Constructing test with multiple results

Hi, I have the question for Lilybyri:
I learn to construct test with multiple results from your article:
Constructing Test with Multiple Results (CP5)
This is exactly what I need. My question is - can I use the radio button interaction or smart shape instead click box? What you recommend? I use CP7 or CP8.
Need to publishing the final test both HTML5 and SWF output. My test wil have 55 questions and 4 results score - one of them describe the personality of learner.
Yarik

Advasntage of click box and shape button is that they can have score
attached to it. That is not the case for radio buttons interaction that has
also limited formatting options.

Similar Messages

Multiple Quizzes with multiple results (in Captivate 6)

Hey guys, Thanks for reading!
Does anyone know if it is possible to do multiple tests with multiple results in captivate 6? or if it is possible to have a pre-test with a quiz, and have separate results for each?
I've been having a play with captivate 6 and when I put a quiz in, it overrides the results slide for my pre-test.
Looking at the results slide master properties I can choose to have results for one of my quizzes but not both (even on separate slides):
It wont even let me insert another slide based on the other result.
I would like to know if multiple quizzes with multiple results is possible in Captivate 6?, or if I am simply doing something wrong?
Thanks!

Sorry for way-late reply...
It's really more how your LMS handles 'courses' and the terminology it uses.
Essentially, most often, a 'SCORM Package' (SCO) is a 'course'. I'd rather call each SCO a 'lesson' as, to me, 'courses' should be setup in the LMS with a series of 'Lessons'.
Regardless of the terminology, each 'SCO' is launched by the LMS and one score can be recorded for it via SCORM.
So if you need multiple final scores recorded, each of those final scores need to be in their own SCO.
A common approach is a Pre-Test SCO (or 'lesson', or 'course', whatever term), a 'Content' SCO perhaps with some interspersed scored interactions, and a Post-Test SCO...all three merged together as a 'course' (or whatever term) within the LMS.
That said, as said, it really all depends on how your LMS handles various SCOs...
Clear as mud?
E

Working with multiple results of a complex query

Hi all!
As I "advance" in learning PL/SQL with oracle, I now get stuck in handling multiple results of a complex query. As far as I know, I cannot use a cursor here, as there is no table where the cursor could point to.
Here is the concept of what I want to do (pseudocode):
foreach result in SELECT * FROM table_1, table_n WHERE key_1 = foreign_key_in_n;
 -- do someting with the resultHere is my attemt, that freezes the browser gui and throws an internal database error:
declare
 type t_stock is record(
 baggage_id baggage.baggage_id%type,
 section_id sections.section_id%type,
 shelf_id shelves.shelf_id%type
 v_stock t_stock;
 rcnt number(2);
begin
dbms_output.put_line(TO_CHAR(rcnt));
loop
 SELECT COUNT(*) INTO rcnt FROM (
 SELECT baggage.baggage_id, sections.section_id, shelves.shelf_id
 FROM baggage, sections, shelves
 WHERE baggage.baggage_id = sections.contained_baggage_id
 AND shelves.is_connex_to_section_id = sections.section_id);
 IF rcnt <= 0 THEN
 exit;
 END IF;
 SELECT baggage.baggage_id, sections.section_id, shelves.shelf_id INTO v_stock
 FROM baggage, sections, shelves
 WHERE baggage.baggage_id = sections.contained_baggage_id
 AND shelves.is_connex_to_section_id = sections.section_id
 AND ROWNUM < 2;
 UPDATE sections SET contained_baggage_id = NULL WHERE section_id = v_stock.baggage_id;
 commit; -- do I need that?
end loop;
END;
/So, is there a way to traverse a list of results from a complex query? Maybe without creating a temporary table (or is that the better way?).
regards, Alex
I reformatted the code
pktm

