Final entry issue in Service Entry and PO

Dear SAP Guru,
I am having the situation like this where the servie PO is being created, then service entry and service acceptance are being carried out at ML81N. The PO amount is 100.
When the service PO is being check at the ME2N, the field "Still to be delivered" is showing the amount of 100.
If the Service PO being done the service entry with the amount of 50. The "Still to be delivered" field in ME2N will show the amount of 50 and the "Still to be invoiced" field will show the amount of 50.
If the Serivce PO being done the service entry "Set Final Entry" button being clicked, the "Still to be delivered" field in ME2N will show the amount of 0 and the "Still to be invoiced" field will show the amount of 100.
My question now is that:-
If the Serivce PO being done the service entry "Set Final Entry" button being clicked, the "Still to be delivered" field in ME2N will show the amount of 80 and the "Still to be invoiced" field will show the amount of 20.
What is to be done to make the "Still to be delivered" field in ME2N to show the amount of zero.
Is there any indicator being shown in the PO delivery tab if the "Set Final Entry" button being clicked at ML81N.
Thank you
Regards
Leonard

Hi Tan,
The delivery completion indicator will be hidden mode in normanl service orders. You have to do a liitle customization to bring it in editable mode.
Go to SPRO>material management>purchasing>purchase order>Define Screen Layout at Document Level
Then select field selection PT9F and select GR/IR control. In here for "Delivery completed" indicator check the optional entry and save.
Now check it in the service order and you will be able to see "Delivery completed" indicator.
Regards,
Mohar

Similar Messages

Issue in Service tab and Sourc of supply tab validation in ME51N/ME52N

Hello,
I have requirement in ME51N/ME52N transaction for Validation of service number (under service tab) asigned Agreement number (under Source of Supply Tab)
Requirement is like : get KONNR number(agreement number) from item level than get PACKNO fro EKPO table than get all the service number SRVNO from ESLL table.
now get all the service number from Service Tab at item level.
than validate service number in service tab should belongs to service number available only for selected KONNR number.
I tried with BADI : ME_PROCESS_PR_REQ but there is not a single method is available which will return SRVNO details .
and in user exits we also tried but not able to get correct exit or BADI which should return details of serviced numbers used in PR.
please help to find out the correct way or other solution for this.
thanks and regards,
Tamseel Hashmi

Hi,
Make sure item category D is selected in Purchase Req or Purchase Order.
Thanks
Silas

Service entry sheet can't be changed to update the final entry indicator

Hi All,
Can any body suggest possible reason and a solution for the below?
I am having a situation in which for a service P.O for which partial service enty has been done and for that invoice has also been done.(In production)
Now when I am trying to close the P.O line item by going to service entry sheet by t.code ml81n there i am not able to get the change icon , and hence i am not able to revoke the acceptance of service entry and subsequently I couldn't be able to set the final entry for that.
I tried to do the simulate the same senario in development(testing client) server and it is working fine, could any one sugget the reason and solution how to close the service line item in the P.O .
Regards,
Sushanta

Hi,
That was useful but I checked some other service P.O and for them I am able to see the change icon.
the p.o in my earlier mail are old one of 2002, but they are having partial service entry and invoice against them,
Could any one please tell me under what circumstances I will not be able to see the change icon in the service entry sheet?
Is it if the service entry is done at an old date, i mean earlier date or any other reason.
please let me know soon
Thanks
Sushanta

Final Entry marked without any service entry

Dear Gurus,
I have a service PO with 2 line item, and same service number.
Service entry for the first line item has been successfully created, however when I try to create the SES for the 2nd line item I get the error "Not possible to enter services ("final entry" indicator set)".
There is no PO history for this line item. In EKPO table the Delivery completed indicator has been marked, but since delivery completed indicator field is not active in Service PO, hence this indicator has not been set manually.
Can someone please explain this behaviour, as there is not servcie entry sheet against this line item in PO, I cannot revoke the acceptance and reset the Final entry indicator.
Please share your thoughts.
Regards
Vinay

Hi Rajendra,
If I had selectedFinal entry then, atleast Purchase Order history would have been updated with th Service entry number. But there is no Purchase Order history for this line item.
Also I can see the Delivery completed indicator marked in EKPO table for this line item.
Please advise.
regards
Vinay

