FIM Reporting Re-Installation Issue

We have recently upgraded the entire FIM Environment from 4.1.3451.0 to 4.1.3510.0
For FIM Service, I have un-installed Reporting feature, installed the patched successfully, however when trying to re-install Reporting feature back onto the FIM Service Node it throws KB2561430 missing error. I have made sure KB2561430 and all the latest SCSM
Cumulative updates are in place on SCSM and all the FIM Service Nodes
I tried to install the Reporting feature using the work around provided by MS, tried to install it using the command line for unattended installation and have made sure the value for EXISTINGDATABASE=1 and other parameters passed in the command are correct.
The unattended installation goes through fine, however I don't see Reporting feature installed when we go through Add/Remove Programs.
Can I remove FIM Service completely from the Server and try a clean install instead.
Has anyone experienced this kind of an issue, Any advice will be highly appreciated!
Thanks,
Abhishek.

Hi,
Install update 4.1.3461.0. Refer below link, it will resolve this issue.
http://support.microsoft.com/kb/2870703
Enayathulla.S
Why do you propose earlier patch once they patched it with more current version?
Abhishek,
You have uninstalled reporting and, during command line patching, you have re-used the same database. The same, so
without reporting. So behaviour is OK. You should use command line with EXISTINGDATABASE=1 but with SERVICE_MANAGER_SERVER=SCSMSERVER also.
If you found my post helpful, please give it a Helpful vote. If it answered your question, remember to mark it as an Answer.

Similar Messages

FIM Reporting Services Installation Failed

Hi,
I am trying to install FIM Reporting Service in our environment. I have followed the technet guide for doing so.
But my installation is encountering problems and it fails and rolls back.
After some troubleshooting , i found that the installation fails because of intermittent connection between scsm console in FIM Service server and SCSM server.
Whenever the installation fails , the connection also fails between scsm console in FIM Service server and SCSM server and i am also not able to telnet port 5724 at that time.
But after some secs again the connection happens successfully and i am able to telnet.I have checked with network team in this regard.they have confirmed no issues in the network.
Please could anybody suggest any thing on this regard.Any help will be greatly appreciated.
shakti

Hi There,
Also the Account name and password have to be entered below for mappings:
Data Warehouse Action Account - is for the Data writer account.
Data Warehouse Report Deployment Account - is for the Data reader account
The one which is blacked out in the screenshot will be the main SCOM Action account.
So re enter the passwords carefully and accordingly and check and let me know.
Gautam.75801

Oracle 10g discoverer and report services installation issue

Hi
Could some one help me in finding the solution for the problem while installing oracle 10g discoverer and report services installation ..
at configuration assistants the opmn configuration failed..
could some one suggest the possible solution for this problem.
thanks

at configuration assistants the opmn configuration failed..additional clues may exist within log file.
Edited by: sb92075 on Aug 29, 2010 7:19 PM

Crystal Reports Software Installation Issue

When I try to install Crystal reports on my Dell Optiplex 780 running Win XP SP3, 3.5 GB ram, with Adobe 9 installed and License accepted I get Error 1713 unable to intall one of it's required products. What do I need to do to complete the installation?
Ron

Error 713 is a generic Microsoft install error. E.g.; google the error, see if any of the suggestions apply. Also, use the search string 'Error 1713 crystal' in the search box at the top right corner of this web page. See if any of the results there help. E.g.;
Crystal Reports XI -- Error 1713. Crystal Reports XI cannot install one of
- Ludek
Senior Support Engineer AGS Product Support, Global Support Center Canada
Follow us on Twitter

Crystal Reports 2011 Installation Issue, key code not valid

Folks,
We have just purchased two licenses for the Crystal 2011 upgrade from DigitalRiver. The installation completes successfully, using one of the two "digital rights" keys that were provided in the confirmation email from DigitalRiver.
Upon launching Crystal Reports 2011 for the first time, though, we are being prompted with a License Manager window asking to add a key code for Crystal Reports. We enter the "digital rights" key provided by DigitalRiver, the same one used during the installation [copy and pasted from the email for accuracy] and receive the error message "The key code you just typed is not valid, please try again."
Canceling this window or clicking Ok simply closes the Crystal Reports application.
Any assistance in how to get the application running would be helpful.
Tested Environments:
Windows 7 Professional SP1, 32bit
Visual Studio 2010 w/ CR for Visual Studio 2010 installed
Windows Server 2008 R2, 64bit
Thanks,
Jeff