Ok, here are the details:
The tables are used to model kind of a transport system. There are terminals connected with sections that may contain 1 piece of baggage. The baggage is moved by a procedure through a transport system. After each of these "moving steps", I check if the baggage is in front of the shelf it should be in.
[To be honest, the give statement doesn't contain the info, in which shelf the baggage wil bee inserted. That was spared out because of the lack of a working piece of code :)]
But: if we consider the fact, that a baggage is in front of such a shelf in the way, that it should be put in this shelf, then all this makes some sense.
- move baggae through a transport system
- see if you can put baggage into a shelf
In order to "put baggage in a shelf", I need to remove it from the transport section. As the transport system is not normalized, I need to update the section where the baggage was in.
Uhm... yes it's a task that doesn't make too much sense. It seems to be some kind of general spirit in university homework :)
But: the FOR r IN (Statement) lloks good. I'll use that.
And, the ROWNUM < 2 is used to limit the size of the result to 1, there is no need to have a specific ordering. It's just because - afaik - oracle doesn't have a limit clause. I would appreciate your help if you know a better way to do limit resultsets.
best regards, Alex

Oracle 8.1.6 Thin Driver with Multiple Result Sets

We're using Oracle 8.1.6 on NT using the latest driver release.
Java 1.2.2
We're experiencing problems with resultSet.next when we have multiple result sets open. What appears to be happening when you've read the last result set entry do a .next() call which should result in a false value we actually get java.sql.SQLException: ORA-01002: fetch out of sequence.
This seems to us that the driver is trying to go beyond the end of the result set.
We've checked JDBC standards (and examples on this site) and the code we've got is compliant. We've also found that the code produces the correct results under Oracle 7.3.4 and 8.0.4.
I can also say that there is no other activity on the db, so there are no issues such as roll back segments coming into play.
Any solutions, help, advice etc would be gratefully appreciated!
null

Phil,
By "multiple result sets open", do you mean you are using REF Cursors, or do you have multiple statements opened, each with its own ResultSet? If you could post an example showing what the problem is, that would be very helpful.
You don't happen to have 'for update' clause in your SQL statement, do you?
Thanks

Display a query with multiple results and a little addon :D

Hello everybody,
I wanna make a JSP page that displays multiple results from a query.
I wanna those results to appair in a table, a row each one, and also a little "square radio form buttton" that makes me select rows I wanna delete (with another button at the end)
any idea?
Better if you post the code, I'm not a good JSP writer
thanks everybody for your attention and your time
Kind regards

You're right.. I'd post nothing..
But it's all still in progress and I don't know what to post..
I understand is really difficult to invent some code without an origin (variables, functions, the bean), but also some general info would be really appreciated,also making a streched example if you can..
REQUESTS:
1) I need make a new JSP page, where will be visualize rows returned from a precise query selection
2)I use Beans, and my idea was to create Bean in JSP, open connection, make the query and create "some kind of FOR cycle" that fills a table, row by row
3)Every row must got a little "radio button" for a delete selection; the delete function will start when I press a specific button in this page(i'll use a servlet for this function)
4)The biggest and important trouble is HOW to display multiple rows in the Table

Stored Procedure With Multiple Result Sets As Report Source : Crosspost

Hello Everyone,
I have an issue where i have created a stored procedure that returns multiple result sets
/* Input param = @SalesOrderID */
SELECT * FROM Orders TB1
INNER JOIN OrderDetails TB2 ON TB1.ID = TB2.ID
WHERE TB1.OrderID = @SalesOrderID
SELECT * FROM Addresses
WHERE Addresses.OrderID = @SalesOrderID AND Addresses.AddressType = 'Shipping'
SELECT * FROM Addresses
WHERE Addresses.OrderID = @SalesOrderID AND Addresses.AddressType = 'Billing'
This is just a quick sample, the actual procedure is a lot more complex but this illustrates the theory.
When I set the report source in Crystal X to the stored procedure it is only allowing me to add rows from the first result set.
Is there any way to get around this issue?
The reason that I would prefer to use a stored procedure to get all the data is simply performance. Without using one big stored procedure I would have to run at least 6 sub reports which is not acceptable because the number of sub reports could grow exponentially depending on the number of items for a particular sales order.
Any ideas or input would be greatly appreciated.
TIA
- Adam
P.S
Sorry for the cross post, I originally posted this question [here|/community [original link is broken];
but was informed that it might be the wrong forum
Edited by: Adam Harris on Jul 30, 2008 9:44 PM

