Filter Question - compound statement "OR" clause

Hi
I am trying to filter records which contain multiple conditional statements; (all comparisons are on DATE values)
Example:
If column_A is NULL OR ( columnA=ColumnB )
I tried this: which worked for the first condition
FILTER (1=(@COLTEST(COLUMN_A,NULL)) ;
And then tried to add the second clause
FILTER (1=(@COLTEST(COLUMN_A,NULL)) OR 0=@STRCMP(@IF(@COLTEST(COLUMN_A,NULL),0,COLUMN_A), @IF(@COLTEST(COLUMN_B,NULL),0,COLUMN_B))) );
I've tried CASE, EVAL and just a straight OR as well with no success. Unfortunately the 'where' clause has multiple compound statements.
Does anyone have any tips for this?
Thanks

I think there is an extra closing bracket at the end. Also, give spaces after the @ functions. Could you try the below?
FILTER ( 1 = (@COLTEST(COLUMN_A,NULL)) OR 0 = @STRCMP ( @IF (@COLTEST (COLUMN_A,NULL),0,COLUMN_A), @IF (@COLTEST (COLUMN_B,NULL),0,COLUMN_B) ));

Similar Messages

  • Adding filter conditions dynamically in WHERE clause -dynamic SQL help

    Here I have a simple condition but very complicated query. Basically, I have to put a filter condition in my where clause. "Location" comes to the stored procedure as parameter. Plus there are other parameters as well.
    If location = "all", I can run the query simply and get the result. But when Location = "CA", which is just a subset of "ALL" then I am having hard time putting one -- AND statement in WHERE clause.
    This query is designed for location = 'ALL'
    open cv for
    'Select col1, col2, col3, Col4
    from t1, t2, t3
    WHERE condition1
    AND condition2
    AND condition3'
    AND location = location_id --- This should only run if location IS NOT ALL
    I have written a dynamic query but it doesn't work for that part. Any ideas will be appreciated. Thanks,

    From what I understood
    If location = 'ALL' then
    fetch all the records
    Else
    add extra filter location_id = <supplied location id>
    End If
    If this is the condition the following logic should solve your issue.
    open cv for
    'Select col1, col2, col3, Col4
    from t1, t2, t3
    WHERE condition1
    AND condition2
    AND condition3'
    AND ((location_id = location_id and location = 'ALL') or (location_id = location))Regards
    Raj

  • HT5312 I am trying to reset my security questions, I cannot locate the option for a rescue email address with My Apple Id. When I click on the button to reset the security questions, it states it is sending an email to the primay email address, but it doe

    I am trying to reset the Security Questions as I have forgotten them, when I have logged into My Apple Id, and click on the button to reset the Security Questions, it states it is sending an email to the Primary Email address. I do not have the option to input a Rescue Email address, the only option I have is to input an Alternate Email address, which I have done so.
    Also when I have tried to book an appointment throuth Online Support, I have not successful, I have rung a telephone number provided by the Mac Store in Perth, Australia and the reply provided is that we are closed. I was given to understand that Apple provided 24/7 Support to their users.

    Hot N Spicy wrote:
    I am trying to reset the Security Questions as I have forgotten them,
    Forgotten Security Questions / Answers...
    See Here > Apple ID: Contacting Apple for help with Apple ID account security
              Ask to speak with the Account Security Team...
    Or Email Here  >  Apple  Support  iTunes Store  Contact
    More Info >  Apple ID: All about Apple ID security questions
    Note:
    You can only set up and/or change a Rescue Email Before you forget the questions/answers

  • Applying filter to all states in animation

    Hi, im new to fireworks for animating.
    I have a bunch of images (about 150) in an animations and i wanted to apply a color fill filter to all states. What is the most effective way to do this?
    Thank you

