Filter problem in the report
Experts,
We have a problem with Filter on Costcenter taking very very long time . When we click on Filter button on Cost center after executing a BW report, then a new window opens and nothing happens after that with a blank white screen in the filter window. We have tried so many options to improve performance but only one thing worked out as a work around.
I have deleted enteried in the master data table using TC SE14 and then reloaded master data. Then filter on this working now with in 1 min. But we have process chains running every day loading Master data .Once these process chains finish again when we filter on Cost center on the next day, now the problem still exists , takes long time to for filter window to open up. Is there any way to delete master data entries delete automatically. Any advice appreciated .
Thanks
Hi Kiran,
Is that u are doing the master data full upload?
Try to do delta loads.
If it is the client specific. Create a process chain to delete the same master data contents. and schedule the process chain to run daily night or just before the master data loads happen, so that it will not affect the runtime. Else have to delete the same manually.
Hope this helps u.
regards,
Kishore.
Similar Messages
-
How to add a filter/selection into the report title?
Hi experts,
Currently I try to fugure out how to set up a field into the page header (title) of a report in order to dynamically adapt the title to selected filter criteria. I tried to use the Reprot Filter Summary, but since I do have several sheets in my reports the information given through it is not applicable.
What I would like to achieve is that the end user can select e.g. a category X and Y and the title says: "Report title - categories: X,Y" Somthg like this. I'd appreciate any tips.
Best regardsHi guys,
thanks so far. I managed to show prompts in the report. But still my problem is nor 100% solved
I would like t achieve that the filtered criteria in the report title is separated through a comma like in the report filter summary - e.g.: {001, 002, 003, 004} followed by just 1chart/table that is including the whole information.
When I however just drag a variable into the report it automatically created different sections, right? Like ........ table, chart, whatever... .......table chart whatever........
Regards -
Issue in using presentation variable as filter condition in the reports
Hi,
I have an issue in using presentation variable as filter condition in my reports the details are as follows:
Details :
We want to implement the Max and Min variables through Presentation variables only.we do not want to implement it through session variables in this case.
We have two variables MIN and MAX to be used as Presentation Variables,for a column of the report (which is a quantity),so that the user wants to see the data for this column within a particular range.i.e the Min and the Max.This part has been implemented well . The issue is when the user wants to see the full data.In that case we will not pass any values to these two Presentation Variable or in other words we are not restricting the report data so we are not passing any value to the variables,this is when the report is throwing the error. we want to leave this variables blank in that case.but this is giving error.
Please suggest how can I overcome this issue.
Thanks in Advance.
Regards,
Praveeni think you have to use guided navigation for this. create two reports first is the one you are having currently and second is the one in which remove the presentation variable from the column formula. i.e. the same report with no aggregation applied.
Now create a dummy report and make it return value only when the presentation variable value is not equal to max or min. guide the report to navigate between the first and second report based on the result of the dummy report. -
Implicit Fact column creating problem to the reports.
Hi Friends,
I have two reports from same subject area from two different facts F1 & F2.
I have created one implicit column, as it is unable to judge from which fact it needs to build the query. So, it is genarting query from fact F1.
I have created one logical column in the fact and marked it as Implict column in presnenation layer.( as we the process)
But the problem is, for both the reports it is using same implicit column and it is generating the query with only one fact F1.
It is excluding the other fact F2.
One report it shoud use Fact1 and other report it should use Fact2.
PLease hep me in regarding this,
Thanks & Regards,
Kalyan J VKallu wrote:
Hi Friends,
I have two reports from same subject area from two different facts F1 & F2.
I have created one implicit column, as it is unable to judge from which fact it needs to build the query. So, it is genarting query from fact F1.
I have created one logical column in the fact and marked it as Implict column in presnenation layer.( as we the process)
But the problem is, for both the reports it is using same implicit column and it is generating the query with only one fact F1.
It is excluding the other fact F2.
One report it shoud use Fact1 and other report it should use Fact2.
