Filtering Midi from All to one specific channel

Hi!
I have a midi device that sends midi to all midi channels without any possibility to change this setting on the device, and there is no software or driver to it either. I want to make the midi end up in one specific channel only.
I'm running a system with three different USB-midi devices so a global setting wouldn't work. Logic recognizes all devices separately, so there should be some way to transform all midi-messeges from just this device to one channel, but my question is: how do i do that?
Logic X (10.0.4)
Mac OSX 10.8.5
Thanks!
/Joel

This is a bit embarrassing, but i just found that my device does not at all send to all midi channels, but just to nr 10. So I guess i don't really have a problem anymore... The questing remains unaswered, how ever.
/Joel

Similar Messages

Problem with crystal reports get from All in One Best Practice package

Hi,
I tried to use Financial Statements crystal report download from All in One Best Practice package but encounter the below errors. I followed the guide in Manual Steps for Additional Datasource Creation to set up the additional data source. When i try to preview the report, I tried to set all the value to Null but the error message still appear. I believe this has something to do with the infoset but i not sure how to resolve this. Those report which connect to infoset doesnt seem to work for me.
Errors:
Failed to retrive data from database. (then i press OK)
database connector error: 'no item structure data' (then i press OK)
database connector error: 'RFC_Closed'
Please advice
Thank you

Hi Afzal,
I think you misunderstood. The crystal report i am talking about is the 23 crystal report template i get from All in One Best Practice package. All i need to do is follow the "Quick Guide to impletement SAP Best Practices for Business Intelligence V4.31" to make those template works. For those template that connect to Database type: SAP Table, Cluster or Function, i can make those work. The problem i facing now are those template (example: Financial Statements) that connect to Database type: SAP Info sets. The error i receive are stated in my first post.
Please advice

Scanning from all-in-one printer to Elements

I have a Dell 4000 desktop computer, running Windows 7, 32-bit version, an Epson Stylus SX515W all in one printer/scanner etc, and Photoshop Elements 6. I am told that I cannot scan from my Epson scanner to Elements 6, and that I will need Photoshop Elements 10 to do this.
1. Is this correct?
2. If so, do I have to buy a full version of Elements 10, or can I buy an upgrade?
3. If only an upgrade is needed, what is it called, what will it cost and where can I download it from?
4. If I have to buy the full version of Elements 10, will I need any other software to get it to scan images from my Epson Stylus SX515W?
5. Where do I have to look to find your reply?
Best wishes
Nick Bannister
[email protected]

Hi Nick,
First of all I would like to inform that PSE 6 is not tested on Win 7 and is very old version.
In order to scan from PSE, you will need Twain plugin which is required to scan from within Adobe Applications.
To check if you already have twain or not, follow this :
Navigate to C:\Program Files\Adobe\Photoshop Elements 6.0\Plug-Ins\Import-Export\
If you find a file called "Twain", then you should be able to scan, if not then you have to download Twain from here : http://www.adobe.com/support/downloads/thankyou.jsp?ftpID=4688&fileID=4376
Save the file, unzip it and then follow these steps :
Close PSE 6.
After that , navigate to PSCS5OptionalPlugins_Win_en_US\PSCS5OptionalPlugins_Win_en_US\Optional Plug-Ins\Win32, here you will find Twain_32.8BA file
Copy this file and then paste under : C:\Program Files\Adobe\Photoshop Elements 6.0\Plug-Ins\Import-Export\
Launch PSE 6 and check if you get the option to scan under File >> Import menu
If the above solution doesnt work, then you may have to ugrade to PSE 10.
The price for upgrade is $79.99 and full price is $99.99
You can purchase full and upgrade both from Adobe.com website
Thanks,
Baljeet

SAP faxing from all-in-one (printer/copier/scanner/fax) device

Hi,
We have a all-in-one printer/copier/scanner/fax (Ricoh Aficio 3025) and would like to make use of it to send fax from SAP.
I know how to set it up as a printer. But how should I go about setting it up to send fax?
Can someone help?
Thanks in advance.
Edited by: Sisab Nimda on Jan 8, 2009 2:38 PM

You can't just set it up as a fax... you need a fax server in order to send faxes (I.E. Rightfax)... basically the way it works is that you create a node in SCOT for faxes and send the data to the fax server via SMTP and the fax server deliver the fax to your hardware.
Check the SMTP guide,
http://help.sap.com/SAPHELP_NW04s/helpdata/EN/af/73563c1e734f0fe10000000a114084/content.htm
Regards
Juan