    One way to apply filters to multiple states is by onion skinning. It basically makes all objects clickable at once, regardless of what states they're on.
    Click on the small button in the lower left corner of the States panel. Make sure that "No Onion Skinning" is unchecked, and "Multi-State Editing" is checked. Also, if you want to apply the effect to all of your states, check "Show All States" as well.
    Now, while you are in the first state of animation, switch to the Select Behind tool (hit 0 to toggle from the regular selection tool). Hold down Shift and repeatedly click on the canvas to select objects from consecutive states. You can check if it works by looking at the radio buttons on the rightmost side of each state in the States panel. With each click, the radio button in the next state gets marked.
    When you're done with the selection, set the live filter as you normally would with a single object, and it will automatically apply to all selected objects in all states.
    It's still a tedious method when there are a lot of objects involved, like in your case. Not only it's a lot of individual selections, but also rapid clicking will be registered as a double-click, changing the Select Behind tool to one of the marquee tools.
    There might be a more efficient way, but it requires some experience with blend modes. The steps are the following:
    Make a new layer, right-click it and select "Share Layer to States". Make sure that this layer is the topmost layer in the stack.
    Draw a rectangle with solid fill, no stroke. Make sure it that  it spans the entire animated area.
    With the rectangle selected, play around with the Blend modes (in the upper left corner of the Layers panel), until you get the color effect you're looking for. The color change will affect the entire animation, just as if you applied a color fill to all objects. The final look will depend on the rectangle's initial color, the blend mode, and the colors of the underlying objects.
    Good luck!
    SiamJai
    Innovative Fireworks Tutorials

  • Filter Question part II

    Hi,
    do you remember my previous post? Well, now I've a similar requirement, but again I haven't a solution. i've following question:
    I've a prompt with two choices: "All" and "WITHOUT ICO" wich fill a presentation variable 'ICO'. Then i've a report that contains a column "JDE Account" wich contains accounts id (if an account is ICO then it will finish with letter I, otherwhise not.
    Examples of ICO Accounts: 1384I, 14849I and so on
    Examples of WITHOUT ICO Account: 3893, 4484.
    I want that if user choices 'ALL' prompt value the report returns all accounts, otherwhise if user choices 'WITHOUT ICO' prompt value the report filter only accounts WITHOUT ICO.
    I've tried many filters (simple filters and complex), but it doesn't work. Can you help me???
    Thanks
    Giancarlo

