Find texts with more than one Character Style applied

Hi,
If you need to find - and replace/restyle - texts where more than one Character Style is applied - here is tool for you - for ID CS3 and ID CS4:
http://www.adobescripts.com/search.php?query=multi+findreplace+grep&action=results
You can define options for up to 8 characters - by using GREP expressions.
Script is only for PC platform.
robin
www.adobescripts.com

Never tried with bullets but nested styles might work... I think you can chain two or more nested style, and then you can define first nested style to effect only first character, second nested style to next character and so on....

Similar Messages

When texting with more than one person at a time the incoming text scrolls to top of the conversation. anyone out there with the same issue?

while texting with more than one person at a time the incoming texts scrolls to top of conversation. anyone having this issue?

I've heard claims it can be done, claims some have done it, and claims that it didn't work for them. This thread is interesting, some indications it should be possible, complaints that it didn't, and also an interesting work-around:
"How do I text message multiple people at once?"
http://discussions.apple.com/click.jspa?searchID=-1&messageID=4822260
You can ask Apple for iPhone changes via this link:
http://www.apple.com/feedback/iphone.html
Though if you're requesting hardware changes for iPhone v2 you may want to wait a week (or a month?)...they're probably going to be inundated right now by requests for software changes to the current iPhone.
(If this has answered your question, please mark your original post as answered)

Trouble nesting more than one Character Style...

I am trying to create the below heading in CS5 on a Mac:
Lesson 2.1: Who am I?
So I made the Lesson 2.1 a character style called "Lesson #." And then I made Who am I? a paragraph style called "Lesson title" and nested the "Lesson #" though 1 colon. And that worked great. But then I felt like the space between "Lesson #" and "Lesson Title" was too big. (This seems really nit-picky I know but the boxes the lesson titles need to fit in are small and the titles vary in length so I was trying to save all the space I could for the longer titles.)
Lesson 2.1: Who am I?
So I made the space (see the underline above) a character style of it's own that was the same as the "Lesson Title" in all aspects except that it was 11 pt font. I then made this a nested style in the "Lesson Title" that came after "Lesson #" through 1 letter.
But it doesn't seem to be working very well...which made me question if there was something else I needed to do in order to nest more than one character style? Or whether I should be even approaching this issue in this way....
Thank you for any thoughts on this!

YES!!! IT WORKED! I think InDesign and I are now friends. All my styles are working! (knock on wood.)
Weird that the horizontal scaling would work though and not changing the font size? or maybe I jsut don't understand exactly how InDesign thinks yet...

Document/literal style wsdl with more than one port

Recently I have changed wsdl style from rpc/encoded to document/literal as BPEL does not handle soapenc:arrayType. The wsdl contains 2 operations and few complex type definitions.
In BPEL Designer I have created a process that invokes all operations defined in the wsdl, but only one of them will have some data in the response message and the other one will have an empty message. On the other hand, when I use stub generation to invoke Web Service everything is working fine.
If I provide separate wsdl for each operation (in BPEL process I would have two partnerLinks instead of one) than it works fine.
Does this mean that BPEL does not handle document/literal style endpoints with more than one port (operation)?
I have tested this with the orabpel_2.0_J1_win32.exe and orabpel_2.0rc9_win32.exe. Web Services, used for this test, are deployed in Jboss 3.2.3 and axis-1_2beta3.
WSDL used as partnerLink:
<?xml version="1.0" encoding="UTF-8" ?>
<wsdl:definitions targetNamespace="http://test" xmlns:apachesoap="http://xml.apache.org/xml-soap" xmlns:impl="http://test" xmlns:intf="http://test" xmlns:wsdl="http://schemas.xmlsoap.org/wsdl/" xmlns:wsdlsoap="http://schemas.xmlsoap.org/wsdl/soap/" xmlns:xsd="http://www.w3.org/2001/XMLSchema">
<wsdl:types>
<schema elementFormDefault="qualified" targetNamespace="http://test" xmlns="http://www.w3.org/2001/XMLSchema">
<complexType name="CardId">
<sequence>
<element name="cardType" nillable="true" type="xsd:string" />
<element name="number" nillable="true" type="xsd:string" />
</sequence>
</complexType>
<complexType name="CardIdArray">
<sequence>
<element maxOccurs="unbounded" name="item" nillable="true" type="impl:CardId" />
</sequence>
</complexType>
<element name="getCardsReturn" type="impl:CardIdArray" />
<complexType name="CardholderCards">
<sequence>
<element maxOccurs="unbounded" name="cards" nillable="true" type="impl:CardId" />
<element name="serialNumber" nillable="true" type="xsd:string" />
</sequence>
</complexType>
<element name="retrieveChReturn" type="impl:CardholderCards" />
</schema>
</wsdl:types>
<wsdl:message name="retrieveChRequest" />
<wsdl:message name="getCardsRequest" />
<wsdl:message name="retrieveChResponse">
<wsdl:part element="impl:retrieveChReturn" name="retrieveChReturn" />
</wsdl:message>
<wsdl:message name="getCardsResponse">
<wsdl:part element="impl:getCardsReturn" name="getCardsReturn" />
</wsdl:message>
<wsdl:portType name="TestService">
<wsdl:operation name="getCards">
<wsdl:input message="impl:getCardsRequest" name="getCardsRequest" />
<wsdl:output message="impl:getCardsResponse" name="getCardsResponse" />
</wsdl:operation>
<wsdl:operation name="retrieveCh">
<wsdl:input message="impl:retrieveChRequest" name="retrieveChRequest" />
<wsdl:output message="impl:retrieveChResponse" name="retrieveChResponse" />
</wsdl:operation>
</wsdl:portType>
<wsdl:binding name="TestServiceSoapBinding" type="impl:TestService">
<wsdlsoap:binding style="document" transport="http://schemas.xmlsoap.org/soap/http" />
<wsdl:operation name="getCards">
<wsdlsoap:operation soapAction="" />
<wsdl:input name="getCardsRequest">
<wsdlsoap:body use="literal" />
</wsdl:input>
<wsdl:output name="getCardsResponse">
<wsdlsoap:body use="literal" />
</wsdl:output>
</wsdl:operation>
<wsdl:operation name="retrieveCh">
<wsdlsoap:operation soapAction="" />
<wsdl:input name="retrieveChRequest">
<wsdlsoap:body use="literal" />
</wsdl:input>
<wsdl:output name="retrieveChResponse">
<wsdlsoap:body use="literal" />
</wsdl:output>
</wsdl:operation>
</wsdl:binding>
<wsdl:service name="TestServiceService">
<wsdl:port binding="impl:TestServiceSoapBinding" name="TestService">
<wsdlsoap:address location="http://localhost:8080/axis/services/TestService" />
</wsdl:port>
</wsdl:service>
</wsdl:definitions>

