Find/Change taking much longer in CS4

Has anyone noticed that find/changes are taking much much longer in CS4
vs. CS3? My script adds a temporary text frame on the first page, then
does a whole bunch of find/changes and then moves that text to the end
of the selected story. These find/changes are taking at least 20x as
long as CS3.

Same exact machine etc. I am using the ME version so this might be an ME bug. That's really what I want to know, if people with the regular version are seeing the same results. This has really put a dent into my work (I spend most of time converting documents from an older publishing system) and has kept me from being able to use CS4.
Here is the code:
var myBold = CreateStyleBold() //This function runs quickly as expected
findChangeGrep("Bold",myBold)
function findChangeGrep(find, change){
app.findGrepPreferences = app.changeGrepPreferences = NothingEnum.nothing;
app.findGrepPreferences.appliedCharacterStyle = myDoc.characterStyles.item("[None]");
app.findGrepPreferences.fontStyle = find;
app.changeGrepPreferences.appliedCharacterStyle = change;
myStory.changeGrep(); //Here is where it is taking a very long time.

Similar Messages

FCPX .0.7 taking much longer to export projects than .06

Hi
Like some others, I'm finding exporting projects both old and new taking much longer in .07 than .06. The work around seems to be using Compressor which I don't have. I also am not getting larger files in export just longer export times.
Any ideas on why this is happening and what can be done to fix?

1) Which codec are you exporting to ?
When exporting FCPx is "rendering" and thus accessing the CPUs core(s). Fcpx 10.0.7 had something fundamental change to it... Certain operations really sped up while others slowed down.
Perhaps this is what you are experiencing.
When you say slower.... Do you mean... Half as fast ?

Why this Query is taking much longer time than expected?