KNOCKING SOUND AT THE STARTING OF PRINTING FROM ALL IN ONE F2418

I AM USING ALL IN ONE F2418 FOR LAST 1 AND HALF YEARS. IT WORKS FINE. BUT SUDDENLY THERE IS A KNOCKING SOUND AT THE BEGINNING OF PRINTING JOB EVERY TIME. I OPEN THE BACK PAPER JAM REMOVAL WINDOW AND SEE THAT THE WHITE GEARS AT THE ROLLER SIDE TRIES TO RUN IN OPPOSITE DIRECTION AND THE SLIP OVER EACH ANOTHER AND MAKING SOUND. THE PRINTER DIAGNOSTICS SAYS EVERYTHING IS OK. WHAT IS THE PROBLEM AND HOW COULD I SOLVE THE PROBLEM.

Hi roamer2007,
Follow the steps in the document below.
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01414872&tmp_task=useCategory&cc=us&dlc=en&lang...
I am an HP employee.
Say Thanks by clicking the Kudos Star in the post that helped you.
Please mark the post that solves your problem as "Accepted Solution"

Faxing from all-in-one printers

Hi,
Has anyone setup SAP faxing via those all-in-one printers?
A typical example is to fax PO to vendors. The vendor fax number can be setup as part of the vendor info.
Does it mean that I set the fax (printer) as a printer in SPAD?
What else should I do to set it up?
Thanks

You can't just set it up as a fax... you need a fax server in order to send faxes (I.E. Rightfax)... basically the way it works is that you create a node in SCOT for faxes and send the data to the fax server via SMTP and the fax server deliver the fax to your hardware.
Check the SMTP guide,
http://help.sap.com/SAPHELP_NW04s/helpdata/EN/af/73563c1e734f0fe10000000a114084/content.htm
Regards
Juan

8500A Plus Scan from all-in-one to Mac over wireless only possible?

I have spent most of the morning reading over the various Forum questions and answers regarding my issue but nothing seems to have addressed my issue directly, perhaps what I want to do is not possible. I'm trying to scan to my Mac (Yosemite 10.10.1) from my Officejet Pro 8500A Plus (referred hereafter as "Officejet") over my wireless network without have to connect to my USB.
Scenarios
A) When I have the Officejet connected to my Mac via USB, when I hit the touchpad Scan -> Computer it shows my Mac and works just fine, and it lists my Windows desktop as "Computer Not Listed".
B) When I have the Officejet connected to my Windows Desktop via USB, when I hit the touchpad Scan -> Computer it shows my Windows Desktop and works just fine, and it lists my Mac desktop as "Computer Not Listed".
C) When I have the Officejet connected to neither computer via USB, when I hit the touchpad Scan -> Computer it doesn't show either computer as an option to scan to and says "No Computer Detected" and has some instructions but they don't help me with my Mac, and for the Windows Desktop it tells me to "Activate Scan to Computer" but when I try to do that, my Windows desktop tells me "Communication cannot be established with the printer".
My main goal is to be able to scan to my Mac from my Officejet via my wireless network, with a secondary goal of doing the same with my Windows Desktop. But right now it only seems to work with one or the other if connected by USB. Is it possible to send a scan to my Mac from the Officejet over the wireless network without having to connect it to my compter via USB?
Your help is much appreciated!

Hello,
Thanks for posting your queries on forum,
Scenarios A, B and C holds good with the product functionality, when the printer is connected via USB cable it will detect only the computer to which its connected and not the other computer.
For you to scan to both the computer yes you can install the printer on wireless network, I dont have the printer here with me but will try my best.
Install all the three devices(Mac, Windows and Printer) to the same network
for Yosemite we dont have the full feature driver available so i would like you to perform Apple Software Update and install the HP Printer driver Version 3.0.
You can also download it from the standalone link " http://support.apple.com/kb/dl907 "
For Mac go to Printers and Scanners>> Click on the (+)symbol>>Add Printers or Scanners
An Add window opens up>> Select your printer(Bonjour multifunction) >> At the bottom under USE section select the HP 8500A printer driver>> Click Add.
It will download and install the required driver
on the Printers and Scanners window>>Select the Printer that we added >> Click on Options & Supplies>> Check if you have Utility Tab.
If yes click on the same>> Open Printer Utility and enable Scan to computer.
Now check on the front panel if it displays your Mac.
Install full feature software for windows and Activate scan to computer on your windows machine and it should display the both computer name on front panel of the printer.
I tried the above steps on my Envy Printer and it works.
Thanks
Although I am an HP employee, I am speaking for myself and not for HP.
Say thanks by clicking the "Kudos! Star" which is on the left
Make it easier for other people to find solutions, by marking my answer with "Accept as Solution" if it solves your issue

