"Filtering exceed maximum allocated time" error in crawl log

A crawler log contained the following error. Is this error related to the Crawler Configuration "Crawler Timeout Threshold (seconds)" parameter? (Mine is set to *30* seconds.)
"Filtering exceed maximum allocated time *108* seconds; process killed. exit with status 1 without any error message"

No, they are unrelated. Filtering is the process of converting formatted (eg, Word, PDF) docs into indexable text. If it exceeded 108 seconds the process had almost certainly hung, which most likely indicates a corrupt file.

Similar Messages

ORA-02399: exceeded maximum connect time, you are being logged off

What could have been the cause of "ORA-02399: exceeded maximum connect time, you are being logged off"? I am always getting that issue even if I am continously doing some query.

There's a resource limit active (RESOURCE_LIMIT=TRUE in pfile/spfile) and a user_profile (which limits the connection time) dedicated to the user.

Error in crawl log "Error while crawling LOB contents. ( Error caused by exception: Microsoft.BusinessData.Infrastructure.BdcException The shim execution failed unexpectedly - The method or operation is not implemented..; SearchID "

Hi
I get the following error in my crawl logs
"Error while crawling LOB contents. ( Error caused by exception: Microsoft.BusinessData.Infrastructure.BdcException The shim execution failed unexpectedly - The method or operation is not implemented..; SearchID "
Because of this i suspect, the search results are not including those aspx pages marked as "Hide physical urls from search".
This error is not available in the another environment where the aspx pages are coming in the results.
Thanks
Joe

Hi Joe,
Greetings!
Reset the index and re-crawl. That usually clears it
If you are using NTLM authentication, then make sure that you specified the PassThrough authentication for crawling
Probably you need to debug the BDC code that underlies the external content types.
http://social.technet.microsoft.com/Forums/sharepoint/en-US/41a86c43-151d-47cd-af73-967a4c940611/lotus-notes-connector-error-while-crawling-lob-contents?forum=sharepointsearch
Please remember to click 'Mark as Answer' on the answer if it helps you

