Final cut pro and compressor

I have a FCP project that I have been working on for a year and have made DVD's from through compressor. Suddenly when I open compressor it states that there are no files associated with this project.
Another user suggested I trash the preferences, but am loath to do this incase it makes things worse as I'm not very clued up on some of the systems functions.
Please help
CB

If you've been on the project for more than a year, it must be legacy Final Cut Pro and not FCP X.
This is the FCP X forum - you should ask this question in the Final Cut Studio forum:
https://discussions.apple.com/community/professional_applications/final_cut_stud io
Andy

Similar Messages

  • Final Cut Pro and Compressor not working

    I know this has been asked before, but I didn't find a solution to my problem yet.
    Ever since I upgraded to Mavericks, I can't export any movies.
    I get the following message: The operation couldn’t be completed. (com.apple.Compressor.CompressorKit.ErrorDomain error -1.)
    And when I send the movie to compressor, I get the video rendering error: 60.
    I'm at a loss and would really apprecciate your help.
    Thanks

    It's probably the flux capacitor ... just give it a gentle but firm tap about 2 inches below the indent (just behid the mounting bracket) ... don't leave the tap on when you go out though or you will flood the bathroom.
    Hope it helps
    Andy

  • Urgent! Help, how to deal with m2ts file in Final Cut Pro or Compressor...

    Dear All:
    Please help me solve this urgent issue, I've got source that came with the mpeg-2 Transport Stream (48min content @ 3.42GB size) format , but both my Final Cut 6.0.6 and Compressor 3.0.5 can not open this type of file, is there any way that I can transcode this m2-ts file into a Final Cut Pro and Compressor readable format with the highest quality possible? And how to do it?
    Thanks in advance.
    Kevin
    Message was edited by: Kev C

    hey, Thanks David, actually, I used MPEG Streamclip prior to post this massage, the problem is that my
    MPEG Streamclip 1.9.2 can't correctly open this m2ts file (it says it can not read the file size...) and I also tried using VLC to transcode it, but with no luck, I can not find the right video and audio format to come out with QT playalbe file. Let me try ClipWarp to see if it works.
    Kevin

  • Does CC 2014 eliminate the need to have Final Cut Pro and/or Compressor installed to access Apple ProRes 422?

    Hello:
    Just today, I was working on a Mac system that does not have any of the applications that I would have expected to need to have installed in order to do more than just decompress movie files compressed with Apple ProRes 422.
    I was expecting to have to install Final Cut Studio 3, Final Cut Pro X, Compressor 4, and/or QuickTime 7 with the QuickTime Pro key; however, none of those applications are installed and I am able to create custom QuickTime Apple Pro Res422 Sequences in Premiere Pro as well as export using Apple ProRes 422.  After Effects and Adobe Media Encoder also show all the Apple ProRes variations.
    Does CC 2014 eliminate the need to have Final Cut Pro and/or Compressor installed to access Apple ProRes 422?  Is it something happening on the OS or QuickTime level that would affect CC or CS6 in the same way?
    I've done a web search, but haven't really come up with anything other than older articles about needing to have FCP installed (and I typically work on systems with Final Cut Studio 3 installed as well as CS6, CC, or CC 2014).  If more detailed information is available, it would be great to be able to read up on it.
    The system is a 21.5-inch iMac running Mac OS X 10.8.5, QuickTime Player 10.2, and Adobe Premiere Pro CC 2014 (8.0.0 - I know an update is available for PrPro, but it's not my system to make that change).
    Thanks in advance,
    Warren Heaton

    Hi Emil:
    I use ProRes all the time as well, but I have Final Cut Studio on my workstations.
    I had not come across MindPower009's YouTube video.  That explains how ProRes could be showing up without FCP or Compressor.
    So, the answer to my question would be, "No, CC 2014 does not eliminate the need to have Final Cut Pro and/or Compressor installed to access Apple ProRes 422; however, if you are willing to be in violation Apple's terms of use, you can install the ProRes codecs anyway."
    Even though MindPower009's YouTube video comments claim "FREE and LEGAL", it's clear from both the Apple download page and the ProRes codecs installer that Apple expects you to own at least one of their applications.
    Thanks again for the link!
    -Warren

  • When sending job from Final Cut Pro to Compressor using local QCluster

    When sending job from Final Cut Pro to Compressor by way of Share and using the local QCluster, the audio renders, but the video errors out saying something along the lines of Can not locate file.
    If I use 'This Computer' it works fine.
    What gives?
    Fresh install of OS and FCS.
    Thanks!