Service PO and Service Entry Sheet

Hi
I am practicing on IDES, can anyone provide me documents/links related to subject matter.
What relation service po has with service entry sheet? can anyone explain me in brief?
Thanks and regards,
-Saleel

Hi,
A list of services performed by a vendor on the basis of a purchase order, containing service descriptions and details of quantities and values.The descriptions of planned services deriving from the purchase order are used as default descriptions in the service entry sheet. Unplanned services that were entered in the purchase order without descriptions using value limits are precisely specified in the entry sheet.
Creaion of service entry sheet _ ML81N
Acceptance of service entry sheet - ML85
1. Me21n
2. Give vendor,PO,Pur.Grp.Co.Code,
3. Account Assignment - K (Cost Center)
4. Item category - D (Services)
5. Give Short text (note Do not give material)
6. Po Qty,Net price, Cur,Plant and Sloc.
7. Enter - ne window opens ie Invoice,here you have to give cost center,and G/l account has to be maintain.
8. In Item details you give your service text,Qty,Unit of      measure(Hr,daily,)gross price
   check & save
   Po created under the number 4500015377
A service PO can be closed by ticking the "final Invoice" check box in Item details->"Invoice Tab".
http://www.sap123.com/showthread.php?t=52

Service PO and Service Entry Sheet / MIRO

*Dear SAP Gurus
We have created Service PO - Repairing of AC Machine.    and Service Tab we maintained 10 line items of Parts Qty with Rate.
and we maintained Local Frieght Charges in Header Condition.     upto This stage ALL OKey.
while making MIRO / Service Entry Sheet.   the Local Fridht charges calulating on no of Line Items.
Example ; Local Frieght   : 10000/-     no of line item 10   then showing 10000 x 10 = 10,0000/-
how it will be solved. please guide me...
NOTE : NOT ONLY LOCAL FRIEGHT   IF I PUT OCTORI   IT ALSO SAME HAPPENING.
PLEASE AWAITING FOR YOUR HELP
REGARDS,
*RAJESH **

Hi Rajesh,
Your question is not clear, if you can explain the requirement little more clearly.
Delivery costs are generally not supported in external services
management and in case of blanket purchase orders, item category D or B.
Instead of representing delivery costs via conditions, in case of
service documents, freight costs and other, SAP recommends to add in
additional service lines. Check the OSS Note: 381030 and Note 499575
There is no problem to post
invoice for different vendor for particular SES created for service
line that constitutes delivery costs.
Cheers
Kris

Service PO and Service Entry Sheets Question

Hi Guru,
I need some advice on the following questions in service PO and service entry sheets.
1) How can i change the default unit of measure in service PO? where is this in customizing?
2) How can i turn off the message "No message record could
be found for output of message.Save anyway?" when i try to accept a service entry sheet entry?
3)Can someone share with me the business process for service PO?
Is it a must to do MIRO against the service entry sheet? How does the the person who is performing the MIRO transaction knows the service entry sheet number?
Thanks.
Zhulk

HI,
Following are answers to some of your questions -
1) What do you mean by default unit measure? If this is the unit of Service, then you may change this in Service Master (T Code AC03). If the unit is at line item, then it should be AU, because you may order multiple services under one line each having different units of measure.
2) The message "No message record could be found for output of message. Save anyway?" is displayed because, you have not maintained output message for service entry sheet. Either define the output or remove the warning message at Attributes of system messages.
3) The process of service PO is same as material PO. The difference is that the item category for service PO is 'D' & then you maitain services for the line item either with or without service master. After completion of service, you create service entry sheet at transaction code ML81N & after accepting the service entry sheet, service entry sheet based GRN is prepared. The person who is posting MIRO is not required to know Service Entry Sheet number to post MIRO. The system automatically checks the service entry sheets accepted. Anyway, the service entry sheet number can be displayed at Purchase Order History tab of the conccerned PO at PO display option (T Code ME23N).
Hope your query is fulfilled.
Reward points if the answer is helpful.
Regards,
Prashant Kolhatkar

Pricing procedure for Service PO and Service Entry Sheet

Hi
Can the same pricing procedure be used for Service PO and Service Entry Sheet? What is the purpose of creating a seperate pricing procedure for service entry sheet?
Regards
Soumen

There is no separate pricing procedure for Service Entry Sheet. Whatever the schema is determined in Service PO, the price is calcuated during service entry sheet. However you can maintain separate calculation schema for service purchase orders.
This schema will be determined based on the schema group assigned in Vendor Master.