Run time Error DBIF_RSQL_SQL_ERROR while logging and executing some tcodes

Hi all,
Hi all,
When i try to login into my system (ECC 6.0 with Oracle DB), i have been directed to dump -->
Runtime Errors DBIF_RSQL_SQL_ERROR
Except. CX_SY_OPEN_SQL_DB
Short text
SQL error in the database when accessing a table.
Missing RAISING Clause in Interface
Program SAPFSDS1
Include FSDS1E01
Row 365
Module type (FORM)
Module Name TRANSFORM_NEW_OLD
Trigger Location of Exception
Program SAPFSDS1
Include FSDS1E01
Row 380
Module type (FORM)
Module Name TRANSFORM_NEW_OLD
In the source code the the cause for the error is shown in the below line"
SELECT SINGLE * FROM TDCLD
WHERE DOKCLASS EQ DOKCLASS.
"How to correct the error"
Database error text........: "ORA-32255: Message 32255 not found;
product=RDBMS; facility=ORA#"
Internal call code.........: "RSQL/READ/TDCLD "
Please check the entries in the system log (Transaction SM21).
If the error occures in a non-modified SAP program, you may be abl
find an interim solution in an SAP Note.
If you have access to SAP Notes, carry out a search with the follo
keywords:
"DBIF_RSQL_SQL_ERROR" "CX_SY_OPEN_SQL_DB"
"SAPFSDS1" or "FSDS1E01"
"TRANSFORM_NEW_OLD"
When i tried to look for the error ORA-32255, i am unable to get any information regarding this?
Could you please suggest me..
I have made the following changes trying to solve the error:
shared_pool_size = 401832601 and
i have executed sql command --> alter system set "_object_statistics"=false scope=spfile;
Message from Alert Log file:
Incremental checkpoint up to RBA [0x1076.10c61.0], current log tail at RBA [0x1076.10e4d.0]
Message from dev_w0 file:
OCI-call failed with -1=OCI_ERROR
C SQL error 32255: 'ORA-32255: Message 32255 not found; product=RDBMS; facility=ORA
C '
C *** ERROR => Error 32255 in stmt_fetch() from oci_execute_stmt(), orpc=0
[dbsloci.c 12720]
C *** ERROR => ORA-32255 occurred when executing SQL stmt (parse error offset=0)
[dbsloci.c 12739]
C sc_p&H05B11F10,no&H110,idc_p&H00000000,con=0,act=1,sle n&H103,smax&H256,#vars=2,stmt
8718D8,table=ATAB
C SELECT "TABNAME" , "VARKEY" , "DATALN" , "VARDATA" FROM "ATAB" WHERE "TABNAME" = :A0 AND "VARKEY" = \
C :A1;
C sc_p&H05B11F10,no&H110,idc_p&H00000000,con=0,act=1,sle n&H103,smax&H256,#vars=2,stmt
8718D8,table=ATAB
C prep=0,lit=0,nsql=0,lobret=0,#exec=1,dbcnt=0,upsh_p &H00000000,ocistmth_p
872784
C IN : cols=2,rmax=1,xcnt=0,rpc=0,rowi=0,rtot=0,upto=-1,rs ize&H28,vmax&H32,bound=1,iobuf_p&H05BF4F28,vda_p
873CA8
C lobs=0,lmax=0,lpcnt=0,larr&H00000000,lcurr_p&H0000000 0,rret=0
C OUT: cols=4,rmax=1,xcnt=1,rpc=0,rowi=0,rtot=0,upto=-1,rs ize&H124,vmax&H32,bound=1,iobuf_p&H05BEBAF8,vda_p
874118
C lobs=0,lmax=0,lpcnt=0,larr&H00000000,lcurr_p&H0000000 0,rret=0
C SELECT "TABNAME" , "VARKEY" , "DATALN" , "VARDATA" FROM "ATAB" WHERE "TABNAME" = :A0 AND "VARKEY" = \
C :A1;
B ***LOG BY4=> sql error 32255 performing SEL on table ATAB [dbtran#11 @ 7512] [dbtran 7512 ]
B ***LOG BY0=> ORA-32255: Message 32255 not found; product=RDBMS; facility=ORA
[dbtran#11 @ 7512] [dbtran 7512 ]
B dbtran ERROR LOG (hdl_dbsl_error): DbSl 'SEL'
B RSLT: {dbsl=99, tran=1}
B FHDR: {tab='ATAB', fcode&H17, mode=2, bpb=0, dbcnt=0, crsr=0,
B hold=0, keep=0, xfer=0, pkg=0, upto=0, init:b=0,
B init:p&H00000000, init:#=0, wa:p=0X031902F0, wa:#&H15000}
B dbtran ERROR LOG (hdl_dbsl_error): DbSl 'SEL'
B STMT:
B CRSR: {tab='', id=0, hold=0, prop=0x80000, max.in@0=1, fae:blk=0,
B con:id=0, con:vndr=5, val=2,
B key:#=2, xfer=0, xin:#=1, row:#=0, upto=1, wa:p=0X031902F0}
A TH VERBOSE LEVEL FULL
A ** RABAX: level LEV_RX_PXA_RELEASE_MTX entered.
A ** RABAX: level LEV_RX_PXA_RELEASE_MTX completed.
A ** RABAX: level LEV_RX_COVERAGE_ANALYSER entered.
A ** RABAX: level LEV_RX_COVERAGE_ANALYSER completed.
A ** RABAX: level LEV_RX_ROLLBACK entered.
A ** RABAX: level LEV_RX_ROLLBACK completed.
A ** RABAX: level LEV_RX_DB_ALIVE entered.
A ** RABAX: level LEV_RX_DB_ALIVE completed.
A ** RABAX: level LEV_RX_HOOKS entered.
A ** RABAX: level LEV_RX_HOOKS completed.
A ** RABAX: level LEV_RX_STANDARD entered.
A ** RABAX: level LEV_RX_STANDARD completed.
A ** RABAX: level LEV_RX_STOR_VALUES entered.
A ** RABAX: level LEV_RX_STOR_VALUES completed.
A ** RABAX: level LEV_RX_C_STACK entered.
A ** RABAX: level LEV_RX_C_STACK completed.
A ** RABAX: level LEV_RX_MEMO_CHECK entered.
A ** RABAX: level LEV_RX_MEMO_CHECK completed.
A ** RABAX: level LEV_RX_AFTER_MEMO_CHECK entered.
A ** RABAX: level LEV_RX_AFTER_MEMO_CHECK completed.
A ** RABAX: level LEV_RX_INTERFACES entered.
A ** RABAX: level LEV_RX_INTERFACES completed.
A ** RABAX: level LEV_RX_GET_MESS entered.
A ** RABAX: level LEV_RX_GET_MESS completed.
A ** RABAX: level LEV_RX_INIT_SNAP entered.
A ** RABAX: level LEV_RX_INIT_SNAP completed.
A ** RABAX: level LEV_RX_WRITE_SYSLOG entered.
A ** RABAX: level LEV_RX_WRITE_SYSLOG completed.
A ** RABAX: level LEV_RX_WRITE_SNAP entered.
A ** RABAX: level LEV_SN_END completed.
A ** RABAX: level LEV_RX_SET_ALERT entered.
A ** RABAX: level LEV_RX_SET_ALERT completed.
A ** RABAX: level LEV_RX_COMMIT entered.
A ** RABAX: level LEV_RX_COMMIT completed.
A ** RABAX: level LEV_RX_SNAP_SYSLOG entered.
A ** RABAX: level LEV_RX_SNAP_SYSLOG completed.
A ** RABAX: level LEV_RX_RESET_PROGS entered.
A ** RABAX: level LEV_RX_RESET_PROGS completed.
A ** RABAX: level LEV_RX_STDERR entered.
A Sun Apr 05 22:38:04 2009
A
A ABAP Program SAPFSDS1 .
A Source FSDS1E01 Line 380.
A Error Code DBIF_RSQL_SQL_ERROR.
A Module $Id: //bas/700_REL/src/krn/runt/absapsql.c#9 $ SAP.
A Function HandleRsqlErrors Line 778.
A ** RABAX: level LEV_RX_STDERR completed.
A ** RABAX: level LEV_RX_RFC_ERROR entered.
A ** RABAX: level LEV_RX_RFC_ERROR completed.
A ** RABAX: level LEV_RX_RFC_CLOSE entered.
A ** RABAX: level LEV_RX_RFC_CLOSE completed.
A ** RABAX: level LEV_RX_IMC_ERROR entered.
A ** RABAX: level LEV_RX_IMC_ERROR completed.
A ** RABAX: level LEV_RX_DATASET_CLOSE entered.
A ** RABAX: level LEV_RX_DATASET_CLOSE completed.
A ** RABAX: level LEV_RX_RESET_SHMLOCKS entered.
A ** RABAX: level LEV_RX_RESET_SHMLOCKS completed.
A ** RABAX: level LEV_RX_ERROR_SAVE entered.
A ** RABAX: level LEV_RX_ERROR_SAVE completed.
A ** RABAX: level LEV_RX_ERROR_TPDA entered.
A ** RABAX: level LEV_RX_ERROR_TPDA completed.
A ** RABAX: level LEV_RX_PXA_RELEASE_RUDI entered.
A ** RABAX: level LEV_RX_PXA_RELEASE_RUDI completed.
A ** RABAX: level LEV_RX_LIVE_CACHE_CLEANUP entered.
A ** RABAX: level LEV_RX_LIVE_CACHE_CLEANUP completed.
A ** RABAX: level LEV_RX_END entered.
A ** RABAX: level LEV_RX_END completed.
A ** RABAX: end no http/smtp
A ** RABAX: end RX_BTCHLOG|RX_VBLOG
A SQL error in the database when accessing a table..
A
I have started the local client copy and have stopped it in the middle. i have logged off and tried to login again, this is the start of the dump.
I am unable to resolve it. PLEASE give a solution
Thanks & Regards,
Subbu.

