Filter steps with empty results from report

Hi,
At the moment, my result filtering expression is Result.Status != "Done" && Result.Status != "Skipped", so it removes all steps which are only "Done" or "Skipped". With my current filtering expression, any step with the "Done" status will not be displayed in the report even if there are "Additional Results". I would like to improve this by filtering only if there is not result.
This means that I would like to log in the report any step which returns a value including values added in "Additional Results".
Is there any way to achieve this ? I've been looking in the RunState but I was not able to find there the additional results are stored.
Thanks !
Alex

You can also check if AdditionalResults is empty or not:
GetNumElements(Result.AdditionalResults) > 0
jigg
CTA, CLA
teststandhelp.com
~Will work for kudos and/or BBQ~

Similar Messages

OBIEE Report - filter based on the result from another analysis

Hi,
I am using OBIEE 11g,
I am trying to use a filter which is based on the result from another analysis. I have an analysis A which is as table 1, and I want to filter the respective columns of analysis B (Table B) based on analysis A to remove the duplicates for march 01, 02, and 07 , but it is not working properly. I took a max of start and end time when I created analysis A. Please let me know if I did anything wrong. thanks.
Table 1
Employee Number
Date
IN
Out
Start Time
End Time
xxxxxxx
2015-02-26
9:00
13:00
00:00:00
00:00:00
2015-02-27
12:00
18:00
00:00:00
00:00:00
2015-02-28
8:00
14:00
00:00:00
00:00:00
2015-03-01
14:00
20:00
14:00:00
20:00:00
2015-03-02
16:00
20:00
16:00:00
20:00:00
2015-03-07
14:06
20:02
14:00:00
20:00:00
2015-03-11
16:00
20:00
16:00:00
20:00:00
2015-03-14
8:00
14:00
00:00:00
00:00:00
2015-03-25
14:00
20:00
16:00:00
20:00:00
Table 2
Employee Number
Date
IN
Out
Start Time
End Time
Hours
xxxxxxx
2015-02-26
9:00
13:00
00:00:00
00:00:00
-3
2015-02-27
12:00
18:00
00:00:00
00:00:00
6
2015-02-28
8:00
14:00
00:00:00
00:00:00
6
2015-03-01
14:00
20:00
00:00:00
00:00:00
6
14:00:00
20:00:00
6
2015-03-02
16:00
20:00
00:00:00
00:00:00
4
16:00:00
20:00:00
4
2015-03-07
14:06
20:02
00:00:00
00:00:00
6
14:00:00
20:00:00
6
2015-03-11
16:00
20:00
16:00:00
20:00:00
4
2015-03-14
8:00
14:00
00:00:00
00:00:00
6
2015-03-25
14:00
20:00
16:00:00
20:00:00
4

Why avg here?
What columns you want to show in the report?
for a employee for given date if he have 2 rows then you may sum up hours right?
Employee Number
Date
IN
Out
Start Time
End Time
Hours

Issues with iCloud synchronisation and contacts over two or more devices. iTouch and iPad2 sync with different results from iMac. Thoughts?

Has any one experienced issues with iCloud synchronisation and contacts over two or more devices? The primary machine is an iMac running Lion. Address Book was created from vcf file (backup of address book prior to moving to iCloud). iTouch replicates Contacts just fine and matches the Address Book on the iMac. The iPad 2 does not showing only 123 contacts where there should be 200. I have turned off iCloud on both devices thus erasing the iCloud content of both devices and staring from scratch with both devices with identical results. Even turned off iCloud on the iMac and erased the Address Book and rebuilt with the same results. Anyone have any ideas or suggestions? I am going nuts.....