Service Entry - Final Entry set but still can create new entry sheet

Hi gurus,
got this problem, after I have set the final entry indicator, I am still able to create new service entry sheet... anyone know why?
Note: I am currently on ECC5.
Regards,
Norman

Hi,
First check deletion flag is active in service entry sheet.
If no then first set deletion flag to service entry sheet.
Also check Material document is updated with movement type 102 in purchase order history.
If yes then no problem is exists.
For your verification please create new service entry sheet for same line item. If system give not any error so no any problem.
Regards,
Mahesh Wagh

Final entry in service entry

Is there any way to hide the final entry indicator in Service entry sheet?
Please advice.
Thanks

Hi,
it is not recommended to hide the final entry sheet icone as the delivery completed indicator in the purchase order (EKPO-ELIKZ) is by default hidden ON PURPOSE for service items so
that the control is not performed in the purchase order, but indirectly via the final entry sheet indicator in the respective entry sheet.
Please read the note 735404.
Regards,
Edit

Different GR/IR account for service entry and GRN for non-valuated material

Hi,
Our requirement is GR/IR account while doing service entry and GR/IR account while doing GRN for non-valuated material (UNBW) should be different.
Though we maintain valuation class for material group (Transaction OMQW), system is picking only the valuation class maintained for blank entry in transaction WRX under OBYC setting. The system is ignoring the respective valuation class G/L account. Also if we maintain valuation class for service masters, then also while doing service entry sheet system is picking only the valuation class maintained for blank entry in transaction WRX under OBYC setting
Had i missed out any other setting. Pls help.
Regards

Hi,
In OBYC, please maintain a GL for valuation class 3200 for services and a GL for val class 3300 for Non-valuated material in WRX.
Regards
Ram

Performance issue with select query and for all entries.

hi,
i have a report to be performance tuned.
the database table has around 20 million entries and 25 fields.
so, the report fetches the distinct values of two fields using one select query.
so, the first select query fetches around 150 entries from the table for 2 fields.
then it applies some logic and eliminates some entries and makes entries around 80-90...
and then it again applies the select query on the same table using for all entries applied on the internal table with 80-90 entries...
in short,
it accesses the same database table twice.
so, i tried to get the database table in internal table and apply the logic on internal table and delete the unwanted entries.. but it gave me memory dump, and it wont take that huge amount of data into abap memory...
is around 80-90 entries too much for using "for all entries"?
the logic that is applied to eliminate the entries from internal table is too long, and hence cannot be converted into where clause to convert it into single select..
i really cant find the way out...
please help.

chinmay kulkarni wrote:Chinmay,
Even though you tried to ask the question with detailed explanation, unfortunately it is still not clear.
It is perfectly fine to access the same database twice. If that is working for you, I don't think there is any need to change the logic. As Rob mentioned, 80 or 8000 records is not a problem in "for all entries" clause.
>
> so, i tried to get the database table in internal table and apply the logic on internal table and delete the unwanted entries.. but it gave me memory dump, and it wont take that huge amount of data into abap memory...
>
It is not clear what you tried to do here. Did you try to bring all 20 million records into an internal table? That will certainly cause the program to short dump with memory shortage.
> the logic that is applied to eliminate the entries from internal table is too long, and hence cannot be converted into where clause to convert it into single select..
>
That is fine. Actually, it is better (performance wise) to do much of the work in ABAP than writing a complex WHERE clause that might bog down the database.

