ORA-02399: exceeded maximum connect time, you are being logged off

What could have been the cause of "ORA-02399: exceeded maximum connect time, you are being logged off"? I am always getting that issue even if I am continously doing some query.

There's a resource limit active (RESOURCE_LIMIT=TRUE in pfile/spfile) and a user_profile (which limits the connection time) dedicated to the user.

Similar Messages

"Filtering exceed maximum allocated time" error in crawl log

A crawler log contained the following error. Is this error related to the Crawler Configuration "Crawler Timeout Threshold (seconds)" parameter? (Mine is set to *30* seconds.)
"Filtering exceed maximum allocated time *108* seconds; process killed. exit with status 1 without any error message"

No, they are unrelated. Filtering is the process of converting formatted (eg, Word, PDF) docs into indexable text. If it exceeded 108 seconds the process had almost certainly hung, which most likely indicates a corrupt file.

ASA5510 - Maximum connect time

Quick question. I have configured the "Maximum Connect Time" as unlimited in my group policy but when a connection is established it shows a "Conn Time Out: 120 minutes".
The connection does get dropped with this timer. Any idea how to actually make it unlimited and why it get sets to 120?
I having a problem with SSL phone clients dropping throughout the day and think this may be the cause.
Thanks

I ended up rebooting the ASA this morning and it fixed the issue. Right away the timeout changed to what I had configured it to be and I was also able to make changes.
Here's the response from TAC. Thanks for helping with this. Much appreciated.
"I am glad that the issue was resolved on a reboot. Might be that svc sessions were stuck in the memory for some reason and the same sessions would be invoked every time you connected rather than tearing it down and creating a new svc session.
Once rebooted I believe the sessions stuck in memory were cleared and new sessions came up as a result the issue vanished. I shall surely update you as I have an update from the devs on this."

HT5624 I've opened up iTunes and went to buy a song, but then it came up with a box saying "this is the first time you are purchasing an item on this computer" even though my computer is authorised. What do i do?

I've opened up iTunes and went to buy a song, but then it came up with a box saying "this is the first time you are purchasing an item on this computer" even though my computer is authorised. Then when i put in my password it takes me to the security questions and i dont know what the answers are. What do i do?

A computer can be authorized to play content purchased using a particular Apple ID (the iTunes Store account). However, being authoized to play content is not directly related to being able to buy content using that Apple ID.
For example, a parent may purchase content for a child and authorize the child's computer to play that content, but that does not mean the child is able to purchase content using that Apple ID.
If this is your Apple ID, you should know the answers to the security questions. If you do not, you'll need to contact Apple iTunes Store customer support
http://www.apple.com/support/itunes/contact/

HT5312 Hi I forgot my security question how I can rest becouse I was going APP this massage pop of in the app page I benn buying app in this iPod may time they are say for first time you are buying apps in iPod pls I need your help to resist my security q

Hi I forgot my security question how I can rest becouse I was going APP this massage pop of in the app page I benn buying app in this iPod may time they are say for first time you are buying apps in iPod pls I need your help to resist my security question

The Three Best Alternatives for Security Questions and Rescue Mail
     1. Send Apple an email request at: Apple - Support - iTunes Store - Contact Us.
     2. Call Apple Support in your country: Customer Service: Contact Apple support.
     3. Rescue email address and how to reset Apple ID security questions.
A substitute for using the security questions is to use 2-step verification:
Two-step verification FAQ Get answers to frequently asked questions about two-step verification for Apple ID.

Message:You are already logged on to the system in the following sessions

Hi Experts,
We are implementing SAP SRM7.0 with Portal integration.
After logging in when we click on the shop link , it is taking us to the new screen and getting message saying "You are already logged on to the system in the following sessions"
and also providing the details of the user.
This is happening for all the users created in portal.
can someone help me to resolve the issue.it would be really appreaciated.
Thanks & Regards,
Prashanth P.

Hi Prashanth,
You can enable multiple login in two ways.
goto SICF and open service.
1.Navigate to default_host->sap->bc->bsp->sap->srm(double click on srm service)
2.Open Error Pages tab and clcik on Configuration button.
3.Check whether check for multiple logon is enabled.
or
goto RZ10
To allow the user to have multiple login in SAP R/3, one have to set the Profile Parameters u201CLogin/disable_multi_gui_loginu201D OR u201CLogin/multi_login_usersu201D.
1. Login/disable_multi_gui_login
Controls whether multiple logins are enabled or disabled. 0 = enable 1 = disable
2. Login/multi_login_users
Here a list [user IDs] can be deposited that would allow users a multiple login even though the multi login is generally disabled. The multiple login information are stored in the table URSR41_MLD.
Note: Select extented administration and clcik display. this is the place to maintain parameters.
Ref:
[Configuration Settings|http://help.sap.com/saphelp_nw70ehp1/helpdata/en/48/3a0623902131c3e10000000a42189d/frameset.htm]
[Login Parameters|http://help.sap.com/saphelp_nw04s/helpdata/en/22/41c43ac23cef2fe10000000a114084/frameset.htm]
I suggest to get basis team support for this.
Regards,
Anand G