    Hi,
    i've tried but it doesn't work. I give following error:
    Error during retrieving drilling info: SELECT "Cost Center"."Organization Region Description" saw_0, FILTER(Prototype."Fact PNL"."Local Actual Monthly" USING Prototype.R012."R012 1 position Code"='A') saw_1, FILTER ("- Budget"."Local Budget Monthly" USING Prototype.R012."R012 1 position Code"='A') saw_2, FILTER(Prototype."Fact PNL"."Local Actual Monthly" USING Prototype.R012."R012 1 position Code"='A')-FILTER ("- Budget"."Local Budget Monthly" USING Prototype.R012."R012 1 position Code"='A') saw_3, (FILTER(Prototype."Fact PNL"."Local Actual Monthly" USING Prototype.R012."R012 1 position Code"='A')/FILTER ("- Budget"."Local Budget Monthly" USING Prototype.R012."R012 1 position Code"='A')-1)*100 saw_4 FROM Prototype WHERE (Time."Year" = 2010) AND (Time."Desc Month" = 'January') AND (Country."Country Code Company GOAL Code" IN (SELECT saw_0 FROM (SELECT Country."Country Code Company GOAL Code" saw_0 FROM Prototype WHERE Country."Company Description" = 'GERMANY') nqw_1 )) AND ("JDE Account"."HFM Account Code" in (Select "JDE Account"."HFM Account Code" From Prototype where ‘WITHOUT ICO’ = ‘Tutti’) OR "JDE Account"."HFM Account Code" in (Select "JDE Account"."HFM Account Code" From Prototype where "JDE Account"."HFM Account Code" not like ‘%I’ and ‘WITHOUT ICO’ = ‘WITHOUT ICO’))
    Error Details:
    Error Code: YQCO4T56:OPR4ONWY:U9IM8TAC:OI2DL65P
    Driver Odbc returns an error (SQLExecDirectW).
    State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 27002] Near <ICO’>: Syntax error [nQSError: 26012] . (HY000)
    Istruzione SQL eseguita: {call NQSGetLevelDrillability('SELECT "Cost Center"."Organization Region Description" saw_0, FILTER(Prototype."Fact PNL"."Local Actual Monthly" USING Prototype.R012."R012 1 position Code"=''A'') saw_1, FILTER ("- Budget"."Local Budget Monthly" USING Prototype.R012."R012 1 position Code"=''A'') saw_2, FILTER(Prototype."Fact PNL"."Local Actual Monthly" USING Prototype.R012."R012 1 position Code"=''A'')-FILTER ("- Budget"."Local Budget Monthly" USING Prototype.R012."R012 1 position Code"=''A'') saw_3, (FILTER(Prototype."Fact PNL"."Local Actual Monthly" USING Prototype.R012."R012 1 position Code"=''A'')/FILTER ("- Budget"."Local Budget Monthly" USING Prototype.R012."R012 1 position Code"=''A'')-1)*100 saw_4 FROM Prototype WHERE (Time."Year" = 2010) AND (Time."Desc Month" = ''January'') AND (Country."Country Code Company GOAL Code" IN (SELECT saw_0 FROM (SELECT Country."Country Code Company GOAL Code" saw_0 FROM Prototype WHERE Country."Company Description" = ''GERMANY'') nqw_1 )) AND ("JDE Account"."HFM Account Code" in (Select "JDE Account"."HFM Account Code" From Prototype where ‘WITHOUT ICO’ = ‘Alli’) OR "JDE Account"."HFM Account Code" in (Select "JDE Account"."HFM Account Code" From Prototype where "JDE Account"."HFM Account Code" not like ‘%I’ and ‘WITHOUT ICO’ = ‘WITHOUT ICO’))')}
    However i haven't a column All.
    Thanks
    Giancarlo

  • Adobe Acrobat 8 and I Filter Question

    Hello,
          I have Adobe Acrobat 8 and I Filter 6.0 installed on a WinXP machine. I am also using Windows Search 4.0. My question is on how to create an embedded index of PDF files so that I may search with a keyword through 100 PDF files as an example. This is actually my last resort after searching thoroughly on the web. I have read articles ranging from editing the registry to how to create a single index within Adobe Acrobat for a single PDF file. Again I am looking to create one index that consists of multiple PDF files. If any can help me I would very much appreciate it. I just say to myself that at some point in time some programmer must have said to himself, can I search for a keyword through 20 PDF files on a desktop system or server?
    Thank you,
    Peter

    Hey john,
    Please try downloading Acrobat 8 from the following link:
    Download Acrobat products | 9, 8
    Regards,
    Anubha

  • Library Filter Question

    Within the Metadata Library Filter I often use the 'Treatment' tag to view just colour or just B&W images. I discovered that to give an image the 'Black & White' treatment stamp you needed to use the B&W section in the develop module. However I often use CS5 for my B&W conversion so my question is, is it possible to get this "Black & White' treatment stamp without actually using that aspect of the Develop module?
    Thanks in advance guys

    Unfortunately not.
    Your black and white photos made in Photoshop, will be treated as "Color", even if they were converted to a grayscale "space" in Photoshop. And you cannot even change the treatment to "Black and White", because the treatment control is disabled for grayscale files. This is a little dumb.
    My work around is to apply a "BW" keyword to these files, then use a smart collection with the following rule set:
    Any of the follwofing:
         Treatment is "black and white"
         Keywords contain words "BW"

