Find out the orgunit id of each document

hello guys...
i execute fm 'crm_order_read' for all the guid to recover the orgunit id of the doc.
after that i want to find out the orgunit id of each document.and how they are link ...

thanks for reply raj.
but my requirment is i have to capture org unit id as display in transaction PPOMA_CRM for example when u goes to the transaction u can c for perticular bussiness partner u c there is one id like O 50000402
i want to capture this id for perticlar doc.

Similar Messages

How do I find out the exact path of each and every file that LabVIEW finds and loads into memory for a given top level vi?

How do I find out the exact path of each and every file that LabVIEW finds and loads into memory for a given top level vi? There is probably a trivial, easy way to get this info, but I have not yet found it! Thanks..

Or if you want to grab all the paths programatically, try the attached VI.
Open the top level that you want all the paths from and close all others, then open the
attached and run it. It will return an array of all the VIs that the VI
in question uses, including vi.lib VIs. You can filter these as well if
you like.
Ed
Message Edited by Ed Dickens on 08-01-2005 07:01 PM
Ed Dickens - Certified LabVIEW Architect - DISTek Integration, Inc. - NI Certified Alliance Partner
Using the Abort button to stop your VI is like using a tree to stop your car. It works, but there may be consequences.
Attachments:
Get all paths.vi ‏29 KB

How find out the duplicate value from each columns.

I have below four columns,
How can i find out the duplicate value from each columns.
with All_files as (
select '1000' as INVOICE,'2000' AS DELIVERYNOTE,'3000' CANDELINVOICE,'4000' CANDELIVERYNOTE from dual union all
select '5000','6000','7000','8000' from dual union all
select '9000','1000','1100','1200' from dual union all
select '1200','3400','6700','8790' from dual union all
select '1000','2000','3000','9000' from dual union all
select '1230','2340','3450','4560' from dual
SELECT * FROM All_files
Output should be as per below.
1000 2000 3000 4000
9000 1000 1100 1200
1200 3400 6700 8790
1000 2000 3000 9000
Required to check uniqueness in cross columns.
Thanks.

Try this (sorry about the formatting)...
WITH all_files AS (SELECT   '1000' AS INVOICE,
                            '2000' AS DELIVERYNOTE,
                            '3000' CANDELINVOICE,
                            '4000' CANDELIVERYNOTE
                     FROM   DUAL
                   UNION ALL
                   SELECT   '5000',
                            '6000',
                            '7000',
                            '8000'
                     FROM   DUAL
                   UNION ALL
                   SELECT   '9000',
                            '1000',
                            '1100',
                            '1200'
                     FROM   DUAL
                   UNION ALL
                   SELECT   '1200',
                            '3400',
                            '6700',
                            '8790'
                     FROM   DUAL
                   UNION ALL
                   SELECT   '1000',
                            '2000',
                            '3000',
                            '9000'
                     FROM   DUAL
                   UNION ALL
                   SELECT   '1230',
                            '2340',
                            '3450',
                            '4560'
                     FROM   DUAL),
    t_base
       AS (SELECT      invoice
                    || ','
                    || deliverynote
                    || ','
                    || candelinvoice
                    || ','
                    || candeliverynote
                       str
             FROM   all_files),
    t_str
       AS (SELECT   str || ',' AS str,
                    (LENGTH (str) - LENGTH (REPLACE (str, ','))) + 1
                       AS no_of_elements
             FROM   t_base),
    t_n_rows
       AS (    SELECT   LEVEL AS i
                 FROM   DUAL
           CONNECT BY   LEVEL <=
                           (    SELECT   SUM (no_of_elements) FROM t_str)),
    t_build AS (SELECT   t_str.str,
                         nt.i AS element_no,
                         INSTR (t_str.str,
                                DECODE (nt.i, 1, 0, 1),
                                DECODE (nt.i, 1, 1, nt.i - 1))
                         + 1
                            AS start_pos,
                         INSTR (t_str.str,
                                1,
                                DECODE (nt.i, 1, 1, nt.i))
                            AS next_pos
                  FROM      t_str
                         JOIN
                            t_n_rows nt
                         ON nt.i <= t_str.no_of_elements),
    t_build2
       AS (SELECT   RTRIM (str, ',') AS original_string,
                    SUBSTR (str, start_pos, (next_pos - start_pos))
                       AS single_element,
                    element_no
             FROM   t_build),
    t_build3
       AS (SELECT   single_element,
                    COUNT( * )
                       OVER (PARTITION BY single_element
                             ORDER BY single_element)
                       ele_count
             FROM   t_build2)
SELECT   DISTINCT INVOICE,
                  DELIVERYNOTE,
                  CANDELINVOICE,
                  CANDELIVERYNOTE
FROM   all_files, t_build3
WHERE   ele_count > 1
         AND (   INVOICE = single_element
              OR DELIVERYNOTE = single_element
              OR CANDELINVOICE = single_element
              OR CANDELIVERYNOTE = single_element)I think this will be faster than the previous solution?
Cheers
Ben
Edited by: Munky on Feb 17, 2011 2:11 PM - "I think this will be faster than the previous solution?", nope - it's not :(