Hi Dragana,
We definitely support the ability to call a web service that exposes two operations (document/literal or not).
Glancing through your WSDL, it looks good.
Could you please try to tunnel the second request and see 1) what data is sent to the service and 2) what data is returned by the service?
Can you please email us a reproduceable case so that we can help troubleshoot in parallel?
Thank you,
Edwin
[email protected]
please rename .zip to .zap

Find and Replace more then one character

Hi
I need to find and replace more then one character. for example: I need to replace "A" with "a". "B" with "b" and so on. how to do that in one search?

See the following script by Peter Kahrel:
Change case
http://www.kahrel.plus.com/indesign/grep_change_case.html
If the "A" and the "B" are in arbitrary positions in your text you could use the following GREP:
[AB]
together with the script.
For testing your GREP expressions, you could use the following script, also by Peter Kahrel:
A GREP editor
http://www.kahrel.plus.com/indesign/grep_editor.html
Uwe

Is there a stereo bluetooth headset that can pair with more than one device at a time?

Is there a stereo bluetooth headset that can pair, i.e. multipoint, with more than one device at a time?
Are the MacBook and iPhone 4 capable of multipoint bluetooth technoloagy?
The goal is for my wife to be able to watch her Korean TV soap operas on her MacBook and still receive a call on her iPhone 4 via a stereo bluetooth headset.
I was looking at the Motorola S10-HD but after further review saw that it only pairs with one device at a time.
Appreciate any and all input. My Googling has returned no results.
Rick

TeslasBB wrote:
pairing my BB8330 with my blue tooth earphone(TM:jawbone) and my microsoft sync thats in my car simultaneously? if i pair with the car, will i have to pair my jawbone all over again?
You can only pair one device at a time to your 8330, or any other phone for that matter. The "pairings" are saved to the phone, you can use one or the other and you won't have to pair it again. Once you turn your bluetooth device on and the phone is on, they will find each other again.
Hope this helps,
John
Stevie Ray! 1954-1990
** Don't forget to resolve your post with the accepted solution.

Can I use a magic trackpad with more than one Mac at a time?

