Filtering non required updates from Search Folder
I wish to create a Search Folder for software updates that filters the updates on product, severity, whether it has been superseded or not, whether it has expired and also if it is required or not.
I have managed to create the first four steps fine, but I am having difficulty filtering out non required updates.
Following the instructions provided by Kent Agerlund (http://blog.coretech.dk/kea/creating-a-search-folder-with-all-required-security-updates-in-configuration-manager-2007/) I have selected required in the search folder criteria and added the numbers from
1 to 9 as well as entering ^0 but no results are returned and the search folder is empty. There are a wide range of PC numbers in our environment from single figures right up to the hundreds where PCs do not require updates so in theory the ^0 should
work, but it doesn't.
Would anybody be able to point out where this may be going wrong?
I would never use Required filed to filter the updates since you never know when clients would request for update that never requested by any client (assuming you created SU group and later new clients clients requested) .
its always good to download all the updates with the required criteria except required.
Did you try with [^0] ?
Eswar Koneti | Configmgr blog:
www.eskonr.com | Linkedin: Eswar Koneti
| Twitter: Eskonr
Similar Messages
-
I deleted i photo from search folder, reloaded the software and now I can not drag and drop to the desktop. Help
Look in the Applications folder to see if iPhoto is still there. If it is drag it back to the Finder Sidebar. If it is no longer in the Applications folder post back, you can also look in the Trash it might still be there.
-
Download non-english updates from Windows Update Catalog
Hi, I would like to integrate all updates to install image. However, I must select all language of each updates on Windows Updates Catalog each by each. Any idea to download all updates with differance language as easier?
thanksHi,
I'm afraid that it is inevitable and you have to tick "Select all" for each update if you want to download all language of Updates. Why do you want to integrate all language updates into an image? if you need additional language user
interface, then you just need language pack added to your image.
Yolanda Zhu
TechNet Community Support -
When I do connect the phone. iTunes says back up was interupted and to click to resume, it just then hangs on time remaining without a number? If I dissconnect during this I get Error (-10) I can then access my phone in iTunes and my phone does work? In iTunes I can see all the things that were on my phone, all the Apps/Music/Phots/Other etc.. with their relevant amount (Music 8.2gb/Apps 2.1gb etc...) in the coloured bar along the bottom, so if I then click Apply you would think it would just copy them to the phone. It doesn't as soon as you click Apply the multi coloured bar and catagories changes just to 'Other' and (1004mb) and only the basics are on my phone. No music, no additional Apps and only Camera Roll, not photos from chosen folder.
Any suggestions would be great.When I do connect the phone. iTunes says back up was interupted and to click to resume, it just then hangs on time remaining without a number? If I dissconnect during this I get Error (-10) I can then access my phone in iTunes and my phone does work? In iTunes I can see all the things that were on my phone, all the Apps/Music/Phots/Other etc.. with their relevant amount (Music 8.2gb/Apps 2.1gb etc...) in the coloured bar along the bottom, so if I then click Apply you would think it would just copy them to the phone. It doesn't as soon as you click Apply the multi coloured bar and catagories changes just to 'Other' and (1004mb) and only the basics are on my phone. No music, no additional Apps and only Camera Roll, not photos from chosen folder.
Any suggestions would be great. -
Office 2013 search folder not showing any updates?
Hi,
I am trying to create a search folder for Office 2013 updates but nothing is populating within the folder.
I have ticked the "Search all folders" box too and still nothing? any ideas at all? All of the other search folders are working...
Bulleting ID = MS
Product = Office 2013
Superceded = No
Expired = No
Any help would be appreciated, thanks.
Niall
Niall CarterHi,If you remove the Bulletin ID, does it work then? the search above searches for a buletin called "MS" and there are none.
Regards,
Jörgen
-- My System Center blog ccmexec.com -- Twitter
@ccmexec -
Unzip files from a folder which is updating regularly using multithreading
Hi All,
I have acode which unzip all the files from a folder .This code picks up all the zipped files at a time and then unzip it and write them to another folder but now my requirement is changed ,suppose the source folder where all the zipped files are present is refreshed or updated with new zipped files regularly then how can I implement in my code multithreading to get several files by threads and send it for unzipping.