Hi,
I need experts support on the below mentioned issue:
Why this Query is taking much longer time than expected? Sometimes I am getting connection timeout error. Is there any better way to achieve result in shortest time. Below, please find the DDL & DML:
DDL
BHDCollections
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
SET ANSI_PADDING ON
GO
CREATE TABLE [dbo].[BHDCollections](
[BHDCollectionid] [bigint] IDENTITY(1,1) NOT NULL,
[GroupMemberid] [int] NOT NULL,
[BHDDate] [datetime] NOT NULL,
[BHDShift] [varchar](10) NULL,
[SlipValue] [decimal](18, 3) NOT NULL,
[ProcessedValue] [decimal](18, 3) NOT NULL,
[BHDRemarks] [varchar](500) NULL,
[Createdby] [varchar](50) NULL,
[Createdon] [datetime] NULL,
CONSTRAINT [PK_BHDCollections] PRIMARY KEY CLUSTERED
[BHDCollectionid] ASC
)WITH (PAD_INDEX = OFF, STATISTICS_NORECOMPUTE = OFF, IGNORE_DUP_KEY = OFF, ALLOW_ROW_LOCKS = ON, ALLOW_PAGE_LOCKS = ON) ON [PRIMARY]
) ON [PRIMARY]
GO
SET ANSI_PADDING OFF
BHDCollectionsDet
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
CREATE TABLE [dbo].[BHDCollectionsDet](
[CollectionDetailid] [bigint] IDENTITY(1,1) NOT NULL,
[BHDCollectionid] [bigint] NOT NULL,
[Currencyid] [int] NOT NULL,
[Denomination] [decimal](18, 3) NOT NULL,
[Quantity] [int] NOT NULL,
CONSTRAINT [PK_BHDCollectionsDet] PRIMARY KEY CLUSTERED
[CollectionDetailid] ASC
)WITH (PAD_INDEX = OFF, STATISTICS_NORECOMPUTE = OFF, IGNORE_DUP_KEY = OFF, ALLOW_ROW_LOCKS = ON, ALLOW_PAGE_LOCKS = ON) ON [PRIMARY]
) ON [PRIMARY]
Banks
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
SET ANSI_PADDING ON
GO
CREATE TABLE [dbo].[Banks](
[Bankid] [int] IDENTITY(1,1) NOT NULL,
[Bankname] [varchar](50) NOT NULL,
[Bankabbr] [varchar](50) NULL,
[BankContact] [varchar](50) NULL,
[BankTel] [varchar](25) NULL,
[BankFax] [varchar](25) NULL,
[BankEmail] [varchar](50) NULL,
[BankActive] [bit] NULL,
[Createdby] [varchar](50) NULL,
[Createdon] [datetime] NULL,
CONSTRAINT [PK_Banks] PRIMARY KEY CLUSTERED
[Bankid] ASC
)WITH (PAD_INDEX = OFF, STATISTICS_NORECOMPUTE = OFF, IGNORE_DUP_KEY = OFF, ALLOW_ROW_LOCKS = ON, ALLOW_PAGE_LOCKS = ON) ON [PRIMARY]
) ON [PRIMARY]
GO
SET ANSI_PADDING OFF
Groupmembers
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
SET ANSI_PADDING ON
GO
CREATE TABLE [dbo].[GroupMembers](
[GroupMemberid] [int] IDENTITY(1,1) NOT NULL,
[Groupid] [int] NOT NULL,
[BAID] [int] NOT NULL,
[Createdby] [varchar](50) NULL,
[Createdon] [datetime] NULL,
CONSTRAINT [PK_GroupMembers] PRIMARY KEY CLUSTERED
[GroupMemberid] ASC
)WITH (PAD_INDEX = OFF, STATISTICS_NORECOMPUTE = OFF, IGNORE_DUP_KEY = OFF, ALLOW_ROW_LOCKS = ON, ALLOW_PAGE_LOCKS = ON) ON [PRIMARY]
) ON [PRIMARY]
GO
SET ANSI_PADDING OFF
GO
ALTER TABLE [dbo].[GroupMembers] WITH CHECK ADD CONSTRAINT [FK_GroupMembers_BankAccounts] FOREIGN KEY([BAID])
REFERENCES [dbo].[BankAccounts] ([BAID])
GO
ALTER TABLE [dbo].[GroupMembers] CHECK CONSTRAINT [FK_GroupMembers_BankAccounts]
GO
ALTER TABLE [dbo].[GroupMembers] WITH CHECK ADD CONSTRAINT [FK_GroupMembers_Groups] FOREIGN KEY([Groupid])
REFERENCES [dbo].[Groups] ([Groupid])
GO
ALTER TABLE [dbo].[GroupMembers] CHECK CONSTRAINT [FK_GroupMembers_Groups]
BankAccounts
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
SET ANSI_PADDING ON
GO
CREATE TABLE [dbo].[BankAccounts](
[BAID] [int] IDENTITY(1,1) NOT NULL,
[CustomerID] [int] NOT NULL,
[Locationid] [varchar](25) NOT NULL,
[Bankid] [int] NOT NULL,
[BankAccountNo] [varchar](50) NOT NULL,
CONSTRAINT [PK_BankAccounts] PRIMARY KEY CLUSTERED
[BAID] ASC
)WITH (PAD_INDEX = OFF, STATISTICS_NORECOMPUTE = OFF, IGNORE_DUP_KEY = OFF, ALLOW_ROW_LOCKS = ON, ALLOW_PAGE_LOCKS = ON) ON [PRIMARY]
) ON [PRIMARY]
GO
SET ANSI_PADDING OFF
GO
ALTER TABLE [dbo].[BankAccounts] WITH CHECK ADD CONSTRAINT [FK_BankAccounts_Banks] FOREIGN KEY([Bankid])
REFERENCES [dbo].[Banks] ([Bankid])
GO
ALTER TABLE [dbo].[BankAccounts] CHECK CONSTRAINT [FK_BankAccounts_Banks]
GO
ALTER TABLE [dbo].[BankAccounts] WITH CHECK ADD CONSTRAINT [FK_BankAccounts_Locations1] FOREIGN KEY([Locationid])
REFERENCES [dbo].[Locations] ([Locationid])
GO
ALTER TABLE [dbo].[BankAccounts] CHECK CONSTRAINT [FK_BankAccounts_Locations1]
