FIM 2010 R2 SP1 Reporting ETL Process for SCSM 2012 R2?

Hi,
First question: is FIM 2012 R2 SP1 Reporting supported on System Centre 2012 R2 or only System Centre 2012? I have followed the MS FIM Reporting deployment guide, and everything seems to work, except the ETL process (2nd question below)
Second question: if it is supported, than how do we get the ETL process defined here (http://technet.microsoft.com/en-us/library/jj133844%28v=ws.10%29.aspx) to work with these versions? The powershell script provided doesn't work on SC 2012 R2.
Third question: how do we force the whole process so we can view data in the FIM Reports? as at present there is no data in any of the reports even after I manually ran these SCDW jobs: Extract_dw_SCSMServer, transform.common, load.common
Thank you,
DW

Although it could work, if not officially announced as supported - it is not "officially" supported, so you're deploying it on your own risk and MS won't help you if any problem occurs. Please be aware of that.
Keep trying

Similar Messages

FIM 2010 R2 SP1 with SCSM 2012

I know that FIM 2010 R2 SP1 now claims support for SCSM 2012. FIM Reporting allows us to use a free copy of SCSM / DW for just the purpose of reporting services. Does this only apply to SCSM 2010 or does this include SCSM 2012 as well? I just want to make
sure that we don't install SCSM 2012 assuming that it's free when in reality only SCSM 2010 is free. This issue came about because SCSM 2010 did not require a product key, but SCSM 2012 does.
Thanks,
Mark
Mark Creekmore - BlueVault Software http://www.bluevaultsoftware.com

On Fri, 4 Jul 2014 08:27:39 +0000, diramoh wrote:
on Microsoft TechNet link, we have the following Details:
Reporting: Unique key constraint violation when running reporting synchronization jobs
If you attempt to run reporting synchronization jobs on a default System Console System Manager SP1 (SCSM SP1) installation, you may receive the error “Violation of UNIQUE KEY constraint ‘idx_ManagedEntityManagedTypeId’. Cannot insert duplicate key…”.
To address this issue, please make sure you have the following updates installed on your System Center Service Manager Management Server, Data Warehouse Server, and any machines that have the System Center Service Manager Console installed on them:
1. KB2542118 <http://support.microsoft.com/kb/2542118>– System Center Service Manager Cumulative Update 2
2. KB2542118 <http://www.microsoft.com/download/en/details.aspx?id=26631>– System Center Service Manager FIM 2010 R2 Hotfix
Note: *You must have the SCSM Cumulative Update 2 installed before installing KB2542118*
Shim is asking about the product key. The above has nothing at all to do
with his question.
Paul Adare - FIM CM MVP
What should I do ......the machine can't find the program
iexplorer.exe...
Breathe a sigh of relief. -- Arthur Hagen in no.www

SharePoint Foundation 2013 SP1 for Microsoft Forefront Identity Manager (FIM) 2010 R2 SP1

For subsequent installation FIM 2010
R2 SP1, I must create a Web application
with the classical method of authentication. According to
Microsoft (http://technet.microsoft.com/en-us/library/jj863242(v=ws.10).aspx),
it is created using PowerShell the following commands:
$ AdminCredentials = Get-user domain
\ contosoAdmin
• $ adminManagedAccount = New-SPManagedAccount -Credential $ adminCredentials
• New-SPWebApplication -Name "FIM SharePoint Web Application" -ApplicationPool "FIMAppPool" -AuthenticationMethod "Kerberos" -ApplicationPoolAccount $ adminManagedAccount -Port
80 -URL http://www.contoso.com
But these commands do not specify an account for
Web services applications,
and services of that applications will run under the account
under which installed Sharepoint. As a result,
the Administration Console Sharepoint error occurs:
the application service account has
local administrator rights. But it should not
be.
I ask for advice on how to solve this problem.

Where I can found ULS Log and configuration details as well?
I have errors:
Accounts used by application pools or service identities are in the local machine Administrators group.
One or more web applications are configured to use Windows Classic authentication.
When I create a Web application through the
web interface, and select
the account for the application pool and application services
(see. Screenshot). So I decided
that the account application services
become account under which installed
Sharepoint, which has local administrator rights.
And the application pool account to the
administrators group is not included. Therefore,
the question arises: what kind of account
reports error ::
there is only one Web application (but
before I create and delete the same):
New-SpWebApplication
DisplayName Url
Sharepoint-FIM
http://www.contoso.com
help to solve the error, please.