Hi Subbu,
We were in touch when you previously posted this, but somehow I got an error when I tried to access the thread. I remember that your DB was still 10.2.0.1 and that this may have caused a corruption. The only explanation for ORA-32255 that looks remotely interesting is that it may occur with the OCI (Oracle Call Interface) accessing a NULL LOB (and ATAB does contain a LOB field). Do you have any chance of upgrading the database where you have the problem to 10.2.0.4?
I don't know whether we'll learn anything useful from this (you might just get an ORA-32255 again) but could you execute the following statement in SQLPLUS:
select count(*) from <sapuser>.ATAB where VARDATA IS NULL;
(replace <sapuser> with the name of the SAP schema owner)
Regards,
Mark

Oracle Idle Time errors

Any suggestions on how I can avoid "ORA-02396: exceeded maximum idle time, please connect again" errors?
Getting rid of the idle time restriction on the database is not an option, so I was looking for a parameter to tweak so Pages recovers better from Oracle idle timeouts.
What's happening are javascript errors and other errors in the logs when there is a timeout.

You may have issues that are not linked to timeout. Please check your database instance alert log:
$ oerr ora 3113
03113, 00000, "end-of-file on communication channel"
// *Cause: The connection between Client and Server process was broken.
// *Action: There was a communication error that requires further investigation.
//          First, check for network problems and review the SQL*Net setup.
//          Also, look in the alert.log file for any errors. Finally, test to
//          see whether the server process is dead and whether a trace file
//          was generated at failure time.

Field in data file exceeds maximum length - CTL file error

Hi,
I am loading data in new system using CTL file. But I am getting error as 'Field in data file exceeds maximum length' for few records, other records are processed successfully. I have checked the length of the error record in the extract file, it is less than the length in the target table, VARCHAR2 (2000 Byte). Below is the example of error data,
Hi Rebecca~I have just spoken to our finance department and they have agreed that the ABCs payments made can be allocated to the overdue invoices, can you send any future invoices direct to me so that I can get them paid on time.~Hope this is ok ~Thanks~Terry~
Is this error caused because of the special characters in the string?
Below is the ctl file I am using,
OPTIONS (SKIP=2)
LOAD DATA
CHARACTERSET WE8ISO8859P1
INFILE '$FILE'
APPEND
INTO TABLE "XXDM_DM_17_ONACCOUNT_REC_SRC"
WHEN (1)!= 'FOOTER='
FIELDS TERMINATED BY '|'
OPTIONALLY ENCLOSED BY '"'
TRAILING NULLCOLS (
                              <Column_name>,
                              <Column_name>,
                              COMMENTS,
                              <Column_name>,
                              <Column_name>
Thanks in advance,
Aditya

Hi,
I suspect this is because of the built in default length of character datatypes in sqldr - it defaults to char(255) taking no notice of what the actual table definition is.
Try adding CHAR(2000), to your controlfile so you end up with something like this:
OPTIONS (SKIP=2)
LOAD DATA
CHARACTERSET WE8ISO8859P1
INFILE '$FILE'
APPEND
INTO TABLE "XXDM_DM_17_ONACCOUNT_REC_SRC"
WHEN (1)!= 'FOOTER='
FIELDS TERMINATED BY '|'
OPTIONALLY ENCLOSED BY '"'
TRAILING NULLCOLS (
                              <Column_name>,
                              <Column_name>,
                              COMMENTS CHAR(2000),
                              <Column_name>,
                              <Column_name>
Cheers,
Harry

