Filtering based on stacks

Is there a way to set a filter to only show images that either have multiple versions from the same master, or images that have been stacked? I can't seem to find this filter, or figure this out.
Mac

Kirby Krieger wrote:
There is also no built-in way to select an image and from that select (or otherwise group) all Versions with the same Master. This seems to be an oversight (perhaps it costs to many cycles).
The filename will do just that. Again all version from the same master have the same filename. Even if you rename the master what ever the last name given the master will be used by all its versions
Here's a screenshot of 8 versions of an image and the filter settings that gathered them.
In fact by making the filter *starts with* and leaving off the extension it also captured on the file I did with an external editor, the PSD file.
I must be missing something because this is exactly what the OP wanted.
Is there a way to set a filter to only show images that either have multiple versions from the same master,

Similar Messages

  • Content filters based on Group Best Practice

    What is best practice for Content filters based on Group.
    What we wanna accomplish.
    We have few groups but i'll make an example on two.
    We have one group that have allowed "Media" and another group that have allowed "Exe".
    What is best practice if one user is in both group.
    How would you do Content filtering?
    I dont see in Content filtering condition
    if (Envelope Recipient does not mach group) then Block.
    Is the best way to create first?
    If (attachment.type="Media") then (insert header="sometext);
    and after in Content filter below
    if (Envelope Recipient) and (Header does not contain "sometext") then Block.

    Hi,
    I understand that I will have to use BPM. What is the best way?

  • Automating video filters based on audio changes?

    Hello,
    I'm wondering if there is a non-manual way to automate the parameters of video filters based on increases and decreases in audio track
    I'm aware that filter parameters can be modified by hand using keyframes and curves, I'm just wondering if there is someway to have the software make these modifications based on changes in an audio track (or any other parameter).
    Thanks,
    T

    You need Motion …
    Here demo Mark&Steve, how audio manipulates a text.
    https://youtu.be/m7WTBbx9VNI
    You'll find many mor, all demo, how audio can be used to manipulate other values of objects.

  • Creating MTA filters based on subject

    hi,
    Could anyone help me out in creating MTA filter for bolcking mails based on subject of an email.In the documentation it says you have to do it using seive lang .If you have a sample template pls provide.
    rgds
    rajeev nair

    please read RFC3028��Sieve: A Mail Filtering Language,
    you can find many examples

  • Smart Folders and Filtering based on Focal Length

    Can we please be given the ability to create Smart Folders and be able to Filter images based on focal length?
    Doing so based on Lens alone does not take into account that more and more people rely on zoom lenses. When you have 16-35, 27-70, 35-135 and 70-200 lenses, one could benefit from having the ability to search for images created in wide-angle, normal, zoom and tele-zoom ranges.
    Providing this feature would be greatly appreciated.
    Regards, JML

    Thanks Colin, I will try it.
    Sounds like it may work - however bit awkward solution in otherwise ergonomic LR environment :-(
    I really do not understand why this value is not among the filtering metadata when LR recognizes it and shows it on every corner. Especially considering the fact LR is supposed to be full WF solution and certain development settings cannot be effectively applied without selecting images only with certain focal length values.
    The very last feature I am missing on this SW designed to cover entire WF (since LR1) is the distortion/perspective control and ability to apply corrections based on lens/focal length used.
    b Does anyone have an idea if Adobe plans to eventually implement this feature?
    I do not want to be forced to use DxO which always means interruption of the WF and inevitably generated new files on disk.

  • XNET CAN filtering based on payload information of different frames

    Dear all,
    The CAN frames I recieve per cycle are with the following identifiers: 
    [1 frame] 513 (Radar status- range, elevation, target type)
    [1 frame]1536 (Target status - No of targets near field from byte 1 and No of targets far field from byte 2)
    Followed by 96 message pairs of which 1-32 pairs are for near field and 33-96 are for far field.
    1793 (Target Info 1)
    1794 (Target Info 2)
    For the filter, I need to to identify the 1536 frame first and read byte 1 and byte 2 which gives me information about the number near and far targets respectively. 
    Then I need to pick (equal to byte1) number of message pairs from the first 32 pairs and retrieve sigals from that; and then pick (equal to byte2) number of message pairs from then next 64 message pairs and retrive signals. 
    As this plots only the targets that are valuable. I am also looking to create more efficient projects that can be scaled to multiple radars. Any tips for efficient documentation would be much appreciated.
    Kind Regards,
    Red
    Attachments:
    MainRadar.vi ‏129 KB
    radar-.dbc files.zip ‏5 KB