How do I add my Custom Workflow Activity to FIM 2010 R2 SP1 installed on Windows 2012 server?

Hellos.
I have tried and failed to add my custom.dll into the Windows Server 2012 GAC.
We have a version of FIM 2010 R2 Sp1 running on Windows Server 2008 R2 and that was no problem. There seemed to be a gacutil.exe present on the system which added my assembly.
I cannot find gacutil.exe on the Windows 2012 Server.
I have downloaded and installed Windows SDK for Windows 8. However, when I try the gacutil.exe /i <myCustom.dll> nothing seems to happen.
Are there any guidelines how to add custom workflow activities to FIM when installed on a Windows Server 2012 system?
TIA
*HH

Well yes. It is fine when FIM is hosted on Windows Server 2008 R2.My difficulty is that I am using FIM 2010 R2 Sp1 and Windows Server 2012. No GACutility executable.
However, the problem has been resolved. Powershell can be used to modify the assemblies.
I opened a RunAs Administrator PS session. My assembly is in folder c:\Temp
Using Windows Explorer I browsed the folder c:\windows\assembly and noted the System.EnterpriseServices entries: version (2.0.0.0) and public key token (b03f5f7f11d50a3a)
(My version is 2.0.0.0 because when installing FIM and SharePoint 2013 the instructions I used suggested setting .Net version to be 2.0)
These powershell commands got me going...
PS C:\temp> [System.Reflection.Assembly]::Load("System.EnterpriseServices, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a")
GAC Version Location
True v4.0.30319 C:\Windows\Microsoft.Net\assembly\GAC_64\System.EnterpriseServices\v4.0_4.0.0.0__b03f5f7f11d50...
PS C:\temp> $publish = New-Object System.EnterpriseServices.Internal.Publish
PS C:\temp> $publish.GacInstall("c:\temp\RunPowershellLibrary.dll")
PS C:\temp>
PS C:\temp>
PS C:\temp> iisreset
Amazingly I can see the assembly RunPowershellLibrary in my Windows 2012 GAC. :-)
Also, what is more cheering is that the custom activity actually works with FIM 2010 R2 Sp1.

Upgrade FIM 2010 R2 Sp1 Databases from SQL 2008 R2 to SQL 2012

Hi,
I want to upgrade my SQL from 2008 R2 to SQL 2012.
FIM Databases
1) FIMService Database
2) FIMSynchronizationService Database
Mentioned above are my FIM databases running on SQL server 2008 R2 . Now I was looking for some article which could tell me if SQL can be upgraded without affecting my existing databases of FIM or if i can move these databases to a new server having SQL
2012
Activity I want to perform : Create a fresh Server of SQL 2012 and move my FIM 2010 databases over it by restoring the backups. but as per the link below it seems not possible!
http://social.technet.microsoft.com/wiki/contents/articles/5465.fimilm-how-to-move-the-backend-sql-server-synchronization-service-database.aspx

Hi Shivam,
Please take a look here: Release Notes for Forefront Identity Manager 2010 R2 SP1.
In the table you have tasks to upgrade SQL for FIMService and FIMSych.
FIM Service:
Upgrade FIM Service servers to FIM 2010 R2 SP1
Stop FIM Service on all servers
Backup Database [in case rollback needed]
Upgrade SQL to SQL Server 2012
Start FIM Service on all servers
FIM Synch:
Upgrade FIM Sync to FIM 2010 R2 SP1
Stop FIM Sync
Backup Database [in case rollback needed]
Upgrade SQL to SQL Server 2012
Start FIM Sync
If you are not making in-place upgrade, I would do something like here:
Stop FIM Services
Backup the databases at SQL 2008
Restore backed up databases on SQL 2012
Make sure SQL Agent Jobs are moved (FIMService)
Make sure Broker is enabled on FIMService database
On FIM machines create SQL alias using cliconfg utility. Alias should have the name of "old(sql2008) SQL" and point to new name/instance.
Start FIM Services - they would use "old" name to connect, but it would be translated to new location. So they would start.
If you found my post helpful, please give it a Helpful vote. If it answered your question, remember to mark it as an Answer.

FIM Reporting ETLScript PowerShell Script for SCSM 2012?