On load, getting error: Field in data file exceeds maximum length

Oracle Database 11g Enterprise Edition Release 11.2.0.3.0 - 64bit Production
PL/SQL Release 11.2.0.3.0 - Production
CORE    11.2.0.3.0    Production
TNS for Solaris: Version 11.2.0.3.0 - Production
NLSRTL Version 11.2.0.3.0 - Production
I'm trying to load a table, small in size (110 rows, 6 columns). One of the columns, called NOTES is erroring when I run the load. It is saying that the column size exceeds max limit. As you can see here, the table column is set to 4000 Bytes)
CREATE TABLE NRIS.NRN_REPORT_NOTES
NOTES_CN      VARCHAR2(40 BYTE)               DEFAULT sys_guid()            NOT NULL,
REPORT_GROUP VARCHAR2(100 BYTE)              NOT NULL,
AREACODE      VARCHAR2(50 BYTE)               NOT NULL,
ROUND         NUMBER(3)                       NOT NULL,
NOTES         VARCHAR2(4000 BYTE),
LAST_UPDATE   TIMESTAMP(6) WITH TIME ZONE     DEFAULT systimestamp          NOT NULL
TABLESPACE USERS
RESULT_CACHE (MODE DEFAULT)
PCTUSED    0
PCTFREE    10
INITRANS   1
MAXTRANS   255
STORAGE    (
            INITIAL          80K
            NEXT             1M
            MINEXTENTS       1
            MAXEXTENTS       UNLIMITED
            PCTINCREASE      0
            BUFFER_POOL      DEFAULT
            FLASH_CACHE      DEFAULT
            CELL_FLASH_CACHE DEFAULT
LOGGING
NOCOMPRESS
NOCACHE
NOPARALLEL
MONITORING;
I did a little investigating, and it doesn't add up.
when i run
select max(lengthb(notes)) from NRIS.NRN_REPORT_NOTES
I get a return of
643
That tells me that the largest size instance of that column is only 643 bytes. But EVERY insert is failing.
Here is the loader file header, and first couple of inserts:
LOAD DATA
INFILE *
BADFILE './NRIS.NRN_REPORT_NOTES.BAD'
DISCARDFILE './NRIS.NRN_REPORT_NOTES.DSC'
APPEND INTO TABLE NRIS.NRN_REPORT_NOTES
Fields terminated by ";" Optionally enclosed by '|'
NOTES_CN,
REPORT_GROUP,
AREACODE,
ROUND NULLIF (ROUND="NULL"),
NOTES,
LAST_UPDATE TIMESTAMP WITH TIME ZONE "MM/DD/YYYY HH24:MI:SS.FF9 TZR" NULLIF (LAST_UPDATE="NULL")
BEGINDATA
|E2ACF256F01F46A7E0440003BA0F14C2|;|DEMOGRAPHICS|;|A01003|;3;|Demographic results show that 46 percent of visits are made by females. Among racial and ethnic minorities, the most commonly encountered are Native American (4%) and Hispanic / Latino (2%). The age distribution shows that the Bitterroot has a relatively small proportion of children under age 16 (14%) in the visiting population. People over the age of 60 account for about 22% of visits.   Most of the visitation is from the local area. More than 85% of visits come from people who live within 50 miles.|;07/29/2013 16:09:27.000000000 -06:00
|E2ACF256F02046A7E0440003BA0F14C2|;|VISIT DESCRIPTION|;|A01003|;3;|Most visits to the Bitterroot are fairly short. Over half of the visits last less than 3 hours. The median length of visit to overnight sites is about 43 hours, or about 2 days. The average Wilderness visit lasts only about 6 hours, although more than half of those visits are shorter than 3 hours long.   Most visits come from people who are fairly frequent visitors. Over thirty percent are made by people who visit between 40 and 100 times per year. Another 8 percent of visits are from people who report visiting more than 100 times per year.|;07/29/2013 16:09:27.000000000 -06:00
|E2ACF256F02146A7E0440003BA0F14C2|;|ACTIVITIES|;|A01003|;3;|The most frequently reported primary activity is hiking/walking (42%), followed by downhill skiing (12%), and hunting (8%). Over half of the visits report participating in relaxing and viewing scenery.|;07/29/2013 16:09:27.000000000 -06:00
Here is the full beginning of the loader log, ending after the first row return. (They ALL say the same error)
SQL*Loader: Release 10.2.0.4.0 - Production on Thu Aug 22 12:09:07 2013
Copyright (c) 1982, 2007, Oracle. All rights reserved.
Control File:   NRIS.NRN_REPORT_NOTES.ctl
Data File:      NRIS.NRN_REPORT_NOTES.ctl
Bad File:     ./NRIS.NRN_REPORT_NOTES.BAD
Discard File: ./NRIS.NRN_REPORT_NOTES.DSC
(Allow all discards)
Number to load: ALL
Number to skip: 0
Errors allowed: 50
Bind array:     64 rows, maximum of 256000 bytes
Continuation:    none specified
Path used:      Conventional
Table NRIS.NRN_REPORT_NOTES, loaded from every logical record.
Insert option in effect for this table: APPEND
   Column Name                  Position   Len Term Encl Datatype
NOTES_CN                            FIRST     *   ; O(|) CHARACTER
REPORT_GROUP                         NEXT     *   ; O(|) CHARACTER
AREACODE                             NEXT     *   ; O(|) CHARACTER
ROUND                                NEXT     *   ; O(|) CHARACTER
    NULL if ROUND = 0X4e554c4c(character 'NULL')
NOTES                                NEXT     *   ; O(|) CHARACTER
LAST_UPDATE                          NEXT     *   ; O(|) DATETIME MM/DD/YYYY HH24:MI:SS.FF9 TZR
    NULL if LAST_UPDATE = 0X4e554c4c(character 'NULL')
Record 1: Rejected - Error on table NRIS.NRN_REPORT_NOTES, column NOTES.
Field in data file exceeds maximum length...
I am not seeing why this would be failing.

HI,
the problem is delimited data defaults to char(255)..... Very helpful I know.....
what you need to two is tell sqlldr hat the data is longer than this.
so change notes to notes char(4000) in you control file and it should work.
cheers,
harry

Lax validation errors on schema import ('version' exceeds maximum length)

I have a schema as per below. I'm trying to import it into Oracle 10.2.0.2.0. However, I'm getting the following lax validation error:
Error loading ora_business_rule.xsd:ORA-30951: Element or attribute at Xpath /schema[@version] exceeds maximum length
I can fix it by modifying the attribute and shortening it but I'd like to know why it's occuring. Insofar as I can tell there is no imposed limit on the size of schema attributes according to the W3C standard. Which then makes me wonder: does Oracle impose limits on the length of all attributes or is this specific to 'version' ? If there is a limit, what is the upper bound (in bytes) ? Where is this documented?
Cheers,
Daniel
<?xml version="1.0" encoding="UTF-8"?>
<xs:schema xmlns:xs="http://www.w3.org/2001/XMLSchema" xmlns:br="http://foo.com/BusinessRule_PSG_V001" targetNamespace="http://foo.com/BusinessRule_PSG_V001" elementFormDefault="qualified" attributeFormDefault="unqualified" version="last committed on $LastChangedDate: 2006-05-19 11:00:52 +1000 (Fri, 19 May 2006) $">
     <xs:element name="edit">
          <xs:complexType>
               <xs:sequence>
                    <xs:element name="edit_id" type="xs:string"/>
                    <xs:element ref="br:business_rule"/>
               </xs:sequence>
          </xs:complexType>
     </xs:element>
     <xs:element name="derivation">
          <xs:complexType>
               <xs:sequence>
                    <xs:element name="derivation_id" type="xs:string"/>
                    <xs:element ref="br:derivation_type"/>
                    <xs:element ref="br:business_rule"/>
               </xs:sequence>
          </xs:complexType>
     </xs:element>
     <xs:element name="derivation_type">
          <xs:simpleType>
               <xs:restriction base="xs:NMTOKENS">
                    <xs:enumeration value="complex"/>
                    <xs:enumeration value="format"/>
                    <xs:enumeration value="formula"/>
                    <xs:enumeration value="recode"/>
                    <xs:enumeration value="SAS code"/>
                    <xs:enumeration value="transfer"/>
                    <xs:enumeration value="count"/>
                    <xs:enumeration value="sum"/>
                    <xs:enumeration value="max"/>
                    <xs:enumeration value="min"/>
               </xs:restriction>
          </xs:simpleType>
     </xs:element>
     <xs:element name="business_rule"></xs:element>
</xs:schema>

