Final Cut Studio crash after OS 10.6.5 update

10.6.5 and Final Cut Studio.
Final Cut studio is not working after 10.6.5 update. Have spinning ball of death on many projects and exports from FCP crash Compressor and DVD Studio Pro (or they crash of their own accord)
Question: Reinstall FCP??
Question: is anything lost when deleting current FCS??
Do not want to roll back to previous OS. Have done too much stuff since, and it's complicated.

Question: Reinstall FCP??
As a last resort, maybe. Have you tried using Disk Utility to repair permissions?
Did you install the ProKit 6.0.1 update? There are some threads here that advise not to do so.
You can find out by opening the Software Update pane in System Preferences and looking under the Installed Updates tab.
Question: is anything lost when deleting current FCS??
The applications, accompanying media content, associated libraries etc will be removed. You will not lose project files or media that you have imported from cameras or other sources.

Similar Messages

  • Final Cut Studio Crash - Just Purchased and Installed - Crashes Immediately

    Just installed Final Cut Studio (1).
    Crashes immediately after open.
    Please help.
    I can provide report (code) if someone that can help needs to see it.
    Thanks,
    Dan

    It is Snow Leopard. Don't run SL with your version of FCP. So what this means you have to do is back up all your files, erase the hard drive, install the Leopard OS from scratch (10.5), then fully update, then install FCS, and fully update. And stay there.
    If your FCS is an older FCS, you can't run the latest OS, typically.
    Shane

  • Final Cut Studio Fail After Pro Application Update 2010-1

    Final Cut Pro crashes when loading project.
    Motion crashes when loading project.
    Compressor won't allow me to "submit" my batch from the 'name batch' stage.
    I didn't try DVD Studio or Color.
    Problems started as soon as I updated. Anyone else have similar problems? I tried dumping my system preferences but that didn't help. I haven't modified or customized FCS at all, I don't have any unusual plugins - I hardly even set up customized window configurations.
    Using latest Final Cut Studio (MB642Z/A)
    Final Cut Pro 7.0
    Compressor 3.5
    Motion 4
    Running OS X 10.6.2
    3.06 GHz Intel Core 2 Duo, 21.5" iMac
    8 GB 1067 MHz DDR3
    Thank you for any feedback. If others have similar problems, I can wait for next update (hopefully soon) otherwise I have no clue where to start.
    --Doug