Follow-up:
We went through several iterations of installation and finally decided to mix things up to see if we could get a different response from the software. The items that we performed differently were as follows:
1. Ran the setup.exe as administrator [even though we have full admin access as the logged in user]
2. Hand typed the digital rights key rather than cut/paste from the email
3. Performed a custom installation rather than the default and de-selected all of the SAP and other software integration options.
The software ran fine without prompting with the License Manager.
My guess is that it was the removal of the integration pieces that allowed the application to run. We'll perform our next install with just that change and see if it is the culprit.
Jeff

Reporting server installation issue

Hello,
I have a problem while installing SCOM 2012 R2 Reporting server. My configuration is as follows:
1) 3 servers - 1 database server on SQL 2012 Standard SP2 + 2 SCOM 2012 R2 Management servers
2) all servers on Windows 2012 R2 Standard
3) Windows Firewall is disabled on all servers
4) DB server + Reporting server is installed on SQL server
5) I am able to access SQL Reporting server URLs
6) Account I am using to install is local admin on SQL and SCOM management server and has public and sysadmin role in SQL
During the installation I got error messages below. Any idea?
[17:05:40]: Error: :ModifySRSServiceAccount failed.: Threw Exception.Type: System.Runtime.InteropServices.COMException, Exception Error Code: 0x800706BE, Exception.Message:
[17:05:40]: Error: :StackTrace:   at System.Runtime.InteropServices.Marshal.ThrowExceptionForHRInternal(Int32 errorCode, IntPtr errorInfo)
   at System.Management.ManagementObject.InvokeMethod(String methodName, ManagementBaseObject inParameters, InvokeMethodOptions options)
   at Microsoft.EnterpriseManagement.OperationsManager.Setup.ReportingConfigurationHelper.ReportingConfiguration.ModifySRSServiceAccount(String userName, String userPassword, String sqlSRSServer, String srsServiceName, String sqlServerForSRSDatabase,
String srsDBName)
[17:05:40]: Warn: :Message:SetSRSSecurity Exception Exception: . Will retry..
[17:05:40]: Debug: :Now Sleeping for : 60000 milliseconds
[17:06:40]: Debug: :More: 4 rety to go..

Hi,
Did you install SCOM reporting on the SQL server which has SQL Reporting service running?
Have you followed the link below:
http://www.rickygao.com/step-by-step-installing-system-center-2012-r2-operation-manager/
In which step you got this error. How about changing another admin account to install the reporting server?
Regards,
Yan Li
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

Financial Reporting studion installation issue

Hi,
I am not able to see the financial reporting studio tab after the installation of Hyperion suit.
We have configured financial reporting as well still we cannot able to see and open financial reporting.
I have tried to open studio from worksapce, but explore button is not visible. My ID is having admin rights.
Please suggest, how can I open financial reporting?
Thanks
Sri

Getting below error message at the time of installing FR studio from workspace. Error 401--Unauthorized From RFC 2068 Hypertext Transfer Protocol -- HTTP/1.1: 10.4.2 401 Unauthorized The request requires user authentication. The response MUST include a WWW-Authenticate header field (section 14.46) containing a challenge applicable to the requested resource. The client MAY repeat the request with a suitable Authorization header field (section 14.8). If the request already included Authorization credentials, then the 401 response indicates that authorization has been refused for those credentials. If the 401 response contains the same challenge as the prior response, and the user agent has already attempted authentication at least once, then the user SHOULD be presented the entity that was given in the response, since that entity MAY include relevant diagnostic information. HTTP access authentication is explained in section 11. Thanks Sri

Reporting point installation issues

OK I have inherited a SCCM SCOM environment and all DBs including WSUS are installed in the same instance. Yuck. I made a fuss to the DB Admins and they said Oh Its fine, you just need to install seperate SSRS instances and it will work, look
see here is an article stating so.
So I have installed seperate SSRS instances and am trying to get the reporting point to install with no luck. Anyone have the steps involved in getting this working? When I go to add the reporting point no SQL instance is showing up to select
from. Please help. Thanks kindly.