Two receiver file adapters : Introduce delay for one specific channel

Hi All,
I have two receiver file communication channels and I want to achive the below :
CC1
CC2 are the two comm channels.
They write some data to the target system for which the sequence of writing it may become important and hence i want to ensure that
CC1 creates the file first.
and then CC2 creates the second file.
Is this possible without BPM?
Regards,
Amol

Amol,
Not sure of the exact flow, but if you have multiple Inbound Interfaces in the Interface Determination [One for each file , etc ] and you have selected the Option Maintain Interface Order at Runtime , the Files will be written to the target sequentially.
I have tried this and every time the Time stamp of the file at the OS level was always different and the first file was written after the next one. Ofcourse the amount of seconds of delay is not under our control but if all you need to ensure is the files are created sequentially then this should do the trick.
Regards
Bhavesh

E-mail from all in one printer

When I try to e-mail a scanned document directly from my HP OfficeJet Pro 8500 wireless A909g it gives me the following message: "Cannot find the remote server. Check server name or use IP address to connect." I have no idea what it means or how to begin to fix it. Any help would be appreciated.
Minto912

It is possible that the printer and the network are not communicating with each other properly. I would power cycle the printer and router to try and correct the scan issue that you are having with the scan function.
If you are connected by Ethernet, disconnect the cord from the printer. Otherwise if wireless, just start following the steps listed below.
Unplug the router from the wall outlet ( most do not have an on/of switch)
Power down printer using power button.
Wait 30 seconds,
Plug router back in and wait for it to be fully up and functioning.
Turn printer back on and once it completes process reattempt scan.
I hope that this helps.
I am a former employee of HP...
How do I give Kudos?| How do I mark a post as Solved?

"Incompatible print cartridge" error from All-in-one Photosmart Premium C309g-m

I just bought a new Photo Black cartridge for my printer, and I'm getting this message on my computer when printing:
"The following print cartridge(s) is/are not intended for use in this printer as it is currently configured.
Photo black"
I already tried reseating and cleaning the cartridge with no change.
Can anybody tell me what this means or offer suggestions on next steps? I really don't want to have to buy another cartridge.
Thanks,
-- Chris

Hi Comptronic; thanks for your suggestion.
I checked my cartridge--it's an HP Photo Black 564, which matches what the site you suggested says. The other 4 cartridges are also 564s, and it's only this one that reports the problem, so I think it's the right one.
When this error occurs, does this mean the printer isn't using the cartridge, or does it still use it anyway? The printouts look about the same despite the error, so I don't know if it's still using the cartridge or compensating with the other 4 cartridges.
Thanks,
--Chris

Acquiring data from all the analog channels of NI-3202 NODE using a single sensor

Hi all,
I would like to know that can i be able to get the data from all the four analog channels of NI-WSN node 3202(analog input node) connecting only single sensor on the analog input and connecting all the remaining analog inputs using wires and also shorting the ground pins corresponding to each analog input pin.
By configuring the each channels like 0.5 sec delay for every analog channels to acquire data. can we get the sensor data from all the channels by doing this. basically here i am trying to increase the minimum sampling rate of the ni-wsn NODE 3202 which is 1s.
I this approach is correct or we cannot do this.
Thanks

Stefan,
In terms of differential and RSE, channels 0-8 should default to differential when using test panels. Differential needs two input channels to function correctly and these channels must be spread apart by 8 channels. (i.e channels 0 and 7 are a differential pair) Channel 13, on the other hand, will default to rse if chosen as the reading channel because there does not exist another channel that is eight away. I am not quiet sure if the virtual channels will default channel 5 into being differential but I will check into it. If it is differential as default then you may run into problems since channel 13 is utilized in both strain gauge reads.
"The second question is, if we can also use the "voltage" setting for measuring strain gauges? we did that in the past, using LabView 6.2."
If you are referring to "voltage" as acquiring a signal with custom voltage with exciation then I would reccomend using example in LabVIEW called Acq Wheatstone Bridge Samples (with Calibration). This can be found by navigating to LabVIEW's example finder and expanding Hardware Input and Output>>DAQmx>>Analog Measurements>>Strain.
I have also included some useful links that may provide more insight into the SCC modules as well. Also, what is the excitation voltage and power that your strain gauges are expecting?
SCC Tutorial Series: SCC-SG0x
SCC Example Series: SCC-SG0x
Using the SCC-SG11 Shunt Calibration Module
Thanks,
Gio L.
Digital Support - Product Manager
National Instruments

All in one HP L7590

Is replacement printhead available for 4 year old all in one HP L7590 and if so is better to purchase new printer instead of print head replacement?

