How do I find out the exact path of each and every file that LabVIEW finds and loads into memory for a given top level vi?

How do I find out the exact path of each and every file that LabVIEW finds and loads into memory for a given top level vi? There is probably a trivial, easy way to get this info, but I have not yet found it! Thanks..

Or if you want to grab all the paths programatically, try the attached VI.
Open the top level that you want all the paths from and close all others, then open the
attached and run it. It will return an array of all the VIs that the VI
in question uses, including vi.lib VIs. You can filter these as well if
you like.
Ed
Message Edited by Ed Dickens on 08-01-2005 07:01 PM
Ed Dickens - Certified LabVIEW Architect - DISTek Integration, Inc. - NI Certified Alliance Partner
Using the Abort button to stop your VI is like using a tree to stop your car. It works, but there may be consequences.
Attachments:
Get all paths.vi ‏29 KB

Similar Messages

Finding the exact path to a newly created file.

Hello,
In my program I create a new file using a BufferedWriter. This, as you most certainly know, creates the file in the current directory. I'd like to know how do I find out the exact path of the file I just created?
Example: the program is being run from C:\Java. The program creates the file test.txt. How do I figure out that it's C:\Java\test.txt if I don't know for sure what directory the program is being run from?
Thanks,
-Kain

Heh. I feel pretty dumb now. I had been looking at that exact method for about a week now but thinking it wouldn't be as easy as it sounds. After trying it it was pathetically easy. Guess I should always try things first before deeming it impossible by those means.

How to find out the exact culpirit session

How to find out the exact culpirit client machine process to kill the session and release.
Thanks,

We can not directly solve this mystery, only you can do so.
V$SESSION contains data for all connected sessions.
If no unique combination of fields exists that allows you to identify the culprit client session, then you are out of luck.
See you started this thread with the premise that 1 session connected to the DB is a problem.
OK, we will accept this as being true.
Now via SQL how/what can you SELECT so that only 1 row is returned & that row corresponds to "problem client" session?
Since this is YOUR system & not ours, only you can solve this mystery.

How to find out the exact BAdI

hi all,
can any one tell me how to find out the exact badi for the given transaction