Currency
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
SET ANSI_PADDING ON
GO
CREATE TABLE [dbo].[Currency](
[Currencyid] [int] IDENTITY(1,1) NOT NULL,
[CurrencyISOCode] [varchar](20) NOT NULL,
[CurrencyCountry] [varchar](50) NULL,
[Currency] [varchar](50) NULL,
CONSTRAINT [PK_Currency] PRIMARY KEY CLUSTERED
[Currencyid] ASC
)WITH (PAD_INDEX = OFF, STATISTICS_NORECOMPUTE = OFF, IGNORE_DUP_KEY = OFF, ALLOW_ROW_LOCKS = ON, ALLOW_PAGE_LOCKS = ON) ON [PRIMARY]
) ON [PRIMARY]
GO
SET ANSI_PADDING OFF
CurrencyDetails
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
SET ANSI_PADDING ON
GO
CREATE TABLE [dbo].[CurrencyDetails](
[CurDenid] [int] IDENTITY(1,1) NOT NULL,
[Currencyid] [int] NOT NULL,
[Denomination] [decimal](15, 3) NOT NULL,
[DenominationType] [varchar](25) NOT NULL,
CONSTRAINT [PK_CurrencyDetails] PRIMARY KEY CLUSTERED
[CurDenid] ASC
)WITH (PAD_INDEX = OFF, STATISTICS_NORECOMPUTE = OFF, IGNORE_DUP_KEY = OFF, ALLOW_ROW_LOCKS = ON, ALLOW_PAGE_LOCKS = ON) ON [PRIMARY]
) ON [PRIMARY]
GO
SET ANSI_PADDING OFF
QUERY
WITH TEMP_TABLE AS
SELECT     0 AS COINS, BHDCollectionsDet.Quantity AS BN, BHDCollections.BHDDate AS CollectionDate, BHDCollectionsDet.Currencyid,
                      (BHDCollections.BHDCollectionid) AS DSLIPS, Banks.Bankname
FROM         BHDCollections INNER JOIN
                      BHDCollectionsDet ON BHDCollections.BHDCollectionid = BHDCollectionsDet.BHDCollectionid INNER JOIN
                      GroupMembers ON BHDCollections.GroupMemberid = GroupMembers.GroupMemberid INNER JOIN
                      BankAccounts ON GroupMembers.BAID = BankAccounts.BAID INNER JOIN
                      Currency ON BHDCollectionsDet.Currencyid = Currency.Currencyid INNER JOIN
                      CurrencyDetails ON Currency.Currencyid = CurrencyDetails.Currencyid INNER JOIN
                      Banks ON BankAccounts.Bankid = Banks.Bankid
GROUP BY BHDCollectionsDet.Quantity, BHDCollections.BHDDate, BankAccounts.Bankid, BHDCollectionsDet.Currencyid, CurrencyDetails.DenominationType,
                      CurrencyDetails.Denomination, BHDCollectionsDet.Denomination, Banks.Bankname,BHDCollections.BHDCollectionid
HAVING      (BHDCollections.BHDDate BETWEEN @FromDate AND @ToDate) AND (BankAccounts.Bankid = @Bankid) AND (CurrencyDetails.DenominationType = 'Currency') AND
                      (CurrencyDetails.Denomination = BHDCollectionsDet.Denomination)
UNION ALL
SELECT     BHDCollectionsDet.Quantity AS COINS, 0 AS BN, BHDCollections.BHDDate AS CollectionDate, BHDCollectionsDet.Currencyid,
                      (BHDCollections.BHDCollectionid) AS DSLIPS, Banks.Bankname
FROM         BHDCollections INNER JOIN
                      BHDCollectionsDet ON BHDCollections.BHDCollectionid = BHDCollectionsDet.BHDCollectionid INNER JOIN
                      GroupMembers ON BHDCollections.GroupMemberid = GroupMembers.GroupMemberid INNER JOIN
                      BankAccounts ON GroupMembers.BAID = BankAccounts.BAID INNER JOIN
                      Currency ON BHDCollectionsDet.Currencyid = Currency.Currencyid INNER JOIN
                      CurrencyDetails ON Currency.Currencyid = CurrencyDetails.Currencyid INNER JOIN
                      Banks ON BankAccounts.Bankid = Banks.Bankid
GROUP BY BHDCollectionsDet.Quantity, BHDCollections.BHDDate, BankAccounts.Bankid, BHDCollectionsDet.Currencyid, CurrencyDetails.DenominationType,
                      CurrencyDetails.Denomination, BHDCollectionsDet.Denomination, Banks.Bankname,BHDCollections.BHDCollectionid
HAVING      (BHDCollections.BHDDate BETWEEN @FromDate AND @ToDate) AND (BankAccounts.Bankid = @Bankid) AND (CurrencyDetails.DenominationType = 'COIN') AND
                      (CurrencyDetails.Denomination = BHDCollectionsDet.Denomination)),
TEMP_TABLE2 AS
SELECT CollectionDate,Bankname,DSLIPS AS DSLIPS,SUM(BN) AS BN,SUM(COINS)AS COINS FROM TEMP_TABLE Group By CollectionDate,DSLIPS,Bankname
SELECT CollectionDate,Bankname,count(DSLIPS) AS DSLIPS,sum(BN) AS BN,sum(COINS) AS coins FROM TEMP_TABLE2 Group By CollectionDate,Bankname
HAVING COUNT(DSLIPS)<>0;