Table to find out the class attached to a document in DMS

Hi,
I would like to know how can i get the class attached to a document in Document
Management System. Is there any database table ???

KLAH-CLASS ------------------------------------------------------- (class name)
KLAH-KLART = KSSK-KLART ---------------------------------- (class type)
KLAH-CLINT = KSSK-CLINT
KSSK-OBJEK = INOB-OBJEK ---------(DOKAR+DOKNR+DOKVR+DOKTL)
INOB-OBTAB = 'DRAW' ----- (table name)
but i suggest you to use BAPI_DOCUMENT_GETDETAIL2

How to find out the node count?

How to find out the node count in illustrator document through programmatically. Kindly advice me.

Check DBA_HIST_RESOURCE_LIMIT. Your information will be there.
Simialr information is available in DBA_HIST_SYSSTAT.
Look for stat name logons cumulative/logons current - Total number of logons since the instance started/Total number of current logons
You can joing dba_hist_snapshot with snap_id and give begin_interval_time and end_interval_time to know historic process utilization.
Regards,
Sreejith

How can I find out the percentage of space taken up by a vector in a document?

Hi all,
I've been doing visual research over the last couple of years, and part of this has resulted in hundreds of in-design documents with vectors of varying sizes in each. Essentially, I'm hoping to find a quick way to find out the percentage of space occupied by these vectors. I can't figure out how to go in to each document and find the info on the selected vector. I know that Photoshop has options to see pixels when using selection tools, but I've found this both cumbersome and inaccurate.
Any ideas would be greatly appreciated!
Cheers,
Kevin

java.io.BufferedReader in = new java.io.BufferedReader( new java.io.FileReader( "YourFile.txt" ) );
int lineCount = 0;
while( in.readLine() != null )
lineCount ++;
System.out.println( "Line Count = " + lineCount );

How do I find out the size of each individual element within a photoshop file as need to replace some elements? Thanks :)

How do I find out the size of each individual element within a photoshop file as need to replace some elements? Thanks

What do you mean by "Elements"?
Elements in a flat image or Layers?
Could you please post a screenshot with the Layers Panel visible?

How to find out the condition type of the tax code in the PO document

Hi friends,
My questions is how to find out the condition type of the tax code in the PO document.
When you use me23n to display one PO document. In the invoice tab, there is one text field named 'tax code' whose value could be T1, T2, J1, J2 and so on. Beside the text field, there is one button named taxes. When you click the button taxes, it will show you the condition type of the tax code. For example, if the tax code is 'T1', then its condition type 'mwcn'.
I want to use the information on the PO to find out the value 'mwcn' of the tax code 'T1'. Could anybody help to describe the logic?it looks like the value is saved in the table konp. But I don't know the logic. Please describe. Thank you.

Hi,
Hope you have asked for select query..
select single knumh from a003 into wa_knumh
where mwskz = wa_itpotab-mwskz
and kappl = 'TX'
and aland = 'IN'.
select single kbetr from konp into wa_kbetr
where knumh = wa_knumh.
cheers,
Dep

How to find out the Pixel Dimensions and Document Size of placed images?