Adam, apologies for the redirect, but it is better to have .NET posts in one place. That way anyone can search the forum for answers. (and I do not have the rights to move posts).
Anyhow, as long as the report is created, you should be able to pass the datasets as:
crReportDocument.Database.Tables(0).SetDataSource(dataSet.Tables("NAME_OF_TABLE"))
Of course alternatively, (not sure if this is possible in your environment) you could create a multi-table ADO .NET dataset and pass that to the report.
Ludek

Problems with Multiple Numeric Limit Test

Hi,
I'm trying to use the MultipleNumeric Limit test and I have problems with it
1) Since I use TestStand 3.1, is it recommended to uses the new type template rather than the legacy one?
2) When you let TestStand creat the test code for you it gives you the following:
// The following code shows how to access a property or variable via the TestStand ActiveX API
// To use this code you must add a parameter "struct IDispatch *seqContextDisp" to this function
// and pass a sequence context to it.
// tsErrChk(TS_PropertyGetValNumber(seqContextCVI, &errorInfo,
// "Step.Result.Measurement[0].Limits.Low", 0, &lowLimit0));
I would appriciate if anybody can show me an example using that. I just don't understand it!!
Cant't I just pass the seuence context parameter as follow: 'CAObjHandle seqContextCVI' ?

I am using Testand 3.2
Most of my tests have a single result value.
However, Some require more than one result value (i.e two).
I would like to specify a "multiple result test step", and assign limits to each result.
So far I can only find silly solutions to this problem:
1. Feed in teststand reference into my test.
2. Use active X !??
3. Create custom local variable array and then test each result in post tests..
The above solutions are dumb.
Can someone provide a proper solution to creating a test step with multiple results.
Thank you.

With multiple tabs open, crashing with no warning to close tabs and no crash report. Just bye-bye.

I have the option to warn me before closing multiple tabs selected. I left my desk for an hour with multiple windows open. When I returned, all but 1 window disappeared. I was typing on Facebook with multiple tabs open and instantly all tabs and windows disappeared without warning. No crash report either. I search for the keyboard shortcut to close a window (Alt+Spacebar+C). I tested with multiple tabs open, no warning - just instantly closed. I do not think I hit these keys by accident and I would like an option for a warning with one tab open or multiple tabs.

Ok I solved the problem if anyone is looking at this.
Add on "Hide Caption Title bar Plus" was the offender
Option - define option for close button. Was on recommended not default.
Choose default, problem eliminated!
Andy

Help with streaming result sets and prepared statements

hi all
I create a callable statement that is capable of streaming.
statement = myConn2.prepareCall("{call graphProc(?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?)}",java.sql.ResultSet.TYPE_FORWARD_ONLY,
java.sql.ResultSet.CONCUR_READ_ONLY);
statementOne.setFetchSize(Integer.MIN_VALUE);
the class that contains the query is instantiated 6 times the first class streams the results beautifully and then when the second
rs = DatabaseConnect.statementOne.executeQuery();
is executed I get the following error
java.sql.SQLException: Can not use streaming results with multiple result statements
at com.mysql.jdbc.SQLError.createSQLException(SQLError.java:910)
at com.mysql.jdbc.MysqlIO.readAllResults(MysqlIO.java:1370)
at com.mysql.jdbc.MysqlIO.sqlQueryDirect(MysqlIO.java:1688)
at com.mysql.jdbc.Connection.execSQL(Connection.java:3031)
at com.mysql.jdbc.PreparedStatement.executeInternal(PreparedStatement.java:943)
at com.mysql.jdbc.PreparedStatement.executeQuery(PreparedStatement.java:1049)
at com.mysql.jdbc.CallableStatement.executeQuery(CallableStatement.java:589)
the 6 instances are not threaded and the result set is closed before the next query executes is there a solution to this problem it would be greatly appreciated
thanks a lot
Brian