    I should have known better, but new to the mac....dealt with death blows like this for a while....
    Process: Final Cut Pro [1209]
    Path: /Applications/Final Cut Studio/Final Cut Pro.app/Contents/MacOS/Final Cut Pro
    Identifier: com.apple.FinalCutPro
    Version: 7.0.1 (7.0.1)
    Build Info: FCPApp-910141802~4
    Code Type: X86 (Native)
    Parent Process: launchd [124]
    Date/Time: 2010-03-25 01:06:44.195 -0500
    OS Version: Mac OS X 10.6.2 (10C540)
    Report Version: 6
    Interval Since Last Report: 3062 sec
    Crashes Since Last Report: 9
    Per-App Interval Since Last Report: 1939 sec
    Per-App Crashes Since Last Report: 8
    Anonymous UUID: 2739307A-393B-4135-A387-644DE9430D3D
    Exception Type: EXCBADACCESS (SIGSEGV)
    Exception Codes: KERNINVALIDADDRESS at 0x00000000390302fe
    Crashed Thread: 0 Dispatch queue: com.apple.main-thread
    Thread 0 Crashed: Dispatch queue: com.apple.main-thread
    0 libSystem.B.dylib 0x90f1bb51 tinymalloc_from_freelist + 741
    1 libSystem.B.dylib 0x90f1ab03 szonemalloc_shouldclear + 297
    2 libSystem.B.dylib 0x90f1a988 malloczonemalloc + 81
    3 libSystem.B.dylib 0x90f18a58 malloc + 50
    4 libstdc++.6.dylib 0x91105617 operator new(unsigned long) + 36
    5 com.apple.motion.TextFramework 0x24c54dab TXTextObjectRender::getHelium(LiAgent&) + 667
    6 com.apple.Lithium 0x248ce715 LiAgent::getHelium(LiImageSource*) + 4789
    7 com.apple.motion.TextFramework 0x24c13829 TXTextLayout::buildHGNodeForFace(PCPtr<TXTextObject>, OZRenderParams&, LiAgent&, TXHeliumGlyph*, unsigned int, bool, PCMatrix44Tmpl<double>&, PCMatrix44Tmpl<double>&, PCMatrix44Tmpl<double>&, PCMatrix44Tmpl<double>&) + 4985
    8 com.apple.motion.TextFramework 0x24c455ec TXCachedGlyphRender::getHelium(LiAgent&) + 940
    9 com.apple.Lithium 0x248ce715 LiAgent::getHelium(LiImageSource*) + 4789
    10 com.apple.Lithium 0x248c4cda LiImageSoftClip::getHelium(LiAgent&) + 74
    11 com.apple.Lithium 0x248ce715 LiAgent::getHelium(LiImageSource*) + 4789
    12 com.apple.Lithium 0x248c4cda LiImageSoftClip::getHelium(LiAgent&) + 74
    13 com.apple.Lithium 0x248ce715 LiAgent::getHelium(LiImageSource*) + 4789
    14 com.apple.Lithium 0x248e0692 LiPolygonInstance::makeNode(LiClipSet const&) + 1682
    15 com.apple.Lithium 0x24911111 LiRenderInstance::collectGeode(LiGeode*, LiCollectState&) + 929
    16 com.apple.Lithium 0x24911f01 LiRenderInstance::collect3D(LiSceneObject*, LiCollectState&) + 1521
    17 com.apple.Lithium 0x249136a5 LiRenderInstance::collect3D(LiSceneObject*, LiCollectState&) + 7573
    18 com.apple.Lithium 0x249136a5 LiRenderInstance::collect3D(LiSceneObject*, LiCollectState&) + 7573
    19 com.apple.Lithium 0x249136a5 LiRenderInstance::collect3D(LiSceneObject*, LiCollectState&) + 7573
    20 com.apple.Lithium 0x249136a5 LiRenderInstance::collect3D(LiSceneObject*, LiCollectState&) + 7573
    21 com.apple.Lithium 0x249136a5 LiRenderInstance::collect3D(LiSceneObject*, LiCollectState&) + 7573
    22 com.apple.Lithium 0x249136a5 LiRenderInstance::collect3D(LiSceneObject*, LiCollectState&) + 7573
    23 com.apple.Lithium 0x249123a8 LiRenderInstance::collect3D(LiSceneObject*, LiCollectState&) + 2712
    24 com.apple.Lithium 0x249123a8 LiRenderInstance::collect3D(LiSceneObject*, LiCollectState&) + 2712
    25 com.apple.Lithium 0x249123a8 LiRenderInstance::collect3D(LiSceneObject*, LiCollectState&) + 2712
    26 com.apple.Lithium 0x249144b5 LiRenderInstance::collectPolygons(LiSceneObject*, LiPtrArray<LiPolygonInstance>&) + 1509
    27 com.apple.Lithium 0x24914d35 LiRenderInstance::collect() + 949
    28 com.apple.Lithium 0x24914f91 LiRenderInstance::buildHeliumGraph(LiAgent&) + 529
    29 com.apple.Lithium 0x24915a3e LiRenderInstance::getHelium(LiAgent&) + 270
    30 com.apple.Lithium 0x2486bac3 LiRenderer::getHelium(LiAgent&) + 51
    31 com.apple.Lithium 0x248ce715 LiAgent::getHelium(LiImageSource*) + 4789
    32 com.apple.ozone.framework 0x238c4ebe GLRenderer::getSceneHeNodeFromLiWorld(OZScene*, OZSceneSettings const&, OZRenderParams&, PCPtr<LiGroup>, HGRenderer*, int, int, double, double, long*) + 2254
    33 com.apple.ozone.framework 0x238c96e0 GLRenderer::getFrameNodeForSingleTime(OZScene*, OZRenderParams&, HGRenderer*, double, double, long*) + 880
    34 com.apple.ozone.framework 0x238ca2ae GLRenderer::getFrameNodeIncludingFields(OZScene*, OZRenderParams&, HGRenderer*, long*) + 990
    35 com.apple.ozone.framework 0x238ca894 GLRenderer::getFrameNode(OZScene*, OZRenderParams&, HGRenderer*, long*) + 164
    36 com.apple.ozone.framework 0x238ce817 GLRenderer::render(OZScene*, OZRenderParams&) + 2583
    37 com.apple.ozone.framework 0x2396fdd3 OZXGetFrame + 2755