To follow-up with this issue:
I ended up performing a security wipe on my device. The security wipe finished, and I was about to reconnect with Exchange when I decided to visit our host's web site to see if they had any articles covering the issues I was experiencing. While they didn't have anything specific, I did find a step-by-step guide to connecting a BB10 device to Exchange... and right there at the end, it said "Do NOT enable memo sync."
I contacted support, and the rep told me that OS 10 has an issue with memo sync and it can cause all sorts of unpredictable behavior. Now, whether or not this is accurate I can say this: So far, the device is not disconnecting and reconnecting like it was before. Problem is, is this a result of not enabling memo sync, or is this a result of the security wipe?
I may have overlooked it, but I don't recall reading anything about that anywhere else. I'm tempted to try re-enabling the memo sync to see if everything blows up again. At least that way I can see for myself if the memo sync is a real issue. Of course, perhaps it's an issue with SherWeb (our host) specifically. Hm...
Anyway, for those that were interested, and for those that may come along in the future with a similar situation, the strange behavior that I first reported is no longer happening. I just don't know if it was a result of a security wipe or a result of not enabling memo sync with Exchange.
Ian

Extract Sql Query with Actual Parameters from Report

Hi
I am able to extract query from Crystal Report using the following code :
ReportDocument.ReportClientDocument.RowSetController.GetSqlStatement(new GroupPath, out tmp);
But the sql query retrieve comes in the following format :
select name , trans_code, account_code from command_query.accounts
where account_code = {?Command_query_Prompt0} and effective_date < '{?Command_query_prompt1 }'
The parameters which I m using in the reports are :
Account_Code and Effective_Date .
Why does my extracted sql translates it into {?Command_query_Prompt0} and '{?Command_query_prompt1 }' .
Is there any way to map this to the actual parameter values ?
OR
Can we extract the query after assigning the values ?
Any help is appreciated ...
Thanks
Sanchet

hi,
You can create nested sql query with conditional parameters,
For example
Select Code From OITT Where Code IN (Select ItemCode From OITM
Where ItemName LIKE '[%0]' + '%%')
Edited by: Jeyakanthan A on Jun 9, 2009 12:31 PM

Referencing a page item with query results from another page

Hello Gurus,
Any Idea How to achieve following in APEX.
Step 1: Page 1, Region A of type SQL report.
Sql query:
select employee from emp;Step 2: Page 2, A display item is created on this page, say :P2_X that is intended to source its values from the query/region written in Page1.
In this example stated above, I need to display :P2_X on PAGE 2 that in receives value from employee column on the query mentioned in step 1.
Any idea how to achieve this?
Thank you for reading this post.
-R

Hello Rich,
Edit your SQL Report.
Under Column Attributes , edit the EMPLOYEE Column.
Go to LINK Tab.
In link text : select the first option #EMPLOYEE#
In Target is - select Page in this application.
in item type P1_X and in value enter #EMPLOYEE#
Regards,
Shijesh

Column Filter Prompt with SQL Results failing

I am trying to restrict a prompt's values so that that the column which contains dates are only valid dates in our production load history. Usually these are dates prior to the current date. I have tried several queries in SQL results, but I keep getting an error. Anyone know what I'm doing wrong here?
Select "IBS_LOAD_DASHBOARD"."DATE_OF_DATA" from "IBS Stats". "IBS_LOAD_DASHBOARD" where "IBS_LOAD_DASHBOARD"."DATE_OF_DATA" <= "LAST_IBS_LOAD"."Last Data Load" ( LAST_IBS_LOAD"."Last Data Load" is the last valid load date)
or
Select "IBS_LOAD_DASHBOARD"."DATE_OF_DATA" from "IBS Stats". "IBS_LOAD_DASHBOARD" where "IBS_LOAD_DASHBOARD"."DATE_OF_DATA" < CURRENT DATE
On a separate note, when I get the prompt working, only the prompt shows in the initial results. Is there a way to get both the prompt and the full results on the dashboard?
Edited by: BISP on Jun 6, 2012 3:10 PM

I created another request which comes from a view with our last prod load date. I then linked to this date in the filter

Issue with accessing URL from Report!!