Without seeing an execution plan of the query it is hard to suggest something useful. Try insert the result of UNION ALL to the temporary table and then perform an aggregation on that table, not a CTE.
Just
SELECT CollectionDate,Bankname,DSLIPS AS DSLIPS,SUM(BN) AS BN,SUM(COINS)AS COINS FROM
#tmp Group By CollectionDate,DSLIPS,Bankname
HAVING COUNT(DSLIPS)<>0;
Best Regards,Uri Dimant SQL Server MVP,
http://sqlblog.com/blogs/uri_dimant/
MS SQL optimization: MS SQL Development and Optimization
MS SQL Consulting:
Large scale of database and data cleansing
Remote DBA Services:
Improves MS SQL Database Performance
SQL Server Integration Services:
Business Intelligence

HT5521 I have a lightning to usb cable which is 2m in length. Is there any known issues with trying to recharge an iPad 4 with this longer length. It seems to me it is taking much longer than a 1m cord to recharge.

I have a lightning to usb cable which is 2m in length. Is there any known issues with trying to recharge an iPad 4 with this longer length? It seems to me it is taking much longer than a 1m cord to recharge.

Axel,
I'm afraid a new SSD won't be different from your bad USB stick. I had similar issues over USB with both a (no-brand) stick and TWO 64gb Kingston SSDNow's (running Kubuntu 12.04 with Kernel 3.11, ia_64): it all runs exceptionally well (wanna know how it feels like booting in 5 sec?) for a few days - then suddenly you find yourself facing that dreaded (initramfs) prompt. You ask yourself: why? Did I upgrade grub lately? Did I upgrade the Kernel? I don't recall so. Ok, let's fix this... insert favorite live cd, boot, fsck...what???? THOUSANDS of errors??? Hundreds of files and directories corrupted, and the system is unusable - Reinstall everything from scratch onto another drive.
Rinse and repeat: did this 3 times. Then I found this analysis:
http://lkcl.net/reports/ssd_analysis.html
I also suspect USB power interrupts more abruptly than SATA power, at shutdown - basically aggravating any power interruption damages. So now I'm going to:
- buy an Intel S3500!
- add commit=1 to my mount options in /etc/fstab
- edit shutdown procedure to add a 5-10 sec pause after unmounting drives.
Just my two cents.
Andrea
Last edited by andreius (2013-12-29 16:51:04)

My MacBook Pro (purchased in 2011) is taking 10 minutes to boot-up. It's also taking much longer to open files. I have 650 GB out of 700 GB left on my machine so it's not that I've overloaded the memory. Is anyone else having this problem?

My MacBook Pro (purchased in 2011) is taking 10 minutes to boot-up. It's also taking much longer to open files. I have 650 GB out of 700 GB left on my machine so it's not that I've overloaded the memory. Is anyone else having this problem?

Look at this comprehensive trouble shooting document;
https://discussions.apple.com/docs/DOC-3353
I suggest that you start with SMC and PRAM resets.
Then a Safe Boot.
Ciao.

Recently my adobe is taking much longer to load PDF files that used to open immediately

recently my adobe is taking much longer to load PDF files that used to load almost instantly

Look at this comprehensive trouble shooting document;
https://discussions.apple.com/docs/DOC-3353
I suggest that you start with SMC and PRAM resets.
Then a Safe Boot.
Ciao.

I moved my music from the c drive to the d drive. All of my music is in itunes but my ipod won't sync with itunes. The syncing process is taking much longer than usual too. I left my ipod over night to sync and it didnt finish. Fails to sync every time.

I moved my music from the c drive to the d drive. All of my music is in itunes but my ipod won't sync with itunes. The syncing process is taking much longer than usual too. I left my ipod over night to sync and it didnt finish. Fails to sync every time. I tried to restore my ipod and it didnt help.