Database resources should have the narrowed scope
possible. I don't think it's a good idea to use a
ResultSet in a UI to generate a graph. Load the data
into an object or data structure inside the method
that's doing the query and close the ResultSet in a
finally block. Use the data structure to generate
the graph.
It's an example of MVC and layering.
Ok that is my bad for not elaborating on the finer points sorry, the results are not directly streamed into the graphs from the result set. and are processed in another object and then plotted from there.
with regards to your statement in the beginning I would like to ask if you think it at least a viable option to create six connections. with that said would you be able to give estimated users using the six connections under full usage.
just a few thoughts that I want to
bounce off you if you don't mind. Closing the
statement would defeat the object of of having a
callable statement How so? I don't agree with that.
%again I apologise I assumed that since callable statements inherit from prepared statements that they would have the pre compiled sql statement functionality of prepared statements,well If you consider in the example I'm about to give maybe you will see my point at least with regards to this.
The statement that I create uses a connection and is created statically at the start of the program, every time I make a call the same statement and thus connection is used, creating a new connection each time takes up time and resources. and as you know every second counts
thanks for your thoughts
Brian.

Web services with multiple elements in the results

We are using ASP.Net and LiveCycle Forms with LiveCycle Designer 7.0. LiveCycle forms is running on JBOSS (turnkey installation). Our problem is that if the web service returns multiple results e.g.
 £12.99
 Widget
 £0.99
 Grommett
The form does not grow to accommodate the extra results. Has anyone had any experience of this issue. Adobe say it can be done but so far we have had no luck.

<[email protected]> ha scritto nel messaggio news:[email protected].. > We are using ASP.Net and LiveCycle Forms with LiveCycle Designer 7.0. > LiveCycle forms is running on JBOSS (turnkey installation). Our problem is > that if the web service returns multiple results e.g. > <products> > <product> > <price>£12.99</price> > <description>Widget</description> > </product> > <product> > <price>£0.99</price> > <description>Grommett</description> > </product> > </products> > The form does not grow to accommodate the extra results. Has anyone had > any experience of this issue. Adobe say it can be done but so far we have > had no luck. You have to create a subform that has flow content, then flag "repeat the subform for each data item" (or something similar, I've not Designer installed on this machine). Remember to save as dynamic PDF. Bye, Alessio

How can I copy test plan WITH ITS RESULTS (PASS/FAIL) to other project in MTM??

How can I copy test plan WITH ITS RESULTS (PASS/FAIL) to other project in MTM??

Hi odedn,
Thank you for posting in MSDN forum.
Based on your issue, you mean that you want to copy the test plan with test results from the current team project
to other team project, am I right?
If yes, as far as I know that when we copy test plan with test results to other team proejcts. It is default that
there just will not copy the test plan with test results (pass/fail) to other team project in MTM.
You can refer the following MSDN document’s
what gets cloned, it explained that which objects are copied from the source test plan to the destination test plan.
Reference:
http://msdn.microsoft.com/en-us/library/hh543843.aspx
If you still want to this feature, I suggest you can
submit this feature request:
http://visualstudio.uservoice.com/forums/121579-visual-studio. The Visual Studio product team is listening to user voice there. You can send your idea there and people can vote. If
you submit this suggestion, I hope you could post that link here, I will help you vote it.
Thanks for your understanding.
Best Regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

How do i test split by value functionality in mesage mapping with multiple

how do i test split by value functionality in mesage mapping with multiple values ?
regards,
venkat

repeat your source node. in mapping editor you can view queues by right clicking to mapped element.. selecting Display Queues option.. this will show u your values .
You can also select this Display Queue option for splitByValue option
for example
source--->splitByValue>target
Try viewing your queues to each this step... for splitByValue in display Queue you will see context inserted(grey colour) accodingly

Multiple numeric test with cluster from labview?

Is it possible to make a multiple numeric limit test with the values from a cluster from a labview vi?
Solved!
Go to Solution.