Hi,
The FIM Reporting Deployment Guide is great, however on a few occasions it forgets to mention where you meant to execute things (http://technet.microsoft.com/en-us/library/jj133855(v=ws.10).aspx) .
For example, if it wasn't for the screenshot in the article, we would not have known that we need to run the ETLScript from the FIM Service/Portal server.
Everything until the ETLScript has thus far worked; and we have deployed the Service Manager 2012 console on the FIM Service/Portal server (since we are using SCSM 2012 for FIM Reporting).
However, it appears that the ETLScript (in the deployment guide) has been written for SCSM 2010.
So, has Microsoft or anyone published an updated SCSM 2012 ETLScript script?
Thanks,
SK

Could this be it?
http://gallery.technet.microsoft.com/PowerShell-Script-to-Run-a4a2081c

FIM 2010 R2 Sp1, Windows 2008 R2 SP1 and Recycle Bin issues

Hi,
We are running FIM 2010 R2 Sp1 (build 4.1.3613.0)
Also running Windows 2008 R2 Forest and Domain functional level environment. (Windows Server 2008 R2 SP1 on all DCs). The previous Recycle Bin hotfix https://support.microsoft.com/en-us/kb/979214/ fails to install since we are already running WS08 R2 SP1
on all the DCs.
During deprovisioning, when a user is deleted from the source HR system, FIM deletes the object from AD, FIM Sync & Portal.
FIM also manages a FIM Portal group, where membership is assigned manually. This membership is then updated in AD.
When a user (who is part of this group) is deleted in HR, FIM deletes it from AD, FIM Sync, FIM Portal, FIM also removes user from FIM Portal group. The user is also removed from the AD group (by FIM group object membership attribute flow to AD)
...however, on the next AD Export, FIM fails to update the same group and complains about this very same user (CD Error) and lists the user as: CN=username\0ADEL:GUID, CN=Deleted Objects,DC=domain,DC=com
It appears that there is a problem with FIM and the Recycle Bin again?
Are there any new Recycle Bin/FIM hotfixes ?
Thanks,
SK

May I suggest you review the following:
Is the AD MA user account part of the Domain Admins group? If yes, please remove it from this Group
Verify that the "CN=Deleted Objects" container has not somehow been included in the AD MA OU scope

Where can I download SDK for SCSM 2012 RTM? (version 7.5.1561.0)

Where can I download the SDK for SCSM 2012 RTM (version 7.5.1561.0)?
I have an older SCSM 2012 system that I'm not sure what SDK is compatible with it.
The reason is that I need to run SMLets on that older version in PowerShell.
Thanks!

Hey
Are you looking for the SDK binaries? They are located in the "SDK binaries" folder in the SCSM installation folder of the Management Server.
Cheers
Marcel
Marcel Zehner // Blog --> http://marcelzehner.ch // Twitter --> @marcelzehner // Business --> http://www.itnetx.ch

Supported platforms in FIM 2010 R2 Sp1

I have FIM 2010 R2 Syncronization Server running on Windows 2008R2 OS. The available Galsync connectors that we have are Exchange 2003, 2007 and 2010. The FIM sync server runs on Exchange 2010 environment but in order to fulfill the requirements of establishing
a connector with Exchange 2007 we followed the reference "http://social.technet.microsoft.com/wiki/contents/articles/3457.fim-how-to-export-to-an-exchange-2007-server-with-synchronization-server-in-an-exchange-2010-domain.aspx"
to install Exchange 2007 EMC on the FIM Sync server. Now we have a new connector lined up to be added on our FIM server which is running on Exchange 2013 environment. I need to know how can we perform an upgrade from FIM 2010R2 to FIM 2010R2 SP1 without breaking
the existing configuration especially with the connectors running legacy Exchange (2003 and 2007).
Jimmy George

Yes, you can upgrade to SP1 without impacting the legacy connections.
Thanks, Brian