I once created an account and changed meanwhile my Apple ID. Now, when trying to log in to iCloud, I get the message: "You are already logged in". I cannot get access to the account in the way, that, for example, the options appear on the right hand side.

I once created an account and changed meanwhile my Apple ID. Now, when trying to log in to iCloud, I get the message: "You are already logged in". I cannot get access to the account in the way, that, for example, the options appear on the right hand side.
What can I do?

Thank you, pvonk, but:
To be more precise: I am talking about the logging-in within the System Preferences on my iMac.
When trying to log in with the old ID, I get no access, i.e. it says "Try again"...-Trying the same with the new one gives me the result I mentioned in my first question...
Now I found out how to do it: I had to erase all accounts-then I could sign in with my Apple-ID. Thanks again.

YOU ARE NOT LOGGED IN AS RELICATION ADMINISTRATOR

Hi,
Freinds i need your help. as i am not able to start replication the error it throws like "YOU ARE NOT LOGGED IN AS REPLICATION ADMINISTRATOR".Please help me as its realy urgent.
Thanks
Ashish
Edited by: ashish 1901 on Feb 11, 2013 9:31 PM

Hi,
Check follow link, you have to log in as repadmin .
<<http://docs.oracle.com/cd/E11882_01/server.112/e10707/rarrepsite.htm#i10539>>
Regards,

IBooks Author in-line tables are being cut off

iBooks Author in-line tables are being cut off at the bottom of a column, instead of flowing to the next column, or moving the entire table.
The entire point of marking a table as in-line, is to get it to move as text is inteserted before it. But when that happens, nothing makes sure the table remains visible. When the top of the table gets pushed to a new column, it reappears intact, but when half the table won't fit, it just disappears below the bottom margin.
How can I prevent that?

Actually I just did. I gave up on this long ago, but with your reply I found a way to make it work. It seems strange, but it works half way.
First draw a text box, then inside of the text box, put your table. Make the text box In-line. If you add rows to your table, you need to make the text box bigger yourself, as it won't grow automatically. When you type in front of the text box, when it won't fit on the column or page, the entire box is moved to the next column or page. That is the half that works.
The half that doesn't work, is that when part of the table won't fit, it would have been nice if the non-fitting portion was moved to the next column or page, with a new header row. Maybe with time, Apple will fix that.
But at least it won't cut off half the table this way.

Users are being logged into the desktop before the mapped drives GPO takes effect

We are using a Group Policy object to map network drives to our users. We are getting reports that the user are being logged into their desktop before the drives are mapped, causing a program that points to the mapped drive to not be able to access
files on that drive. Once the user goes into Computer and double clicks on the drive, they are then able to see the files on the drive and the program is able to access them as well.
We have added another GPO to institute the "Always wait for the network at computer startup and logon" policy to try to fix the issue, but it has not solved our problem.
Thanks in advance for any assistance.

> Once the user goes into Computer and double clicks on the drive, they
> are then able to see the files on the drive
Did you check the "reconnect" option?
Martin
Mal ein
GUTES Buch über GPOs lesen?
NO THEY ARE NOT EVIL, if you know what you are doing:
Good or bad GPOs?
And if IT bothers me - coke bottle design refreshment :))

Officejet Pro 8600. faxes being sent or received are being cut off.

I have a OfficeJet Pro 8600. Most (8 out of 10) faxes being sent or received are being cut off. I or they only receive half the sheet. HELP!!!

Hello bonnie753, and welcome to the HP Forums, I hope you enjoy your experience!
I see you are having fax issues. I would like to assist. Are you using the fax line that come with the printer? Are you plugged direct into a telephone wall jack or are you running into a modem? Do you have anything between the printer and the wall jack on the fax line?
I would suggest performing a power reset. Disconnect the power cord from the printer and the power outlet, then wait 60 seconds. After 60 seconds, plug the printer back in. Ensure you plug the printer directly to a wall outlet. Make sure to bypass any sort of surge protector or power bar.
I would also suggest changing a few settings under your fax menu on the front panel of the printer:
-Go to your setup menu
-Select Fax settings
-Set fax speed to slow
-Turn off Error Correction Mode
Good luck and please let me know the results of your troubleshooting steps. Thank you for posting on the HP Forums!
Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
Jamieson
I work on behalf of HP
"Remember, I'm pulling for you, we're all in this together!" - Red Green.