This can be done with a little work.
The first step is to get the cluster's data back in to TestStand's memory space as you would do normally.
Then you either use post expressions (since you're at a point in time between the test code module completing and the status evaluation) to move the pertinent parts in to the data source for the step (usually step.numericarray) or...
http://zone.ni.com/reference/en-XX/help/370052K-01/tsref/infotopics/test_step_types_mnl_test/
And
http://zone.ni.com/reference/en-XX/help/370052K-01/tsref/infotopics/pane_mnl_datasource/
Use the 'specify data source for each measurement''.
I'm not in front of a computer with TestStand right now to knock up an example but it should be pretty straight forward.
Either method should allow you to work with a mixed cluster of data types and just evaluate on the numeric ones.
Thanks
Sacha
// it takes almost no time to rate an answer

How do I test a website with multiple users?

Hello,
I want to test a website with multiple users. Is there a testing tool that can simulate
multiple users?
I have already written some HTTPUnit tests and it would be cool to use these tests in
a "multiple user test". Is there any way to reuse the HTTPUnit tests in a "multiple user
test"?

Take a look at JMeter "http://jakarta.apache.org/jmeter"
And if your web app uses session variables.....use "BadBoy"
http://www.badboy.com.au/

Spatial Query with multiple geometries from 2 tables

Hi,
I'm using Oracle 8.1.7. I am trying to do a spatial query on two tables with multiple geometries. There are two spatial tables. One made up of points and one made up of polygons. There are 829551 rows in the table of points and 1817795 rows in the table with polygons...
I want to find all polygons where one of this points is within it...
This query is pretty intensive querying two large spatial tables against each other and so I need to find the most efficient way of running this query. I've been running variations of my query for the last two week and every time it's bombed out with various errors after 12-24 hrs processing like out of memory, out of tablespace, out of processing, invalid index etc etc etc. I need to get this query run asap... Any tips would be gratefully appreciated..
For the session running the query I've allocated 16M sort area with
ALTER SESSION SET SORT_AREA_SIZE=16777216;
Below is the query I'm running... How can I improve this please? BTW PARCEL_OVERLAPS contains the points and TP$_PARCEL_AREAS the polygons.
SELECT lu.LNU_PARCEL_ID
     FROM
          seventy.PARCEL_OVERLAPS po,
          imap_topol.TP$_PARCEL_AREAS pa,
          TP$_PARCEL_CENTROID_AREA pca,
          TDCR_LAND_UNIT lu
     WHERE
          SDO_FILTER(po.geometry, pa.area,
          'querytype=WINDOW') = TRUE and
          sdo_within_distance(po.geometry,pa.area,'distance=0')='TRUE' and
          pa.delete_date is null and
          Lu.LNU_LAND_UNIT_UNIQUE_NUM = pca.CENTROID_ID and
          pa.AREA_ID = pca.AREA_ID and
          pca.DELETE_DATE IS NULL and
          pa.DELETE_DATE IS NULL;

