have a client who has a requirement for complex charting in HTMLDB, and I am looking at the SVG packages in HTMLDB, ie: WWV_FLOW_SVG, but as you say they are not independent APIs and rely heaviliy on the application's metadata. This is a shame as I could quite easily handle a nice PL/SQL API that would let me create custom SVG, instead of generating the SVG manually and embedding that in the page.
Cheers
Ben

How to combine a bar with a line in a chart

Post Author: rbcdexia
CA Forum: Charts and Graphs
We want to combine data in bars and with a line showing in one chart.
Is that possible? How do you configure your chart?
The line and the bars are based on the values from different fields in the same table.

Post Author: pareshb
CA Forum: Charts and Graphs
We are using Crystal Reports for Visual Studio 2005. Can you please let me know how to combine a bar with a line chart.
Thanks in advance.Paresh

Horizontal Bar Chart and Overlaying Line Chart

I am using SSRS 2008 and developing my reports in BIDS.
I have a report with two data points. I want to chart the first as a bar (horizontal) chart and then the second as an overlaying line chart.
I created both data series, originally, as a bar chart. I have clicked on the second series in the "Drop Data Fields Here" area and changed the chart to a line chart. When I do that, it changes both series to a line chart.
However, if I use the column (vertical) chart for the first series, it will let me make the second one a line chart.
Is this a limitation of SSRS 2008? Can I not have one data point be the horizontal bar chart and the second one a line chart?
If so, are there any suggestions how to get around this?
Thanks.

Both charts for SSRS 2005/2008 are very limited when it comes to horizontal charts and are infact supporting only left-to-right bar charts, with no ability to combine them with other charting types (lines, areas, points etc.). For a SSRS charting solution that supports all types of charting type combinations in left-to-right and right-to-left horizontal fashion you can use Nevron Chart for SSRS - www.nevron.com. Besides a huge number of charting types and subtypes (most of which are not available in the MS Chart for SSRS 2008) it also provides better image quality in 2D and 3D modes, more settings, has support for rich text formatting in texts, has image filters, ability to customize via C# code and implements many more large and small charting related details.
Best regards,
Crank

Stacked 100% bar chart - Problem with datatips for zero value data points

I have a stacked 100% bar chart that shows datatips in Flex 4.   However, I don't want it to show datatips for
data points with zero values.   Flex 4 shows the datatip for a zero value data point on the left side of a bar if the data point is not the first in the series.
Here's the code that illustrates this problem.    Of particular concern is the July bar.    Because of the zero value data point problem, it's not possible to see the datatip for "aaa".
Any ideas on how we can hide/remove the datatips for zero value data points ?        Thanks.
<?xml version="1.0"?>
<s:Application
xmlns:fx="
http://ns.adobe.com/mxml/2009"xmlns:mx="
library://ns.adobe.com/flex/mx"xmlns:s="
library://ns.adobe.com/flex/spark"creationComplete="initApp()"
height="
1050" width="600">
<s:layout>
<s:VerticalLayout/>
</s:layout>
<fx:Script><![CDATA[
import mx.collections.ArrayCollection;[
Bindable]
private var yearlyData:ArrayCollection = new ArrayCollection([{month:
"Aug", a:1, b:10, c:1, d:10, e:0},{month:
"July", a:1, b:10, c:10, d:10, e:0},{month:
"June", a:10, b:10, c:10, d:10, e:0},{month:
"May", a:10, b:10, c:10, d:0, e:10},{month:
"April", a:10, b:10, c:0, d:10, e:10},{month:
"March", a:10, b:0, c:10, d:10, e:10},{month:
"February", a:0, b:10, c:10, d:10, e:10},{month:
"January", a:10, b:10, c:10, d:10, e:10}]);
private function initApp():void {}
]]>
</fx:Script>
<s:Panel title="Stacked Bar Chart - Problems with DataTips for Zero Value Items" id="panel1">
<s:layout>
<s:HorizontalLayout/>
</s:layout>
<mx:BarChart id="myChart" type="stacked"dataProvider="
{yearlyData}" showDataTips="true">
<mx:verticalAxis>
<mx:CategoryAxis categoryField="month"/>
</mx:verticalAxis>
<mx:series>
<mx:BarSeries
xField="a"displayName="
aaa"/>
<mx:BarSeries
xField="b"displayName="
bbb"/>
<mx:BarSeries
xField="c"displayName="
ccc"/>
<mx:BarSeries
xField="d"displayName="
ddd"/>
<mx:BarSeries
xField="e"displayName="
eee"/>
</mx:series>
</mx:BarChart>
<mx:Legend dataProvider="{myChart}"/>
</s:Panel>
<s:RichText width="700">
<s:br></s:br>
<s:p fontWeight="bold">The problem:</s:p>
<s:p>Datatips for zero value data points appear on left side of bar (if data point is not the first point in series).</s:p>
<s:br></s:br>
<s:p fontWeight="bold">For example:</s:p>
<s:p>1) For "June", eee = 0, mouse over the left side of the bar to see a datatip for "eee". Not good.</s:p>
<s:br></s:br>
<s:p>2) For "July", eee = 0 and aaa = 1, can't see the datatip for "aaa", instead "eee" shows. Real bad.</s:p>
<s:br></s:br>
<s:p>3) For "Feb", aaa = 0, datatip for "aaa" (first point) does not show. This is good.</s:p>
<s:br></s:br>
<s:p>4) For "Mar", bbb = 0, datatip for "bbb" shows on the left side of the bar. Not good.</s:p>
<s:br></s:br>
<s:p fontWeight="bold">Challenge:</s:p>
<s:p>How can we hide/remove datatips for zero value data points?</s:p>
<s:br></s:br>
</s:RichText></s:Application>

FYI.
Still have the issue after upgrading to the latest Flex Builder 4.0.1 with SDK 4.1.0 build 16076.
Posted this as a bug in the Adobe Flex Bug and Issue Management system.     JIRA
http://bugs.adobe.com/jira/browse/FLEXDMV-2478
Which is a clone of a similar issue with Flex 3 ...
http://bugs.adobe.com/jira/browse/FLEXDMV-1984

How to Generate Chart (line chart, bar chart)!