I am attempting to pair a MTP with a second MacBook Pro. So far I can't get system preferences to find the MTP.
I am wondering whether the MTP can be paired with only one Mac at a time, and that this is why my MBP won't find it.
The reason I am thinking this is because the little booklet that comes with the MTP says 'after you pair your MTP with a Mac, you can pair it again with a different Mac. To do this, you first remove the existing pairing and then pair the trackpad again'.
Can anyone advise, please?
If it can be paired with more than one MBP at a time, any suggestions why my system preferences search for the MTP is not producing any results?
Thanks

Yes, your keyboard, mouse or trackpad can be paired with multiple Macs. You can even have multiple keyboards, mice or trackpads paired with one Mac. The caveat is that the device can only be connected to one Mac at a time. The device can't be paired or connected with a Mac while it's currently connected to another.
Pairing a device with 2 Macs will be troublesome if the Macs are located within 33 ft of each other. The device will connect with the first available paired Mac and then unavailable to the second. If the Macs are located outside the 10meter range, it's quite easy to power off the keyboard (forcing a disconnect) then walking the keyboard to Mac 2 and powering the keyboard on. I do this with a keyboard from my iMac to a Mac Mini in another room.
Captfred

On some pages the text from more than one paragraph stack up on top of each other, like writing something then writing something else on top of it.

On some pages the text from more than one paragraph stack up on top of each other, like writing something then writing something else over the top of it. Some pages will run text and pictures together, like a car rear-ending another or a train pile up. Other pages will cut an image or text short, i.e. it will display a portion of the top of the image or text but not the rest. This happens on Amazon for example, the section where it says "Customers who looked at this also looked at" will allow only a certain amount of the upper portion of the description immediately below the picture of the product but below that section everything is fine until I get to another section displaying more products and their descriptions and then it cuts the bottom portions off again. I've noticed this behavior mostly in the sections with product photos, the text sections seem okay. YouTube also displays this behavior. It's even doing it on this page right now. Below this box I can read "The more information you can provide the better chance your question will be answered " , but directly below that in the next sentence I can see the start of it with "Troublshootin" and the "Automatically Add" in a green field covering the "g". The next clear text is "A window will open in the top corner. Click Allow, and then click Install. If the automated way doesn't work, try these manual steps." I tried turning of pre-fetching, clearing history, cookies, and cache, scanning for malware with Avast and Windows Defender all to no avail. It began when I upgraded from dial up to DSL via AT&T Uverse. I have a Motorola NVG510 modem. The modem was replaced an hour ago along with new dedicated lines and DSL/Phone splitter from the box by an AT&T technician to make sure my incoming lines were up to par. He ran a connection test and verified everything is up to standards. IE does not display this behavior. I am running Firefox20.0.1 and all previous versions have acted the same way since I upgraded to DSL about 3 months ago.

If you have increased the minimum font size then try the default setting "none" in case the current setting is causing problems.
*Tools > Options > Content : Fonts & Colors > Advanced > Minimum Font Size (none)
Make sure that you allow websites to choose their fonts.
*Tools > Options > Content : Fonts & Colors > Advanced: [X] "Allow pages to choose their own fonts, instead of my selections above"
It is better not to increase the minimum font size, but use an extension to set the default page zoom to prevent issues with text not being displayed properly.
You can use an extension to set a default font size and page zoom on web pages.
*Default FullZoom Level: https://addons.mozilla.org/firefox/addon/default-fullzoom-level/
*NoSquint: https://addons.mozilla.org/firefox/addon/nosquint/

How can i find out the more than one times occurance of integer in a array?

How can i find out the more than one occurance of integer in a array. Assume i have 2,2,3,4,2,5,4,5 in a Array and i need to find out the how many times of 2, 5 and 4 is exists in that array. Please some one help me as sson as possible. thanks in advance....

Kumar_Mohan wrote:
How can i find out the more than one occurance of integer in a array. Assume i have 2,2,3,4,2,5,4,5 in a Array and i need to find out the how many times of 2, 5 and 4 is exists in that array. Sort the array. Then loop through it and compare each i-th element with the (i+1)-th element.
Please some one help me as sson as possible. thanks in advance....In future postings, please refrain from telling that it is urgent, or you need help ASAP. It is rather rude to do so.

RegionRenderer encodeAll The region component with id: pt1:r1 has detected a page fragment with multiple root components. Fragments with more than one root component may not display correctly in a region and may have a negative impact on performance.

Hi,
I am using JDEV 11.1.2.1.0
I am getting the following error :-
<RegionRenderer> <encodeAll> The region component with id: pt1:r1 has detected a page fragment with multiple root components. Fragments with more than one root component may not display correctly in a region and may have a negative impact on performance. It is recommended that you restructure the page fragment to have a single root component.
Piece of code is for region is:-
 <f:facet name="second">
 <af:panelStretchLayout id="pa1"
 binding="#{backingBeanScope.Assign.pa1}">
 <f:facet name="center">
 <af:region value="#{bindings.tfdAssignGraph1.regionModel}" id="r1"
 binding="#{backingBeanScope.Assign.r1}"/>
 </f:facet>
 </af:panelStretchLayout>
 </f:facet>
How do I resolve it ?
Thanks,

Hi,
I see at least 3 errors
1. <RegionRenderer> <encodeAll> The region component with id: pt1:r1 has detected a page fragment with multiple root components.
the page fragment should only have a single component under the jsp:root tag. If you see more than one, wrap them in e.g. an af:panelGroupLayout or af:group component
2. SAPFunction.jspx/.xml" has an invalid character ".".
check the document (you can open it in JDeveloper if the customization was a seeded one. Seems that editing this file smething has gone bad
3. The expression "#{bindings..regionModel}" (that was specified for the RegionModel "value" attribute of the region component with id "pePanel") evaluated to null.
"pageeditorpanel" does seem to be missing in the PageDef file of the page holding the region
Frank

How to generate a certificate request with more than one OU?