Albert,
Thanks for your reply and the tips you've given. The tp$_parcel_areas table will always be bigger so I've changed the order to sdo_within_distance(pa.area,po.geometry,'distance=0')='TRUE'. The requested counts for those queries are
12:26:29 [email protected]:SQL> select count(*)
13:46:22 2 from seventy.PARCEL_OVERLAPS;
COUNT(*)
612
13:48:12 [email protected]:SQL> select count(*)
13:48:17 2 from imap_topol.TP$_PARCEL_AREAS pa,
13:48:21 3 TP$_PARCEL_CENTROID_AREA pca
13:48:21 4 where pca.DELETE_DATE IS NULL
13:48:21 5 and pa.DELETE_DATE IS NULL
13:48:21 6 and pa.AREA_ID = pca.AREA_ID;
COUNT(*)
1310665
There was no reason for both filter and within_distance. I did try use the anyinteract but for some reason that does not return the desired results(I've added one id row as a test to make sure it returns desired results). Plus Oracle have recomended using the within distance for better performance..
so the explan plan for
14:38:37 [email protected]:SQL> EXPLAIN PLAN FOR
14:38:50 2 SELECT lu.LNU_PARCEL_ID
14:38:50 3 FROM
14:38:50 4 seventy.PARCEL_OVERLAPS po,
14:38:50 5 imap_topol.TP$_PARCEL_AREAS pa,
14:38:50 6 TP$_PARCEL_CENTROID_AREA pca,
14:38:50 7 TDCR_LAND_UNIT lu
14:38:50 8 WHERE
14:38:50 9 sdo_within_distance(pa.area,po.geometry,'distance=0')='TRUE' and
14:38:50 10 pa.delete_date is null and
14:38:50 11 Lu.LNU_LAND_UNIT_UNIQUE_NUM = pca.CENTROID_ID and
14:38:50 12 pa.AREA_ID = pca.AREA_ID and
14:38:50 13 pca.DELETE_DATE IS NULL and
14:38:50 14 pa.DELETE_DATE IS NULL;
is
Plan Table
| Operation | Name | Rows | Bytes| Cost | Pstart| Pstop |
| SELECT STATEMENT | | 4G|32920G| 547M| | |
| NESTED LOOPS | | 4G|32920G| 547M| | |
| MERGE JOIN | | 547M| 2029G| 230124 | | |
| SORT JOIN | | 1M| 36M| 85014 | | |
| MERGE JOIN | | 1M| 36M| 50019 | | |
| SORT JOIN | | 1M| 17M| 21650 | | |
| TABLE ACCESS FULL |TP$_PARCE | 1M| 17M| 485 | | |
| SORT JOIN | | 1M| 22M| 28369 | | |
| TABLE ACCESS FULL |TDCR_LAND | 1M| 22M| 2127 | | |
| SORT JOIN | | 42K| 160M| 145111 | | |
| TABLE ACCESS FULL |TP$_PARCE | 42K| 160M| 12697 | | |
| TABLE ACCESS FULL |PARCEL_OV | 817 | 3M| 1 | | |
14:43:14 [email protected]:SQL> explain plan for
14:43:23 2 SELECT pa.AREA_ID
14:43:23 3 FROM seventy.PARCEL_OVERLAPS po,
14:43:23 4 imap_topol.TP$_PARCEL_AREAS pa
14:43:23 5 WHERE SDO_RELATE(po.geometry, pa.area,'mask=ANTINTERACT querytype=WINDOW') = 'TRUE'
14:43:23 6 and pa.DELETE_DATE IS NULL;
Plan Table
| Operation | Name | Rows | Bytes| Cost | Pstart| Pstop |
| SELECT STATEMENT | | 6M| 50G| 10M| | |
| NESTED LOOPS | | 6M| 50G| 10M| | |
| TABLE ACCESS FULL |PARCEL_OV | 817 | 3M| 1 | | |
| TABLE ACCESS FULL |TP$_PARCE | 850K| 3G| 12697 | | |
14:45:03 [email protected]:SQL> explain plan for
14:45:04 2 SELECT pa.AREA_ID
14:45:05 3 FROM seventy.PARCEL_OVERLAPS po,
14:45:05 4 imap_topol.TP$_PARCEL_AREAS pa
14:45:05 5 WHERE SDO_RELATE(pa.area, po.geometry,'mask=ANTINTERACT querytype=WINDOW') = 'TRUE'
14:45:05 6 and pa.DELETE_DATE IS NULL;
Plan Table
| Operation | Name | Rows | Bytes| Cost | Pstart| Pstop |
| SELECT STATEMENT | | 6M| 50G| 863554 | | |
| NESTED LOOPS | | 6M| 50G| 863554 | | |
| TABLE ACCESS FULL |TP$_PARCE | 850K| 3G| 12697 | | |
| TABLE ACCESS FULL |PARCEL_OV | 817 | 3M| 1 | | |
--------------------------------------------------------------------------------

Constructing test with multiple results

Similar Messages

Maybe you are looking for