I want to generate Graphic Chart using Java,(e.g. line chart, bar chart).
Is any Class can easy to generate Chart??
thanks!

petes1234 wrote:
meacod wrote:
Dimpu wrote:
i need the source code how to generate the graphs using the Java
Give me teh codes?
And yes, this thread is old.Also note how the poster here politely requests help along with the use of the word "please". Very instructive. He'll get far here.Indeed, you are wise in the ways of the fool **bows politely**

Cfchart yaxis scale is wrong when combining bar and line charts

Hi, I am trying to combine a bar and line chart ti display data. Everything looks good except that the yaxis scale is off. I set the scaleMin to 0 but that doesn't help. Below is my code, the custom XML style and a screen shot. My ultimate goal is to get the yaxis to start at 0, not -1,000 as is currently the case. I have combined this data with each set represented as bar charts and do not have this problem. It must be the combo of bar and line charts together. Any assistance is most appreciated.
<cfchart title = "#variables.ReportName# Seedlings Ordered"
    style = "../SO_R_overall.xml"
    Format = "PNG"
    pieSliceStyle = "solid"
    show3D = "no"
    showBorder = "yes"
    showLegend = "yes"
    tipStyle = "MouseOver"
    chartHeight = "#DefinedChartHeight#"
     chartWidth = "#DefinedChartWidth#"
    font="arial"
    fontsize="12"
    fontBold="yes"
    scaleFrom="0">
    <cfchartseries
        type="bar"
        seriesLabel="Goal"
        query="getDivisionGoalsByDivision"
        valueColumn="divisiongoal"
        itemColumn = "division"
        dataLabelStyle="Value"
        seriesColor="99CCFF"
        >
    </cfchartseries>
    <cfchartseries
        type="line"
        seriesLabel="Ordered"
        query="getQTYordered"
        valueColumn="QTYordered"
        itemColumn = "division"
        dataLabelStyle="Value"
        seriesColor="green"
        >
    </cfchartseries>
</cfchart>
***************** Custom Chart Style called *****************
<?xml version="1.0" encoding="UTF-8"?>
<frameChart is3D="false">
        <frame xDepth="3" yDepth="3" outline="#333333" lightColor="white"
        leftAxisPlacement="Front" rightAxisPlacement="Front" stripColor="#CCCCCC"/>
        <xAxis scaleMin="0">
            <labelStyle isHideOverlapped="false" orientation="Horizontal"/>
            <titleStyle font="Arial-10-bold" isMultiline="true">Division</titleStyle>
        </xAxis>
        <yAxis scaleMin="0">
            <titleStyle font="Arial-10-bold"/>
            <dateTimeStyle majorUnit="Year" minorUnit="Month"/>
            <labelFormat style="Pattern" pattern="#,##0"/>
        </yAxis>
        <dataLabels font="Arial-10" foreground="black" autoControl="true"/>
        <legend>
               <![CDATA[ $(rowLabel) ]]>
          </legend>
        <decoration style="RoundShadow"/>
        <popup background="#C8FFFFFF" foreground="#333333"/>
        <paint paint="Plain"/>
        <insets left="5" top="5" right="5" bottom="5"/>
</frameChart>

I should have also said that I am using 8.0 Pro.
I want to have the output similar to an e-book.
The issue (Sept-October of 19xx)
Then the individual pages (bookmarked)

Stacked Column Chart with Line

Hi
I need to Create a Stacked Column Chart representing 1 set of measures with a Line representing a target.
I want to create a chart where the Sales Amount in different Sectors is represented as a stacked column and the targets are represenetd as a line.
Currently BO supports Bar charts with line.
Does anyone know if such a feature will be supported in the new release of BO XI. Also is it possible to raise a request for this feature to be included in the new release
TIA

We are also a 30 persons department (Marketing) using in the same BO charts (since 2001) quarters made of :
- first single column ( 2014 billing in a query1)
- second stacked column (2015 billing +2015 firm orders backlog, 2015 frame orders backlog in a query2)
- third single column (2016 backlog in a query3)
and a superposed budget line
the first and the third column are offset respectively to the left and right of the second column by blank and dummy single columns of data called ghost1 and ghost2. 2016 is still empty here but the principle is clear.
This principle is used liberally in 200 + different reports. Also with transparent columns and other complicated, but graphically intuitive reports.
How can we continue to use this very natural representation of our several hundred million $ business. I have not found the mixed single column, stack column and line option in BO XI 3.1 . Please re-develop one asap if necessary. SAP should please please report asap on the recovery timeline of this lost feature. The switch from Visual Basic development to Java development should not lead to regression of any feature.
Regards.
Jean-Marc Imbert
Marketing manager

Filling Flex chart bars with line strokes

Similar Messages

Maybe you are looking for