Hi,
In one of the reports we are displaying a URL in the report output. When the user clicks on the URL it should open the site in a new browser window. The URL is being displayed in 3 rows because of the column size, and when the user clicks on the URL only the fragment present in the first row is considered.
Since the link is pointing to incomplete URL, when clicked navigates to 'Page not found'/ Bad gateway.
Example:
Document Link : http://www.oracle.co
m/partners/public/knowledge-zone/dat
abase/data-warehousing.html
Any pointers to overcome this issue would be of great help.
Thanks,
Kartik

How to insert hyperlinks...
http://download.oracle.com/docs/cd/E12844_01/doc/bip.1013/e12187/T421739T481157.htm#4535361

How can I copy test plan WITH ITS RESULTS (PASS/FAIL) to other project in MTM??

How can I copy test plan WITH ITS RESULTS (PASS/FAIL) to other project in MTM??

Hi odedn,
Thank you for posting in MSDN forum.
Based on your issue, you mean that you want to copy the test plan with test results from the current team project
to other team project, am I right?
If yes, as far as I know that when we copy test plan with test results to other team proejcts. It is default that
there just will not copy the test plan with test results (pass/fail) to other team project in MTM.
You can refer the following MSDN document’s
what gets cloned, it explained that which objects are copied from the source test plan to the destination test plan.
Reference:
http://msdn.microsoft.com/en-us/library/hh543843.aspx
If you still want to this feature, I suggest you can
submit this feature request:
http://visualstudio.uservoice.com/forums/121579-visual-studio. The Visual Studio product team is listening to user voice there. You can send your idea there and people can vote. If
you submit this suggestion, I hope you could post that link here, I will help you vote it.
Thanks for your understanding.
Best Regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Unable to call a form from report

hello
i have a drill-down report, from where i wanna to call a transacation level form, so that user can modify the data from that transaction level form after seeing the result from report. After modification in data through form, report should be refreshed automatically.

Hi,
if this is for Forms on the web, just call the Reports from web.show_document() when closing the Forms (assuming you close the Forms after the update).
If it is on client/server then you don't have a hook into Reports except you run a new Reports from Forms and close the Reports that called the Forms application (needs to be done within this Report)
Frank

Constructing test with multiple results

Hi, I have the question for Lilybyri:
I learn to construct test with multiple results from your article:
Constructing Test with Multiple Results (CP5)
This is exactly what I need. My question is - can I use the radio button interaction or smart shape instead click box? What you recommend? I use CP7 or CP8.
Need to publishing the final test both HTML5 and SWF output. My test wil have 55 questions and 4 results score - one of them describe the personality of learner.
Yarik

Advasntage of click box and shape button is that they can have score
attached to it. That is not the case for radio buttons interaction that has
also limited formatting options.

WHERE using results from another querie

Hi,
Example:
<cfquery name="QUERY 1" datasource="MyDatabase">
SELECT Table1ID, A, B, C
FROM Table1
WHERE A = #Form.A#
<cfoutput query="QUERY1">#A#<br></cfoutput>
It returns:
3
4
<cfquery name="QUERY 2" datasource="MyDatabase">
SELECT Table2ID, A, Z, Y
FROM Table2
WHERE A IN (3,4)
<cfoutput query="QUERY
2">#Table2ID#</br></cfoutput>
It returns:
a
b
c
d
e
f
But if I make QUERY2 as:
<cfquery name="QUERY 2" datasource="MyDatabase">
SELECT Table2ID, A, Z, Y
FROM Table2
WHERE A IN (#QUERY1.A#)
it returns only:
a
b
c
The values a,b,c are the Table2ID's where A=3
The values d,e,f are the Table2ID'a where A=4
How can I make return all values?
Hope you understand.
Thanks
Manel

Think about what you are doing for a second. You are
selecting multiple rows of data with your first query. Then you are
using a cfloop to loop through each row returned from that first
query to perform another query that uses the value returned in the
A column. The problem is that you are executing your second query
once for each row returned by your first query, and you really
aren't saving that result anywhere, since each iteration of the
loop causes your cfselect to overwrite your previous results. You
can create a list variable and populate it with the results from
your first query, but I have to ask, unless you need the results
from your first query for something else, why don't you just join
the two tables and use on equery?
Based on what you have, something like this?
<cfquery name="QUERY 2" datasource="MyDatabase">
SELECT T2.ID, T2.A, T2.Z, T2.Y
FROM Table2 T2
INNER JOIN Table1 T1 ON T2.A = T1.A
WHERE T1.A = #Form.A#
</cfquery>
Phil