Hi,
Execute this report !
It gives you all the badis and user exits present for that particular transaction !
REPORT z_user_exits_n_badis.
TABLES:
tstc,
tadir,
modsapt,
modact,
trdir,
tfdir,
enlfdir,
sxs_attrt ,
tstct.
DATA: jtab LIKE tadir OCCURS 0 WITH HEADER LINE.
DATA: field1(30).
DATA: v_devclass LIKE tadir-devclass.
PARAMETERS:
p_tcode LIKE tstc-tcode,
p_pgmna LIKE tstc-pgmna .
DATA:
wa_tadir TYPE tadir.
u2022     START-OF-SELECTION *
START-OF-SELECTION.
IF NOT p_tcode IS INITIAL.
SELECT SINGLE * FROM tstc WHERE tcode EQ p_tcode.
ELSEIF NOT p_pgmna IS INITIAL.
tstc-pgmna = p_pgmna.
ENDIF.
IF sy-subrc EQ 0.
SELECT SINGLE * FROM tadir
WHERE pgmid = 'R3TR'
AND object = 'PROG'
AND obj_name = tstc-pgmna.
MOVE : tadir-devclass TO v_devclass.
IF sy-subrc NE 0.
SELECT SINGLE * FROM trdir
WHERE name = tstc-pgmna.
IF trdir-subc EQ 'F'.
SELECT SINGLE * FROM tfdir
WHERE pname = tstc-pgmna.
SELECT SINGLE * FROM enlfdir
WHERE funcname = tfdir-funcname.
SELECT SINGLE * FROM tadir
WHERE pgmid = 'R3TR'
AND object = 'FUGR'
AND obj_name EQ enlfdir-area.
MOVE : tadir-devclass TO v_devclass.
ENDIF.
ENDIF.
SELECT * FROM tadir INTO TABLE jtab
WHERE pgmid = 'R3TR'
AND object IN ('SMOD', 'SXSD')
AND devclass = v_devclass.
SELECT SINGLE * FROM tstct
WHERE sprsl EQ sy-langu
AND tcode EQ p_tcode.
FORMAT COLOR COL_POSITIVE INTENSIFIED OFF.
WRITE:/(19) 'Transaction Code - ',
20(20) p_tcode,
45(50) tstct-ttext.
SKIP.
IF NOT jtab[] IS INITIAL.
WRITE:/(105) sy-uline.
FORMAT COLOR COL_HEADING INTENSIFIED ON.
u2022     Sorting the internal Table
SORT jtab BY object.
DATA : wf_txt(60) TYPE c,
wf_smod TYPE i ,
wf_badi TYPE i ,
wf_object2(30) TYPE c.
CLEAR : wf_smod, wf_badi , wf_object2.
u2022     Get the total SMOD.
LOOP AT jtab INTO wa_tadir.
AT FIRST.
FORMAT COLOR COL_HEADING INTENSIFIED ON.
WRITE:/1 sy-vline,
2 'Enhancement/ Business Add-in',
41 sy-vline ,
42 'Description',
105 sy-vline.
WRITE:/(105) sy-uline.
ENDAT.
CLEAR wf_txt.
AT NEW object.
IF wa_tadir-object = 'SMOD'.
wf_object2 = 'Enhancement' .
ELSEIF wa_tadir-object = 'SXSD'.
wf_object2 = ' Business Add-in'.
ENDIF.
FORMAT COLOR COL_GROUP INTENSIFIED ON.
WRITE:/1 sy-vline,
2 wf_object2,
105 sy-vline.
ENDAT.
CASE wa_tadir-object.
WHEN 'SMOD'.
wf_smod = wf_smod + 1.
SELECT SINGLE modtext INTO wf_txt
FROM modsapt
WHERE sprsl = sy-langu
AND name = wa_tadir-obj_name.
FORMAT COLOR COL_NORMAL INTENSIFIED OFF.
WHEN 'SXSD'.
u2022     For BADis
wf_badi = wf_badi + 1 .
SELECT SINGLE text INTO wf_txt
FROM sxs_attrt
WHERE sprsl = sy-langu
AND exit_name = wa_tadir-obj_name.
FORMAT COLOR COL_NORMAL INTENSIFIED ON.
ENDCASE.
WRITE:/1 sy-vline,
2 wa_tadir-obj_name HOTSPOT ON,
41 sy-vline ,
42 wf_txt,
105 sy-vline.
AT END OF object.
WRITE : /(105) sy-uline.
ENDAT.
ENDLOOP.
WRITE:/(105) sy-uline.
SKIP.
FORMAT COLOR COL_TOTAL INTENSIFIED ON.
WRITE:/ 'No.of Exits:' , wf_smod.
WRITE:/ 'No.of BADis:' , wf_badi.
ELSE.
FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
WRITE:/(105) 'No userexits or BADis exist'.
ENDIF.
ELSE.
FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
WRITE:/(105) 'Transaction does not exist'.
ENDIF.
AT LINE-SELECTION.
DATA : wf_object TYPE tadir-object.
CLEAR wf_object.
GET CURSOR FIELD field1.
CHECK field1(8) EQ 'WA_TADIR'.
READ TABLE jtab WITH KEY obj_name = sy-lisel+1(20).
MOVE jtab-object TO wf_object.
CASE wf_object.
WHEN 'SMOD'.
SET PARAMETER ID 'MON' FIELD sy-lisel+1(10).
CALL TRANSACTION 'SMOD' AND SKIP FIRST SCREEN.
WHEN 'SXSD'.
SET PARAMETER ID 'EXN' FIELD sy-lisel+1(20).
CALL TRANSACTION 'SE18' AND SKIP FIRST SCREEN.
ENDCASE.
Thanks
Sarada

How can I find out the number of lines in a text file?

How can I find out the number of lines in a text file?

java.io.BufferedReader in = new java.io.BufferedReader( new java.io.FileReader( "YourFile.txt" ) );
int lineCount = 0;
while( in.readLine() != null )
lineCount ++;
System.out.println( "Line Count = " + lineCount );

How find out the duplicate value from each columns.

I have below four columns,
How can i find out the duplicate value from each columns.
with All_files as (
select '1000' as INVOICE,'2000' AS DELIVERYNOTE,'3000' CANDELINVOICE,'4000' CANDELIVERYNOTE from dual union all
select '5000','6000','7000','8000' from dual union all
select '9000','1000','1100','1200' from dual union all
select '1200','3400','6700','8790' from dual union all
select '1000','2000','3000','9000' from dual union all
select '1230','2340','3450','4560' from dual
SELECT * FROM All_files
Output should be as per below.
1000 2000 3000 4000
9000 1000 1100 1200
1200 3400 6700 8790
1000 2000 3000 9000
Required to check uniqueness in cross columns.
Thanks.