  • Contract Generation question: Formatting, Numbering of clauses, variables

    Hi!
    I am trying to create a Contract Document Template (for Contract Generation) with Variables
    I created some Variable Collections, but when I link them to the Contract Template, they add on with a different formatting altogether, which is neither like the placeholder in the template nor like the template attached to the variable.
    My variable configuration was of the type Paragraph.
    If anyone has any helpful tips on formatting Contract Document Templates, it would be most appreciated.
    Also, how do I ensure that numbering of sections and clauses is sequentially made in the final Contract.
    Regards,
    Reshma

    I was able to fix the problem by making some word document format changes.
    Please ignore this question.
    Regards,
    Reshma

  • Question about statement for all entries

    Hi Abap experts,
    I have a question concerning the ABAP statement for all entries.
    Explanations:
    Let’s say that my source package (Source table) contains 2 types of data:
    -type1
    -type2
    I would like to use the statement select from table into internal table
    For all entries in source package
    But the where statement changes depending on the data type (2 keys when data type is 1 and only 1 key when data type is 2) .
    So that would be:
    Type1:
    Select fields
    From table into internal table
    Where field1 = source_package-field1
    And field2 = source_package-field2.
    Type2:
    Select fields
    From table into internal table
    Where field1 = source_package-field1
    How can I merge them assming that the field od data type is ftype?
    Thanks.
    Amine

    Hi amine,
    i think this is helpful for you.
    there are 2 ways  to use the for all entries...
    1. with header line:  this method is old one. in this method the internal table (ITAB) is automatically create workarea (WA) with same name, this method 1 drawback is there where we can use WA and ITAB confused that's why this is come difficult.
    2. without header line : this is nowadays we can use this method. in this method we create separate ITAb and WA. very clear this method.
    EXAMPLES:
    1.WITH HEADER LINE METHOD:
    PARAMETERS p_kunnr TYPE kna1-kunnr.
    DATA:it_kna1 LIKE kna1 OCCURS 0 WITH HEADER LINE,
          it_adrc LIKE adrc OCCURS 0 WITH HEADER LINE,
          it_adr2 LIKE adr2 OCCURS 0 WITH HEADER LINE,
          it_adr6 LIKE adr6 OCCURS 0 WITH HEADER LINE.
    START-OF-SELECTION.
       SELECT * FROM kna1 INTO TABLE it_kna1
          UP TO 100 ROWS.
       IF NOT it_kna1[] IS INITIAL.
         SELECT * FROM adrc INTO TABLE it_adrc
         FOR ALL ENTRIES IN it_kna1
         WHERE addrnumber = it_kna1-adrnr.
       ENDIF.
       IF NOT it_adrc[] IS INITIAL.
         SELECT * FROM adr2 INTO TABLE it_adr2
         FOR ALL ENTRIES IN it_adrc
         WHERE  addrnumber = it_adrc-addrnumber.
       ENDIF.
       IF NOT it_adr2[] IS INITIAL.
         SELECT * FROM adr6 INTO TABLE it_adr6
         FOR ALL ENTRIES IN it_adr2
         WHERE  addrnumber = it_adr2-addrnumber.
       ENDIF.
       LOOP AT it_kna1.
         READ TABLE it_adrc WITH KEY addrnumber = it_kna1-adrnr.
         IF sy-subrc = 0.
         ENDIF.
         READ TABLE it_adr2 WITH KEY addrnumber = it_kna1-adrnr.
         IF sy-subrc = 0.
         ENDIF.
         READ TABLE it_adr6 WITH KEY addrnumber = it_kna1-adrnr.
         IF sy-subrc = 0.
         ENDIF.
         WRITE : it_kna1-kunnr, it_kna1-name1, it_adrc-city1, it_adrc-street, it_adrc-po_box_reg,
                      it_adr2-telnr_long, it_adr6-smtp_addr.
       ENDLOOP.
    2. WITH OUT HEADER LINE:
    TABLES: KNA1 , ADRC.
    DATA : IT_KNA1 TYPE STANDARD TABLE OF KNA1,
            IT_ADRC TYPE STANDARD TABLE OF ADRC,
            WA_KNA1 TYPE KNA1,
            WA_ADRC TYPE ADRC.
    DATA: BEGIN OF STRTYPE ,
           CUSTMERNO LIKE KNA1-KUNNR,
           FIRSTNAME LIKE KNA1-NAME1,
           LASTNAME  TYPE NAME2,
           CITY TYPE ORT01,
           STATE TYPE REGIO,
           COUNTRY TYPE LAND1,
           ADDRESS LIKE ADRC-ADDRNUMBER,
           END OF STRTYPE.
    DATA : IT_1 LIKE TABLE OF STRTYPE.
    SELECT-OPTIONS  K_kunnr FOR kna1-kunnr NO-EXTENSION.
    SELECT * FROM KNA1 INTO TABLE IT_KNA1 WHERE KUNNR IN K_KUNNR.
    IF NOT IT_KNA1[] IS INITIAL.
    SELECT * FROM ADRC INTO WA_ADRC FOR ALL ENTRIES IN IT_KNA1 WHERE ADDRNUMBER = IT_KNA1-ADRNR.
    ENDSELECT.
    ENDIF.
    LOOP AT IT_KNA1 INTO WA_KNA1.
       READ TABLE IT_ADRC INTO WA_ADRC WITH KEY ADDRNUMBER = WA_KNA1-ADRNR.
       IF SY-SUBRC = 0.
           STRTYPE-ADDRESS = WA_ADRC-ADDRNUMBER.
       ENDIF.
    APPEND  STRTYPE TO IT_1.
       WRITE : / WA_KNA1-KUNNR, WA_KNA1-NAME1, WA_KNA1-NAME2, WA_KNA1-ORT01, WA_KNA1-REGIO, WA_KNA1-LAND1, WA_ADRC-ADDRNUMBER.
    ENDLOOP.
    regards,
    roopa.k