Is it possible to find out the placed image details like Pixel Dimensions(Width,Height) Document Size(Width,Height) in illustrator through scripting. Kindly advice me with some examples.

http://www.adobeforums.com/webx/.3bbaa316.59b84fd8
I hope the snippet therein will get you started.
But after all, when you place an image via pi=layer.placedItems.add() it should pop in with its default dimensions, so that you have pi.height and pi.width ready.
Is this what you are aiming at?

How to find out the encoding of an XML input document

Hello all,
I read a XML file into a DOM document and would like to save it back in the same encoding as the input. How do I find out the encoding of the input document?
This is my code for reading the document:
import java.io.File;
import java.io.FileInputStream;
import javax.xml.transform.Transformer;
import javax.xml.transform.TransformerFactory;
import javax.xml.transform.dom.DOMResult;
import javax.xml.transform.stream.StreamSource;
import org.w3c.dom.Document;
Transformer transformer = TransformerFactory.newInstance().newTransformer();
DOMResult domResult = new DOMResult();
transformer.transform(new StreamSource(new FileInputStream(fileName)),
domResult);
Document doc = (Document)domResult.getNode();
.

FileInputStream fis = new FileInputStream(fileName);
String encoding = new InputSource(fis).getEncoding();
fis.close();Note that this only works because you can get an InputStream over the document twice. If the document were coming from an HTTP response (for example) it wouldn't work.

To find out the min and max memory been used by each parameter under SGA_MA

Hi,
Can any please tell me how to find out the min and max memory been used by each parameter under SGA_MAX and SGA_TARGET ? below is the db CRMS65T. If any such script is there please provide me
SQL> select name from v$database;
NAME
CRMS65T
SQL> show parameter sga
NAME                                 TYPE        VALUE
lock_sga                             boolean     FALSE
pre_page_sga                         boolean     FALSE
sga_max_size                         big integer 1000M
sga_target                           big integer 1000MThanks in advance

Can any please tell me how to find out the min and max memory been used by each parameter under SGA_MAX and SGA_TARGET ? below is the db CRMS65T. If any such script is there please provide meI guess your question is, each memory components of SGA? if so
SQL> select * from v$sgainfo;
NAME                                  BYTES RES
Fixed SGA Size                      2088504 No
Redo Buffers                       18882560 No
Buffer Cache Size                 616562688 Yes
Shared Pool Size                  301989888 Yes
Large Pool Size                     4194304 Yes
Java Pool Size                      4194304 Yes
Streams Pool Size                         0 Yes
Granule Size                        4194304 No
Maximum SGA Size                  947912704 No
Startup overhead in Shared Pool   125829120 No
Free SGA Memory Available                 0Also check
SQL> select COMPONENT,CURRENT_SIZE,MIN_SIZE,MAX_SIZE,USER_SPECIFIED_SIZE from v$sga_dynamic_components;
shared pool                                                         301989888 301989888          0           209715200
large pool                                                            4194304    4194304          0             4194304
java pool                                                             4194304    4194304          0             4194304
streams pool                                                                0          0          0                   0
DEFAULT buffer cache                                                616562688 616562688          0           603979776
KEEP buffer cache                                                           0          0          0                   0
RECYCLE buffer cache                                                        0          0          0                   0
DEFAULT 2K buffer cache                                                     0          0          0                   0
DEFAULT 4K buffer cache                                                     0          0          0                   0
DEFAULT 8K buffer cache                                                     0          0          0                   0
DEFAULT 16K buffer cache                                                    0          0          0                   0
DEFAULT 32K buffer cache                                                    0          0          0                   0
ASM Buffer Cache                                                            0          0          0           603979776
13 rows selected.
SQL>Edited by: CKPT on Sep 19, 2011 8:55 AM

Need to find out the account group given the accounting document number

I am new to SAP. Please help.
Need to find out the account group given the accounting document number?

If you are asking about account assignment group then that can be seen in billing document -> Header -> Accounting Data.