Opps -- Sorry it's a decision we took when looking at Version
When we registered the Schema for Schemas during XDB bootstrap the Version attriubte was mapped to varchar2(12).
SQL> desc xdb.xdb$schema_T
Name                                      Null?    Type
SCHEMA_URL                                         VARCHAR2(700)
TARGET_NAMESPACE                                   VARCHAR2(2000)
VERSION                                            VARCHAR2(12)
NUM_PROPS                                          NUMBER(38)
FINAL_DEFAULT                                      XDB.XDB$DERIVATIONCHOICE
BLOCK_DEFAULT                                      XDB.XDB$DERIVATIONCHOICE
ELEMENT_FORM_DFLT                                  XDB.XDB$FORMCHOICE
ATTRIBUTE_FORM_DFLT                                XDB.XDB$FORMCHOICE
ELEMENTS                                           XDB.XDB$XMLTYPE_REF_LIST_T
SIMPLE_TYPE                                        XDB.XDB$XMLTYPE_REF_LIST_T
COMPLEX_TYPES                                      XDB.XDB$XMLTYPE_REF_LIST_T
ATTRIBUTES                                         XDB.XDB$XMLTYPE_REF_LIST_T
IMPORTS                                            XDB.XDB$IMPORT_LIST_T
INCLUDES                                           XDB.XDB$INCLUDE_LIST_T
FLAGS                                              RAW(4)
SYS_XDBPD$                                         XDB.XDB$RAW_LIST_T
ANNOTATIONS                                        XDB.XDB$ANNOTATION_LIST_T
MAP_TO_NCHAR                                       RAW(1)
MAP_TO_LOB                                         RAW(1)
GROUPS                                             XDB.XDB$XMLTYPE_REF_LIST_T
ATTRGROUPS                                         XDB.XDB$XMLTYPE_REF_LIST_T
ID                                                 VARCHAR2(256)
VARRAY_AS_TAB                                      RAW(1)
SCHEMA_OWNER                                       VARCHAR2(30)
NOTATIONS                                          XDB.XDB$NOTATION_LIST_T
LANG                                               VARCHAR2(4000)
SQL>

Ctxload error DRG-11530: token exceeds maximum length

I downloaded the 11g examples (formerly the companion cd) with the supplied knowledge base (thesauri), unzipped it, installed it, and confirmed that the droldUS.dat file is there. Then I tried to use ctxload to create a default thesaurus, using that file, as per the online documentation. It creates the default thesaurus, but does not load the data, due to the error "DRG-11530: token exceeds maximum length". Apparently one of the terms is too long. But what can I use to edit the file? I tried notepad, but it was too big. I tried wordpad, but it was unreadable. I was able to create a default thesaurus using the much smaller sample thesaurus dr0thsus.txt, so I confirmed that there is nothing wrong with the syntax or privileges. Please see the copy of the run below. Is there a way to edit the droldUS.dat file or a workaround or am I not loading it correctly? Does the .dat file need to be loaded differently than the .txt file?
CTXSYS@orcl_11g> select banner from v$version
2 /
BANNER
Oracle Database 11g Enterprise Edition Release 11.1.0.6.0 - Production
PL/SQL Release 11.1.0.6.0 - Production
CORE    11.1.0.6.0      Production
TNS for 32-bit Windows: Version 11.1.0.6.0 - Production
NLSRTL Version 11.1.0.6.0 - Production
CTXSYS@orcl_11g> select count(*) from ctx_thesauri where ths_name = 'DEFAULT'
2 /
COUNT(*)
         0
CTXSYS@orcl_11g> select count(*) from ctx_thes_phrases where thp_thesaurus = 'DE
FAULT'
2 /
COUNT(*)
         0
CTXSYS@orcl_11g> host ctxload -thes -user ctxsys/ctxsys@orcl -name default -file
C:\app\Barbara\product\11.1.0\db_1\ctx\data\enlx\droldUS.dat
Connecting...
Creating thesaurus default...
Thesaurus default created...
Processing...
DRG-11530: token exceeds maximum length
Disconnected
CTXSYS@orcl_11g> connect ctxsys/ctxsys@orcl
Connected.
CTXSYS@orcl_11g>
CTXSYS@orcl_11g> select count(*) from ctx_thesauri where ths_name = 'DEFAULT'
2 /
COUNT(*)
         1
CTXSYS@orcl_11g> select count(*) from ctx_thes_phrases where thp_thesaurus = 'DE
FAULT'
2 /
COUNT(*)
         0
CTXSYS@orcl_11g> exec ctx_thes.drop_thesaurus ('default')
PL/SQL procedure successfully completed.
CTXSYS@orcl_11g> host ctxload -thes -user ctxsys/ctxsys@orcl -name default -file
C:\app\Barbara\product\11.1.0\db_1\ctx\sample\thes\dr0thsus.txt
Connecting...
Creating thesaurus default...
Thesaurus default created...
Processing...
1000 lines processed
2000 lines processed
3000 lines processed
4000 lines processed
5000 lines processed
6000 lines processed
7000 lines processed
8000 lines processed
9000 lines processed
10000 lines processed
11000 lines processed
12000 lines processed
13000 lines processed
14000 lines processed
15000 lines processed
16000 lines processed
17000 lines processed
18000 lines processed
19000 lines processed
20000 lines processed
21000 lines processed
21760 lines processed successfully
Beginning insert...21760 lines inserted successfully
Disconnected
CTXSYS@orcl_11g> select count(*) from ctx_thesauri where ths_name = 'DEFAULT'
2 /
COUNT(*)
         1
CTXSYS@orcl_11g> select count(*) from ctx_thes_phrases where thp_thesaurus = 'DE
FAULT'
2 /
COUNT(*)
      9582
CTXSYS@orcl_11g>