  • In how many ways we can filter this select statement to improve performance

    Hi Experts,
    This select statement taking 2.5 hrs in production, Can we filter the where condition, to improve the performance.Plz suggest with coding ASAP.
    select * from dfkkop into  table t_dfkkop
               where   vtref   like 'EPC%'        and
                   ( ( augbd      =  '00000000'   and
                       xragl      = 'X' )
                               or
                     ( augbd between w_clrfr and  w_clrto )  )  and
                       augrd      ne '03'         and
                       zwage_type in s_wtype .
    Regards,
    Sam.

    if it really takes 2.5 hours, try the followingtry to run the SQL trace and
    select *
              into table t_dfkkop
              from dfkkop
              where vtref like 'EPC%'
              and augbd = '00000000' and xragl
             and augrd ne '03'
             and zwage_type in s_wtype .
    select *
              appending table t_dfkkop
              from dfkkop
              where vtref like 'EPC%'
             and augbd between w_clrfr and w_clrto 
             and augrd ne '03'
             and zwage_type in s_wtype .
    Do a DESCRIBE TABLE after the first SELECT and after the second,
    or run an SQL Trace.
    What is time needed for both parts, how many records come back, which index is used.
    Siegfried

  • View State question - changing states and custom states

    Hi all,
    I'm working on an application that lets a user register for an event. Each event has associated child information: conferences, tickets, etc. associated with it. What I'm trying to do is create some sort of checkbox list so that, when a user clicks on an event to add it to his registration, the associated child information appears in the display so he can choose all this information at once. I have the list working and I've been trying to use a custom ItemRenderer to pop in the extra info for the user to select when he clicks on an event. The problem I'm having is that, when the user goes to click on a child to add it to his registration, my state is changing back from "selected" to "normal" and the child information disappears. So I guess I have two questions. One, am I even remotely on the right track here? If not, can someone suggest a better approach? Two, if this is the right approach, how do I solve the "disappearing child" problem? I tried creating a custom state that would set everything to visible, but I can't seem to figure out how to get into it...I tried just putting a click event on it and just doing an Alert.show(currentState) to see if I was even getting into my custom state, but I just kept switching between "normal" and "selected."
    Code:
    ItemRenderer:
    <s:ItemRenderer name="eventItemRenderer"
    xmlns:fx="http://ns.adobe.com/mxml/2009"
    xmlns:s="library://ns.adobe.com/flex/spark"
    focusEnabled="false" xmlns:mx="library://ns.adobe.com/flex/halo" xmlns:registrationapi="services.registrationapi.*">
    <fx:Script>
    <![CDATA[
    import mx.controls.Alert;
    import mx.events.FlexEvent;
    //this gets my data to populate the dropDown list when the parent event is selected
    protected function checkbox1_clickHandler(event:MouseEvent, selectedEventCode:String):void