PLease hep me in regarding this,
Thanks & Regards,
Kalyan J VFrom my understanding, implicit fact column's are set a subject area level and not dimension/fact level. So the fact table you have set for implicit fact will be used in both the reports. Why dont you just drag the second fact into the report and hide it, if you are not trying to use the fact 1 that is setup as implicit fact? -
'&' character creating a problem in the reports query
Hi
I am facing a problem with the '&' character in the reports
The top level reports return data .One field in the top level report contain certain values that have '&' character in it.
When we navigate to the second report,it says "No Data" .
On checking the query at the backend,it displays data as soon as we comment this particular "WHERE" clause containing the '&' character
EG:WHERE Name ="a&b"
the query takes the &' character in "Name" column as an input fileld and hence it fails.
I checked some blogs on this.But all explains on using SET define off/Or use CONCATENATE to iinsert this kind of data
But how do we make the server understand to read this &' character also as a normal text instead of taking it as an input parameter?
Is there anything that can be done at the OBIEE RPD level?
Thanks in advanceHi,
Refer the SAP Note 137601
Or,
You have to upgrade the Kernel. Check the old patch number in ur system, upload the latest patches & down load from Market Place. Consult your Basis Consultant
Regards,
Biju K
Edited by: Bijay Kumar Barik on Mar 27, 2008 8:25 AM -
Hi friends,
I changed the name of my Business Model in Admin tool.
Now whenever I'm trying to modify my previous reports, I'm not able to access the columns there and it gives me the following message on the left.
"Either you do not have permission to use the subject area "ABC" within Answers, or the subject area does not exist."
Please helpThis is a problem that I believed Oracle fixed with 10.1.3.4.
In previous versions, you will need to replace the columns. (An alias is created so if there is no change to the design, the reports would run fine. But when you try to make modifications to the design is when the problem occurs.) -
Re: Date related problem in the report parameter
Hi Friends,
I am done a report and i registered the the report in the and for this report i had given two parameters 'Date_from' and 'Date_to' for this two dates i had taken value set as 'Date' which is None type value set and contians 9 Characters.
My probelm if i give values for this parameters
Date_from value is 21-JAN-08
Date_to value is 11-Mar-08
it is showing the error like this
'please choose a low value that is lower than the high value'
it is considering the 21 and 11 numbers first it is not considering the
months.
please reply any one to this asap.
Thanks In Advance!!
Thanks
Anushka ValluruHi Chiru,
Thanks for your reply and i also tried with this but
i am getting error becuase in my query in the where
clause i used like below
WHERE (TO_DATE (ldate, 'DD-MON-YY') BETWEEN
NVL (TO_DATE (:p_date_begin,'DD-MON-YY'), TO_DATE
(ldate, 'DD-MON-YY') )
AND
NVL (TO_DATE (:p_date_end,'DD-MON-YY' ),TO_DATE
(ldate, 'DD-MON-YY')) )
so it is not taking the dates, in standard date, it
is taking total time also and the date format is also
different.so what i have to do?
please reply for this asap
Thanks
AnushkaAnu,
Can you post your entire query? How did you define your exectuable?
The standard date has the date and the timestamp. You need to substr and get the date part.
Example:
1) use the FND_STANDARD_DATE value set.
2) use the following select statement in the default value of your date parm
select to_char(trunc(sysdate),'DD-MON-RRRR')from dual
3) Where ever you are capturing each of the dates in your query (like your begin/end dates), use the following:
to_date(substr(I_date,1,10),'RRRR-MM-DD') --replace "I_date" with your date
--replace date mask with your date mask
Hope this helps...
Thanks,
Chiru -
Problems with the report export in PDF format
Hi All,
I am new to this forum.
I'm developing a web application that uses Java Reporting Component (JRC) to display crystal reports.
I have three problem:
1) I want, after entering the filters in a jsp, to print a report in PDF format (WORD) without opening it
with Adobe Reader (Microsoft Word). The class of API JRC used for export is ReportExportControl.
2) I want to print multiple reports one after the other to reduce the time (possibly joining two or more reports into a single PDF)
3) I want to insert, in the jsp page filters, the number of pages to print from the same report (without
opening it with Adobe Reader (Microsoft Word))
Can anyone help me? or can give a simple java code to do the same.