Problem with Flex print- characters are being chopped off

help please

Bottom of the page characters are being chopped off I am
using
private function doPrint():void {
var myPrintJob:FlexPrintJob = new FlexPrintJob();
myPrintJob.start();
myPrintJob.addObject(printArea1);
myPrintJob.send();
Code is:
<mx:Canvas backgroundColor="white" height="70%"
width="100%" visible="true">

<mx:VBox width="90%" height="100%" visible="true"
id='printArea1' includeInLayout="true">
<mx:VBox paddingLeft="0" paddingRight="0"
horizontalGap="0" >
<mx:HBox>
<mx:VBox width="20%">
<mx:HBox>
<mx:Label styleName="printFont" text="Role:"
width="50"/>
<mx:Label styleName="printFont"
text="{role.selectedItem.DAFYROLE}"/>
</mx:HBox>
</mx:VBox>
<mx:VBox width="40%">
<mx:HBox id='idPrintFacility'>
<mx:Label styleName="printFont" text="Facility:"/>
<mx:Label styleName="printFont"
text="{facs.selectedItem.LABEL}"/>
</mx:HBox>
</mx:VBox>
<mx:VBox width="30%">
<mx:HBox>
<mx:Label styleName="printFont" text="Patient:"/>
<mx:Label styleName="printFont"
text="{patient.selectedItem.LABEL}"/>
</mx:HBox>
</mx:VBox>
</mx:HBox>
<mx:HBox>
<mx:VBox width="20%">
<mx:HBox>
<mx:Label styleName="printFont" text="Filter By:"/>
<mx:Label styleName="printFont" text="{filter.text}"/>
</mx:HBox>
</mx:VBox>
<mx:VBox width="40%">
<mx:HBox>
<mx:Label styleName="printFont" text="From"/>
<mx:Label styleName="printFont"
text="{fromDate.text}"/>
<mx:Label styleName="printFont" text="To"/>
<mx:Label styleName="printFont" text="{toDate.text}"/>
</mx:HBox>
</mx:VBox>
</mx:HBox>
</mx:VBox>
<mx:Repeater id="idCatsx" dataProvider="{myNotes}"
width="100%" >
<mx:HBox id="idCatLabel">
<mx:HBox>
<mx:Label styleName="printFontBold"
text="{idCatsx.currentItem.LABEL}" fontWeight="bold" />
</mx:HBox>
<mx:HBox>
<mx:Spacer width="10"/>
</mx:HBox>
</mx:HBox>
<mx:HBox width="100%">
<mx:VBox width="10%">
<mx:Spacer width="10"/>
</mx:VBox>
<mx:VBox width="90%" height="100%">
<mx:Repeater id="idTipsx"
dataProvider="{idCatsx.currentItem.NOTES}" >
<mx:HBox width="100%" verticalGap="0" >
<mx:VBox>
<mx:Label styleName="printFont"
text="{idTipsx.currentItem.NOTES_DATE}" />
</mx:VBox>
<mx:VBox height="100%">
<mx:HBox height="100%">
<mx:Text width="500" styleName="printFont"
text="{idTipsx.currentItem.NOTE_TEXT}" />
</mx:HBox>
<mx:HBox height="100%">
<mx:Text styleName="bold" width="600"
text="{idTipsx.currentItem.ADDMODIFYTEXT} on
{idTipsx.currentItem.TIME_STAMP} for Assessment
Date:{idTipsx.currentItem.ENCDATE_DATE}" />
</mx:HBox>
</mx:VBox>
</mx:HBox>
<mx:HBox verticalGap="0">
<mx:VBox width="100%" verticalAlign="top" verticalGap="0"
height="100%">
<mx:VBox >
<mx:Repeater id="idHistx"
dataProvider="{idTipsx.currentItem.HIST}">
<mx:HBox width="100%" >
<mx:VBox>
<mx:Spacer width="115"/>
</mx:VBox>
<mx:Canvas height="100%">
<comp:StrikeThroughText width="500" height="100%"
styleName="printFont"
text="{unescape(idHistx.currentItem.NOTE_TEXT)}"/>
</mx:Canvas>
</mx:HBox>
<mx:HBox>
<mx:VBox>
<mx:Spacer width="115"/>
</mx:VBox>
<mx:VBox height="100%" width="100%">
<mx:Text width="600" styleName="bold" text="Notes
{idHistx.currentItem.ADDMODIFYTEXT} on
{idHistx.currentItem.TIME_STAMP} for Assessment
Date:{idTipsx.currentItem.ENCDATE_DATE}" />
</mx:VBox>
</mx:HBox>
</mx:Repeater>
</mx:VBox>
</mx:VBox>
</mx:HBox>
</mx:Repeater>
</mx:VBox>
</mx:HBox>
</mx:Repeater>
</mx:VBox>
</mx:Canvas>