    Hello Red,
    I saw your code. you need do some modifications.
    1. your using STOP vi in ForLoop. when it's true then it will stop your main VI completely. It's like abort button. Instead of that right click on forloop and select Stop terminal.
    2. your passing two index arrays to Forloop (CAN Frames & Search ID Array). if your giving like this, it will always executes based on least array index. So suppose you have 100 frames then it will runs up to 7 times (because your array have 7 elements)
    3. why are taking index from foorloop and again using other loop with Shift registers?  you can take last value directly from your 1st FoorLoop. Right click on the Tunnel and Select Last element.
    4. In your VI, your always clearing your XNET reference. Suppose CAN Frame is not present in next iteration then it wont take previous value. it will give you default value (max- 0)
    Munna

  • Ho to count the total number of rows Sql Reporting Services Report Builder's Dataset after filteration based on parameter

    Hi to all,
                 I have parameter and data-set i.e consists of SharePoint List items,Data-set get's  filters and I need to count the total rows of the data-set i.e I get after filtration.
    Thanks, Quality Communication Provides Quality Work. Mohammad Siddiqali.

    Hi siddiqali,
    Thanks for the question and Destin Joy’s reply. Please try to add the filter in the dataset level rather than the data region
    level. Detail steps as below.
    1.      
    Double-click the dataset name in the Report Data window, click Filters in the left panel.
    2.      
    Click Add button, choose Admission Date in the Expression drop-down list. Type in the Value textbox with the parameter name: @selectDate.
    3.      
    Right-click the cell that your identified by the red circle, select Expression, type in it with:
    =CountRows("DataSetName")
    Thanks,
    Sharp Wang
    Please remember to mark the replies as answers if they help you and unmark them if they provide no help.

  • Digital Signature Filteration based on Profiles

    Hi,
    Problem : Instead of using theSignature Field and hardcoding the signature issuer profile (eg : cn=TEST), I have a javascript code written in the button which pops-up the digital signature window where all the signatures are displayed in the combo. I need to filter out only those digital signature which belongs to a particular profile.
    I have attached the PDF for your reference. Please provide me the javascript code which can filter the signatures based on the profiles. Let me know if you require any more clarification for the same.
    Regards
    Mahesh Pillay
    [email protected]

    Steve,
    Thanks for your reply...
    I had tried with the seed value but unfortunalty could not find the correct syntex/code for setting the seed value in my javascript code.
    Appreciate if could provide me the code , since i am not an expert in javasceript and i am trying this for a very long time...
    Thanks in advance...
    Regards
    Mahesh Pillay

  • Does anyone know how to associate user-assigned keywords with apps so that they can be searched/ filtered based on the keywords?

    I have a large number of apps that exceed the capacity of my multiple idevices and I want to be able to create app lists (similar to playlists) so I can change what goes onto my idevices quickly depending on what is going on. Individually picking apps in itunes each time is time-consuming so I was wondering if there was a way to associate tags or user-assigned keywords to apps so they could be filtered/ searched to select the ones I want.

    I have a large number of apps that exceed the capacity of my multiple idevices and I want to be able to create app lists (similar to playlists) so I can change what goes onto my idevices quickly depending on what is going on. Individually picking apps in itunes each time is time-consuming so I was wondering if there was a way to associate tags or user-assigned keywords to apps so they could be filtered/ searched to select the ones I want.

  • Business Rule - Filtering based on dimension

    Hi,
    I am trying to copy data from one scenario/version to another scenario/version based on account member(smartlist) value.I am currently unable to achieve this result.
    /* Copy the data from Begin Scenario to Final Scenarioo
    based on the vendor status*/
    FIX(@Relative(Year))
    "Begin Scenario"
    IF (("Vendor Status" == [[VENDOR_STATUS.NEW]]) OR
    ("Vendor Status" == [[VENDOR_STATUS.ACTIVE]]) OR
    "Begin Scenario"->"Working Version" = "Final Scenario"->"Working Version";
    ENDIF
    ENDFIX
    In this example,"Vendor Status" is an account member of the type smartlist. I would like to filter data based on "Vendor Status" as I copy from
    one scenario/version to another scenario/version. The above rule is not copying any data.
    Kindly advice.
    Thanks,
    Cz

    Hi,
    Try out the following way
    FIX(@Relative(Year,0))
    "Begin Scenario"
    IF (("Vendor Status" == 1) OR
    ("Vendor Status" == 2) OR
    "Begin Submission"->"Working Version" = "Final Scenario"->"Working Version";
    ENDIF
    ENDFIX
    /* Assuming Smart List Value of Vendor_Status.New=1 & Vendor_Status.Active=2 */
    As in backend ( i.e Essbase) the smart list values are stored in numerical.
    Cheers!!