Thanks in advance.Hi, this works for me in 4.6B:
CALL FUNCTION 'GUI_DOWNLOAD'
EXPORTING
BIN_FILESIZE =
filename = i_pfad
filetype = 'BIN'
IMPORTING
FILELENGTH =
TABLES
data_tab = i_att_cont
EXCEPTIONS
file_write_error = 1
no_batch = 2
gui_refuse_filetransfer = 3
invalid_type = 4
OTHERS = 5.
IF sy-subrc <> 0.
MESSAGE i000(zv) WITH 'Problem mit PDF Darstellung'.
ENDIF.
CALL FUNCTION 'RSPO_R_RDELETE_SPOOLREQ'
EXPORTING
spoolid = spoolnr.
CALL FUNCTION 'WS_EXECUTE'
EXPORTING
document = ' '
commandline = i_pfad
program = 'AcroRd32.exe'
EXCEPTIONS
frontend_error = 1
no_batch = 2
prog_not_found = 3
illegal_option = 4
gui_refuse_execute = 5
OTHERS = 6.
IF sy-subrc <> 0.
MESSAGE i000(zv) WITH 'Acrobat Reader nicht gefunden!'.
ENDIF. -
Adding of values problem in the report
Hi All,
I have a reporting requirement like below.
Object 1 Object 2 Ob1 + Ob2
$ 1,534,080 $ 294,697 $ 294,698,302
$ 2,750,761 $ 0 $ 2,751
$ 715,028 $ 38,611 $ 38,612,200
$ 95,337 $ 0 $ 95
$ 107,712 $ 0 $ 108
$ 5,202,918 $ 333,308 $ 333,313,456 Totals
But the total of the totals should be * 5,536,204 * but instead of this I have $ 333,313,456
I tried for the option before aggregation in the calculated Key figure.
How can I solve this problem?Hello
Actually if you will see the total of OBJ1 and OBJ2 row wise, that is also wrong. So first check out the formula you have written to calculate the addition of obj1 and obj2. When it will be correct, result row will definitely show correct value.
$ 1,534,080 + $ 294,697 = $ 294,698,302 (is wrong).
Here, I think you are dividing Obj1 values by 1000. If you will see this row
$ 95,337 + $ 0 = $ 95
Here obj1 is value is divided by 1000 then only result is coming as $95.
So check out the calculation. -
BOE XI 3.1: Problem with Simple Report Filter.
Hi everyone!.
One requirement that i have in one customer is about the use of simple reports filters, the customer doesn't want to use the input controls.
If i add one simple report filter and save the report, the final user can add other simple report filters, but the problem is that the name "Others" appears with all the variables than i have created to be used in the report.
Is it possible to hide the group "Others"?
Thanks!
Edited by: Jaime Pestaña on Mar 12, 2010 10:26 AMIf I understood you clearly, I think you have few variables created and one set of variable is called Others and you dont want users to see it.
There are couple of things you can do.
First one is to Use Othere filters as constant and it will not appear.
Second you can use others filter at Report level and it will not prompt to users.
Bashir Awan -
Hi all,
We have stock report.There is one problem in the report.We are using
"2LIS_03_BF" and " 2LIS_03_UM " as data source and " 0AFMM_C02" as info source.
When i run the report with material as row its giving me the correct result.But when i pass plant into row then it shows me only few plants. Only option to check the stock at plant level is that i have to select all the records. this is working in the development server but not in produciton... as there are many records... in the production...
i am not able to understand what is the logic behind it... its happening even if i create a new query....
Can you suggest me any option ...
Regards,
Viren.No Solution
-
Problem in exporting report in CSV format
Hi All,
I am using Crystal Reports. Following are details about it:
CR Developer
Product 8.5.0.217
*_Problem that I am facing:__*_
I can create report in .rpt format, it is working fine here. But while trying to export this report in CSV format, it gives report that doesn't contain any information.
Is it because I am missing something or it is a known issue?
Thanks and Regards,
AnandHi,
I too am facing the same problem.
The report was made in 8.5. I have exported the report & opened it in Crystal report 12.
I can export to PDF, RTF, DOC & Tab separated Test.
However when I export this report in .csv (legacy mode) I just get the header & when I export it in .csv (Standard) I get a blanck .csv file.
I have checked 'Isolate Report/Page sections' and 'Isolate Group sections'. Still no data in the report.
refreshed it too.