Is it possible to find out if a certain type of document is available inside a document-set by the help of workflows?

Is it possible to find out if a certain type of document is available inside a document-set by the help of workflows?

Hi,
According to your post, my understanding is that you wanted to find out if a certain type of document is available inside a document-set.
Per my knowleadge, there is no out of the box way to accomplish this with SharePoint Designer Workflow.
To find the content type inside a document-set, there are two methods:
First, open a document set, click “New Document” option, then you can find the available content type in the document set.
Second, open the document set content type, open Document Set Settings Page, then you can see the available content type.
More information:
What is Document Sets in SharePoint 2010?
Best Regards,
Linda Li
Linda Li
TechNet Community Support

Where I can find out the related documents of ATS ?

Hello, we would like to pass the Accessory Test System(ATS) to get certification of Apple, could you show me where I can find out the related documents of ATS ?Thanks!

RaviBeniwal;
Check the following KnowledgeBase Article (Windows):
Determining System Fonts and Programmatically Assigning Them to Controls and Indicators
Regards;
Enrique Vargas
www.visecurity.com
www.vartortech.com

How to find out the locale setting in a browser?

In my Java web project, the multi-lingual issue on the JSP pages is handled by JSTL. It works fine so far for any input messages. However, some messages come from the container. It is needed to find out the browser's country and language settings inside of the container. My question is how to find out the settings?
Thanks in advance.
v.

Hi, this I found on James' website--see http://www.rf.net/~james/perli18n.html#Q28
Q28. Can web servers automatically detect the language of the browser and display the correct localized page?
A28. Yes. HTTP/1.1 defines the details of how content negotiation works, including language content.
WWW browsers send an Accept-Language request header specifying which languages are preferred for responses. This technique works fairly well, although some versions of Netscape Navigator send an improperly formatted request parameter. Also, switching language preferences in either Navigator or IE 4 doesn't always "take" without first deleting a language hint.
Few sites do content-negotiation on language, and interestingly enough I do not know of any major portals doing this. One site that does is Sun's documentation library at SunDocs. Debian.org does a very nice job of using Apache content negotiation wih languages and also has some nice help info too on Setting the Default Language.
Apache's Content Negotiation features will select the right page to return, whether HTML or image file. Annoyingly, the match logic is very literal, so a browser request for en-us will not match a server entry of en except as a last resort. Any other exact match will win over en, even if en-us was first preference.
There are 2 ways of doing content negotiation with Apache: type or variant maps and multiviews.
Variant Maps
In httpd.conf, disable Options Multiviews if configured and add
AddType type-var var
DirectoryIndex index.var
Then create an index.var file like this:
URI: start; vary="type,language"
URI: index.html.en
Content-type: text/html
Content-language: en-GB
URI: index.html.en
Content-type: text/html
Content-language: en-US
URI: index.html.en
Content-type: text/html
Content-language: en
URI: index.html.fr
Content-type: text/html
Content-language: fr-CA
URI: index.html.fr
Content-type: text/html
Content-language: fr
URI: index.html.es
Content-type: text/html
Content-language: es
Multiviews
The multiviews technique works like this. This does add extra server load, as each content directory must be scanned for the variant document names.
index.html is localized into variant documents such as:
index.html.en (or index.en.html)
index.html.fr
index.html.es
index.html (or index.html.html as a reader has recommended) symlinked to one of the above as the last resort.
Here's an example of http.conf directives for this:
# in httpd.conf
AddLanguage en .en
AddLanguage fr .fr
AddLanguage es .es
# LanguagePriority allows you to give precedence to some languages
# in case of a tie during content negotiation.
# Just list the languages in decreasing order of preference.
LanguagePriority en es fr de pt
Options Multiviews
# end of httpd.conf fragment
Starting in Apache 1.2, you may also create documents with multiple language extensions.
O'Reilly's Apache - The Definitive Guide, Chapter 6
ApacheWeek article on Language Negotiation
Another ApacheWeek article on Language Negotiation

Find out the orgunit id of each document

Similar Messages

Maybe you are looking for