Ignore. I figured it out:)

KeyNote '08 Taking Much Longer than KeyNote '06

Hello All,
Up to a month ago, we were running iWorks '06 on a 2.16GHz(white plastic, Serial # W87...) iMac. Just upgraded to iWorks '08 on a 2.4GHz (metal, Serial # W88...) iMac.
We use large (5mb) animated gifs in our KeyNote presentations. The initial KeyNote setup would process the animated gif to the slide (as determined by the presence of the spinning "color wheel") within a few seconds. This newer setup, however, takes 2-3 minutes.
This is a big step backward for us. Any suggestions as to how we can speed up this processing?
Thanks,
Shawn Rampy
Message was edited by: wxman123

1) Which codec are you exporting to ?
When exporting FCPx is "rendering" and thus accessing the CPUs core(s). Fcpx 10.0.7 had something fundamental change to it... Certain operations really sped up while others slowed down.
Perhaps this is what you are experiencing.
When you say slower.... Do you mean... Half as fast ?

Cursor taking much longer time

Is there any solution to optimize this? As it is taking more than 2 hours to update the table.
Stats about the table records count:
table_1 = 0.3milliions
table_2 = 89k
table_3 = 2.5 millions
table_4 = 6k
=========================================
cursor c1 is
SELECT SUM (A.w_amount) AS total_comp, D.emp_no
FROM table_1 A,
table_2 B,
table_3 C,
table_4 D
WHERE A.emp_no = B.emp_no
AND A.check_id = B.check_id
AND A.emp_no = C.emp_no
AND D.emp_no = C.emp_no
AND A.earn_code IN ('REM')
AND B.check_date >= C.elig_dt
AND ee.time_s_key = user2.time_pkg.fx_time_key()
GROUP BY D.emp_no;
BEGIN
FOR cur_row IN c1
LOOP
UPDATE table_4
SET gross_comp = cur_row.total_comp
WHERE cur_row.emp_no = table_4.emp_no;
END LOOP;
END;
======================================

time_key_var := user2.time_pkg.fx_time_key();
update table_4 D
set gross_comp = (
SELECT SUM (A.w_amount) AS total_comp, D.emp_no
FROM table_1 A,
table_2 B,
table_3 C
WHERE A.emp_no = B.emp_no
AND A.check_id = B.check_id
AND A.emp_no = C.emp_no
AND D.emp_no = C.emp_no
AND A.earn_code IN ('REM')
AND B.check_date >= C.elig_dt
AND ee.time_s_key = time_key_var
GROUP BY D.emp_no
where exists (
SELECT null
FROM table_1 A,
table_2 B,
table_3 C
WHERE A.emp_no = B.emp_no
AND A.check_id = B.check_id
AND A.emp_no = C.emp_no
AND D.emp_no = C.emp_no
AND A.earn_code IN ('REM')
AND B.check_date >= C.elig_dt
AND ee.time_s_key = time_key_var
);

Why is it taking so long for folders to open in Explorer?

Hi,
I have noticed that when I click on a folder in Explorer (not IE), the green status bar moves slowly across the top and it takes maybe 5 seconds for the folder to open. The drive that has the folder is indexed as far as I know. I have also noticed in M$ Access that queries are taking much longer to run than in Vista.
Could these two be related in some way?

Hi,
Mostly, the issue is caused by third party software. Does the issue occur in Safe Mode or Clean boot?
For your convenience:
How to take a Clean Boot
===========================
1. Click Start, type "MSCONFIG" (without the quotations) in the Search Bar and Press "Enter" to start the System Configuration Utility.
2. Click the "Services" tab, check the "Hide All Microsoft Services" box and click "Disable All" (if it is not gray).
3. Click the "Startup" tab, click "Disable All" and click "OK".
4. Restart the computer and test the issue.
Note: Clean Boot is a troubleshooting step. If some programs have been disabled, we can re-enable them later. If you see the System Configuration Utility, check the box of "Don't show this message" and then click "OK".
Please monitor the system in the Clean Boot environment. If the problem does not occur, it indicates that the problem is related to one application or service we have disabled. You may use the MSCONFIG tool again to re-enable the disabled item one by one to find out the culprit.
Hope it helps.

AE CC - saving projects takes much longer than in CS6

I've noticed that After Effects CC takes much longer to save my current project than previously (about 2-3 minutes). I'm used to saving quite often so this is slowing down my workflow.
The project was imported from AE CS6. I've tried starting a new project and importing the previous one manually (instead of a conversion). Same lag.
All unused footage has been taken out and the footage has been consolidated.
The AE CS6 project file and AE CC file are about 15mb so CC is not any bigger.
There are about 50 files in Arri Raw 3K, the rest is in DPX and ProRes 1080p.
I'm working from a Macbook Pro Retina 16GB Ram and all media and cache are on an external Lacie Big Disk thunderbolt Raid SSD.
My impression is that AE CC is indexing all the files before saving so it's going through all the RAW sequenced files. This could slow down the saving process quite a lot.
Is anyone experiencing the same lag time while saving projects?