Try this (sorry about the formatting)...
WITH all_files AS (SELECT   '1000' AS INVOICE,
                            '2000' AS DELIVERYNOTE,
                            '3000' CANDELINVOICE,
                            '4000' CANDELIVERYNOTE
                     FROM   DUAL
                   UNION ALL
                   SELECT   '5000',
                            '6000',
                            '7000',
                            '8000'
                     FROM   DUAL
                   UNION ALL
                   SELECT   '9000',
                            '1000',
                            '1100',
                            '1200'
                     FROM   DUAL
                   UNION ALL
                   SELECT   '1200',
                            '3400',
                            '6700',
                            '8790'
                     FROM   DUAL
                   UNION ALL
                   SELECT   '1000',
                            '2000',
                            '3000',
                            '9000'
                     FROM   DUAL
                   UNION ALL
                   SELECT   '1230',
                            '2340',
                            '3450',
                            '4560'
                     FROM   DUAL),
    t_base
       AS (SELECT      invoice
                    || ','
                    || deliverynote
                    || ','
                    || candelinvoice
                    || ','
                    || candeliverynote
                       str
             FROM   all_files),
    t_str
       AS (SELECT   str || ',' AS str,
                    (LENGTH (str) - LENGTH (REPLACE (str, ','))) + 1
                       AS no_of_elements
             FROM   t_base),
    t_n_rows
       AS (    SELECT   LEVEL AS i
                 FROM   DUAL
           CONNECT BY   LEVEL <=
                           (    SELECT   SUM (no_of_elements) FROM t_str)),
    t_build AS (SELECT   t_str.str,
                         nt.i AS element_no,
                         INSTR (t_str.str,
                                DECODE (nt.i, 1, 0, 1),
                                DECODE (nt.i, 1, 1, nt.i - 1))
                         + 1
                            AS start_pos,
                         INSTR (t_str.str,
                                1,
                                DECODE (nt.i, 1, 1, nt.i))
                            AS next_pos
                  FROM      t_str
                         JOIN
                            t_n_rows nt
                         ON nt.i <= t_str.no_of_elements),
    t_build2
       AS (SELECT   RTRIM (str, ',') AS original_string,
                    SUBSTR (str, start_pos, (next_pos - start_pos))
                       AS single_element,
                    element_no
             FROM   t_build),
    t_build3
       AS (SELECT   single_element,
                    COUNT( * )
                       OVER (PARTITION BY single_element
                             ORDER BY single_element)
                       ele_count
             FROM   t_build2)
SELECT   DISTINCT INVOICE,
                  DELIVERYNOTE,
                  CANDELINVOICE,
                  CANDELIVERYNOTE
FROM   all_files, t_build3
WHERE   ele_count > 1
         AND (   INVOICE = single_element
              OR DELIVERYNOTE = single_element
              OR CANDELINVOICE = single_element
              OR CANDELIVERYNOTE = single_element)I think this will be faster than the previous solution?
Cheers
Ben
Edited by: Munky on Feb 17, 2011 2:11 PM - "I think this will be faster than the previous solution?", nope - it's not :(

Find out the orgunit id of each document

hello guys...
i execute fm 'crm_order_read' for all the guid to recover the orgunit id of the doc.
after that i want to find out the orgunit id of each document.and how they are link ...

thanks for reply raj.
but my requirment is i have to capture org unit id as display in transaction PPOMA_CRM for example when u goes to the transaction u can c for perticular bussiness partner u c there is one id like O 50000402
i want to capture this id for perticlar doc.

How can I open and edit files that were developed and published by ftp to my host on my old macbook, which I can no longer access.

How can I open and edit files that were developed and published via ftp to my host on my old macbook, which I can no longer access. The HD containing the files cannot be accessed. I want to be able to download the published files to be edited in iweb?

You CAN'T download published files and then edit them in iWeb because iWeb can't open them - it has no import facility so is unable to open any html or css files - a previously published site.
You can download these files yes, but you'll need to use them as a guide or to cut and paste text from there whilst you re-build your site in iWeb.
The only other way is to download the files and then open them with an html editor such as TextWrangler or use one of the other web design programmes out there that is capable of importing html and css such as Dreamweaver of Flux 4.
These are your only alternatives as iWeb can't import and if you want to continue to use iWeb, then you'll have to re-build your site from scratch. If you do just remember to back up your domain.sites file this time around - it is found under your User/Library/Applicaion Support/iWeb/domain.sites.