    38 com.apple.ozone.framework 0x23972406 OZXGetFrameAsTexture + 86
    39 ...uartzComposer.QCMotionPatch 0x0d949c96 UserHasCancelled + 17982
    40 ...uartzComposer.QCMotionPatch 0x0d9467ca UserHasCancelled + 4466
    41 ...uartzComposer.QCMotionPatch 0x0d946428 UserHasCancelled + 3536
    42 com.apple.QuartzComposer 0x91730396 -[QCPatch(Private) _renderAtTime:arguments:] + 111
    43 com.apple.QuartzComposer 0x91739334 -[QCContext renderPatch:time:arguments:] + 809
    44 com.apple.QuartzComposer 0x91738f9c -[QCGraphicsContext renderPatch:time:arguments:] + 96
    45 com.apple.QuartzComposer 0x91737f53 -[QCOpenGLContext renderPatch:time:arguments:] + 565
    46 com.apple.QuartzComposer 0x91737d16 -[QCPatch(Runtime) render:arguments:] + 92
    47 com.apple.FinalCutPro 0x005196e9 RenderQCPatch + 1671
    48 com.apple.FinalCutPro 0x00515c63 FCPQCMainEntry(long, long, KGDictInt*, void*) + 10083
    49 com.apple.FinalCutPro 0x002ea236 pKGRunTransition(KGDictInt*) + 2182
    50 com.apple.FinalCutPro 0x0045b5dc EffectRender(XXGlobals*, EffectTree*, long, long, Output*) + 5894
    51 com.apple.FinalCutPro 0x0045e909 RenderFXTreeNode(XXGlobals*, EffectTree*, long, unsigned char, KGQTCanvasFormat, long, Output*) + 1497
    52 com.apple.FinalCutPro 0x004614fb DecodeEffectFrameN(XXGlobals*, EffectTree*, long, unsigned char, Output*, bool*) + 2933
    53 com.apple.FinalCutPro 0x004609ff DecodeEffectFrameN(XXGlobals*, EffectTree*, long, unsigned char, Output*, bool*) + 121
    54 com.apple.FinalCutPro 0x004609ff DecodeEffectFrameN(XXGlobals*, EffectTree*, long, unsigned char, Output*, bool*) + 121
    55 com.apple.FinalCutPro 0x00461893 DecodePipeTree(XXGlobals*, Output*) + 633
    56 com.apple.FinalCutPro 0x0042bb15 FCPMediaHandler::RenderFrames(long long, bool) + 3981
    57 com.apple.FinalCutPro 0x0042c17b FCPMediaHandler::Idle(long, long, long*, TimeRecord*) + 657
    58 com.apple.FinalCutPro 0x0042d245 FCPMHIdle(FCPMediaHandler*, long, long, long*, TimeRecord*) + 45
    59 ...ple.CoreServices.CarbonCore 0x92def72d callComponentStorage_44444 + 49
    60 ...ple.CoreServices.CarbonCore 0x92de4474 CallComponentFunctionCommonWithStorage(char**, ComponentParameters*, long (*)(), unsigned long) + 54
    61 com.apple.FinalCutPro 0x00426009 FCPMHDispatch(ComponentParameters*, char**) + 59
    62 ...ple.CoreServices.CarbonCore 0x92ddcb06 CallComponentDispatch + 29
    63 ...ickTimeComponents.component 0x95ee4de7 MediaIdle + 61
    64 ...ickTimeComponents.component 0x957673b6 doGenericIdle + 2991
    65 ...ickTimeComponents.component 0x957691eb GenericMoviesTask + 357
    66 ...ple.CoreServices.CarbonCore 0x92def72d callComponentStorage_44444 + 49
    67 ...ple.CoreServices.CarbonCore 0x92de4474 CallComponentFunctionCommonWithStorage(char**, ComponentParameters*, long (*)(), unsigned long) + 54
    68 ...ickTimeComponents.component 0x9576893e GenericComponentDispatch + 182
    69 com.apple.FinalCutPro 0x00426025 FCPMHDispatch(ComponentParameters*, char**) + 87
    70 ...ple.CoreServices.CarbonCore 0x92ddcb06 CallComponentDispatch + 29
    71 com.apple.QuickTime 0x912b4083 MediaMoviesTask + 61
    72 com.apple.QuickTime 0x912b2e33 TaskMovie_priv + 4783
    73 com.apple.QuickTime 0x912c5b68 MoviesTask_priv + 101
    74 com.apple.FinalCutPro 0x001bad50 DoMoviesTask(KGPlayerRec*) + 2388
    75 com.apple.FinalCutPro 0x001cda79 DisplayMovie(KGPlayerRec*) + 2201
    76 com.apple.FinalCutPro 0x001d1f70 pKGPlayerUpdate(KGPlayerRec*) + 196
    77 com.apple.FinalCutPro 0x001bb045 DelayTimer(long, long, KGDictInt*, void*) + 89
    78 com.apple.FinalCutPro 0x00150552 KGTimerInvoke(__EventLoopTimer*, void*) + 212
    79 com.apple.CoreFoundation 0x900c1edb __CFRunLoopRun + 8059
    80 com.apple.CoreFoundation 0x900bf864 CFRunLoopRunSpecific + 452
    81 com.apple.CoreFoundation 0x900bf691 CFRunLoopRunInMode + 97
    82 com.apple.HIToolbox 0x97feff0c RunCurrentEventLoopInMode + 392
    83 com.apple.HIToolbox 0x97fefcc3 ReceiveNextEventCommon + 354
    84 com.apple.HIToolbox 0x98177c02 _AcquireNextEvent + 54
    85 com.apple.HIToolbox 0x9816dd5b _RunAppModalLoop + 101
    86 com.apple.HIToolbox 0x9816e13b RunAppModalLoopForWindow + 86
    87 com.apple.FinalCutPro 0x002a86b3 pKGDialogRun(KGPanelRecord*, unsigned char, unsigned char, KGDictInt*) + 755
    88 com.apple.FinalCutPro 0x00285bf4 pKGNotifyFilesOffline(KGDictInt*, long) + 1990
    89 ...FinalCutPro.Plugins.Browser 0x0bd0c914 BrowserOpenFile(KGFileRec*, unsigned char, unsigned char, KGDictInt**) + 5718
    90 ...FinalCutPro.Plugins.Browser 0x0bd0f42d Browser(long, long, KGDictInt*, KGFileRec*) + 10299
    91 com.apple.FinalCutPro 0x0018c870 CheckForOpenFile(KGFileSpec*, char*, unsigned char, unsigned char, KGDictInt**) + 488