I contains sub reports, but not in the page header & footer (I think) & it does not seem to have cross tabs & OLAP grids.
Any help is appreciated.
Links to Screenshots:
Main Report:
http://picasaweb.google.com/lh/photo/yM9sBexKt5jW9soqaMmHjw?feat=directlink
One of the Sub-Report:
http://picasaweb.google.com/lh/photo/0ofa5sABakvZ-nFZp-JSMw?feat=directlink -
I filed the report on a response I recieved that wanted it.
My orginal post did have the problem. The report was filed in response to that post and the question I posted about. Having problems with facetime and a messaage problem with c_l kernel plugin. I did not know I would have to repost the problem every time I gave information that was asked for by a member of the board. On other boards I belong to it all goes to the original thread under my user name.
You do not have to start new threads. All you need to do is to reply to any such requests for additional information in your original thread. The Reply command is below every post in the thread. You can see all your posts by clicking "My Stuff" at the upper-right. Here are the links directly to your previous threads:
https://discussions.apple.com/message/22715581#22715581
https://discussions.apple.com/message/22716078#22716078
Since you now have two different threads on the issue, I'd suggest choosing one and either copying the information from the other and posting it as a reply to your original post, or pasting in a link to the other thread.
You might find the tutorials in using the Communities helpful:
https://discussions.apple.com/static/apple/tutorial/index.html
Regards.
Message was edited by: varjak paw -
Not able to view the values on the report viewed using Query Report Viewer
Hi all,
There seems to be some unknown problem with the Report Template I have prepared and uploaded on PIA XML Publisher. When I run it with some ID set, it doesn't seem to show the values from the Data I give. For example if I have a field called ChartField in my report Template, It doesn't seem to get populated when I do SetID.
Why is it so?Hi all,
select bdmng from resb into corresponding fields of table it_stpo2
for all entries in it_stpo
where matnr = it_stpo-idnrk
and xloek ne 'X'.
loop at it_stpo2.
move-corresponding it_stpo2 to it_stpo.
append it_stpo.
endloop.
In the above code, m able to fetch the records in the table it_stpo2. but the data is not gettin populated in the final internal table it_stpo. Both the internal tables it_stpo & it_stpo2 are same.
The data is gettin moved from it_stpo2 to it_stpo but only upto the header level. its not gettin appended in the table it_stpo even after using append stmt.
Plz help me to resolve this issue. its urgent.
Rgds,
Purva -
Unable to print the report in second page
Hi,
I've got a problem in the report. Here In a report, I'm able to print the report's data in the first page only. I'm unable to print it in the second page,third page etc.
To rectify the problem, I've selected all the fields and set their property "Print Object on" to All pages. Still the problem exists.
Thanks in advance.
Regards,What exactly do you mean by 'unable' ? Do you only get a 1 page report, OR do you get multiple pages with the 2nd, 3rd blank OR do the 2nd, 3rd have text but not data OR something else?
"Print Object On" should be "First Page" - it sounds wrong but it's talking about logical pages (which may be multiple physical pages).
Maybe you are looking for
-
When I plug in my external LaCie drive I get an error message "the disc you inserted was not readable by this computer." The only options offered are "ignore" or "eject" Disk Utility sees the disc but does not give a repair option. What can I do?
-
Change Xcode default document name?
Hi guys, I have a document based Core Data project here and I dislike the fact that that when I go "Save As" it says "Untitled". How can I change this? Thanks, Ricky.
-
DataDictionnary Table or View for InfoSources/Communication Structure
Hi, I am looking for the assignment between (Source) Fields and InfoObjects. this is equivalent to: I am looking for a Data Dictionnary-Table or -View which describes the InfoSource fields / or Communication Structure fields. Anybody got a hint ? Th
-
Can you help me put all my songs back on my iPhone. I receive an error message 15030 Y
-
ITunes Image and Description Not Updating
Hello, First of all, let me share my feed details. Feedburner Feed URL: http://feeds.feedburner.com/TheDaveAndSteveShow WordPress Hosted URL: http://www.dasshow.com Source URL for Feed: http://www.dasshow.com/?cat=4 XML Posted Below Yesterday I updat