How to find out the exact version of web server 7.0

Dear all,
I am using currently web server 7.0 and in error logs its shows me following version
Sun Java System Web Server 7.0 B12/04/2006 10:15
what i need how to find out what exact version i am using in my webserver 7.0 is it update 6 or update 7 or update 8
how to find out what exact version i am using in web server 7.0.....
thanks and regards
tiger

Web Server tells you specifically which Update release in the string you quote (in your string you are running the original release of Web Server 7.0).
My server is currently running Web Server 7.0 Update 7. The startup string looks like:
[19/Jan/2010:11:18:27] info (15407): CORE1116: Sun Java System Web Server 7.0U7 B12/14/2009 22:58

How to find out the exact reason for backordered order in oracle apps R12

Hi,
I am new to OM module.I booked an order and trying to do "pick release" the booked order but i couldn't do so, because the order is getting backordered.
These are the things i checked
1.On-hand quantity for the particular item i am booking is sufficient enough
2.Item is in M1 org and onhand quantity is also in same org.
Can you please help me how to find the exact reason for my order getting backordered.
Regards
Sandeep.G

Hi Sandeep,
Reasons for pick release resulting in back ordered can be found here:
Reasons for a Sales Order to get Backordered!
Failing pick release, orders getting backordered and other common issues with picking.
Please review notes:
Cannot Pick Release Items, Completes with Warning and the Item is Backordered. (Doc ID 1240404.1)
Pick Release Process Completes In Warning Line Gets Backordered Though Onhand Is Present (Doc ID 1285514.1)
Pick Release Backorders Sales Order Lines, Error in Log File "No Mtl_Sales_Order ID found for oe header" (Doc ID 398385.1)
Reservation Remains After Pick Release Of Backordered Move Order (Doc ID 754518.1)
In addition, please review:
What is Back Order in OM? How are Backorders Handled | Oracle Apps
Thanks &
Best Regards,

How to find out the exact time in UK with daylight savings.

Hi,
how can i get the exact time in UK even if the daylight savings time is implemented in UK..,
now my code is implemented for IST ,how can i get the BST timings?
Thankx.

the setTimeZone method of SimpleDateFormat (actually inherited from DateFormat). Use it to set it to your timezone when parsing or formatting a date string for your timezone and set it to the UK timezone when parsing or formatting a date string for their timezone.
Edit: IOW SimpleDateFormat was the answer, not a question.

How can I find out the exact date or just month an...

Can you help me on the above question??

It's not written on your account, but you may contact customer service they might be able to help you: https://support.skype.com/en/faq/FA1170/How-can-I-contact-Skype-Customer-Service
Andre
If answer was helpful please mark it with Kudos and if issue is resolved mark it with solution. This will help other users find this answer more easily. Thanks in advance!

How to find out the exact string in a single line?

Hi,
I have some data in table like below.
CERTTEST
CERT TEST
CERT
My requirement is fetch only CERT as a output.
Please share your thoughts.
Thanks

Not sure what's the issue:
with t as (
           select 'CERTTEST' str from dual union all
           select 'CERT TEST' from dual union all
           select 'CERT' from dual
-- end of data sample
select str
from t
where str = 'CERT'
STR
CERT
SQL> SY.
P.S. And if you need to seclect case insensitive CERT, use:
SQL> with t as (
2             select 'CERTTEST' str from dual union all
3             select 'CERT TEST' from dual union all
4             select 'CeRt' from dual union all
5             select 'CERT' from dual
6            )
7 -- end of data sample
8 select str
9    from t
10    where upper(str) = 'CERT'
11 /
STR
CeRt
CERT
SQL>

How can I find out the tempo of an imported quicktime audio file?

Hi. I'm trying to improve my music production skills by emulating the tracks of techno artists that I like.
My idea is to import one of their mp3 files into an audio track in Logic, so that I can see how they developed their songs.
After I import the song, it plays fine. But is there anyway to make it so that the track matches up with the grid without altering the tempo of the track itself? Somehow I think if I knew what the tempo for the track was, I could just adjust the tempo for the project and the song would fall in sync with the grid.
Any ideas?
Thanks.

You can find a BPM Counter in the metering folder in your audio plug ins. Just pop that baby on the track you're trying to analyze, hit play, and it will calculate the BPM. Then set the track to that and you're good to go.
Check out this video too on Beat Mapping, it's got a lot of cool info:
http://www.youtube.com/watch?v=aqS1UX51teQ

How do I find out the duration of a clip?

How do I find out the exact duration of a clip?
The only way I can do at the moment is to move the mouse to the edge of the clip
This is anoying and fiddly
Is there a better way?
Thanks
Omar

Sure it is
One selected 6:28. Best thing is it will total up multiple selections.

How do I find out the exact path of each and every file that LabVIEW finds and loads into memory for a given top level vi?

Similar Messages

Maybe you are looking for