  • Final cut studio disappeared after loading Final cut pro X

    After I loaded FCPX my FCS disappered n my computer wont let me reload.....what happend to Final cut studio n how can i reload it?

    Did you launch from the dock? If so check your Applications folder. If you installed correctly FCP 6/7 should now be in a folder inside the Applications folder

  • Final Cut Studio crashing upon opening whenever external drives are active

    Hello folks,
    I've gotten some great advice on this forum for a while now, through reading other posts. But now I'm hoping I can get some directly tailored advice, as I'm floundering a bit. Thanks in advance for your time, as I've tried to be as thorough as possible in my description of the problems and as-yet failed attempts at solutions.
    The project is a full length documentary, and I'm having repeated, regular problems with Final Cut 6.0.5 crashing when I try to open the application.
    Now, here are some of the details. FCP will open just fine, if the external hard drives that contain all the media for the project are NOT turned on. However, if the drives are turned on, Final Cut will begin to open, the white box with the application name, registration information, and whatnot will begin, and it will freeze up, hanging there until I force quit. When I force quit, and look at the report, the only information I can get out of it is that the cause is "hanging", though as I'm no expert on reading crash reports, I'm sure I'm missing a lot.
    Once I force quit, FCP will not entirely quit. It remains "open", in that I can't open the application again, and my FCP icon in the dock has the little white dot next to it (I'm OS 10.5.6). However, if I eject the drives (which I am sometimes allowed to do, other times I'm told that the drives are still in use by an application), then FCP does resolve its force-quit, and is entirely quit. I can reopen it again immediately afterward with no problem, assuming I haven't turned the drives back on. If I'm not able to eject the drives, then I have to restart.
    My workaround so far has been to open FCP without the drives being active, turn on the drives, and then open the project file I want. This works, but seems to be evidence of some serious problems. If I'm opening FCP, and I have the user preference of "open last project upon launch" switched off, why would the hard drives affect FCP? Is FCP trying to read the drives even though it doesn't need any media from them to open in a brand-new project file?
    Other issues that have arisen are occasional freezes while in FCP. I will have FCP open (using the workaround), playing fine, and suddenly a click somewhere in the timeline will lead to the spinning beachball. This happens most frequently if I am quickly changing clips, or if I have just brought another application to the foreground and then gone back to FCP. When this happens, and I force quit, once again FCP does not entirely quit, but has to have all the drives ejected to fully quit.
    About the drives themselves - I am using 4 GTech 1 TB drives, all of which spin up normally, though two of them are now over 2 years old.
    About the software - I reinstalled FCP, and the problems existed beforehand and afterwards. I may do it again.
    About the operating system - I archived and installed Leopard, I did not back everything up and zero the drive before installing Leopard.
    About the project files - All project files are under 75 MB, most are much smaller. Since it is a long-form piece with over 200 hours at this point, I've been creating multiple projects.
    About the render files - I've flushed them repeatedly.
    About corrupt files - I've looked through my capture bins and trashed any suspiciously small QuickTime files.
    About FCP preferences - I've used FCS Remover a couple times, and the problem reappears.
    About permissions - I've repaired permissions repeatedly, and the problem reappears.
    About the rest of the system - Compressor won't allow me to submit batches, but from what I understand that is an issue with Apple QMaster. Also, the problems with FCP were there before Compressor was not working. I just today had a problem with System Preferences crashing once it opened, but after deleting the plist for System Preferences it seems to be back up and running fine.
    Machine details:
    MacPro
    2 x 2.66 GHz Dual-Core Intel Xeon
    6 GB memory
    667 MHz processor speed
    FCP 6.0.5
    Thanks again!
    Daniel Littlewood
    Editor, Don't Think I've Forgotten <Edited by Host>