Please suggest with some example or edit my code.
package com.myprojcet;
import java.io.File;
import java.io.FileInputStream;
import java.io.FileOutputStream;
import java.io.IOException;
import java.io.OutputStream;
import java.util.zip.ZipEntry;
import java.util.zip.ZipInputStream;
public class Main {
* Extracts a zip file
public void extractZipFile() {
try {
String zipFileName = "C:\\soft\\test"; //Source folder for zipped files
//Create input and output streams
File SourceDir = new File(zipFileName);
File[] zipFiles = SourceDir.listFiles();
ZipInputStream inStream = null;
OutputStream outStream = null;
ZipEntry entry;
byte[] buffer = new byte[1024];
int nrBytesRead;
//Get next zip entry and start reading data
for(int i=0; i < zipFiles.length; i++) {
inStream= new ZipInputStream(new FileInputStream(zipFiles));
while((entry = inStream.getNextEntry()) != null) {
outStream=new FileOutputStream("C:\\soft\\test2\\"+entry.toString()); //destination folder for unzipped file
while ((nrBytesRead = inStream.read(buffer)) > 0) {
outStream.write(buffer, 0, nrBytesRead);
//Finish off by closing the streams
outStream.close();
inStream.close();
} catch (IOException ex) {
ex.printStackTrace();
* @param args the command line arguments
public static void main(String[] args) {
new Main().extractZipFile();
Thanks
Sumit
Edited by: user8687839 on Feb 27, 2012 11:00 PMBut my question is that if in a source folder we have several files which are in zipped format and the folder is getting updated every min (say) with new zipped files (which are dumped from some outside environment).I need to unzip all the files present in the folder ,if new one comes there then also check for the new zipped file and unzip it.You don't need to keep re-stating that.
I had written a code for unzipping a file from a folder (thinking the folder is not updated everytime).Or that.
Now I am thinking of using threads because if I create suppose 5 threads and every threads poll the source folder and pick up a zip file ,send it for unzipping it and again poll the source folder for any new entries?Or that.
If using the threads here hits performace then what should I use?Err, what you presently have?
Provide me any sample code or link that would be more useful.You've already written it. -
Saved Search Folder Doesn't Update
I've created a saved search folder, but it's not updating properly when I add new files to my machine. Here are the search terms:
(kMDItemFSName ="*") && (kMDItemFSName !="temp") && (kMDItemFinderComment != "Ignore") && (kMDItemFSCreationDate > $time.today(-30)) && (kMDItemContentType = public.folder)
Occasionally it works, but most of the time it seems stuck showing only folders it'd perviously found.Something went seriously awry in the date saved in the Raw Query part of user generated SavedSearches. See my reply to this post:
http://discussions.apple.com/message.jspa?messageID=10292658#10292658
What I did was to open my own RecentApps SavedSearch in Property List Editor and replace the faulty RawQuery with the one I copied from Apple's canned search. Not very elegant!
Be sure to let Apple know this is happening to you, and it matters:
http://www.apple.com/feedback/macosx.html
The only real fix has to come from them.
Francine
Francine
Schwieder -
is there any way to update to OS X from a non-aluminum Macbook from 2008 that has the 2 gb of memory and snow leopard installed, with 8 gb of free space?
The Early 2008 MacBook can only go up to Lion...the compatibility requirements for Mountain Lion and Mavericks are the same http://www.apple.com/osx/specs/ which says Late 2008 MacBook.
-
Attempting to update from 10.1 to 10.4 I get this msg:
"The feature you are trying to use is on a network resource that is unavailable. Click OK to try again, or enter an alternate path to a folder containing the installation package “iTunes.msi”. ?
I locate the file in "Program Files\iTunes" and change the path. I then get this:
"The file ’C:\Program Files\iTunes is not a valid installation package for the product iTunes. Try to find the installation package ‘ iTunes.msi ’ in a folder from which you can install iTunes."
What folder will work ???Unfortunately, this sort of trouble has gotten more complicated to deal with ever since Microsoft pulled the Windows Installer CleanUp utility from their Download Center. First we have to find a copy of the utility.
Let's try Googling. (Best not to use Bing, I think.) Look for a working download site for at least version 3.0 of the Windows Installer CleanUp utility. (The results from mydigitallife and Major Geeks are worth checking.)
After downloading the utility installer file (msicuu2.exe), scan the file for malware, just in case. (I use the free version of Malwarebytes AntiMalware to do single-file scans for that.)
If the file is clean, to install the utility, doubleclick the msicuu2.exe file you've downloaded.
Now run the utility ("Start > All Programs > Windows Install Clean Up"). In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove".
Quit out of CleanUp. Restart the PC, and try another iTunes install. Does it go through properly this time? -
My computer is not taking the new update from itunes. It states that i do not have the requirements to finish the Install and that it was Installed incorrectly. I have never had any issue with any previous update regarding iTunes. What is the issue?
Hi there Double2D,
You may find the troubleshooting steps in the article below helpful.
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
-Griff W. -
I have a scenario, ECC-PI-Message broker. ECC sending IDOC to PI, PI execute mapping and sends data to Message borker(thru JMS channel).(with almost one to one mapping)., IDOC(AAE)-PI-JMS. Now my requirement is., from PI after mapping we need to create file with same data what ever send to Message broker and put the file in SAP folder without touching mapping. Is it possible? Please advise with the steps. We are using the ICO for this senario. Quick response is appriciated.