Records with a picklist field with empty values can't be seen from a report

Records with a picklist field with empty values can't be seen from a report. I've created a report that have a picklist as a column. When there is no values the record(s) associated to this picklist don't appear. Do you know what are the common causes for this event?
Regards
Arturo

Hi samrat chakraborty ,
go to SUIM > roles > roles by complexselection criteria>
under the selection according to authorization values give the object's form SU53 screen and press enter it will asks the values for given object pass the values as per the SU53 and execute it will give the list of roles.... capture the roles. The user gets access if you give the any one of the listed roles is assigned, assign the role as per your approval process.
Check with the below link for more assistence:
http://help.sap.com/saphelp_erp2004/helpdata/EN/71/8fba30840c6e4d90da3526971cc684/frameset.htm
Regards,
S.Manu.

How to add results to report from sequence call disabled in report options ?

Hello,
I need to add text to report from a sequence called by a sequence call. The record results option for the sequence call is disabled because the sequence call is normally done thousands of times. Therefore, I don't want to fill in useless text in the report. But, if a certain condition in called sequence fulfills, I would put a text into the report. (Yes, this is related to a sporadic communication problem with the instrument which I want to record into the report.) Which options I have ?
I have attached an example which doesn't add the text from the sequence to the report.
Regards,
Petri
Attachments:
report test.seq ‏45 KB

Hello Ray,
I encounter same behaviour with NONE adapter action step with post-expression as with a statement step as in my first example. With other words, if record results in sequence call in mainsequence is disabled, I cannot get any records into the report.
Attached a modified sequence using NONE adapter action.
Regards,
Petri
Attachments:
report test.seq ‏53 KB

Getting empty pdf from oracle reports

%PDF-1.4
1 0 obj
/Creator(Oracle11gR1 as Reports Services)
/CreationDate(D:20
Above is the content in the pdf when its gettig generated. My project involves multiple locations in the world. This error is happening only in particular location.
Can anyone help me on why this is happening?
Thanks,
Kaushik. G

...from Java and returns an empty result setMy guess would be that something is wrong with your java code.

SM20 report shows empty result

Hi All,
Issue in Audit sm20:
one of the account with special privileges which was set open for doing changes directly in production for a limited time.
When i tried to run an SM20 report to list the actions I did but I get an empty result.Where as able to get other information except that particular user.
Findings:
1.Able to identify transaction used in st03 for that user.
2, logs were returned on that particular date.
3.cheked in sm19 all activities were active.
4.all related parameters were set accordingly.
PLease help me out in finding out the result and to solve the issue

> When i tried to run an SM20 report to list the actions I did but I get an empty result.Where as able to get other information except that particular user.
>
--> I believe you were able to view other users' activities during the same time, but specifically not for one user ?
In case there are many instances in your SAP system, could you check for all instances individually from SM20 ?
Also Security Audit logs cease to write when the audit log max size is achieved / quota for the day is done. Even this is instance specific and hence you need to verify this for the instance to which user logged on.
There are also occurances of Audit logs not being written owing to product error. Could you go through the following SAP Notes , in case the SAP release mentioned in the notes match with that of yours ?
SAP Note 763159 - Security Audit Log: some transaction starts not audited
SAP Note 710138 - Security Audit Log: Transactions are not recorded (3)
SAP Note 317883 - SecAudit: Transactions are not recorded
SAP Note 483953 - Security Audit Log: AU9 and AUA events are not recorded
SAP Note 840798 - SecAudit: Transaction code sometimes missing
cheers !
PRADi

Filter steps with empty results from report

Similar Messages

Maybe you are looking for