    Hi Michael,
    Thanks for your input on this. I went through several steps, including most of the ones you recommended, and came upon what seems to be the problem (knock on wood).
    My editing setup is one MacPro, 4 G-Raid drives, and one Sony DSR-11 digital video deck. After clearing up more space the G-Raid drives to bring them to about 10% free space, things seemed to be running smoother - there were less crashes within FCP. However, I was still getting crashes on opening FCP, at the same "splash screen" point (after all the AE Effects and Video Effects had loaded).
    Running Disk Utility on all drives showed no problems, and unfortunately I don't have DiskWarrior (though that may be an upcoming purchase).
    It wasn't until I went through your suggestion of starting FCP with the individual drives connected that I got somewhere. FCP would start up fine with one or even two drives connected, but not with three or four. Doing a little research on that brought me to two threads on Creative Cow about G-Raid drives and daisy-chaining:
    http://forums.creativecow.net/thread/176/856609
    http://forums.creativecow.net/thread/176/856570
    Once I put two of the drives onto the rear FireWire800 port, and two of the drives into the front FireWire800 port, with the DSR-11 still in the back FireWire 400 port, my problems disappeared. Huzzah! The G-Raid folks recommend no more than three FireWire devices connected at a time, and lightening the load on the FireWire port by uncoupling the four-drive long daisy-chain has immediately helped. Now, I'll keep an eye on it, and may potentially buy a PCI card if something goes wonky again, but I am very happy to have gotten things up and running again. Cheers!

  • Problems opening project in Final Cut Studio 2 after installing FCP X

    After installing Final Cut Pro X, a friend is having problems opening his older FCS 2 Projekts ind FCS 2.
    Projekt starts loading and around 35 % crashes.
    Ist there a prossibility to fix this ? Any experience ?
    Thanks for help.

    SO, my friend is running both FCS 7 and FCP X on the same harddrive.
    snowleopard with the latest upadates.
    hmmm
    yes, the funny thing is, I have FCS 6 and FCP X on one Disk running Snowleopard.
    NO problems. Uprade to Lion... No Problems.
    And also I could not find information on the web of somebody else having this problem.

  • Final Cut Studio Crash! Why?