Hi Roger,
Thanks for the response. You are correct. I was confusing the terms thesaurus and knowledge base, which sometimes seem to be used interchangeably or synonymously, but are actually two different things. I read over the various sections of the documentation regarding the supplied knowledge base and supplied thesaurus more carefully and believe I understand now. Apparently, the dr0thsus.txt file that I did ultimately load using ctxload to create a default thesaurus is the supplied thesaurus that is intended to be used to create the default English thesaurus, which supports ctx_thes syn and such. The other droldUS.dat file that I mistakenly tried to load using ctxload is the supplied compiled knowledge base that supports ctx_doc themes and gist and such. In the past I have used ctx_thes.create_thesaurus to create a thesaurus, but using ctxload can also load a thesaurus from a text file with the data in a specified format. Once a thesaurus is loaded using ctxload, it can then be compiled using ctxkbtc to add it to the existing compiled knowledge base. So, the knowledge base is sort of a compilation of thesauri, which is what led to my confusion in terminology. I think I have it all straight in my mind now and hopefully this will help anybody else who searches for the same problem and finds this.
Thanks,
Barbara

The error is like : Variable length field exceeds maximum length

Hi All,
I am trying to load some signature ascii data from load file. so i wrote the code like below in my controal file to load that to database. For SIGN_IMAGE in oracle db it was mentioned as RAW(2000). The below is worked fine when i tried in window and oracle 8i environment.
SIG_TYPE POSITION(23:23) CHAR,
SIGN_IMAGE POSITION(24:1977) VARRAW(2000)
NULLIF SIGN_IMAGE=BLANKS,
SIGN_IMAGE1 POSITION(1978:3930) VARRAW(2000)
NULLIF SIGN_IMAGE1=BLANKS
But when i ported the same thing to solaris and oracle 10g environment. The below code is giving error when SQL Loder loading.
The error is like for column SIGN_IMAGE : Variable length field exceeds maximum length.
But here i am giving a lenght of 1954 only with including 2 bytes length of the string.
Could any one tell me what is exactly the problem? i am not able sort out the issue.
Thanks,
Shashi

Maybe:
http://download.oracle.com/docs/cd/B19306_01/server.102/b14215/ldr_field_list.htm#i1011032

Hello I have a problem with security questions and i cant reset to my email The error was   Exceeded Maximum Attempts We apologize, but we were unable to verify your account information with the answers you provided to our security questions. You have

Hello
I have a problem with security questions and i cant reset to my email
The error was
Exceeded Maximum Attempts
We apologize, but we were unable to verify your account information with the answers you provided to our security questions.
You have made too many attempts to answer these questions. So, for security reasons, you will not be able to reset password for the next eight hours.
Click here      for assistance.
i waited more than eight hours. and back to my account but it is the same ( no change ) i cant find forgot your answers
http://www.traidnt.net/vb/attachment...134863-333.jpg
can you help me please

Alternatives for Help Resetting Security Questions and Rescue Mail
     1. Apple ID- All about Apple ID security questions.
     2. Rescue email address and how to reset Apple ID security questions
     3. Apple ID- Contacting Apple for help with Apple ID account security.
     4. Fill out and submit this form. Select the topic, Account Security.
     5. Call Apple Customer Service: Contacting Apple for support in your
          country and ask to speak to Account Security.
How to Manage your Apple ID: Manage My Apple ID

Errors with Queue exceed maximum capacity of: '65536' elements

I faced this issue recently , where the messaging bridges from an external domain was not able to connect my my domain.
When i checked the logs i found one of the server with the below error.
####<Feb 28, 2011 7:31:23 PM GMT> <Warning> <RMI> <dyh75a03> <managed06_orneop02> <ExecuteThread: '2' for queue: 'weblogic.socket.Muxer'> <<WLS Kernel>> <> <
BEA-080003> <RuntimeException thrown by rmi server: weblogic.rmi.internal.BasicServerRef@a - hostID: '4275655823338432757S:dywlms06-orneop02.neo.openreach.co
.uk:[61007,61007,-1,-1,61007,-1,-1,0,0]:dywlms01-orneop02.neo.openreach.co.uk:61002,dywlms02-orneop02.neo.openreach.co.uk:61003,dywlms03-orneop02.neo.openrea
ch.co.uk:61004,dywlms04-orneop02.neo.openreach.co.uk:61005,dywlms05-orneop02.neo.openreach.co.uk:61006,dywlms06-orneop02.neo.openreach.co.uk:61007,dywlms07-o
rneop02.neo.openreach.co.uk:61008,dywlms08-orneop02.neo.openreach.co.uk:61009,dywlms09-orneop02.neo.openreach.co.uk:61010:orneop02:managed06_orneop02', oid:
'10', implementation: 'weblogic.transaction.internal.CoordinatorImpl@f6ede1'
weblogic.utils.UnsyncCircularQueue$FullQueueException: Queue exceed maximum capacity of: '65536' elements.
weblogic.utils.UnsyncCircularQueue$FullQueueException: Queue exceed maximum capacity of: '65536' elements
at weblogic.utils.UnsyncCircularQueue.expandQueue(UnsyncCircularQueue.java:72)
at weblogic.utils.UnsyncCircularQueue.put(UnsyncCircularQueue.java:94)
at weblogic.kernel.ExecuteThreadManager.execute(ExecuteThreadManager.java:374)
at weblogic.kernel.Kernel.execute(Kernel.java:345)
at weblogic.rmi.internal.BasicServerRef.dispatch(BasicServerRef.java:312)
at weblogic.rjvm.RJVMImpl.dispatchRequest(RJVMImpl.java:1113)
at weblogic.rjvm.RJVMImpl.dispatch(RJVMImpl.java:1031)
at weblogic.rjvm.ConnectionManagerServer.handleRJVM(ConnectionManagerServer.java:225)
at weblogic.rjvm.ConnectionManager.dispatch(ConnectionManager.java:805)
at weblogic.rjvm.t3.T3JVMConnection.dispatch(T3JVMConnection.java:782)
at weblogic.socket.SocketMuxer.readReadySocketOnce(SocketMuxer.java:705)
at weblogic.socket.SocketMuxer.readReadySocket(SocketMuxer.java:651)
at weblogic.socket.PosixSocketMuxer.processSockets(PosixSocketMuxer.java:123)
at weblogic.socket.SocketReaderRequest.execute(SocketReaderRequest.java:32)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:224)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:183)
>
As a workaround , i had restart this server. After this bridges from ext domain was working.
Has any one come across this issue before.
Regards
Deepak