Hi Pratik,
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/502991a2-45d9-2910-d99f-8aba5d79fb42?quicklink=index&overridelayout=true
This link might help.
regards
Anupam -
Aperture does not recognize that there are images to be imported on an SD card. My workaround is to copy the images from the SD card to a folder and then import the images from the folder. Aperture also imports incredibly slowly after the update to 3.4
Check your Import settings in the Import Panel, i.e. all that might exclude the image type you want to import:
If you did not exclude any file types, and still Aperture will not import, remove your ImageCapture preferences fro your user library:
To remove the image capture preferences:
If Aperture is running, quit Aperture, and log off and on again.
Open your user library from the Finder's Go menu: Hit Command Shift G (⌘⇧G) and then type in: ~/Library/Preferences/ then hit return.
In the window that opens remove "com.apple.ImageCapture.plist"
and look into the subfolder "ByHost": if there are files named com.apple.ImageCapture something .plist remove them too.
then try again.
And if that still does not help, remove the Aperture preferences as well:
~/Library/Preferences/aperture.plist
Regards
Léonie
P.S. in MacOS Lion and later the user library ~/Library is hidden by default.
You can reveal it also from the Finder's "Go" menu:
Finder > Go, then hold down the options ⌥ key, until the Library appears in the drop-down menu, select it and open the Library folder. Then go to the "Preferences". -
Importing and Updating Non-Duplicate Records from 2 Tables
I need some help with the code to import data from one table
into another if it is not a duplicate or if a record has changed.
I have 2 tables, Members and NetNews. I want to check NetNews
and import non-duplicate records from Members into NetNews and
update an email address in NetNews if it has changed in Members. I
figured it could be as simple as checking Members.MembersNumber and
Members.Email against the existance of NetNews.Email and
Members.MemberNumber and if a record in NetNews does not exist,
create it and if the email address in Members.email has changed,
update it in NetNews.Email.
Here is what I have from all of the suggestions received from
another category last year. It is not complete, but I am stuck on
the solution. Can someone please help me get this code working?
Thanks!
<cfquery datasource="#application.dsrepl#"
name="qryMember">
SELECT distinct Email,FirstName,LastName,MemberNumber
FROM members
WHERE memberstanding <= 2 AND email IS NOT NULL AND email
<> ' '
</cfquery>
<cfquery datasource="#application.ds#"
name="newsMember">
SELECT distinct MemberNumber
FROM NetNews
</cfquery>
<cfif
not(listfindnocase(valuelist(newsMember.MemberNumber),qryMember.MemberNumber)
AND isnumeric(qryMember.MemberNumber))>
insert into NetNews (Email_address, First_Name, Last_Name,
MemberNumber)
values ('#trim(qryMember.Email)#',
'#trim(qryMember.FirstName)#', '#trim(qryMember.LastName)#', '#
trim(qryMember.MemberNumber)#')-
</cfif>
</cfloop>
</cfquery>
------------------Dan,
My DBA doesn't have the experience to help with a VIEW. Did I
mention that these are 2 separate databases on different servers?
This project is over a year old now and it really needs to get
finished so I thought the import would be the easiest way to go.
Thanks to your help, it is almost working.
I added some additional code to check for a changed email
address and update the NetNews database. It runs without error, but
I don't have a way to test it right now. Can you please look at the
code and see if it looks OK?
I am also still getting an error on line 10 after the routine
runs. The line that has this code: "and membernumber not in
(<cfqueryparam list="yes"
value="#valuelist(newsmember.membernumber)#
cfsqltype="cf_sql_integer">)" even with the cfif that Phil
suggested.