Hi @donnawt,
Welcome to the HP Forums!
I understand that you are wondering how to enlarge a scanned document on an All-in-one HP Officejet Pro L7590. I am happy to help!
From looking at your printer's specifications, HP All-in-One Specifications, there is not an option to enlarge the scan directly on the printer's control panel. What you would need to do, is to use an image editor on the computer in order to enlarge the image, after it has been scanned.
Hope this answers your question, and have a wonderful day!
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping!

All-in-one inventory management linked to business catalyst eCommerce site , amazon, ebay, etsy, etc.

I have an eCommerce website to create for one of my clients.
My client will sell products on his website, ebay, amazon, and maybe event etsy.
What would be the best solution for a all-in-one multi-channel inventory control system?
Is there a way to link the Business Catalyst inventory mgmt system with other sales channels?
Do you suggest a different solution, in order to have an all-in-one control of inventory linked to the website, eBay, Amazon, Etsy and maybe others, so that my client will be able to see which models are selling the most, as well as what is left and what is in need of reordering?
Thank you for the support,
blankiris

I've built systems like this in the past, with any custom solution the devil is in the details, it depends on what you want to do and what you expect. As Liam has pointed out the API is your best friend here, you can develop something that pulls data from BC and puts it where you need.
If you try to do everything at once (all those sites listed) you might find you have problems, I would start with one site first, make any changes you need there and roll out to the other platforms.
Please drop me a PM I would be happy to assist in building.

Is Acrobat Pro right for us. We have an Employee Handbook that needs editing. Some is current pdf, some from an older version. Want to get all into one handbook, have the table of contents automatically adjust and link to specific pages from the ToC.

Is Acrobat Pro right for us. We have an Employee Handbook that needs editing. Some is current pdf, some from an older version. Want to get all into one handbook, have the table of contents automatically adjust and link to specific pages from the ToC.

You can download the trial version (http://helpx.adobe.com/acrobat/kb/acrobat-downloads.html) to convert the PDF back to WORD if you do not have the original. The conversion may not be perfect, but it is typically better than starting from scratch. You may be lucky and get a good result. You might check the settings (in the save screen) to try retain format versus retain text flow. The format version can be a pain to edit since it creates a bunch of text boxes. The flow version may require you to reformat in WORD, but you likely would want to do that anyway.

Just updated my iPhone 4 from IOS 6.1.3 to 7.1.2, I know I am behind the times, but I got there eventually! All seems well but I have one specific problem and hope someone can offer a helpful suggestion.

Just updated my iPhone 4 from IOS 6.1.3 to 7.1.2, I know I am behind the times, but I got there eventually! All seems well but I have one specific problem and hope someone can offer a helpful suggestion.
On opening the app "Find my iPhone" I add my password and sign in, to be greeted with a screen that says;
"Update Find My iPhone. A new version of Find My iPhone is available from the App. Store. You must install the update to continue using the app. Update now"
On hitting the "Update now" button I'm taken to the relevant page on the App Store, to be told that I cannot update as it needs IOS8 to be able to continue and as my iPhone is only a 4 cannot install IOS8.
I'm left going around in circles. The only thing would be to delete the app, but looks like I could not re-install the version I would need. Any body have any thoughts or suggestions? (Apart from updating my phone, I have a few months left on the contract!)
Thanks in advance.

Hi, thanks for the suggestion. I have tried as you suggested, and when opening the "purchased" apps some have the icloud logo next to them, but I only have "OPEN" against "Find My iPhone". When opening it up, it goes through the same routine; needs to be updated before proceeding, and wouldn't update because I don't have IOS8.
Anything else I could try, or am I doomed!
All of your help is much appreciated, thanks

Filtering Midi from All to one specific channel

Similar Messages

Maybe you are looking for