Error during post-installation step of UR4 for SCSM 2012 R2

Hello experts,
When attempting to execute the process documented in the "Resynchronize System Center Operations Manager mount point data" section of the UR4 installation instructions, we run into the following error. Has anyone
else encountered this error? What exactly is this PS1 script attempting to fix?
Thanks!
Error:
PS C:\program files\microsoft system center 2012\Service Manager\powershell>.\OMCIConnector_SyncMetadata_UpdateTimestamp.PS1
Processing for the OM CI Connector number #1 .....
Connector FullName is Microsoft.EnterpriseManagement.LinkingFramework.OpsMgrConnector.Config:bad1b127-5ea0-43f6-916d-2c5ea7e26789
Error: OMCIConnector_SyncMetadata_UpdateTimestamp.ps1 script execution failed!
Caught an exception:
Exception Type: System.InvalidOperationException
Exception Message: There is an error in XML document (25216, 18).
Inner Exception Message: System.Xml.XmlException: Unexpected XML declaration. The XML declaration must be the first node in the document, and no white space characters are allowed to appear
before it. Line 25216, position 18.
at System.Xml.XmlTextReaderImpl.Throw(String res, String arg)
at System.Xml.XmlTextReaderImpl.ParsePI(StringBuilder piInDtdStringBuilder)
at System.Xml.XmlTextReaderImpl.ParseDocumentContent()
at System.Xml.XmlReader.ReadEndElement()
at Microsoft.Xml.Serialization.GeneratedAssembly.XmlSerializationReaderSyncMetadata.Read8_SyncMetadata(Boolean isNullable, Boolean checkType)
at Microsoft.Xml.Serialization.GeneratedAssembly.XmlSerializationReaderSyncMetadata.Read9_SyncMetadata()

When installing the VS Isolated Shell, make sure the actual binaries (found on the root drive or where you extract the web installer) are installed. This will resolve the above error and also the Prerequisite issue that a lot of people are coming across.
Regards, Zoeb Khan

CRVS 2010 beta - Crystal Reports Beta 2 for VS 2010 fails to start

Right after I install it. I try to add a Crystal Reports item to my project and get an error indicating that the temporary report (.rpt) file can not be oppened. When I click OK I get a seccond error message "invalid key".
I tried reinstalling Crystal Reports and then Visual Studio with out success. This was working on the same laptop when using Vista, now I have Windows 7. But on my Windows 7 PC works ok.
Please help
Formated subject to meet the rules
Edited by: Don Williams on Oct 2, 2010 11:06 AM

Have you search forums for possible solutions before posting?
Typically this is caused by not setting/using the 4.0 framework ( not the client version ) or instlaling with DEP and UAC disabled.
Make the changes to security and then do a repair install.
Thank you
Don

Crystal Reports background processing for SAP Business One 8.8

Dear Partners,
I have an SDK program developed in SAP Business One SDK that works in 2007, it calls crystal reports externally and can be executed as a background task using the windows schedular or from the command prompt.
My problem is it does not work under SAP Business One SDK 2008 PL18 with SQL Server 2008, Visual Studio 2008.
I receive the following message after this line in my code,"oReport.PrintToPrinter(CopyNo, False, 0, 0)".
'CrystalDecisions.CrystalReports.Engine.LogOnException: Logon failed.
Error in File XX_Report_Ver_0.01 {1A6620A2-5D73-49D2-9347-32ED068AA64E}.rpt:
Unable to connect: incorrect log on parameters. ---> System.Runtime.InteropServices.COMException (0x8004100F): Logon failed.
Error in File XX_Report_Ver_0.01 {1A6620A2-5D73-49D2-9347-32ED068AA64E}.rpt:
Unable to connect: incorrect log on parameters.
   at CrystalDecisions.ReportAppServer.Controllers.ReportSourceClass.GetLastPageNumber(RequestContext pRequestContext)
   at CrystalDecisions.ReportSource.EromReportSourceBase.GetLastPageNumber(ReportPageRequestContext reqContext)
   --- End of inner exception stack trace ---
   at CrystalDecisions.ReportAppServer.ConvertDotNetToErom.ThrowDotNetException(Exception e)
   at CrystalDecisions.ReportSource.EromReportSourceBase.
   at CrystalDecisions.ReportSource.EromReportSourceBase.GetLastPageNumber(ReportPageRequestContext reqContext)
   at CrystalDecisions.CrystalReports.Engine.FormatEngine.PrintToPrinter(Int32 nCopies, Boolean collated, Int32 startPageN, Int32 endPageN)
   at CrystalDecisions.CrystalReports.Engine.ReportDocument.PrintToPrinter(Int32 nCopies, Boolean collated, Int32 startPageN, Int32 endPageN)
   at BGProductionRpt.ECR_Common.ECR_PrintReport(Int32 CopyNo) in C:\SDK Development\8.8\test\XX_Rpt\ECR_Common.vb:line 485'
My Question is what Crystal Reports libraries or other method should I be using ?
Crystal Reports 2008 for SAP Business One eg. 51038978.zip - downloaded from portal obviously dosn't contain the CrystalDecisions libraries.
Crystall Reports 2008 - cr2008_sp3_fullbuild, cr2008fp33.exe, cr2008fp33_mm, cr2008fp33_clickonce - also download from the portal, the cr2008_sp3_fullbuild does contain the crystal decisions libraries.
Finally other choices are crystal reports included with the visual studio 2008 and crystal reports full version direct from Business Objects.
I have tried different versions of crystal decision libraries- eg, 12.0110 or 12.02 but still no joy.
Also if I manage to get the report to fire what should the client be running eg, if they have the Crystal Reports 2008 for Business One do they also need to install the Crystal Reports Run time - cr2008fp33_clickonce.
Any help would be appreciated.
Thanks.