    showPrimaryConferences = true;
    getEventConferencesResult.token = registrationAPI.getEventConferences(selectedEventCode.name);
    protected function comboBox_creationCompleteHandler(event:FlexEvent):void
    getEventConferencesResult.token = registrationAPI.getEventConferences(data.EventCode);
    ]]>
    </fx:Script>
    <s:states>
    <s:State name="normal"/>
    <s:State name="hovered"/>
    <s:State name="selected"/>
    </s:states>
    <s:Rect top="0" left="0" right="0" bottom="0">
    <s:fill>
    <s:SolidColor id="backgroundColor" color="0xFFFFFF" />
    </s:fill>
    </s:Rect>
    <!-- checkmark -->
    <s:Path data="M 3.5 6.5 l 2 2 l 6 -7" includeIn="selected" right="2" verticalCenter="1">
    <s:stroke>
    <s:SolidColorStroke weight="2" caps="square" color="0x000000" />
    </s:stroke>
    </s:Path>
    <fx:Declarations>
    <s:CallResponder id="getEventConferencesResult"/>
    <registrationapi:RegistrationAPI id="registrationAPI" fault="Alert.show(event.fault.faultString + '\n' + event.fault.faultDetail)" showBusyCursor="true"/>
    </fx:Declarations>
    <s:VGroup left="3" right="10" top="3" bottom="3">
    <s:CheckBox name="{data.EventCode}" label="{data.EventTitle}" id="selectedEventCode" fontWeight="bold" click="checkbox1_clickHandler(event, selectedEventCode.name)" />
    <s:Label text="{data.EventTitle}" id="selectedEventCodeLabel" fontWeight.selected="bold"  />
    </s:VGroup>
    </s:ItemRenderer>
    Thanks in advance for any suggestions!
    ~ amanda

    I simplified the problem to it's essence and came up with this:
    <?xml version="1.0" encoding="utf-8"?>
    <mx:Application xmlns:mx="http://www.adobe.com/2006/mxml" layout="horizontal"
        creationComplete="init()">
        <mx:Script>
            <![CDATA[
                import mx.collections.ArrayCollection;
                [Bindable]
                public var lProvider:ArrayCollection;
                private function init():void
                    var la:Array = [{label: "Conference", checked: true},
                                    {label: "Tickets", checked: false}];
                    lProvider = new ArrayCollection(la);
            ]]>
        </mx:Script>
        <mx:List id="cList" width="200" dataProvider="{lProvider}" itemClick="lProvider.refresh()">
            <mx:itemRenderer>
                <mx:Component>
                    <mx:HBox width="100%">
                        <mx:CheckBox selected="{data.checked}" click="data.checked = event.target.selected"/>
                        <mx:Label text="{data.label}"/>
                    </mx:HBox>
                </mx:Component>
            </mx:itemRenderer>
        </mx:List>
        <mx:VBox width="600">
            <mx:Panel title="Conference component" width="100%" height="200"
                    visible="{lProvider.getItemAt(0).checked}"
                    includeInLayout="{lProvider.getItemAt(0).checked}"/>
            <mx:Panel title="Ticket component" width="100%" height="200"
                    visible="{lProvider.getItemAt(1).checked}"
                    includeInLayout="{lProvider.getItemAt(1).checked}"/>
        </mx:VBox>
    </mx:Application>
    Does this help?
    Dany

  • Filter Question 1: Shift Field - when to shift it?