    I'm just learning the intricacies of Compressor and Qmaster myself, but I have learned that when you use Qmaster you can not share directly from FCP. You must export a Quicktime movie (reference movie seems to be fine) and input that to Compressor. This is only an issue when using Qmaster, as you've seen.

  • Final cut pro to compressor

    Hi, I am having trouble exporting a sequence from Final Cut Pro to compressor. When I export, FCP creates a new bizzarely named project, and generates an alert that "A file of that name already exists". Compressor then opens and appears normal, except that the preview window isn't able to show anything because "Final Cut Pro is busy". I then submit the batch and it promptly fails because of an error generated by FCP. What is going on? Someone help.

    Try this: Select your sequence in the FCP browser; then choose File/Export Using Compressor. Compressor will open, choose your settings and destination, and hit submit. Batch Monitor will then open, and you can monitor your progress.
    It sounds like Compressor doesn't know which file you are trying to have it export.

  • Failed to send my project in final cut pro to compressor

    I tried to send my project in final cut pro to compressor but when I go to file then see send to compressor it will not let me click on "send to compressor". I checked but none of my files are missing or anything and the project is only 4 minutes long. This has happened to me once before and it completely crashed my computer. I had to start out fresh which was a horrible process. CAN SOMEBODY PLEASE HELP?! (URGENT)What might I have done wrong that this happens? In the picture below, this happens and I have no idea why that is.

    I suspect it's a FCP X issue rather than a Compressor issue.
    Will FCP export a master file? Make a short section with the range tool and find out.
    Tri reseting the zoo's preferences. Hold down the option and command keys when you launch to reset.
    Russ

  • When you "Send Movie to Final Cut Pro" and you cancel Rendering and how

    I am moving from iMovie to Final Cut Pro and have multiple movies to send to Final Cut Pro. I would like to cancel the rendering in FCP until I actuall need it.

    Uncheck Background Render:
    Al

  • I have recently downloaded final cut pro and i'm unable to access cinema tools. I understood this would be a free addition when purchasing FCPX?

    i have recently downloaded final cut pro and i'm unable to access cinema tools. I understood this would be a free addition when purchasing FCPX?

    Thanks for responding Tom. Yes I was trying to conform frame rates, I found a few threads/youtube tutorials that all used cinema tools. Now I've spent some time in FCPX I can see where you can conform.
    Appreciate your help.

  • Student Help advice! what is best iMac model for Final Cut Pro and logic pro

    Hi
    I am currently looking into getting a iMac, but is toggling to device if I need a 27inch or a 21inch(top model),which will be used for Final Cut Pro and logic
    There is a lot of money being invested iMac, and I really not want to be stu k with a computer that not going to keep up with the amount of work load in the future.
    The specs that I have on mine are..
    21inch 
    Upgrades include
    Sdd drive 512gb
    Intel core i7
    16gb of ram
    Or
    27 inch
    Upgrades
    Fusion drive or sdd 250gb
    Intel core i7
    (Possible graphic card) NVIDIA GeForce GTX 680MX 2GB GDDR5 [+ £105.60]
    (Ram is way to expensive so will buy from second party)
    Anyone who has brought a iMac for final cut or logic what would you likely buy?..Am really stuck on the hard drives between the 27inch fusion and 512gb on the 21inch
    My budget is £1900
    My fear is that the 21inch top model's graphic card may not be good enough for advance editing on Final Cut Pro In the future when I start to get more deep into editing..logic really only needs 8gb to run smoothly..buts its the final cut specs that am having problems deciding. I know iMacs are not future proof or technology lasts for that matter, but I do expect to have it run good for a number of years before I upgrade again.
    If anyone can give me some advice, or even tell me about there set up they have for media work please let me know.

    All kinds of things affect system & HD performance, I can't tell you why your 4 year old Mac is slow.  Just because your old Mac is slow doesn't mean that a new iMac will be equally slow.
    You are correct about the issue with the smaller fusion drives.  It's one of the reasons I am not high on recommending them.  Everyone thinks they want power & performance but don't understand the gap between marketing and real life performance.  The 1TB fusion drive however should give you a good combination of rapid access and sizeable storage capacity.
    I have used external FW800 / 7200rpm drives for years and have never had a problem with any of them.  I consider them very reliable but admittedly I DO NOT use consumer drives like the WD MyBook that the big-box stores sell.   For the most part I assemble my own with OWC Mercury Elite enclosures.  In the past few years I have centered on WD Caviar Black and WD Scorpio Black drives.  I also have some Seagate Barracuda 7200.xx drives.  They all perform excellently and reliably.
    Pls. refer to my earlier post for what i recommended to you.