Hi John
Since the SDK works in 2007 it will be using the OLD DB access method.
Change the Crystal report to use an OLE DB datasource rather than the SAP Business One data source.
Regards
Rob

Mid-2010 27" iMac with i5 - process for determine why slow

I have a mid-2010 27" iMac with an i5 processor and 12 GB of memory running latest Maverick OS. I mainly use the computer for email, web browsing, light weight spreadsheets and importing/organizing/sharing photos. I understand why my computer would be slow on startup (with reloading Safari pages, updating notifications, updating email, updating iMessage, etc.) but more and more often I see the spinning ball while using the computer. I have run though the basic steps of fixing permissions, etc. and would like to understand what is limiting my computer's performance. A few other things to note...
I have 12 GB of memory (the original 2 GB x 2 and I've added 4 GB x 2). I have heard that mixing memory isn't best.
My 1 Tb hard drive is at 80% capacity. I have heard that ideally this would be lower.
How do I determine what is causing my slowness? Is there a way of finding out which programs are demanding memory and by how much? I have read that my iMac can offically support 16 GB memory and unofficially support up to 32 GB. Not sure if 12 GB is a limiting factor or not. Just looking to get another year or so from this computer without getting frustrated watching the spinning ball. Would a fresh install of Marvericks and then reloading my personal stuff improve the situation?
Thanks in advance!

See:
Mac Maintenance Quick Assist,
Mac OS X speed FAQ,
Speeding up Macs,
How to Speed up Macs,
Macintosh OS X Routine Maintenance,
Mac troubleshooting: What to do when your computer is too slow,
Essential Mac Maintenance: Get set up,
Essential Mac Maintenance: Rev up your routines,
Maintaining OS X,
Five Mac maintenance myths and
Myths of required versus not required maintenance for Mac OS X for information.

FIM 2010 R2 SP1 - Installing CA Modules

I have a customer with on a CA running on Windows Server 2008 Standard edition - when trying to install the CA modules in as part of a CM deployment I get an error saying "This software requires Microsoft Windows Enterprise or Datacenter Edition".
I have not been able to find any documentation to explain this limitation; does anyone have any explanation for this or any experience of installing on a 2008 or 2012 standard edition server?
If there is no choice but to install on an enterprise or datacentre server, can I install the CA modules onto a subordinate CA (with the root CA still running on a standard server)?
Thanks

On Fri, 28 Mar 2014 20:39:55 +0000, cjprescott wrote:
I have not been able to find any documentation to explain this limitation; does anyone have any explanation for this or any experience of installing on a 2008 or 2012 standard edition server?
If there is no choice but to install on an enterprise or datacentre server, can I install the CA modules onto a subordinate CA (with the root CA still running on a standard server)?
http://technet.microsoft.com/en-us/library/gg418594%28v=ws.10%29.aspx
Look at the Software requirements for FIM CM Infrastructure table.
As long as the subordinate CA is the one on which you want FIM CM to manage
certificates, then yes.
Paul Adare - FIM CM MVP
AAAAAA - American Association Against Acronym Abuse Anonymous.

Report or request for SCCM 2012 computers that require a reboot.

Hello all. Has anyone done any reports (queries) in SCCM 2012 to identify computers that need a reboot? A similar request (http://social.technet.microsoft.com/Forums/en-US/configmgrsum/thread/3aa49005-9437-4a47-ad39-c2ec7b60c60c/)
for SCCM 2007 to SCCM 2012 does not work.

Hi , Below is the SQL query for identify the computer name that need a reboot due to patching. -- SCCM 2012
select
top 10 *
from v_AssignmentState_Combined
join v_R_System vrs
on vrs.ResourceID=v_AssignmentState_Combined.ResourceID
where StateID='5'
BR// Praveen Sharma B.Tech (E&C), MCSE,MCTS (Exchange)

FIM 2010 R2 SP1 Reporting ETL Process for SCSM 2012 R2?

Similar Messages

Maybe you are looking for