Hi,
This problem might be related to firewall. You could have a look on the following thread.
http://social.technet.microsoft.com/Forums/en-US/4479e73e-8a19-4c7e-9418-b36770656b9b/sccm-2012-reporting-point-server-instance-blank
Best Regards,
Joyce
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

FIM reporting -- Run FIMPostInstallScirptsForDatawarehouse.ps1 script

We have 3 servers and
1. Server 1 -- FIM Service
2. Server 2 -- Service Manager server + Sql Server 2008 r2 with (ServiceManager DB on instance 1 +DWStagingAndConfig, DWRepository, and DWDataMart DB on instance 2)
3. Server 3 -- Data warehouse server
We have installed FIM reporting and MPSyncJob is successfully over. Next step is to run FIMPostInstallScirptsForDatawarehouse.ps1 on Data warehouse server but The FIM Reporting post installation scripts required to execute
.\FIMPostInstallScriptsForDataWarehouse.ps1
scripts in the Data Warehouse server. However, this script requires access to the "SQLCmd" tools and the "SMCmdletSnapIn" snapins. These two components are both present
when the SQL server resides in the Data Warehouse server. In this scenario that condition is not true. In this procedure, we will run the FIM post installation powershell script in the SQL server. We will create a PSSessionConfiguration in the Data Warehouse
server that will get called from the remote SQL server to execute the "SMCmdletSnapIn".
To run the script i was following the steps on this link social.technet.microsoft.com/wiki/contents/articles/17916.troubleshooting-fim-install-fim-data-warehouse-support-scripts-on-a-remote-sql-server.aspx
But in creating PSSession i am getting Access Denied error .
So is it possible, if i will install SQL server management studio on Data Warehouse server as i will get SQLCmdlets of powershell in Data Warehouse server so i can run the script directly on Data warehouse server without creating PSSession
Will it work ??

You can download just the needed pieces from
http://www.microsoft.com/en-us/download/details.aspx?id=16978.
Thanks, Brian
I think Brian wanted to paste the link without dot at the end ;)
http://www.microsoft.com/en-us/download/details.aspx?id=16978
If you found my post helpful, please give it a Helpful vote. If it answered your question, remember to mark it as an Answer.