  • Workbook is not filtering based on Exit Variable during refresh

    Hi,
    I have a workbook with a query embedded in it. While opening the workbook it is not refreshing the variable using the value from the user exit.  While I am executing the query it is working properly.
    In workbook "Refresh Workbook on Open" is selected.
    Query is working with following exit code (both step 1 & 2)
      WHEN 'ZEXTICK_DT_YD'.                    "Yesterday based on system date
        IF i_step = 1.
          l_date = sy-datum - 1.
          l_s_range-low       = l_date.
          l_s_range-sign      = 'I'.
          l_s_range-opt       = 'EQ'.
          APPEND l_s_range TO e_t_range.
        ENDIF.
    We are in BI 7 and Support pack 15.
    Thanks in advance
    nisha

    Hello,
    I having a similar kind of issue with the exit, that doesnt work with a refresh but works perfectly as such. Did you figure out a way to make it work with refresh? If so, would appreciate if you share with us the solution.

  • Filtering based on the value in a Input Box?

    Is it possible to filter a gallery based on something I enter into an input box?
    If so what is the syntax for the command I need?
    Right now I am trying Filter(UF_Football_Roster, Number =) and then I have no idea what to put after the equals sign.
    Thanks for the help!

    Hi Philip,
    Yes. Assuming Number is a column in the table_UF_Football_Roster, and assuming you added an input text visual named InputText1, here is the syntax:
    Filter(UF_Football_Roster, Number = InputText1!Text)
    If the value in the Number column are stored as numbers you may need to use the function
    Value:
    Filter(UF_Football_Roster, Number = Value(InputText1!Text))

  • Data filtering based on other Field

    Hi,
    Hi,
    i am creating ADF 10g Form based on the Web service data control. on the form a InventoryItem Drop Down List and a Serial Number Drop Down List. if i select a Inventoryitem item from the list i have to get the serial numbers in the serialnumber dropdown list based on the selected inventory item. can any one tell me how can i achieve this ....
    as i am using Web service Data Control method for dragging the method.. the wsdc and viewObjects DataControl created from Model Jpr does not have any link. here how we have to link both the above fields if i use the Dependent List
    Edited by: Naveenapps on Sep 11, 2009 1:14 AM

    Hi
    Can you explain in a bit more detail on what the webservice is doing ? Is the inventory item a parameter to a web service method that returns the serial numbers ? Or is it that the Inventory is comming from the BC4J data control and you want a selection in that list to be passed as a parameter to a WSDC method ?
    Thanks
    Vinay.

  • Data filtering based on validation for SAP MDM

    Hi Experts,
    My requirement is to filter data coming in to MDM via PI so that only those records are posted to MDM which pass that logic.
    I guess validation in PI can filter data based on logic defined.
    Please guide me how to achieve this.
    Thanks,
    Ravi

    refer below link and write a condition in receiver determination and select ignore message option(when no receiver found).
    http://wiki.sdn.sap.com/wiki/display/XI/XpathConditioninReceiverDetermination
    Regards,
    Raj

  • Power Query filters based on UserID

    I have a sales dashboard built with Power Query, Power Pivot, Power View and Power Maps that I need to filter based on the user that opens the dashboard. Users in ABCD territory, should see sales data for ABCD sales, but should not see sales from ZYXW territory.
    We do this all the time in SSRS using User!UserID as a parameter passed into a stored procedure, but I am not familiar with what function within Power Query would pass the user ID as a parameter into the stored procedure.
    Any help would be greatly appreciated.

    I have solved this limitation by automatically producing one file per user on the dashbord. This also reduce the amount of data per user so the response is fast.
    In the database MS SQL there are a number of "temporary" tables which are sources to the Power Pivot
    database. Those tables are loaded with subsets of data per user and the database is refresh and published
    on the dashbord (Power View). The tables are loaded by stored procedures with the users ID as parameter. Programmed with VBA. No SharePoint in this case.
    Gosta Munktell

Maybe you are looking for