  • TS1846 I have edited a movie in Final Cut Pro and the video has been smoot all the time. Now, when the one hour long movie is ready the video seem to paus every 5 sec (only for half a second). It does it all the way through the movies. What is wrong? Sudd

    I have edited a movie in Final Cut Pro and the video has been smooth all the time.
    Now, when the one hour long movie is ready the video seem to paus every 5 sec (only for half a second). It does it all the way through the movies.
    What is wrong? All the sudden.

    We need info, info, info!
    What version of FCP X?
    Did you render? what are the project specs? do you use many compound clips? how much ram, hard drive space, how is the hard drive connected?
    It looks like your mac can't keep up. Maybe the bottleneck is the hard drive, or something else.
    Try exporting a master file and see if the video is ok.
    Also, keep Activity Monitor open and see how much memory pressure you've got.

  • I have the current Mac Pro the entry level with the default specification and i feel some slow performance when applying after effects on my videos using final cut pro and also rendering a video takes long time ? what upgrades do you guys suggest?

    i have the current Mac Pro the entry level with the default configuration   and i feel lack of  performance when applying after effects on my videos using final cut pro and also rendering a video takes long time ? what upgrades do you guys suggest i could do on my Mac Pro ?

    256GB SSD  it shipped with will run low and one of the things to watch.
    Default memory is 12GB  also something to think about.
    D500 and FCP-X 10.1+
    http://macperformanceguide.com/index_topics.html#MacPro2013Performance
    Five models of 2013 Mac Pro running Resolve, FCPX, After Effects, Photoshop, and Aperture

  • Are there any good DVD authoring programs for Mac now that Apple has discontinued DVD Studio and iDVD? I need to make DVDs that have interactive menus and such (Final Cut X and Compressor 4's DVD option is a little cheap). Any ideas?

    Are there any good DVD authoring programs for Mac now that Apple has discontinued DVD Studio and iDVD? I need to make DVDs that have interactive menus and such (Final Cut X and Compressor 4's DVD option is a little cheap and doesn't provide any kind of professional DVD authoring). Any ideas?

    This comes up a lot these days.
    Practically speaking, there are really four options for the Mac platform: Toast (<$100),  Adobe Premier Productiom ($1,600 to buy or $50/month to rent),  find a copy of Final Cut Studio from 3rd  party (+/- $1,000 new) or a boxed edition of iLife to get iDVD ($50 - $90 on Amazon new).
    The other question everyone has is how many OS versions before iDVD or FCS breaks? No one knows, but Apple has said they're no longer supporting these legacy apps. Of course, no one is mandated to upgrade to a new OS unless they buy a new computer. So if it works on a system, stay with it as long as it makes sense.
    Good luck.
    Russ

  • Can I migrate an iMovie project to final cut pro and keep the edits intact?

    can I migrate an iMovie project to final cut pro and keep the edits intact? It may be a solution to my apparently corrupted iMovie

    The manual tells ..
    http://help.apple.com/finalcutpro/mac/10.1/?lang=en#ver41812c7c
    keep in mind: just the 'plain cuts', not the eye-candy iMovie offers, wil be transfered.
    unfortunately it says ...:
    You initiate the process from within iMovie. The project file and the media used in the project are copied to your Final Cut Pro library.
    For more information, see iMovie Help.
    so, if your iM doesn't work anymore, you can not transfer.
    plus, my personal opinion!, I would start from scratch in FCPx...
    What issues in iM do you expect FCPX to solve,...?

  • How do i engage my 8 core mac pro to use all it's cores when using final cut pro and other applications that need processing power? at the moment they seem to be idle...

    how do i engage my 8 core mac pro to use all it's cores when using final cut pro and other applications that need processing power? at the moment they seem to be idle...

    First, did you use Setup or Migration Assistant? That can happen when coming from a PowerMac or sometimes even from another (Intel) Mac.
    Second, wait for the next version of Final Cut due very soon to ship (may have to wait for the ".1" of course to clean up any early issues.
    Final Cut Pro - Wikipedia
    There are a few apps that are better.  I think you can run multiple instances of Handbrake for one.
    I've read about and wanted to try PowerDirector 9 (Windows)
    PowerDirector 9 video software
    video editing software Wiki

Maybe you are looking for