Connecting to a gps being transmitted off a COM po...

how can i connect to a gps being transmitted off a COM port via WLAN using a Nokia E51? The router is located in my vehicle and this is how i use gps navigation through my laptop (GPS is transmitted off the router), but the laptops navigation is dodgy, was wondering if i could use the nokia maps program via my mobile instead.

Try:
String url="jdbc:mysql://www.winnieinternet.com/dbasename";
Connection connection=DriverManager.getConnection(url,"username","password");
Be sure to substitute the bold strings with the real McCoy!
;o)
V.V.

Is there anyway to get your iPhone 5 replaced if it is under warranty, and you are being forced to switch carriers through no fault of your own?

My wife and I both have 64GB iphone 5. I am military and we had to move to a new town. Our service is with AT&T. They called us to tell us we were off network, and we could not use any of the data we pay for every month. And they have the option to terminate our contract at any time. So my question is, if this happens does anyone know if carriers, or apple will switch out your phone, or do we have to buy new ones.

Afraid you will have to buy new phones. Neither Apple nor any carrier I've ever had has considered that sort of thing a condition to replace your devices (AT&T and others have let people out of their contracts without penalty because of moving though).
Before you leave AT&T, ask them to unlock your phones. Then, you may be able to use them with T-Mobile - although T-Mobile is not fully compatable with all iPhone features yet, their service may be an option until you are ready to buy new devices. Also, your iPhone 5's would likely still get you a decent return if you sold them, or just used something like Gazelle (Gazelle's web site just came up with an offer of $380 for 32GB iPhone 5, factory unlocked in flawless condition - $400 for your 64GB devices with the same conditions).
So, you should be able to get enough for your iPhone 5's to pay the subsidized new contract cost of new iPhones with Verizon or Sprint.

Some files in Time Machine are being locked

I run Mountain Lion 10.8.4 on a Mac Mini 2012. Over the past year or so (dating back to my older iMac mid-2010, after which I transferred the data to my current Mac Mini), I've noticed that most of my files in Time Machine are getting locked. The files on my Mac are not locked, but the backed-up versions of the files are locked. The icons have a padlock icon on them. This is NOT due to the "auto-lock documents" feature, since this no longer exists in Mountain Lion.
For instance, my Firefox profile is a good example. Here are two screenshots:
1. Screenshot of my Firefox profile. Everything looks fine.
2. The same profile, except the latest Time Machine backup.
These locks appear in every single backup I have, up until the oldest one. I ran "Repair disk" on Time Machine, which took about 30 minutes, and then made another backup, and this time the newest backup did not have any locks—but all the older backups still had locks. I found this a bit strange, because why would a backup I made AFTER running "Repair disk" be fixed, but the older ones remained unaffected?
Anyway, I hoped that this would fix the problem, but every time I do this, a few weeks later, the problem re-occurs.
So, is there anything more permanent that I can do?

Hey man,
Some things I'd be looking at trying is:
---> Reset ACL's
Boot to Recovery -> Utilities -> Terminal
Then enter the following command to open the Reset Password Utility:
resetpassword
Then select the volume (normally Macintosh HD)
Choose the user account in the "Select the user account:" pop-up menu
Click Reset (ignore all the 'enter new password for user' sections and just click reset at the bottom after selecting the volume and the user
Once that is done, quit Terminal and the Reset Password Utility
Open Disk Utility
---> Verify/Repair Disk + Permissions
Click Macinosh HD on the left of Disk Utility and then click Verify Disk at the bottom right, if it comes up with green text in the white box saying 'The volume Macintosh HD appears to be OK', then you DO NOT need to click Repair Disk, if it finds any errors, you should click Repair Disk
Afterwards, you should click Verify Disk Permissions, once that completes click Repair Disk Permissions (Click this regardless of what Verify Disk Permissions says)
Once that is done, I would follow HT2409 and do a Spotlight Re-Index
Attempt another backup and see how you get on
Regards
MiiCK

ORA-02399: exceeded maximum connect time, you are being logged off

Similar Messages

Maybe you are looking for