We're using Sun Java System Web Server 6.1 SP4. The Corp. has it's own CA and organize their certificates in a hierarchical rule with more then one organization unit (OU) in a chain.
So what we need is generate a certificate requeste with more than one OU, but the Web Server wizard has only one text field for it. We've already tried to fill in this field the complete chain of OUs like "ou=orgX, ou=deptY, ou=secZ" and didn't work either.
Thank's in advance,
Jeff!

Do you have tried with the command line "certutil" ?
#<SERVER-ROOT>/bin/https/admin/bin/certutil

Can i record with more than one audio interface

I need to record 16 tracks, I have two different audio iterface, in GarageBand i can only find one of them, if i go to prefrenses-audio, I can set any of them as my audio interface, but only one at the time.
Any tips to how I can use bouth simultanious? Cubase, Logic mabye, GarageBand no can do? :-)

josteinfromoslo wrote:
can i record with more than one audio interface
yes, create an aggregate device:
http://www.bulletsandbones.com/GB/Tutorials.html#allaboutaggregatedevices
(Let the page FULLY load. The link to your answer is at the top of your screen)
josteinfromoslo wrote:
I need to record 16 tracks
GB can only record 8 tracks at a time, however that is 16 channels, so with some extra effort you can get the outcome you desire, see the second tip here:
http://www.bulletsandbones.com/GB/TricksHacks.html

Textfield validation with more than one format

Hi,
I've seen in the past a solution to validate a texfield with more than one format.
Unfortunately, I can't find it back.
I would like to validate the format of Dutch licencenumbers.
There are several formats like:
AA-12-34
12-34-AA
AA-12-AA
AA-AA-12
12-AA-AA
12-AAA-0
one of those formats must be right for validation.
Can sombody give a hint how to do this validation?
Regard,
Jan

Thank a lot!!
I was just forgotten to end the separate groups with a dollar $ sign.
many thanks
Jan

Fill BEx Variable with more than one value via Custom Exit

Dear SDN comunity,
I want to fill a BEx Variable via a custom exit. My problem is, I don't know how to fill this variable with more than one value.
I try to give you some background info based on an exaple:
Variable-Details
Type of Variable: Characteristic Value
Variable Name: ZCCD
Description: Company Code Selection
Processing by: Custom Exit
Characteristic: Company Code
Variable Represents: Multiple Single Values
This is the used ABAP code:
WHEN 'ZCCD'.
CLEAR l_s_range.
l_s_range-low = '2002;2004'.
l_s_range-sign = 'I'.
l_s_range-sign = 'EQ'.
APPEND l_s_range TO e_t_range.
The system returns this message:
Value "2002;2004" is too long for variable ZCCD
appreciate your help!
//michael

Eugene, Marcus
it works now, thx a lot!
Please find attached the final code:
CLEAR l_s_range.
l_s_range-low = '2002'.
l_s_range-sign = 'I'.
l_s_range-opt = 'EQ'.
APPEND l_s_range TO e_t_range.
CLEAR l_s_range.
l_s_range-low = '2004'.
l_s_range-sign = 'I'.
l_s_range-opt = 'EQ'.
APPEND l_s_range TO e_t_range.
(Delta to Marcus's code is bold)

Reports 9i Graphs with more than one query..

Hello,
I am converting my 6i reports to 9i reports. On my graph reports with more than one query, when I invoke the graph wizard it changes the value of the src to the wrong query automatically. When I run my report, I am getting the error REP-0069 Internal Error rwlib-1: REP-6219 Column (Column Name) not in given cursor hierarchy. Although it's a pretty easy fix to go into the graph settings in the property palette and change it back, it is extremely frustrating. Has anyone else ran into this problem and did you find a permanent fix?
Thanks,
Laura

Hi Laura
One workround would be to create a new query in the Data Model that includes desired fields, and then source
chart to the new group.
FYi, bug2527100 was filed on this issue and is already fixed. The fix would be available in 9i Reports 9.0.2.2 patch. Reports 9.0.2.2 patch is scheduled to be released on Mar 05 2003 (tentative date).
Thanks
The Oracle Reports Team

Find texts with more than one Character Style applied

Similar Messages

Maybe you are looking for