I'm having the same issue on my PC, saving is taking much longer and is also happening every time I RAM preview. Very strange, and in fact now its having trouble accessing the save location, a local hard drive. any answers for this isse?

IOS 8.0.2 download that is taking too long?

I have an iPhone 4s and downloaded iOS 8.0.2 onto my iTunes and into my phone within 2 hours. My sister has an iPhone 5 and iOS 8.0.2 has already been downloaded onto her iTunes. The only process left is to have the download completed on her phone, but that is taking much longer than the actual iOS 8 download to iTunes. The download bar on the phone has almost reached the end, but has stuck at the same place for the last hour. (This did not happen with my phone.)
I have unplugged the phone from the computer, but the download bar is still visible with the same point that has not moved a bit. How can this be fixed? How can I increase the download speed? Or do I have to patiently wait? Please help!

If you unplugged the phone from the computer, you have already interrupted the download and install process. An update via iTunes is not a Wifi update, so once it's unplugged, it is not going to start up again.
Reset the device: Hold down the Home and Power buttons at the same time and continue to hold them down until the Apple appears (up to 30 seconds). Once the reset is complete, the "Slide to Unlock" screen will display. Go to Settings>General>About, and see what version number is showing. If it is 8.0.2, then you should be good to go. If it is not, hook the device back up to iTunes and start the update again.
Cheers,
GB

My macbook pro is taking too long to load

I recently droped my macbook and had to have the hard drive replace. I just got it back, but its taking much longer to load. There is now a light blue screen first, then it swithches to another blue screen with an apple symbol with that thinking circle thing, followed by a darker blue screen with an arrow in top right corner. Then it finally loades. What is Wrong with my macbook?

Check the Startup Disk in System Preferences and make sure your HDD is selected.
Does this happen everytime you re-boot?