FIM Reporting and SCSM Database Query Issue

Hello,
We have been having issues with FIM Reporting, the ETL Process for some reason seems to be failing, we further drilled down and found that there was a SQL Query running on the SCSM database Server for a very long time.
"CREATE PROCEDURE dbo.[p_GroomManagedEntity] ( @TargetId uniqueidentifier, @RetentionPeriodInMinutes int, @GroomingCriteria nvarchar(max), @BatchSize int )
AS BEGIN DECLARE @LastErr int; DECLARE @RowCount int = 1; DECLARE @TotalRowCount int = 0; DECLARE @RetentionDateTime DATETIME; DECLARE @SelectEntitiesToBeGroomedStmt
nvarchar(max); DECLARE @CoreDeleteTypedEntitiesTable TypedManagedEntityType; DECLARE @TimeGenerated DATETIME = getutcdate(); DECLARE @Command nvarchar(MAX) DECLARE @GroomHistoryId
bigint DECLARE @Comment nvarchar(max); SET @Command = N'Exec dbo.p_GroomManagedEntity ' + CAST(@TargetId AS nvarchar(40)) + ', ' + CAST(@RetentionPeriodInMinutes AS nvarchar(10)) +
', ' + CAST(@GroomingCriteria AS nvarchar(100)) + ', ' + CAST(@BatchSize AS nvarchar(10)) -- Call the grooming history insert sproc EXEC @LastErr = dbo.p_InternalJobHistoryInsert @Command,
@GroomHistoryId OUT IF @LastErr <> 0 GOTO Err; CREATE TABLE #BaseManagedEntitiesToDelete ( BaseManagedEntityId uniqueidentifier
); -- Figure out the retention datetime SELECT @RetentionDateTime = DATEADD(mi, -@RetentionPeriodInMinutes, getutcdate()) -- Execute the grooming filter statement,
hence populate the table variable, with "BatchSize" many entities. WHILE (@RowCount > 0) BEGIN INSERT #BaseManagedEntitiesToDelete EXEC sp_executesql @GroomingCriteria,
N'@Retention DATETIME,@TargetTypeId uniqueidentifier,@NumOfEntities INT', @Retention = @RetentionDateTime, @TargetTypeId = @TargetId, @NumOfEntities = @BatchSize;
SELECT @LastErr = @@ERROR, @RowCount = @@ROWCOUNT; IF @LastErr <> 0 GOTO Err; IF (@RowCount >
0) BEGIN -- Convert the BMEIds to TMEIds. INSERT @CoreDeleteTypedEntitiesTable SELECT
TME.TypedManagedEntityId FROM #BaseManagedEntitiesToDelete D JOIN dbo.TypedManagedEntity TME ON D.BaseManagedEntityId
= TME.BaseManagedEntityId WHERE TME.IsDeleted = 0; SELECT @LastErr = @@ERROR;
IF @LastErr <> 0 GOTO Err; --
Use existing DDP code to delete the instances captured in the temp table. EXEC @LastErr = dbo.p_DDPWrapperForGroomManagedEntity @TimeGenerated, @CoreDeleteTypedEntitiesTable;
IF @LastErr <> 0 GOTO Err; TRUNCATE TABLE #BaseManagedEntitiesToDelete;
SELECT @LastErr = @@ERROR; IF @LastErr <> 0 GOTO Err; END
SET @TotalRowCount = @TotalRowCount + @RowCount; END -- Call the grooming history insert sproc to update status to success
SET @Comment = N'BaseManagedEntity: ' + CAST(@TotalRowCount AS nvarchar(10)) EXEC @LastErr = dbo.p_InternalJobHistoryUpdate @GroomHistoryId, 1, @Comment IF @LastErr <> 0
GOTO Err; RETURN 0 Err: -- Call the grooming history insert sproc to update status to failure. SET @Comment = N'BaseManagedEntity: ' + CAST(@TotalRowCount
AS nvarchar(10)) EXEC @LastErr = dbo.p_InternalJobHistoryUpdate @GroomHistoryId, 2, @Comment IF @LastErr <> 0 GOTO Err; RETURN 1 END"
Can somebody advise on what this query is really about and what is its fuction, we are thinking of killing this query since it has been running for a very long time, will that hamper or cause the database to corrupt.
Rgds,
Abhishek.

Vijay,
Thanks for you reply.
I figure out a related bug:
Bug 12859472: Cannot browse store procedure in case-sensitive MS SQL Database
There are two possible workarounds:
1. Use a database name with capital letters
2. Do not use stored procedures, but access the tables directly.
The notes on the Bug ticket describes that the issue would be scheduled to be fixed in PS7 which is 11.1.1.8.
Cheers!
Leandro.

Error Installing FIM Reporting in FIM 2010 R2 with SP1 - SCSM 2012 [CheckFIMWebSiteorSolutionPackExisting]

I am running into the below issue. I am installing FIM 2010 R2 SP1 Reporting with SCSM 2012 [SCSM successfully installed].
FIM R2 Reporting installation is failing with both Wizard and Command line.
Command line captures below error: Can some one help on this?
Calling custom action Microsoft.IdentityManagement.SharePointCustomActions!Microsoft.IdentityManagement.ManagedCustomActions.SharepointCustomActions.DoesWebsiteOrSolutionPackExist
Property name = 'SHAREPOINT_URL', value = 'http://myurl.
Property name = 'UILevel', value = '2'.
CustomAction CheckFIMWebSiteorSolutionPackExisting returned actual error code 1603 (note this may not be 100% accurate if translation happened inside sandbox)
Action ended 0:27:20: CheckFIMWebSiteorSolutionPackExisting. Return value 3.
Action ended 0:27:20: INSTALL. Return value 3.
In below link, the above question is unanswered. Kindly help.
http://social.technet.microsoft.com/Forums/systemcenter/en-US/37b1af85-aef0-422b-9417-7364d51d0df4/installing-fim-reporting-in-fim-2010-r2-with-sp1?forum=systemcenterservicemanager