    And by "shift it", I'm really asking in what order to place it, relative to any other filters being applied. And is there a rule of thumb for this particular filter being first or last in the stack?
    The Specific Issue:
    I notice FCP applies the filter automatically when I add HD material to a standard def Timeline (see "Workflow" description below), where the extra material has a different "Field Dominance" than the main footage. This triggers a green render bar, which thankfully doesn't take long to process.
    But I'm starting to see some odd behavior when I then add other filters to one of these clips whose Fields have been automatically Shifted by FCP.
    Specifically, I've been testing MagicBullet's "Noise Reducer" filter on a few of these clips (ones where I've had to magnify the image more than it really wants to be), and once the absurdly long render finally finishes*, the playback of just these clips gets very wonky on my external monitor (with a flashing blue that eventually takes over the whole screen, but only for these clips -- and FinalCut's telling me there's nothing left to render).
    * and this is the subject of a whole 'nother filters-related question I've posted in this same forum
    Interestingly, when I drag the Shift Fields filter from its default top-of-the-stack position in the Viewer down to the bottom, so that it comes after the MB Noise Reducer -- and then wait for another huge render to finish -- now everything seems to play back fine.
    Both filters (FCP's Shift Fields and MB's Noise Reducer) are configured in their default settings, and this apparent conflict with the Shift Fields filter appears to not occur in relation to any other filters I've also been testing (such as Sharpen and Deflicker).
    So -- is this just one of these trial-and-error things, where you keep reordering the filters till they seem happy, or is there a reason why the automatically applied Shift Fields filter should always be last in the stack (even though intuitively it feels like something which should be applied first)?
    Any insights appreciated.
    Thanks,
    John B.
    Toronto
    *Workflow Description*
    (which might be of interest to other one-man-band, tight-budget videographers)
    +I'm currently cutting a series of videos done for a local theatre company. My A-cam is a Sony MiniDV shooting 4:3, and my Timeline is the basic NTSC-DV easy setup. I generally also set up a B-cam at a different angle, which is locked off to get a static shot of the full performing area. This camera is a compact AVCHD unit, shooting at full 1920x1080. I put its material on a separate video track, and when I need to cut to it I use the Motion tab to frame the shot, resize it, and crop in as desired. Sometimes I'll even keyframe a pan and/or slight zoom to give the effect of a human cameraperson following the action live. Since both cameras are recording continuously, I only have to sync up the two tracks once -- and the end product gives a reasonably convincing impression of a two-person shoot.+

    Clearly I need to check in with the Jolly Red Giant himself, since I'm wondering if he's the one I should be pointing my finger at with regard to a bizarre issue I'm encountering: trying to export a previously harmless sequence which now contains clips with two Red Giant / Magic Bullet filters -- all fully rendered, but the Export time is expanding faster than a Supernova.
    Thread is called "Renders Gone Wild", if you have any advice on what I should do.
    Thanks,
    jb

  • Sorting question over state...

    Hi there,
    Anyone know where you amend the over state / hover of an option in a sorting question ???
    Been looking in the object style manager but can't find it in there...
    Thanks in advance...

    You are talking about the partially transparent grey bar that appears when hovering over an answer in the Sequence type of questions. There is no style that can be customized AFAIK. It is not even changing with the included themes. Same is valid for the connecting lines in matching questions that are always black, color cannot be changed for them neither. It is a pity, would recommend you enter a feature request to be able to customize the color of both the hover bar and those lines.
    https://www.adobe.com/cfusion/mmform/index.cfm?name=wishform
    Lilybiri

  • Select Statement -- Where Clause Execution Order

    What is the order of execution of the "AND" and "OR" in the WHERE clause of a Select statement?
    Are the "AND"'s executed from the top down, left to right? Is it the same for the "OR"'s execution?
    Thanks for any help...