    Hi,
    I am working since a few years with Final Cut Pro 5,0,4.
    Suddenly the application doesn't open anymore. The other Studio apps even don't.
    Does somebody have an idea?
    Thanks for help.
    The diagnostic message is:
    Process: Final Cut Pro [796]
    Path: /Applications/*FILM/Final Cut Pro.app/Contents/MacOS/Final Cut Pro
    Identifier: com.apple.FinalCutPro
    Version: 5.0.4 (5.0.4)
    Build Info: FCPApp-512141418~2
    Code Type: PPC (Translated)
    Parent Process: launchd [89]
    Date/Time: 2010-05-17 17:33:13.608 +0200
    OS Version: Mac OS X 10.6.3 (10D573)
    Report Version: 6
    Interval Since Last Report: 172590 sec
    Crashes Since Last Report: 4
    Per-App Crashes Since Last Report: 3
    Anonymous UUID: 946DE742-FDEF-4CCC-BDF2-4969429D905B
    Exception Type: EXC_CRASH (SIGTRAP)
    Exception Codes: 0x0000000000000000, 0x0000000000000000
    Crashed Thread: 0 Dispatch queue: com.apple.main-thread
    Thread 0 Crashed: Dispatch queue: com.apple.main-thread
    0 libSystem.B.dylib 0x8023656a _pthreadkill + 10
    1 libSystem.B.dylib 0x80235e17 pthread_kill + 95
    2 com.apple.FinalCutPro 0xb80bfb30 0xb8000000 + 785200
    3 com.apple.FinalCutPro 0xb80c0037 0xb8000000 + 786487
    4 com.apple.FinalCutPro 0xb80dd8e8 0xb8000000 + 907496
    5 com.apple.FinalCutPro 0xb8145397 spinlockwrapper + 1791
    6 com.apple.FinalCutPro 0xb801ceb7 0xb8000000 + 118455
    Thread 1:
    0 libSystem.B.dylib 0x801402fa machmsgtrap + 10
    1 libSystem.B.dylib 0x80140a67 mach_msg + 68
    2 com.apple.FinalCutPro 0xb819440f CallPPCFunctionAtAddressInt + 206231
    3 libSystem.B.dylib 0x8016da19 pthreadstart + 345
    4 libSystem.B.dylib 0x8016d89e thread_start + 34
    Thread 0 crashed with X86 Thread State (32-bit):
    eax: 0x00000000 ebx: 0x802f74e0 ecx: 0xb7fff9ac edx: 0x8023656a
    edi: 0xb8211640 esi: 0x00000005 ebp: 0xb7fff9d8 esp: 0xb7fff9ac
    ss: 0x0000001f efl: 0x00000286 eip: 0x8023656a cs: 0x00000007
    ds: 0x0000001f es: 0x0000001f fs: 0x00000000 gs: 0x00000037
    cr2: 0x80236560
    Binary Images:
    0x80000000 - 0x8005bff7 com.apple.framework.IOKit 2.0 (???) <69E4FE93-376C-565E-650F-04FAD213AA24> /System/Library/Frameworks/IOKit.framework/Versions/A/IOKit
    0x8007a000 - 0x800e4fe7 libstdc++.6.dylib 7.9.0 (compatibility 7.0.0) <411D87F4-B7E1-44EB-F201-F8B4F9227213> /usr/lib/libstdc++.6.dylib
    0x8013f000 - 0x802e4feb libSystem.B.dylib 125.0.1 (compatibility 1.0.0) <06A5336A-A6F6-4E62-F55F-4909A64631C2> /usr/lib/libSystem.B.dylib
    0x80364000 - 0x804ddffb com.apple.CoreFoundation 6.6.1 (550.19) <1E97FB1E-9E42-B8EB-E463-5C75315FDA31> /System/Library/Frameworks/CoreFoundation.framework/Versions/A/CoreFoundation
    0x805d5000 - 0x805e3fe7 libz.1.dylib 1.2.3 (compatibility 1.0.0) <82B2C254-6F8D-7BEA-4C18-038E90CAE19B> /usr/lib/libz.1.dylib
    0x805e8000 - 0x805f4ff7 libkxld.dylib ??? (???) <13F26BB6-C2F7-9D74-933E-09AD8B509ECD> /usr/lib/system/libkxld.dylib
    0x805f8000 - 0x8063eff7 libauto.dylib ??? (???) <85670A64-3B67-8162-D441-D8E0BE15CA94> /usr/lib/libauto.dylib
    0x8064b000 - 0x807cdfe7 libicucore.A.dylib 40.0.0 (compatibility 1.0.0) <96A45E03-2B29-83EB-0FC6-2C932E398722> /usr/lib/libicucore.A.dylib
    0x8082f000 - 0x808dcfe7 libobjc.A.dylib 227.0.0 (compatibility 1.0.0) <DF8E4CFA-3719-3415-0BF1-E8C5E561C3B1> /usr/lib/libobjc.A.dylib
    0x808f0000 - 0x808f3fe7 libmathCommon.A.dylib 315.0.0 (compatibility 1.0.0) <1622A54F-1A98-2CBE-B6A4-2122981A500E> /usr/lib/system/libmathCommon.A.dylib
    0x8fe00000 - 0x8fe4162b dyld 132.1 (???) <211AF0DD-42D9-79C8-BB6A-1F4BEEF4B4AB> /usr/lib/dyld
    0xb8000000 - 0xb81defff com.apple.FinalCutPro 5.0.4 (5.0.4) <C6CB6BA8-8BA2-8F0A-4A49-912B00D2FF10> /Applications/*FILM/Final Cut Pro.app/Contents/MacOS/Final Cut Pro
    0xffff0000 - 0xffff1fff libSystem.B.dylib ??? (???) <06A5336A-A6F6-4E62-F55F-4909A64631C2> /usr/lib/libSystem.B.dylib
    Translated Code Information:
    objc[796]: garbage collection is ON
    NO CRASH REPORT
    Model: iMac5,1, BootROM IM51.0090.B09, 2 processors, Intel Core 2 Duo, 2.16 GHz, 2 GB, SMC 1.9f4
    Graphics: ATI Radeon X1600, ATY,RadeonX1600, PCIe, 128 MB
    Memory Module: global_name
    AirPort: spairportwireless_card_type_airportextreme (0x14E4, 0x87), Broadcom BCM43xx 1.0 (5.10.91.27)
    Bluetooth: Version 2.3.1f4, 2 service, 19 devices, 1 incoming serial ports
    Network Service: Ingebouwd Ethernet, Ethernet, en0
    Network Service: AirPort, AirPort, en1
    Serial ATA Device: ST3250824AS Q, 232,89 GB
    Parallel ATA Device: MATSHITADVD-R UJ-85J
    USB Device: Built-in iSight, 0x05ac (Apple Inc.), 0x8501, 0xfd400000
    USB Device: Bluetooth USB Host Controller, 0x05ac (Apple Inc.), 0x8206, 0x7d100000
    USB Device: IR Receiver, 0x05ac (Apple Inc.), 0x8240, 0x7d200000
    USB Device: Hub in Apple Pro Keyboard, 0x05ac (Apple Inc.), 0x1003, 0x1d100000
    USB Device: Apple Pro Keyboard, 0x05ac (Apple Inc.), 0x020c, 0x1d130000

    Purchase Digital Rebelion's "FCS Maintenance Pack" which includes a crash analyzer.
    http://www.digitalrebellion.com/fcs_maintenance.htm
    -DH

  • Why can't I see the Final Cut Studio icon after installation?