<cfquery datasource="#application.ds#"
name="newsMember">
SELECT distinct MemberNumber, Email_Address
FROM NetNewsTest
</cfquery>
<cfquery datasource="#application.dsrepl#"
name="qryMember">
SELECT distinct Email,FirstName,LastName,MemberNumber
FROM members
WHERE memberstanding <= 2 AND email IS NOT NULL AND email
<> ' '
and membernumber not in (<cfqueryparam list="yes"
value="#valuelist(newsmember.membernumber)#"
cfsqltype="cf_sql_integer">)
</cfquery>
<CFIF qryMember.recordcount NEQ 0>
<cfloop query ="qryMember">
<cfquery datasource="#application.ds#"
name="newsMember">
insert into NetNewsTest (Email_address, First_Name,
Last_Name, MemberNumber)
values ('#trim(qryMember.Email)#',
'#trim(qryMember.FirstName)#', '#trim(qryMember.LastName)#', '#
trim(qryMember.MemberNumber)#')
</cfquery>
</cfloop>
</cfif>
<cfquery datasource="#application.dsrepl#"
name="qryEmail">
SELECT distinct Email
FROM members
WHERE memberstanding <= 2 AND email IS NOT NULL AND email
<> ' '
and qryMember.email NEQ newsMember.email
</cfquery>
<CFIF qryEmail.recordcount NEQ 0>
<cfloop query ="qryEmail">
<cfquery datasource="#application.ds#"
name="newsMember">
update NetNewsTest (Email_address)
values ('#trim(qryMember.Email)#')
where email_address = #qryEmail.email#
</cfquery>
</cfloop>
</cfif>
Thank you again for the help. -
Firefox launching from temp folder after update
Not sure if this is completely normal or not, or if it's even a problem. After updating from 3.6.26 to firefox 10 my firefox, according to an antivirus log, kept launching from a temp directory like appdata\local\temp\(randomtextstring).tmp\nonlocalized\firefox.exe instead of its normal program files (x86)\mozilla firefox directory. Trying to delete history each time i'd get 10+ plugin-container.exe's popping up, forcing me to close firefox because it would just hang. I decided to just reinstall firefox 3.6.26 however I am still seeing that it is starting from a temp folder, even though the startup path is located at program files (x86)\mozilla firefox. firefox.exe in task manager is located in
program files (x86)\mozilla firefox, but according to the log I'm looking at it starts and exits from appdata\local\temp\(randomtextstring).tmp\nonlocalized\firefox.exe
Sorry if this seems like a stupid question, I'm just curious if this means it has not installed properly or if this is completely normal.I reinstalled 3.6 after I was having problems with 10. I already tried another reinstall and it does the same thing.
Earlier I received a firefox message that a new version of 3.6 was available (3.6.26) so I upgraded. I saw then in the log that firefox was launching as firefox.exe moz-callback or something, so i decided just to upgrade to the newest version of firefox, that's when I started seeing it launch from the improper directory.
The log I am reading from simply shows ALL .exe's that have launched and closed in order, showing it's location path, and what program opened/closed it. The temp directory and the random text string.tmp file it shows it's launching from is a random folder created by firefox during the installing and setup process. Firefox itself starts and exits perfectly fine and doesn't continue running in the background. I'm thinking it's either a logging problem with the AV's execution history log or something was wrong during installing, even though it happens each time I reinstall. -
I install latest update from my ipad 2, after the upgrade tablet running slowly. Probably the system requirements too high for my device. I think that users with older models should be able to install IOS 6.x.x on their devices or consider buying devices from other manufacturers ...
People are dissatisfied with the new update a lot, including some of my friends and acquaintances. Is it reasonable to wait until Apple implements the possibility to return to Ios Ios 6 to 7? And how soon it can be done?
Sorry for my english, i am from Russia.I have a similar issue. I recently purchased an iPad Mini, and I started off by backing it up from the apps I had on my iPhone. Now, I have a number of apps that never downloaded and that I don't want on the iPad. Some of these are apps that I don't need, while others are the iPhone versions of apps. There are something like 23 apps that I have no use for, but iTunes tries to install every time I connect. I've also tried clicking the 'Will Install' buttons. There's no way to delete these apps from the iPad without first installing them, as far as I can see, and there's no way to NOT install them, in iTunes.
It''s not just annoying, it's causing problems with installation of larger files and movies. Now, every time I sync to the computer, I get a warning that I'm over capacity by 580 MB, and larger apps will not install! Clicking Revert and a bunch of other things doesn't work, either. And I can't just delete some of the apps, because I or my wife use them on our phones!
Maybe you are looking for
-
Mail crashes EVERY time I try to open a message
Hi I started having problems with Mail today when it started to crash EVERY time I tried to click a message header whether it is in inbox or any remote folders connected via IMAP. Mail is still capable of connecting to servers and grabbing headers. I
-
i bought my phone from a friend who lived in china and would now like to change the phone to allow me to use the internet in south africa
-
Maintain Business Place for documents without Business Place
Dear All, Pls tell me how to update Business Place in documents which are posted without entering Business Place field. Pls tell me how to achieve this without using Validations & Substitutions. Any table entries can be maintained for this? Kindly gu
-
I am unable to open pdf's. I was able to open files at one time however, currently, when I open the document I get a dialog box that tries to convert the file into a languge other than english. I've tried the help function but it doesn't work. Any
-
Download to CSV div id="report_ in file
When I have a report with a download to csv option, occasionally I get div tags starting on the first record and after the last record. I normally end up deleting and recreating the report region but is there any way of identifying when these will oc