Hi All,
Though we use SCSM 2012, the FIM 2010 Reporting (R2 SP1) installation throws the alert to run
KB2561430 hotfix (when run throght console) and above error (when run through commnad line).This is actually a bug and MS have fixed that in one of its FIM hotfix rollup. I could move out of the above error by applying the FIM hotfix mentioned
in the below link.
http://blogs.technet.com/b/steady/archive/2013/06/12/fim-2010-r2-sp1-reporting-failure-scsm-2012-sp1-you-must-apply-patch.aspx
Aswathy Raj

FIM Reporting Resume-FIMReportingInitialSync too slow

I installed FIM Reporting services , and followed the document step by step.
I started the "Start-FIMReportingInitialSync" script , it ran for some time and stopped due to an error.The error reads
"The client has been disconnected from the server.Please call ManagementGroup.Reconnect() to reestablish the connection."
This issue as i understand might have occured due to a connectivity issue.
Hence i used the "Resume-FIMReportingInitialSync" to start the initial synce.but this script is too slow and even slower than the "Start-FIMReportingInitialSync".
Can anybody suggest how to speed up the Initial sync process.
Also, if anybody can tell me where are the data stored moved by the script "Start-FIMReportingInitialSync"
Regards
shakti

Any Update on the above issue.
shakti

FIM Reporting Services Port requirements

Hi ,
Can anybody let me know what are the communication ports required for deploying fim reporting services.
I am unable to complete the installation.any help would be greatly appreciated.
Regards
Dushyant singh

When using SCSM 2012 (SP1) you also have to install the analytic services on the instances. I can't remember exactly if it was on the DW or MS, but it would tell you during the installation of it.
And make sure your FIM version is at leat 4.1.3451, I went through a lot of pain with version 4.1.3419 en the
KB256143 error.
Find me on linkedin: http://nl.linkedin.com/in/tranet

Installing FIM Reporting in FIM 2010 R2 with SP1

I tried to install the Reporting component. I have FIM 2010 R2 with SP1 and SCSM 2012. I get a error saying I have to install the KB2561430. This is apparently a hotfix for SCSM 2010 SP1. I thought that FIM R2 with SP1 supports SCSM 2012 as written:
FIM Reporting
Support for Windows Server 2012 has been added.
Support for SQL Server 2012 has been added.
Support for SCSM 2012 has been added.
http://technet.microsoft.com/en-us/library/jj863246(v=ws.10).aspx
Is there anything I need to install in the SCSM side?
I'm stuck here

Hi,
Even I am running into the same issue. And installing FIM 2010 R2 SP1 Reporting [SCSM 2012 successfully installed].
Both Wizard and Command line failing.
Command line captures below error: Did any one solved this issues? Kindly help
Calling custom action Microsoft.IdentityManagement.SharePointCustomActions!Microsoft.IdentityManagement.ManagedCustomActions.SharepointCustomActions.DoesWebsiteOrSolutionPackExist
Property name = 'SHAREPOINT_URL', value = 'http://myurl.
Property name = 'UILevel', value = '2'.
CustomAction CheckFIMWebSiteorSolutionPackExisting returned actual error code 1603 (note this may not be 100% accurate if translation happened inside sandbox)
Action ended 0:27:20: CheckFIMWebSiteorSolutionPackExisting. Return value 3.
Action ended 0:27:20: INSTALL. Return value 3.
Aswathy Raj

Installing FIM reporting...

Hi all
We currently have a working single-server installation of FIM (FIMService, FIMSyncService, FIMPortal) and I'm looking ways to expand the installation with reporting features, with SCSM 2012. I was thinking about going with the 2 server configuration.
What should I install on the box I already have, SCSM Management console correct? Does it need a SQL instance?
And I build another server which also has SQL and I'll instal SCSMDW there?
What service accounts does SCSM and FIM reporting features need?
Thanks all!

You are looking of ways to expand the installation? Is this to meet any particular requirement? Are you looking for high availability?
For Reporting Services and SCSM there is a fairly large database footprint required, I have personally just implemented it for a customer into test and we decided to go with a dedicated SQL Cluster.
This would be a good place to start https://technet.microsoft.com/en-us/library/jj133853(v=ws.10).aspx
I would ensure you have the FIMService, SyncService etc DBs backed up with the encryption keys and a warm FIM server standing by if you are doing this in prod.
Ryan Betts
blog.ryanbetts.co.ik

FIM Reporting Re-Installation Issue

Similar Messages

Maybe you are looking for