    All the installation process went fine and it even displayed "Installation Successful!" And now I can't find it anywhere

    Go to www.digitalrebellion.com and get the fcp uninstaller and then reinstall. 
    Are you sure you've chosen the right options for the install if you're doing a custom install.
    Here's a user tip regarding installtions.  Making disk images of the installation dvd's can save an enormous amount of time.
    https://discussions.apple.com/docs/DOC-2861

  • Mac Pro and Final Cut Studio 5.1.2

    I've had problems trying to export mpeg files from final cut pro using compressor after having updated all applications to their current versions (FCP 5.1.2, Compressor 2.3, Qmaster 2.3, QT 7.1.3...) including firmware, OS and security updates. Since I was kind of in the middle of a project I ended up reverting back to the original universal crossgrade of Final Cut Studio (FCP 5.1, Compressor 2.1, Qmaster 2.1...) in order to get the desired results of a muxed mpeg. Now, before I go back to trying to resolve this issue of updating the software, I would like to know if anyone is running Final Cut Studio on a Mac Pro with all updates current (5.1.2, 2.3...) and with the ability to export muxed mpeg streams - both audio and video in the same file. Also, I have posted more specific questions regarding these issues in the compressor and FCP forums but decided I needed to hear from some Mac Pro users who have had success with the Final Cut Studio updates. BTW, I have done all the updates of Final Cut Studio (5.1.2, 2.3...) on a G5 quad at work and have had no problems whatsoever. I'd just like to have everything up to date and functional. Other than trying to get this worked out, I have found my Mac Pro to be most excellent. Thanks in advance.

    Dave, thanks for your input. It would crash out during the compressor export and the failure reason would say 3x Crash Server Down in the compressor box. I haven't tried an mpeg-1 because all we broadcast are mpeg-2 program streams. Most of the stuff I export is no longer than 10 - 12 minute segments. If you could, try exporting as an mpeg-2 muxed. Some other possible factors - I had captured the original footage on a G5 quad at work, put them on an external drive and then loaded them onto the Mac Pro and imported them into the project. Could there be a difference between DV codecs of the PPC and the Intel processors? Now that I'm at a stopping point I'm planning on trying to do the update again. Just hoping to catch something I might have missed. If I were a total computer illiterate I would say user error, but I'm not.

  • Final Cut Studio Upgrade/Crossgrade Nightmare

    Hopefully someone here can help me, because I'm facing a huge problem thanks to Apple's horrific upgrade/crossgrade nightmare with Final Cut Studio.
    After some forum surfing here, I've discovered that upgrade/crossgrades were offered some months ago, but not anymore. I think this is outrageous on the part of Apple.
    Here's my situation:
    September 2006 (Australia): Bought a spiffy G5 / 23" Cinema HD machine with Final Cut Studio (5.0). Spent over $8,000. Used and loved and used and loved.
    April 2007 (New Zealand): Bought a spiffy MacPro / 23" HD. Spent another $8,000. Can't used the software because the new machine is intel/Rosetta. Can't "crossgrade" because the offer's gone. Have to upgrade to FCS2. Cool. I will. But it's not here in NZ for a few more weeks, and I need FCP NOW!
    What do I do?
    How do I install and run my Final Cut Studio 5.0 on the new intel Mac? Where do I go to get the "crossgrade" (what a load of crap, by the way... to make customers who spent thousands on software have to pay to use it on the new machines) now that the links are all redirecting to FCS2??
    Any advice (URGENTLY) would be most appreciated. I've been on hold with Apple for 20 minutes already. Cheers.
    MacPro 2.66Ghz QX   Mac OS X (10.4.9)  

    Really? The upgrade was no secret? Maybe for people who sit online and read everything there is to know about this stuff... but I've been busy using FCP 5.0 for a year and a half on a PPC machine. How am I supposed to know that when I buy a new MacPro everything is going to come crashing to a halt? I've had better upgrade experiences with Windoze machines (and those have been pretty horrific--the appropriate and suitable word here--too)!
    And why exactly should I have to pay $700 USD for the privilege of using MY software on a newer machine? I have no problem paying the upgrade price for Final Cut Studio 2... it's a new product, better features, etc. But to pay it to use software I bought a year and a half ago on a new machine? The "crossgrade" should be FREE. Yes, I know that's a bad word in the Apple world, but if you're going to do a shift in technology, it's completely disrespectful to your customers to present them with a situation of being unable to use what they've paid dearly for. Honestly. It's one of the "benefits" Apple uses to SELL their computers -- whatever happened to It just works, and You can use all your old stuff?
    Mate, you don't have to sympathize with my position. But after spending $18,000, I think a reasonable solution to this problem is fair and warranted.
    If anyone else has any suggestions, I would very much appreciate them.