Found this issue again in one of the domains....the threads dumps is showing deadlocks.
Found one Java-level deadlock:
=============================
"ExecuteThread: '3' for queue: 'weblogic.kernel.Default'":
waiting to lock monitor 0868dea4 (object a4e99be8, a weblogic.transaction.internal.TransactionLoggerImpl$IOBuffer),
which is held by "ExecuteThread: '6' for queue: 'weblogic.kernel.Default'"
"ExecuteThread: '6' for queue: 'weblogic.kernel.Default'":
waiting to lock monitor 00255304 (object b23be050, a weblogic.transaction.internal.ServerTransactionImpl),
which is held by "ExecuteThread: '0' for queue: 'weblogic.kernel.Non-Blocking'"
"ExecuteThread: '0' for queue: 'weblogic.kernel.Non-Blocking'":
waiting to lock monitor 086677a4 (object a4e99c00, a weblogic.transaction.internal.TransactionLoggerImpl$IOBuffer),
which is held by "ExecuteThread: '3' for queue: 'weblogic.kernel.Default'"
Java stack information for the threads listed above:
===================================================
"ExecuteThread: '3' for queue: 'weblogic.kernel.Default'":
     at weblogic.transaction.internal.TransactionLoggerImpl$LogDisk.release(TransactionLoggerImpl.java:1323)
     - waiting to lock <a4e99be8> (a weblogic.transaction.internal.TransactionLoggerImpl$IOBuffer)
     - locked <a4e99c00> (a weblogic.transaction.internal.TransactionLoggerImpl$IOBuffer)
     at weblogic.transaction.internal.TransactionLoggerImpl.release(TransactionLoggerImpl.java:389)
     at weblogic.transaction.internal.ServerTransactionImpl.releaseLog(ServerTransactionImpl.java:2767)
     at weblogic.transaction.internal.ServerTransactionManagerImpl.remove(ServerTransactionManagerImpl.java:1466)
     at weblogic.transaction.internal.ServerTransactionImpl.afterCommittedStateHousekeeping(ServerTransactionImpl.java:2645)
     at weblogic.transaction.internal.ServerTransactionImpl.setCommitted(ServerTransactionImpl.java:2669)
     at weblogic.transaction.internal.ServerTransactionImpl.localCommit(ServerTransactionImpl.java:1875)
     at weblogic.transaction.internal.ServerTransactionImpl.localCommit(ServerTransactionImpl.java:1163)
     at weblogic.transaction.internal.SubCoordinatorImpl.startCommit(SubCoordinatorImpl.java:274)
     at weblogic.transaction.internal.CoordinatorImpl_WLSkel.invoke(Unknown Source)
     at weblogic.rmi.internal.BasicServerRef.invoke(BasicServerRef.java:492)
     at weblogic.rmi.internal.BasicServerRef$1.run(BasicServerRef.java:435)
     at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:363)
     at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:147)
     at weblogic.rmi.internal.BasicServerRef.handleRequest(BasicServerRef.java:430)
     at weblogic.rmi.internal.BasicExecuteRequest.execute(BasicExecuteRequest.java:35)
     at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:224)
     at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:183)
"ExecuteThread: '6' for queue: 'weblogic.kernel.Default'":
     at weblogic.transaction.internal.ServerTransactionImpl.onDisk(ServerTransactionImpl.java:836)
     - waiting to lock <b23be050> (a weblogic.transaction.internal.ServerTransactionImpl)
     at weblogic.transaction.internal.TransactionLoggerImpl$LogDisk.write(TransactionLoggerImpl.java:1252)
     - locked <a4e99be8> (a weblogic.transaction.internal.TransactionLoggerImpl$IOBuffer)
     - locked <a4e99bb8> (a weblogic.transaction.internal.TransactionLoggerImpl$LogDisk)
     at weblogic.transaction.internal.TransactionLoggerImpl.flushLog(TransactionLoggerImpl.java:614)
     at weblogic.transaction.internal.TransactionLoggerImpl.store(TransactionLoggerImpl.java:305)
     at weblogic.transaction.internal.ServerTransactionImpl.log(ServerTransactionImpl.java:1850)
     at weblogic.transaction.internal.ServerTransactionImpl.globalPrepare(ServerTransactionImpl.java:2118)
     at weblogic.transaction.internal.ServerTransactionImpl.internalCommit(ServerTransactionImpl.java:259)
     at weblogic.transaction.internal.ServerTransactionImpl.commit(ServerTransactionImpl.java:228)
     at weblogic.transaction.internal.TransactionManagerImpl.commit(TransactionManagerImpl.java:303)
     at weblogic.jms.bridge.internal.MessagingBridge.onMessageInternal(MessagingBridge.java:1279)
     at weblogic.jms.bridge.internal.MessagingBridge.onMessage(MessagingBridge.java:1190)
     at weblogic.jms.adapter.JMSBaseConnection$29.run(JMSBaseConnection.java:1989)
     at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:363)
     at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:147)
     at weblogic.jms.adapter.JMSBaseConnection.onMessage(JMSBaseConnection.java:1985)
     at weblogic.jms.client.JMSSession.onMessage(JMSSession.java:2686)
     at weblogic.jms.client.JMSSession.execute(JMSSession.java:2598)
     at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:224)
     at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:183)
"ExecuteThread: '0' for queue: 'weblogic.kernel.Non-Blocking'":
     at weblogic.transaction.internal.TransactionLoggerImpl$LogDisk.release(TransactionLoggerImpl.java:1322)
     - waiting to lock <a4e99c00> (a weblogic.transaction.internal.TransactionLoggerImpl$IOBuffer)
     at weblogic.transaction.internal.TransactionLoggerImpl.release(TransactionLoggerImpl.java:389)
     at weblogic.transaction.internal.ServerTransactionImpl.releaseLog(ServerTransactionImpl.java:2767)
     at weblogic.transaction.internal.ServerTransactionManagerImpl.remove(ServerTransactionManagerImpl.java:1466)
     at weblogic.transaction.internal.ServerTransactionImpl.setRolledBack(ServerTransactionImpl.java:2597)
     at weblogic.transaction.internal.ServerTransactionImpl.ackRollback(ServerTransactionImpl.java:1093)
     - locked <b23be050> (a weblogic.transaction.internal.ServerTransactionImpl)
     at weblogic.transaction.internal.CoordinatorImpl.ackRollback(CoordinatorImpl.java:298)
     at weblogic.transaction.internal.CoordinatorImpl_WLSkel.invoke(Unknown Source)
     at weblogic.rmi.internal.BasicServerRef.invoke(BasicServerRef.java:492)
     at weblogic.rmi.internal.BasicServerRef$1.run(BasicServerRef.java:435)
     at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:363)
     at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:147)
     at weblogic.rmi.internal.BasicServerRef.handleRequest(BasicServerRef.java:430)
     at weblogic.rmi.internal.BasicExecuteRequest.execute(BasicExecuteRequest.java:35)
     at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:224)
     at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:183)
Found 1 deadlock.