Creating Service PO and Service Entry Sheet

Dear gurus,
I want to create a subcontract service PO. I have created new document type. In my account assignment, i assign 'P' and item category, i assign 'D'.
After entering the material short text, plant at the item level, i enter the list of services at the 'item detail' level.
My question:
1) In delivery Tab, do i need to check the 'Goods Receipt' checkbox?
2) In invoice Tab, i checked 'Service based IV', do i also need to check 'GR Based IV'?
Because if i unchecked 'Goods Receipt' in delivery tab, and only check 'Service Based IV' in Invoice tab, i have an error message ' when i do SES in ML81N. The message is 'No matching PO items selected', when i enter the Service PO number.
I went back to amend the service PO, and i checked 'Goods Receipt' in Delivery Tab. Then i am able to do SES in ML81N.
3) In ML81N, the SES number will automatically assign before i save the document? Because if let's say, the SES number is already assigned, and i enter the PO details and so forth, then i do not want to save it, or i would like to cancel it. When i enter another new document, the SES number will be the next assigned document number. Because usually in SAP, all the document number will be provided after we save it.
4) After i save the SES, i go back to view the PO history. i have two documents: SES no (ML81N) and Material Document (MIGO). Is this the correct in the sense that i am not creating GR in MIGO, but in ML81N. Why does the system generate material document for service PO too, since i have SES number.
5) i want to cancel SES document. Therefore, i revoke the acceptance and click 'Save'. The SES document is revoked. And another material document is generated for the reverse GR with movement type 102. If i want to accept the SES again, i need to create new SES or i can use back the 'Revoked' SES?
Appreciate if anyone could help.
Thanks

Hi all,
Thanks for the prompt reply.
Deepak,
Just like you said, material document will be created simultaneously when i release SES. In normal PO, when we do MIGO, we will have one accrual accounts. Can i have another set of accrual accounts just for service only? I would like to seperate the accrual accounts from normal PO. I know there is a setting in tcode OBYC to do this. I checked in transaction 'WRX'. And enter the valuation class for service and the accrual gl account for service. But there is no effect taken when i release the ses. The material document is posted to the normal accrual gl account.
May i know how do i go about this?
And in my accrual accounts, which i check in the gl account line items, tcode FBL3N, i checked from the accrual gl accounts for normal PO (which is reflecting now), the wbs element is actually not copying to the account documents. In my Service PO, i enter 'P' as my account assignment, and i enter the WBS element. In MIGO transaction, i checked the material document of the service PO, there is WBS element for each service line item.
Why is the WBS element not copied during the automatic account posting for accruals?
Thanks,

How to update and retrieve the table control entries and field entries.

Hello everyone,
i have a requirement,
i have    company code , plant, fiscal year, posting period fields in the selection screen and then below that i have a table control which contains 4 fields invoice no., check number, check date and amount.
i have to enter the values and when i press SAVE button , these values have to update in a custom table which i had created.
please send me the coding how to do this object.
will be rewarded.
thanks in advance.

Hi Suresh
this is actual requirement
in the CAT2.
1. Add a new column for WBS description and derive the value as per the FS
2. Retrieve project number and description and update in the column specified
3. When a service order is selected it should do the same for 2.
4. Finally repeat for the worklist view (which is the section above)
   here i am able to display values at data entry area
for service order and network but not worklist area ?
    updation is not coming, can u plz go throw it..
Thanks
Chinna

Synching multiple calendar entries and not displaying events properly

At my work we have Exchange 2003 and all the latest patches / service packs. We setup to synch via SSL on the device. Plus we use Outlook 2003 and 2007 in our environment. Email comes over although delayed at times and contacts, but the calendar is giving us the most issue. Here are the two problems:
1. Synching is not fully talking to Exchange. We create a new calendar entry so that Outlook and iPhone show the event. We then delete it in Outlook and when it synch's it goes back to Outlook. We have even seen multiple events doubling up and trippling up. Anyone else have this issue and know how to fix?
2. The calendar view is missing many appointments that I think I found a fix for in the discussion boards, but wanted to mention the two main areas we're having trouble with.
For people who use the phone in an enterprise environment, what do you feel is the best configuration to use / setup process you followed to have the least amount of issues for the iPhone and using it not trough iTunes but synching via cell network?

Open up Font Book and select all the fonts and try a "validate fonts." You have a duplicate or corrupted font on your system.

Final entry issue in Service Entry and PO

Similar Messages

Maybe you are looking for