Text find and change problem in CS3 and CS4 script

I use the script below to find some text and change into others.
There is one thing the script can't do it for me.
Example:
(g) Management
(1) that no law which is enacted in the Cayman Islands imposing any tax to be levied on profits, income, gains or appreciation shall apply to the Company or its operations; and
(2) that the aforesaid tax or any tax in the nature of estate duty or inheritance tax shall not be payable on or in respect of the shares, debentures or other obligations of the Company.
Example:(END)
I got a lot of topics or points in the passage. And I want to change the space between '(g)' and 'Management' into a tab character. So I revised the plain text file 1text.
PS: 1text.txt is filled with what to change.
text {findWhat:"^p(^?) "} {changeTo:"^p(^?)^t"} {includeFootnotes:true, includeMasterPages:true, includeHiddenLayers:true, wholeWord:false} Find all space-dash-space and replace with an en dash.
The result is:
(^?)^tManagement
(^?)^tthat no law which is enacted in the Cayman Islands imposing any tax to be levied on profits, income, gains or appreciation shall apply to the Company or its operations; and
(^?)^tthat the aforesaid tax or any tax in the nature of estate duty or inheritance tax shall not be payable on or in respect of the shares, debentures or other obligations of the Company.
PS: ^t is a tab character.
result (END)
This is not what I want.
It should be '(g)^tManagement'.
PS: ^t is a tab character.
Please someboady help me out to revised the script below to change the text into what I want. Thanks so much.
Here is the script.
//FindChangeByList.jsx
//An InDesign CS4 JavaScript
@@@BUILDINFO@@@ "FindChangeByList.jsx" 2.0.0.0 10-January-2008
//Loads a series of tab-delimited strings from a text file, then performs a series
//of find/change operations based on the strings read from the file.
//The data file is tab-delimited, with carriage returns separating records.
//The format of each record in the file is:
//findType<tab>findProperties<tab>changeProperties<tab>findChangeOptions<tab>description
//Where:
//<tab> is a tab character
//findType is "text", "grep", or "glyph" (this sets the type of find/change operation to use).
//findProperties is a properties record (as text) of the find preferences.
//changeProperties is a properties record (as text) of the change preferences.
//findChangeOptions is a properties record (as text) of the find/change options.
//description is a description of the find/change operation
//Very simple example:
//text {findWhat:"--"} {changeTo:"^_"} {includeFootnotes:true, includeMasterPages:true, includeHiddenLayers:true, wholeWord:false} Find all double dashes and replace with an em dash.
//More complex example:
//text {findWhat:"^9^9.^9^9"} {appliedCharacterStyle:"price"} {include footnotes:true, include master pages:true, include hidden layers:true, whole word:false} Find $10.00 to $99.99 and apply the character style "price".
//All InDesign search metacharacters are allowed in the "findWhat" and "changeTo" properties for findTextPreferences and changeTextPreferences.
//If you enter backslashes in the findWhat property of the findGrepPreferences object, they must be "escaped"
//as shown in the example below:
//{findWhat:"\\s+"}
//For more on InDesign scripting, go to http://www.adobe.com/products/indesign/scripting/index.html
//or visit the InDesign Scripting User to User forum at http://www.adobeforums.com
main();
function main(){
var myObject;
//Make certain that user interaction (display of dialogs, etc.) is turned on.
app.scriptPreferences.userInteractionLevel = UserInteractionLevels.interactWithAll;
if(app.documents.length > 0){
if(app.selection.length > 0){
   switch(app.selection[0].constructor.name){
    case "InsertionPoint":
    case "Character":
    case "Word":
    case "TextStyleRange":
    case "Line":
    case "Paragraph":
    case "TextColumn":
    case "Text":
    case "Cell":
    case "Column":
    case "Row":
    case "Table":
     myDisplayDialog();
     break;
    default:
     //Something was selected, but it wasn't a text object, so search the document.
     myFindChangeByList(app.documents.item(0));
else{
   //Nothing was selected, so simply search the document.
   myFindChangeByList(app.documents.item(0));
else{
alert("No documents are open. Please open a document and try again.");
function myDisplayDialog(){
var myObject;
var myDialog = app.dialogs.add({name:"FindChangeByList"});
with(myDialog.dialogColumns.add()){
with(dialogRows.add()){
   with(dialogColumns.add()){
    staticTexts.add({staticLabel:"Search Range:"});
   var myRangeButtons = radiobuttonGroups.add();
   with(myRangeButtons){
    radiobuttonControls.add({staticLabel:"Document", checkedState:true});
    radiobuttonControls.add({staticLabel:"Selected Story"});
    if(app.selection[0].contents != ""){
     radiobuttonControls.add({staticLabel:"Selection", checkedState:true});
var myResult = myDialog.show();
if(myResult == true){
switch(myRangeButtons.selectedButton){
   case 0:
    myObject = app.documents.item(0);
    break;
   case 1:
    myObject = app.selection[0].parentStory;
    break;
   case 2:
    myObject = app.selection[0];
    break;
myDialog.destroy();
myFindChangeByList(myObject);
else{
myDialog.destroy();
function myFindChangeByList(myObject){
var myScriptFileName, myFindChangeFile, myFindChangeFileName, myScriptFile, myResult;
var myFindChangeArray, myFindPreferences, myChangePreferences, myFindLimit, myStory;
var myStartCharacter, myEndCharacter;
var myFindChangeFile = myFindFile("/FindChangeSupport/1test.txt")
if(myFindChangeFile != null){
myFindChangeFile = File(myFindChangeFile);
var myResult = myFindChangeFile.open("r", undefined, undefined);
if(myResult == true){
   //Loop through the find/change operations.
   do{
    myLine = myFindChangeFile.readln();
    //Ignore comment lines and blank lines.
    if((myLine.substring(0,4)=="text")||(myLine.substring(0,4)=="grep")||(myLine.substring(0, 5)=="glyph")){
     myFindChangeArray = myLine.split("\t");
     //The first field in the line is the findType string.
     myFindType = myFindChangeArray[0];
     //The second field in the line is the FindPreferences string.
     myFindPreferences = myFindChangeArray[1];
     //The second field in the line is the ChangePreferences string.
     myChangePreferences = myFindChangeArray[2];
     //The fourth field is the range--used only by text find/change.
     myFindChangeOptions = myFindChangeArray[3];
     switch(myFindType){
      case "text":
       myFindText(myObject, myFindPreferences, myChangePreferences, myFindChangeOptions);
       break;
      case "grep":
       myFindGrep(myObject, myFindPreferences, myChangePreferences, myFindChangeOptions);
       break;
      case "glyph":
       myFindGlyph(myObject, myFindPreferences, myChangePreferences, myFindChangeOptions);
       break;
   } while(myFindChangeFile.eof == false);
   myFindChangeFile.close();
function myFindText(myObject, myFindPreferences, myChangePreferences, myFindChangeOptions){
//Reset the find/change preferences before each search.
app.changeTextPreferences = NothingEnum.nothing;
app.findTextPreferences = NothingEnum.nothing;
var myString = "app.findTextPreferences.properties = "+ myFindPreferences + ";";
myString += "app.changeTextPreferences.properties = " + myChangePreferences + ";";
myString += "app.findChangeTextOptions.properties = " + myFindChangeOptions + ";";
app.doScript(myString, ScriptLanguage.javascript);
myFoundItems = myObject.changeText();
//Reset the find/change preferences after each search.
app.changeTextPreferences = NothingEnum.nothing;
app.findTextPreferences = NothingEnum.nothing;
function myFindGrep(myObject, myFindPreferences, myChangePreferences, myFindChangeOptions){
//Reset the find/change grep preferences before each search.
app.changeGrepPreferences = NothingEnum.nothing;
app.findGrepPreferences = NothingEnum.nothing;
var myString = "app.findGrepPreferences.properties = "+ myFindPreferences + ";";
myString += "app.changeGrepPreferences.properties = " + myChangePreferences + ";";
myString += "app.findChangeGrepOptions.properties = " + myFindChangeOptions + ";";
app.doScript(myString, ScriptLanguage.javascript);
var myFoundItems = myObject.changeGrep();
//Reset the find/change grep preferences after each search.
app.changeGrepPreferences = NothingEnum.nothing;
app.findGrepPreferences = NothingEnum.nothing;
function myFindGlyph(myObject, myFindPreferences, myChangePreferences, myFindChangeOptions){
//Reset the find/change glyph preferences before each search.
app.changeGlyphPreferences = NothingEnum.nothing;
app.findGlyphPreferences = NothingEnum.nothing;
var myString = "app.findGlyphPreferences.properties = "+ myFindPreferences + ";";
myString += "app.changeGlyphPreferences.properties = " + myChangePreferences + ";";
myString += "app.findChangeGlyphOptions.properties = " + myFindChangeOptions + ";";
app.doScript(myString, ScriptLanguage.javascript);
var myFoundItems = myObject.changeGlyph();
//Reset the find/change glyph preferences after each search.
app.changeGlyphPreferences = NothingEnum.nothing;
app.findGlyphPreferences = NothingEnum.nothing;
function myFindFile(myFilePath){
var myScriptFile = myGetScriptPath();
var myScriptFile = File(myScriptFile);
var myScriptFolder = myScriptFile.path;
myFilePath = myScriptFolder + myFilePath;
if(File(myFilePath).exists == false){
//Display a dialog.
myFilePath = File.openDialog("Choose the file containing your find/change list");
return myFilePath;
function myGetScriptPath(){
try{
myFile = app.activeScript;
catch(myError){
myFile = myError.fileName;
return myFile;