Error : Summary String length exceeds maximum

I just got an error while trying to Update a User on my IDM instance.
com.waveset.util.InternalError : Summary String length (3003) exceeds maximum (2048)
I already checked this forum for similar issues, and I found a couple of threads. However, for some reason, I was unable to VIEW those threads (something about not having the rights/access to read those threads)
So, I am posting my issue here.
Any help will be greatly appreciated

Roman,
if you are using NETBEANS, this is what you do :
(a) right-click on the name of your instance (in the Projects Tab)
(b) select IDM
(c) then select "Download Objects"
(d) From the list that appears, choose "Common Configuration Object Types"
(e) Next, choose "*Repository Configuration"*
Somewhere in this file, there is a clause which states : *"Maximum Summary = '2048'*
Change this value to something higher (but, *NOT* too high !)
This should solve your problem

Upgrade error "exceeded maximum allowed length (134217728 bytes)

Hi:
I'm trying to add a patch to the OEM patch cache, and I'm getting an error:
Error: - Failed to Upload File.Uploaded file of length 545451768 bytes exceeded maximum allowed length (134217728 bytes)
The patch file is what it is (545451768 bytes). How do I install this patch? I'm trying to upgrade a 10.1.0.3 DB to 10.1.0.4
Thanks

This log is for external user.
Did you deploy Lync edge server?
The Edge Server rejects the authentication request, and redirects the Lync 2010 client to the Lync Web Services (https://lyncexternal.contoso.com/CertProv/CertProvisioningService.svc).
It seems the redirect fails, please check the event view on Lync edge Server.
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

Error: Debug Component exceeds maximum size (65535 bytes)

Hi All,
It would seem that I have come across a limitation in the CAP file format for Java Card 2.2.1. When I run the Sun 2.2.1 converter I get the following output:
Converting oncard package
Java Card 2.2.1 Class File Converter, Version 1.3
Copyright 2003 Sun Microsystems, Inc. All rights reserved. Use is subject to license terms.
error: Debug Component exceeds maximum size (65535 bytes).
Cap file generation failed.
conversion completed with 1 errors and 0 warnings.This also happens with JCDK 2.2.2. Is there any way around this limitation? I can instruct the compiler to not generate some of the debug output such as variable attributes, but this makes the debugger less than useful. I could not find anything in the JCVM spec for JC2.2.1 that mentions this limitation (I could have missed it very easily if it is there). Is this a limitation that will be lifted in new versions of the standard? This is tarting to be a bit of a problem as our code base has outgrown our development tools (no more debugger). Compiling and running without debug information works fine.
Any information on this would be much appreciated.
Cheers,
Shane

For those that are interested, I found this in the Java Card VM spec. u1 and u2 are 1 and 2 byte unsigned values respectively. It would appear that it is a limitation of the CAP file format. We have managed to work around this problem (parsing the debug component of the cap file was very informative) by shortening package names, reducing exception handling, and removing classes that we could do without.
It looks like this is removed for JC3.0 Connected Edition does not have this issue as it does not have CAP files, but JC2.2.2 and JC3.0 Classic Edition have this same issue. It would be nice if there was a converter/debugger combination that removed this limitation. If anyone knows of such a combination, I am all ears! I know for a fact that JCOP does not :(
Cheers,
Shane
*6.14 Debug Component*
This section specifies the format for the Debug Component. The Debug Component contains all the metadata necessary for debugging a package on a suitably instrumented Java Card virtual machine. It is not required for executing Java Card programs in a non-debug environment.
The Debug Component references the Class Component (Section 6.8 "Class Component), Method Component (Section 6.9 "Method Component), and Static Field Component (Section 6.10 "Static Field Component). No components reference the Debug Component.
The Debug Component is represented by the following structure:
{code}
debug_component {
u1 tag
u2 size
u2 string_count
utf8_info strings_table[string_count]
u2 package_name_index
u2 class_count
class_debug_info classes[class_count]
{code}
The items in the debug_component structure are defined as follows:
*tag* tag item has the value COMPONENT_Debug (12).
*size* The number of bytes in the component, excluding the tag and size items. The value of size must be greater than zero.

"Filtering exceed maximum allocated time" error in crawl log

Similar Messages

Maybe you are looking for