    Not clear why you care. There is an order in which the optimizer parses the SQL (which may change from ver to ver), but this is a fairly quick operation. The order in which tables are visited and predicates evaluated is dependent on what the op[timizer does with the SQL.
    Ken                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                           

  • Filter in MDX Statement

    I have a very basic MDX statement which contains a FILTER statement:
    WITH
    SET [Selected Discipline] AS STRTOSET(@Disciplines, CONSTRAINED)
    SET [Selected Department] AS STRTOSET(@Departments, CONSTRAINED)
    SET [Selected Departments] AS IIF(@Disciplines = @Departments,
    FILTER(
    DESCENDANTS([Selected Discipline], [Employee].[DISC - DEPT - EMP].[Department], AFTER),
    NOT INSTR([Employee].[DISC - DEPT - EMP].CurrentMember.UNIQUE_NAME, "Freelance")),
    DESCENDANTS([Selected Department], [Employee].[DISC - DEPT - EMP].[Department], AFTER))
    SET [TTM] AS { LastPeriods(12, StrToMember(@SelectedMonth, CONSTRAINED)) }
    SELECT
    [Measures].[Employee Hours],
    [Measures].[Employee Hours %]
    } ON COLUMNS,
    NON EMPTY CROSSJOIN(
    [Selected Departments],
    [Employee].[Employee Bill Rate].[Employee Bill Rate].ALLMEMBERS,
    [Employee].[Employee Level].[Employee Level].ALLMEMBERS,
    [TTM]) ,
    FILTER ([Employee].[Manager Name].[Manager Name].Members ,
    NOT InStr([Employee].[Manager Name].CurrentMember.MEMBER_NAME, "O-Tern"))
    DIMENSION PROPERTIES MEMBER_CAPTION, MEMBER_UNIQUE_NAME ON ROWS
    FROM [OLSON BI]
    WHERE (
    [Employee Hours Time Category].[Time Category].&[Client Facing],
    [Employee Hours Time Category].[Utilization Category].&[PRODUCTION])
    CELL PROPERTIES VALUE, BACK_COLOR, FORE_COLOR, FORMATTED_VALUE, FORMAT_STRING, FONT
    When running the query, I get the "Failed to parse the query to detect if it is mdx or dmx".
    THe qqy=uery is basic enough, but for the life of me can't figure out what is wrong????
    Any suggestions woud be greatly appreciated!!
    Thanks
    A. M. Robinson

    I literally have the exact same query running in a different report and it runs fine.
    Also, your FILTER is in a SET statement - mine is not. That is the major difference between my query and yours.
    SELECT
    [Measures].[Employee Hours],
    [Measures].[Employee Hours %]
    } ON COLUMNS,
    NON EMPTY CROSSJOIN(
    [Selected Departments],
    [Employee].[Employee Bill Rate].[Employee Bill Rate].ALLMEMBERS,
    [Employee].[Employee Level].[Employee Level].ALLMEMBERS,
    [TTM]) ,
    FILTER ([Employee].[Manager Name].[Manager Name].Members ,
    NOT InStr([Employee].[Manager Name].CurrentMember.MEMBER_NAME, "O-Tern"))
    If I remove the filter statement from this query and run it WITH the same parameters it runs fine - and has been running fine for literally over a year. The introduction of this FILTER statement is causing an issue.
    So either the filter is in the wrong place or it's not formed properly.
    I can provide a couple of examples of queries that are the ecact same with parameters and run fine, and when a FILTER is introduced they still run fine.
    A. M. Robinson

Maybe you are looking for