It takes me a lof of time to comprehend the sentence you write. Cause I am a Chinese. My poor English.
I have to say "you are genius". I used to use the indesign CS2. There is no GREP function in CS2. When I get the new script, I do not know how to use it. Just when I saw the
'grep {findWhat:" +"} {changeTo:" "} {includeFootnotes:true, includeMasterPages:true, includeHiddenLayers:true, wholeWord:false} Find all double spaces and replace with single spaces.'
Being confused.
Thanks so much. It seems I have to relearn the advanced Indesign.

I was backing up my iphone by changing the location of library beacause i don't have enough space.My phone was taking too long to copying file so i can celled it.the data is stored in desired location . And now i can't delete that back up

I was backing up my iphone by changing the location of library because i don't have enough space.My phone was taking too long to copying file so i can celled it.the data is stored in desired location . And now i can't delete that back up.
Also tell me about the performance of iphone 4 with ios 7.1.1...........
T0X1C

rabidrabbit wrote:
Can I back up my iPhone 4S to my ipad 3 (64 gb)?
no
rabidrabbit wrote:
However, now I don't have enough space in iCloud to backup either device. Why not?
iCloud only give so much space for free storage, then if you exceed the limit of 5gb you have to pay for additional storage.

Find/Change taking much longer in CS4

Similar Messages

Maybe you are looking for