  • Problem licencing Final Cut Studio cross upgrade

    I purchased the coss upgrade from Final Cut 4.0 to Final Cut studio (FCS)
    After entering the licence code for FCS, a error message says: "The licence file will not be written to disk because the user does not have enough priveleges".
    I am logged in as Admin - I even made another account as Admin, but the same message. FCS allows you to install the software, but when finished, every program in FCS prompts for a unuqie licence key - which did not come with the package.
    What am I doing wrong?
    G5 2Ghz Dual   Mac OS X (10.4.5)  

    We've also seen where you might need to delete one or more of the ID files.
    Sorry, can't recall the exact post.
    The post was just here a few days ago. Try searching for "license".
    bogiesan

  • Questions about final cut studio 7 and motion 5

    Hello!
    I have two questions:
    1. How do I find all the updates to the final cut studio? Last came out before the final cut pro x came out.
    2. Works Motion 5 good up to final cut pro 7? Will there by any problem to use both prorammene against each other? And if so, what kind of problem can arise?
    I would be grateful if someone could tell me this because I had settings alert Motion 4 (which now crashes at startup). And considering buying Motion 5 for I will not have to be automatically installed again my whole system that works one hundred percent. The job I would rather not do.
    I'm not so good English so I hope you understand what I mean.
    Can any help me for this little crisis I have a lot of work left and wait. :-(

    This I have done to run instaleringen the entire final cut studio re-enter. Ran software product update. Have checked the final cut pro and then I have version 7 and version7.0.3 as I had before.
    Before this, I have thrown the preference files for Motion 4, but disk utility to repair permissions on the system drive, I have not used.
    But how can a fjærne entire final cut studio package also put it in again so we have aclean new installation of the programs?
    How can we explain that this has happened? Just what I do not understand.
    Are happy for all the tips I get. For I dread to put reindeer speakers the whole thing sinceit worked so well as it did before this happened.
    Thanks to all who will help me. I will be very happy if this can be solved in an easymanner without having to spend a whole day on automatically installed everythingagain.
    ke

  • Final Cut Studio 2 upgrade ruined my HD video files!

    Okay, now I'm really puzzled. I installed Final Cut Studio 2 to upgrade my PowerMac G5. Now, all the HD footage I recorded, both in iMovie HD and in FCP 5 from my Sony HDR-FX1 camera has annoying green and red streaks that flash repeatedly. Even iMovie HD has the same problem when playing back old HD projects. The streaks also appear if I try playing the files back through Quicktime Player.
    How do I know that the upgrade was the issue? As luck would have it, I still had my copy of FCP 5 installed. I opened one of the old HD projects in version 5 format in FCP 5, and the video plays back perfectly. Load the same project into FCP 6, and streaks.
    Exactly how is this an "upgrade"? How do I fix?

    Issue
    Earlier versions of the applications in Final Cut Studio might not open or may behave unexpectedly if you use them on your computer after upgrading to Final Cut Studio 2.
    When you upgrade to Final Cut Studio 2, there are a number of application-support resources that also get upgraded. Earlier versions of the applications in Final Cut Studio are not compatible with these newer support resources, and should not be used on a computer that has been upgraded to Final Cut Studio 2.
    Affected Products:
    Final Cut Pro
    Motion
    Soundtrack Pro
    Compressor
    DVD Studio Pro
    Qmaster
    Cinema Tools
    LiveType
    Solution
    Don't move or rename Final Cut Studio applications after they're installed. If you have moved or renamed applications, they may still be present on your hard drive after you upgrade to Final Cut Studio 2. You can delete the vestigial applications them by dragging them to the Trash.

  • Final Cut Studio update and FCPX

    So I've not noticed until now, but I now have a need for it. I need to update my Final Cut Studio 3 to the latest Pro App update. I have an editing gig that is requiring me to use FCP7 but I recently installed it to my new Macbook Pro and it's really unstable. I've had it crash on me way too many times.
    However, I have FCPX on my laptop as well. When I tried updating the Studio using the Pro Apps, update, it said it installed, but when I check the versions, it made no changes! So I'm wondering how I can actually update my Final Cut Studio 3 suite while I still have the FCPx and new Motion and Compressor installed on the same computer....
    Any help/suggestions would be greatly appreciated.
    Thanks
    -Justin

    ML should have no effect as I have both versions installed with no problems.
    Which app are you trying to update?
    You should use Software Update for FCS 3
    What version have you got?
    Do a "Get Info"

  • Final cut studio 2 upgrade problems

    i recently purchased the upgrade from final cut studio to final cut studio 2. after entering the upgrade serial number it prompts me for the original serial number. after entering this in, it says number invalid. both copies are store bought and i have tried every variation of the numbers, ie. upper case lower case. i've tried calling the store from which i bought the products but they keep referring me to my installation manual.. please help!!!

    There are two upgrade paths.
    One from FCS1 and the other from individual applications.
    The latter is more expensive.
    Which did you buy and from what original purchase? If you got the wrong one, it won't upgrade.

Maybe you are looking for